We want every user to be specific about the permissions it needs, so
we'll pass the initial permissions as parameters to blk_new(). A user
only needs to call blk_set_perm() if it wants to change the permissions
after the fact.
The permissions are stored in the BlockBackend and applied whenever a
BlockDriverState should be attached in blk_insert_bs().
This does not include actually choosing the right set of permissions
everywhere yet. Instead, the usual FIXME comment is added to each place
and will be addressed in individual patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Instead of qdev_set_parent_bus() silently doing the wrong
thing if it's handed a device that's already on a bus,
have it remove the device from the old bus and add it to
the new one. This is useful for the raspi2 sdcard.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1488293711-14195-2-git-send-email-peter.maydell@linaro.org
Commit a3a3d8c7 introduced a segfault bug while checking for
'dc->vmsd->unmigratable' which caused QEMU to crash when trying to add
devices which do no set their 'dc->vmsd' yet while initialization.
Place a 'dc->vmsd' check prior to it so that we do not segfault for
such devices.
NOTE: This doesn't compromise the functioning of --only-migratable
option as all the unmigratable devices do set their 'dc->vmsd'.
Introduce a new function check_migratable() and move the
only_migratable check inside it, also use stubs to avoid user-mode qemu
build failures.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1487009088-23891-1-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The current QEMU ROM infrastructure rejects late loading of ROMs.
And ELFs are currently loaded as ROM, this prevents delayed loading
of ELFs. So when loading ELF, allow the user to specify if ELF should
be loaded as ROM or not.
If an ELF is not loaded as ROM, then they are not restored on a
guest reboot/reset and so its upto the user to handle the reloading.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The register_read() and register_write() functions expect a bitmask argument.
To avoid duplicated code, a new inlined function register_enabled_mask() is
introduced.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The "qemu,register" device needs to be wired up in source code, there
is no way the user can make any real use of this device with the
"-device" parameter or the "device_add" monitor command yet.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The "or-irq" device needs to be wired up in source code, there is no
way the user can make any real use of this device with the "-device"
parameter or the "device_add" monitor command yet.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.
We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.
Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:
20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm
20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm
The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond
32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm
32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm
We don't benefit significantly, though, when the guest is not fully
loading a host CPU.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bsJJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170222' into staging
ppc patch queue for 2017-02-22
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
# gpg: Signature made Wed 22 Feb 2017 06:29:47 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170222: (43 commits)
hw/ppc/ppc405_uc.c: Avoid integer overflows
hw/ppc/spapr: Check for valid page size when hot plugging memory
target-ppc: fix Book-E TLB matching
hw/net/spapr_llan: 6 byte mac address device tree entry
machine: replace query_hotpluggable_cpus() callback with has_hotpluggable_cpus flag
machine: unify [pc_|spapr_]query_hotpluggable_cpus() callbacks
spapr: reuse machine->possible_cpus instead of cores[]
change CPUArchId.cpu type to Object*
pc: pass apic_id to pc_find_cpu_slot() directly so lookup could be done without CPU object
pc: calculate topology only once when possible_cpus is initialised
pc: move pcms->possible_cpus init out of pc_cpus_init()
machine: move possible_cpus to MachineState
hw/pci-host/prep: Do not use hw_error() in realize function
target/ppc/POWER9: Direct all instr and data storage interrupts to the hypv
target/ppc/POWER9: Adapt LPCR handling for POWER9
target/ppc/POWER9: Add ISAv3.00 MMU definition
target/ppc: Fix LPCR DPFD mask define
target-ppc: Add xscvqpudz and xscvqpuwz instructions
target-ppc: Implement round to odd variants of quad FP instructions
softfloat: Add float128_to_uint32_round_to_zero()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All callbacks FOO_query_hotpluggable_cpus() are practically
the same except of setting vcpus_count to different values.
Convert them to a generic machine_query_hotpluggable_cpus()
callback by moving vcpus_count initialization to per machine
specific callback possible_cpu_arch_ids().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce support for loading Flattened Image Trees, as used by modern
U-Boot. FIT images are essentially flattened device tree files which
contain binary images such as kernels, FDTs or ramdisks along with one
or more configuration nodes describing boot configurations.
The MIPS Boston board typically boots kernels in the form of FIT images,
and will make use of this code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[yongbok.kim@imgtec.com:
fixed potential memory leaks,
isolated building option]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Check qdev's call to vmstate_register_with_alias_id; that gets
most of the common uses; there's hundreds of calls via vmstate_register
which could get fixed over time.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-4-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I'll be adding an error to it in a subsequent patch.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-2-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Pick a uniform chardev type name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sometimes it is useful to have just a machine with CPU and RAM, without
any further hardware in it, e.g. if you just want to do some instruction
debugging for TCG with a remote GDB attached to QEMU, or run some embedded
code with the "-semihosting" QEMU parameter. qemu-system-m68k already
features a "dummy" machine, and xtensa a "sim" machine for exactly this
purpose.
