SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The function simply alias and hides the real event function.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
qemu_input_event_send() discards key event when the guest is paused,
but not the delay.
The delay ends up in the input queue, and qemu_input_event_send_key()
will further fill the queue with upcoming events.
VNC uses qemu_input_event_send_key_delay(), not SPICE, which results
in a different input behaviour on pause: VNC will queue the events
(except the first that is discarded), SPICE will discard all events.
Don't queue delay if paused, and provide same behaviour on SPICE and
VNC clients on resume (and potentially avoid over-allocating the
buffer queue)
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1444326
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170425130520.31819-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Apply a limit to the number of items we accept into the keyboard queue.
Impact: Without this limit vnc clients can exhaust host memory by
sending keyboard events faster than qemu feeds them to the guest.
Fixes: CVE-2017-8379
Cc: P J P <ppandit@redhat.com>
Cc: Huawei PSIRT <PSIRT@huawei.com>
Reported-by: jiangxin1@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170428084237.23960-1-kraxel@redhat.com
macOS 10.12 deprecated/replaced many AppKit constants to make naming
more consistent. Use the new constants, and #define them to the
old constants when compiling against a pre-10.12 SDK.
Signed-off-by: Brendan Shanks <brendan@bslabs.net>
Message-id: 20170425062952.99149-1-brendan@bslabs.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Catch an invalid state early, before a potential use-after-free. This is
mainly useful for documentation purposes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170406120513.638-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We have quite a few switches over SocketAddressKind. Some have case
labels for all enumeration values, others rely on a default label.
Some abort when the value isn't a valid SocketAddressKind, others
report an error then.
Unify as follows. Always provide case labels for all enumeration
values, to clarify intent. Abort when the value isn't a valid
SocketAddressKind, because the program state is messed up then.
Improve a few error messages while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1490895797-29094-4-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Certain features make sense only with certain address families. For
instance, passing file descriptors requires AF_UNIX. Testing
SocketAddress's saddr->type == SOCKET_ADDRESS_KIND_UNIX is obvious,
but problematic: it can't recognize AF_UNIX when type ==
SOCKET_ADDRESS_KIND_FD.
Mark such tests of saddr->type TODO. We may want to check the address
family with getsockname() there.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-2-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The evdev devices in input-linux.c are read in blocks of one whole
event. If there are not enough bytes available, they are discarded,
instead of being kept for the next read operation. This results in
lost events, of even non-working devices.
This patch keeps track of the number of bytes to be read to fill up
a whole event, and then handle it.
Changes from v1 to v2:
- Fix: Calculate offset on each iteration
Changes from v2 to v3:
- Fix coding style
- Store offset instead of bytes to be read
Signed-off-by: Javier Celaya <jcelaya@gmail.com>
Message-id: 20170327182624.2914-1-jcelaya@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous commit (8bb93c6f99) using async_safe_run_on_cpu() doesn't
work on graphics sub-system which restrict which threads can do GUI
updates. Rather the special casing MacOS we just directly call the
helper and move all the exclusive handling into do_dafe_dpy_refresh().
The unfortunate bouncing of the BQL is to ensure there is no deadlock
as vCPUs waiting on the BQL are kicked into their quiescent state.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
I missed the fact that when an exclusive work item runs it drops the
BQL to ensure all no vCPUs are stuck waiting for it, hence causing a
deadlock. However the actual helper needs to take the BQL especially
as we'll be messing with device emulation bits during the update which
all assume BQL is held.
We make a minor cpu_reloading_memory_map which must try and unlock the
RCU if we are actually outside the running context.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
vnc server in reverse mode (qemu -vnc localhost:$nr,reverse) interprets
$nr as display number (i.e. with 5900 offset) in recent qemu versions.
Historical and documented behavior is interpreting $nr as port number
though. So we should bring code and documentation in line.
Given that default listening port for viewers is 5500 the 5900 offset is
pretty inconvinient, because it is simply impossible to connect to port
5500. So, lets fix the code not the docs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1489480018-11443-1-git-send-email-kraxel@redhat.com
Unfortunaly switching to getPlatformDisplayEXT isn't as easy as
implemented by 0ea1523fb6. See the
longish comment for the complete story.
Cc: Frediano Ziglio <fziglio@redhat.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489997042-1824-1-git-send-email-kraxel@redhat.com
... and drop OPENGL_CFLAGS from Makefiles.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1490079888-29029-1-git-send-email-kraxel@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 8d04fb55..
tcg: drop global lock during TCG code execution
..broke the assumption that updates to the GUI couldn't happen at the
same time as TCG vCPUs where running. As a result the TCG vCPU could
still be updating a directly mapped frame-buffer while the display
side was updating. This would cause artefacts to appear when the
update code assumed that memory block hadn't changed.
The simplest solution is to ensure the two things can't happen at the
same time like the old BQL locking scheme. Here we use the solution
introduced for MTTCG and schedule the update as async_safe_work when
we know no vCPUs can be running.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20170315144825.3108-1-alex.bennee@linaro.org
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[ kraxel: updated comment clarifying the display adapters are buggy
and this is a temporary workaround ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is a special code path (dpy_gfx_copy) to allow graphic emulation
notify user interface code about bitblit operations carryed out by
guests. It is supported by cirrus and vnc server. The intended purpose
is to optimize display scrolls and just send over the scroll op instead
of a full display update.
This is rarely used these days though because modern guests simply don't
use the cirrus blitter any more. Any linux guest using the cirrus drm
driver doesn't. Any windows guest newer than winxp doesn't ship with a
cirrus driver any more and thus uses the cirrus as simple framebuffer.
So this code tends to bitrot and bugs can go unnoticed for a long time.
See for example commit "3e10c3e vnc: fix qemu crash because of SIGSEGV"
which fixes a bug lingering in the code for almost a year, added by
commit "c7628bf vnc: only alloc server surface with clients connected".
Also the vnc server will throttle the frame rate in case it figures the
network can't keep up (send buffers are full). This doesn't work with
dpy_gfx_copy, for any copy operation sent to the vnc client we have to
send all outstanding updates beforehand, otherwise the vnc client might
run the client side blit on outdated data and thereby corrupt the
display. So this dpy_gfx_copy "optimization" might even make things
worse on slow network links.
Lets kill it once for all.
Oh, and one more reason: Turns out (after writing the patch) we have a
security bug in that code path ...
Fixes: CVE-2016-9603
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489494419-14340-1-git-send-email-kraxel@redhat.com
Add the ability for the user to use .toast files with QEMU. This format works
just like ISO files.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 0C9DA454-E3DC-4291-806E-9A96557DE833@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
XkbGetKeyboard does not work in XWayland and even on non-Wayland
X11 servers its use is discouraged:
https://bugs.freedesktop.org/show_bug.cgi?id=89240
This resolves a problem whereby QEMU prints
"could not lookup keycode name"
on startup when running under XWayland. Keymap handling is
however still broken after this commit, since Xwayland is
reporting a keymap we can't handle
"unknown keycodes `(unnamed)', please report to qemu-devel@nongnu.org"
NB, native Wayland support (which is the default under GTK3) is
not affected - only XWayland (which can be requested with GDK_BACKEND
on GTK3, and is the only option for GTK2).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170227132343.30824-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Helper function (and DisplayChangeListenerOps ptr) to disable scanouts.
Replaces using dpy_gl_scanout_texture with 0x0 size and no texture
specified.
Allows cleanups to make the io and gfx emulation code more readable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487669841-13668-3-git-send-email-kraxel@redhat.com
We'll add a variant which accepts dmabufs soon. Change
the name so we can easily disturgish the two variants.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487669841-13668-2-git-send-email-kraxel@redhat.com
When multiple GPU are available, picking the first one isn't always the
best choice. Learn to specify a device rendernode.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170212112118.16044-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This change allows the listen address and websocket address
options for -vnc to be repeated. This causes the VNC server
to listen on multiple addresses. e.g.
$ $QEMU -vnc vnc=localhost:1,vnc=unix:/tmp/vnc,\
websocket=127.0.0.1:8080,websocket=[::]:8081
results in listening on
127.0.0.1:5901, 127.0.0.1:8080, ::1:5901, :::8081 & /tmp/vnc
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-9-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove the limitation that the VNC server can only listen on
a single resolved IP address. This uses the new DNS resolver
API to resolve a SocketAddress struct into an array of
SocketAddress structs containing raw IP addresses. The VNC
server will then attempt to listen on all resolved IP addresses.