All target architectures have nowadays also a "none" machine, which would
be a perfect match for this, too - but it currently does not allow to add
CPU and RAM yet. Thus let's add these possibilities in a generic way to the
"none" machine, too, so that we hopefully do not need additional "dummy"
machines in the future anymore (and maybe can also get rid of the already
existing "dummy"/"sim" machines one day).
Note that the default behaviour of the "none" machine is not changed, i.e.
no CPU and no RAM is instantiated by default. You have explicitely got to
specify the CPU model with "-cpu" and the amount of RAM with "-m" to get
these new features.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1484743490-24721-1-git-send-email-thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Useful to send guest data back to QEMU.
Changes from Laszlo Ersek <lersek@redhat.com>:
- rebase the patch from Michael Tsirkin's original postings at [1] and [2]
to the following patches:
- loader: Allow a custom AddressSpace when loading ROMs
- loader: Add AddressSpace loading support to uImages
- loader: fix handling of custom address spaces when adding ROM blobs
- reject such writes immediately that would exceed the end of the array,
rather than performing a partial write before setting the error bit: see
the (len != dma.length) condition
- document the write interface
[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-02/msg04968.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg02735.html
Cc: "Gabriel L. Somlo" <somlo@cmu.edu>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
They are small, it is not worth stubbing them. Just include them
in user-mode emulators and unit tests as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to ISO C99 / N1256 (referenced in HACKING):
> 6.5.8 Relational operators
>
> 4 For the purposes of these operators, a pointer to an object that is
> not an element of an array behaves the same as a pointer to the first
> element of an array of length one with the type of the object as its
> element type.
>
> 5 When two pointers are compared, the result depends on the relative
> locations in the address space of the objects pointed to. If two
> pointers to object or incomplete types both point to the same object,
> or both point one past the last element of the same array object, they
> compare equal. If the objects pointed to are members of the same
> aggregate object, pointers to structure members declared later compare
> greater than pointers to members declared earlier in the structure,
> and pointers to array elements with larger subscript values compare
> greater than pointers to elements of the same array with lower
> subscript values. All pointers to members of the same union object
> compare equal. If the expression /P/ points to an element of an array
> object and the expression /Q/ points to the last element of the same
> array object, the pointer expression /Q+1/ compares greater than /P/.
> In all other cases, the behavior is undefined.
Our AddressSpace objects are allocated generally individually, and kept in
the "address_spaces" linked list, so we mustn't compare their addresses
with relops.
Convert the pointers subjected to the relop in rom_order_compare() to
"uintptr_t":
> 7.18.1.4 Integer types capable of holding object pointers
>
> 1 [...]
>
> The following type designates an unsigned integer type with the
> property that any valid pointer to void can be converted to this type,
> then converted back to pointer to void, and the result will compare
> equal to the original pointer:
>
> /uintptr_t/
>
> These types are optional.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-devel@nongnu.org
Fixes: 3e76099aac
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Commit 3e76099aac ("loader: Allow a custom AddressSpace when loading
ROMs") introduced the "Rom.as" field:
(1) It modified the utility callers of rom_insert() to take "as" as a
new parameter from *their* callers, and set "rom->as" from that
parameter. The functions covered were rom_add_file() and
rom_add_elf_program().
(2) It also modified rom_insert() itself, to auto-assign
"&address_space_memory", in case the external caller passed -- and
the utility caller forwarded -- as=NULL.
Except, commit 3e76099aac forgot to update the third utility caller of
rom_insert(), under point (1), namely rom_add_blob().
* Later, commit 5e774eb3bd ("loader: Add AddressSpace loading support
to uImages") added the load_uimage_as() function, and the
rom_add_blob_fixed_as() function-like macro, with the necessary changes
elsewhere to propagate the new "as" parameter to rom_add_blob():
load_uimage_as()
load_uboot_image()
rom_add_blob_fixed_as()
rom_add_blob()
At this point, the signature (and workings) of rom_add_blob() had been
broken already, and the rom_add_blob_fixed_as() macro passed its "_as"
parameter to rom_add_blob() as "callback_opaque". Given that the
"fw_callback" parameter itself was set to NULL (correctly), this did no
additional damage (the opaque arg would never be used), but ultimately
it broke the new functionality of load_uimage_as().
* The load_uimage_as() function would be put to use in one of the later
patches, commit e481a1f63c ("generic-loader: Add a generic loader").
* We can fix this only in a unified patch now. Append "AddressSpace *as"
to the signature of rom_add_blob(), and handle the new parameter. Pass
NULL from all current callers, except from rom_add_blob_fixed_as(),
where "_as" has to be bumped to the proper position.