The server must successfully listen on at least one of the
resolved IP addresses, otherwise an error will be reported.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-7-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code which takes a SocketAddress and connects/listens on the
network is going to get more complicated to deal with multiple
listeners. Pull it out into a separate method to avoid making the
vnc_display_open method even more complex.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-6-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code which interprets the CLI args to populate the SocketAddress
objects for plain & websockets VNC is quite complex already and will
need further enhancements shortly. Refactor it into separate methods
to avoid vnc_display_open getting even larger. As a side effect of
the refactoring, it is now possible to specify a listen address for
the websocket server explicitly. e.g,
-vnc localhost:5900,websockets=0.0.0.0:8080
will listen on localhost for the plain VNC server, but expose the
websockets VNC server on the public interface. This refactoring
also removes the restriction that prevents enabling websockets
when the plain VNC server is listening on a UNIX socket.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-5-berrange@redhat.com
[ kraxel: squashed clang build fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently there is only a single listener for plain VNC and
a single listener for websockets VNC. This means that if
getaddrinfo() returns multiple IP addresses, for a hostname,
the VNC server can only listen on one of them. This is
just bearable if listening on wildcard interface, or if
the host only has a single network interface to listen on,
but if there are multiple NICs and the VNC server needs
to listen on 2 or more specific IP addresses, it can't be
done.
This refactors the VncDisplay state so that it holds an
array of listening sockets, but still only listens on
one socket.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the VNC authentication info is emitted at the
top level of the query-vnc-servers data. This is wrong
because the authentication scheme differs between plain
and websockets when TLS is enabled. We should instead
report auth against the individual servers. e.g.
(QEMU) query-vnc-servers
{
"return": [
{
"clients": [],
"id": "default",
"auth": "vencrypt",
"vencrypt": "x509-vnc",
"server": [
{
"host": "127.0.0.1"
"service": "5901",
"websocket": false,
"family": "ipv4",
"auth": "vencrypt",
"vencrypt": "x509-vnc"
},
{
"host": "127.0.0.1",
"service": "5902",
"websocket": true,
"family": "ipv4",
"auth": "vnc"
}
]
}
]
}
This also future proofs the QMP schema so that we can
cope with multiple VNC server instances, listening on
different interfaces or ports, with different auth
setup.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The -vnc argument is documented as accepting two syntaxes for
the 'websocket' option, either a bare option name, or a port
number. If using the bare option name, it is supposed to apply
the display number as an offset to base port 5700. e.g.
-vnc localhost:3,websocket
should listen on port 5703, however, this was broken in 2.3.0 since
commit 4db14629c3
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue Sep 16 12:33:03 2014 +0200
vnc: switch to QemuOpts, allow multiple servers
instead qemu tries to listen on port "on" which gets looked up in
/etc/services and fails.
Fixes bug: #1455912
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When qemu vnc server is trying to send large update to clients,
there might be a situation when system responds with something
like EAGAIN, indicating that there's no system memory to send
that much data (depending on the network speed, client and server
and what is happening). In this case, something like this happens
on qemu side (from strace):
sendmsg(16, {msg_name(0)=NULL,
msg_iov(1)=[{"\244\"..., 729186}],
msg_controllen=0, msg_flags=0}, 0) = 103950
sendmsg(16, {msg_name(0)=NULL,
msg_iov(1)=[{"lz\346"..., 1559618}],
msg_controllen=0, msg_flags=0}, 0) = -1 EAGAIN
sendmsg(-1, {msg_name(0)=NULL,
msg_iov(1)=[{"lz\346"..., 1559618}],
msg_controllen=0, msg_flags=0}, 0) = -1 EBADF
qemu closes the socket before the retry, and obviously it gets EBADF
when trying to send to -1.
This is because there WAS a special handling for EAGAIN, but now it doesn't
work anymore, after commit 04d2529da2, because
now in all error-like cases we initiate vnc disconnect.
This change were introduced in qemu 2.6, and caused numerous grief for many
people, resulting in their vnc clients reporting sporadic random disconnects
from vnc server.
Fix that by doing the disconnect only when necessary, i.e. omitting this
very case of EAGAIN.
Hopefully the existing condition (comparing with QIO_CHANNEL_ERR_BLOCK)
is sufficient, as the original code (before the above commit) were
checking for other errno values too.
Apparently there's another (semi?)bug exist somewhere here, since the
code tries to write to fd# -1, it probably should check if the connection
is open before. But this isn't important.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1486115549-9398-1-git-send-email-mjt@msgid.tls.msk.ru
Fixes: 04d2529da2
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The functions vnc_has_job() and vnc_jobs_clear() are
never used; remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1486146260-8092-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>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=YkDp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/chr-split-pull-request' into staging
# gpg: Signature made Tue 31 Jan 2017 19:32:40 GMT
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/chr-split-pull-request: (41 commits)
char: headers clean-up
char: move parallel chardev in its own file
char: move serial chardev to its own file
char: move pty chardev in its own file
char: move pipe chardev in its own file
char: move console in its own file
char: move stdio in its own file
char: move file chardev in its own file
char: move udp chardev in its own file
char: move socket chardev to its own file
char: move win-stdio into its own file
char: move win chardev base class in its own file
char: move fd chardev in its own file
char: move QIOChannel-related stuff to char-io.h
char: remove unused READ_RETRIES
char: rename and move to header CHR_READ_BUF_LEN
char: move ringbuf/memory to its own file
char: move mux to its own file
char: move null chardev to its own file
char: make null_chr_write() the default method
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only skip surface reallocation in case the old surface was created using
qemu_alloc_display (via qemu_create_displaysurface) too, otherwise we
might end up with a DisplaySurface with the wrong backing storage.
Cc: 1658634@bugs.launchpad.net
Fixes: cd958edb1f
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1485256239-12219-1-git-send-email-kraxel@redhat.com
Commit 2cb5d2a4 removed setlocale() for everything except LC_MESSAGES in
order to avoid unwanted side effects such as using the wrong decimal
separator in generated JSON objects. However, the problem that unsetting
LC_CTYPE caused is that non-ASCII characters are considered
non-printable now and therefore the GTK menus display question marks for
accented letters, Chinese characters etc.
A first attempt to fix this [1] was rejected because even just setting
LC_CTYPE to the user's locale (and thereby modifying the semantics of
the ctype.h functions) could have unwanted effects that we're not aware
of yet.
Recently, however, glibc introduced a new locale "C.utf-8" that just
uses UTF-8 as its charset, but otherwise leaves the semantics alone.
Just setting the right character set is enough for our use case, so we
can just hardcode this one without having to be afraid of nasty side
effects.
Older systems that don't have the new locale will continue displaying
question marks, but this should fix the problem for most users.
[1] https://lists.gnu.org/archive/html/qemu-devel/2015-12/msg03591.html
('Re: gtk: use setlocale() for LC_MESSAGES only')
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170131100945.8189-1-kwolf@redhat.com
[ kraxel: change C.utf-8 to C.UTF-8 ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The class kind is necessary to lookup the chardev name in
qmp_chardev_add() after calling qemu_chr_new_from_opts() and to set
the appropriate ChardevBackend (mainly to free the right
fields).
qemu_chr_new_from_opts() can be changed to use a non-qmp function
using the chardev class typename. Introduce qemu_chardev_add() to be
called from qemu_chr_new_from_opts() and remove the class chardev kind
field. Set the backend->type in the parse callback (when non-common
fields are added).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu_chr_new_from_opts() is modified to not need CharDriver backend[]
array, but uses instead objectified qmp_query_chardev_backends() and
char_get_class(). The alias field is moved outside in a ChardevAlias[],
similar to QDevAlias for devices.
"kind" and "parse" are moved to ChardevClass ("kind" is to be removed
next)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit "bea60dd ui/vnc: fix potential memory corruption issues" is
incomplete. vnc_update_stats must calculate width and height the same
way vnc_refresh_server_surface does it, to make sure we don't use width
and height values larger than the qemu vnc server can handle.
Commit "e22492d ui/vnc: disable adaptive update calculations if not
needed" masks the issue in the default configuration. It triggers only
in case the "lossy" option is set to "on" (default is "off").
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1485248428-575-1-git-send-email-kraxel@redhat.com
Without it, server-mode mouse is "slow" to update position: QXL will
wait until new display commands come. This is very visible with
virtio-gpu.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170130104540.14660-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Solving wishlist item at
https://bugs.launchpad.net/qemu/+bug/1656710
by accepting Ctrl-Alt-= as an additional zoom-in acceleration.
Using gtk_accel_group_connect to support multiple accelerations
triggering a single menu item since that gtk_accel_map_add_entry
seems to support only one acceleration. A wrapper function
gd_accel_zoom_in is added to support gtk_accel_group_connect's
callback activities.
Signed-off-by: Ziyue Yang <skiver.cloud.yzy@gmail.com>
Message-id: 1485826335-15686-1-git-send-email-skiver.cloud.yzy@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Markus Armbruster