* Note that rom_add_file() rejects the case when both "mr" and "as" are
passed in as non-NULL. The action that this is apparently supposed to
prevent is the
rom->mr = mr;
assignment (that's the only place where the "mr" parameter is used in
rom_add_file()). In rom_add_blob() though, we have no "mr" parameter,
and the actions done on the fw_cfg branch:
if (fw_file_name && fw_cfg) {
if (mc->rom_file_has_mr) {
data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
mr = rom->mr;
} else {
data = rom->data;
}
reflect those that are performed by rom_add_file() too (with mr==NULL):
if (rom->fw_file && fw_cfg) {
if ((!option_rom || mc->option_rom_has_mr) &&
mc->rom_file_has_mr) {
data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
} else {
data = rom->data;
}
Hence we need no additional restrictions in rom_add_blob().
* Stable is not affected as both problematic commits appeared first in
v2.8.0-rc0.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: qemu-arm@nongnu.org
Cc: qemu-devel@nongnu.org
Fixes: 3e76099aac
Fixes: 5e774eb3bd
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes the generic-loader file loading to only set the program
counter if a CPU is specified. This follows what is written in the
documentation and was always part of the original intention.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 537bf4d08be7acf7a89b590cff69e19db7f0a6cd.1478908712.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Lots of fixes all over the place.
Unfortunately, this does not yet fix a regression with vhost
introduced by the last pull, the issue is typically this error:
kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
followed by QEMU aborting.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYKyfxAAoJECgfDbjSjVRpI4oH/2ZBpUxT/neq4ezX0bou5+1R
lQ1m0VI1JDbay5uYw0Z0rUY7aLP0kX2XLu2jNBZg7fGz3+BPhqAoEjkGdlUran79
fEnuYCvMMokQNzvMaHv+lFXO/MuEJthdDeUJyi4B0NU0sseutiz8opXuSWIC8Ncx
pyqRb8AfgKnsUSRizEVfiOWI1fk+zsTFbSyUwajwKi5E7RNEuHwLiqk5VFhzrrTX
nLwnUvlH7NrcDfliam9ziadhguo5cwCE4jBlMpeHnW5tGalNRulvF5EgwXybIdrU
JaR6lzQabOcoaAuJJ/dgo336B1Ef3JA/hogqfTW4unJGL5VVkWT0HLZ9OV42NEg=
=ibZy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, pc, pci: documentation, fixes and cleanups
Lots of fixes all over the place.
Unfortunately, this does not yet fix a regression with vhost
introduced by the last pull, the issue is typically this error:
kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
followed by QEMU aborting.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (28 commits)
docs: add PCIe devices placement guidelines
virtio: drop virtio_queue_get_ring_{size,addr}()
vhost: drop legacy vring layout bits
vhost: adapt vhost_verify_ring_mappings() to virtio 1 ring layout
nvdimm acpi: introduce NVDIMM_DSM_MEMORY_SIZE
nvdimm acpi: use aml_name_decl to define named object
nvdimm acpi: rename nvdimm_dsm_reserved_root
nvdimm acpi: fix two comments
nvdimm acpi: define DSM return codes
nvdimm acpi: rename nvdimm_acpi_hotplug
nvdimm acpi: cleanup nvdimm_build_fit
nvdimm acpi: rename nvdimm_plugged_device_list
docs: improve the doc of Read FIT method
nvdimm acpi: clean up nvdimm_build_acpi
pc: memhp: stop handling nvdimm hotplug in pc_dimm_unplug
pc: memhp: move nvdimm hotplug out of memory hotplug
nvdimm acpi: drop the lock of fit buffer
qdev: hotplug: drop HotplugHandler.post_plug callback
vhost: migration blocker only if shared log is used
virtio-net: mark VIRTIO_NET_F_GSO as legacy
...
Message-id: 1479237527-11846-1-git-send-email-mst@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow the PCIHostDeviceAddress structure to work as the host property
in vfio-pci when it has it's default value of all fields set to ~0. In
this form the property indicates a non-existant device but given the
field bit sizes gets asserted as excess (and invalid) precision
overflows the string buffer. The BDF of an invalid device
"FFFF:FF:FF.F" is returned instead.
Signed-off-by: Daniel Oram <daniel.oram@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <71f06765c4ba16dcd71cbf78e877619948f04ed9.1478777270.git.daniel.oram@gmail.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
as nvdimm acpi is okay to build fit when the nvdimm device
has not been 'realized'
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
The buffer is used to save the FIT info for all the presented nvdimm
devices which is updated after the nvdimm device is plugged or
unplugged. In the later patch, it will be used to construct NVDIMM
ACPI _FIT method which reflects the presented nvdimm devices after
nvdimm hotplug
As FIT buffer can not completely mapped into guest address space,
OSPM will exit to QEMU multiple times, however, there is the race
condition - FIT may be changed during these multiple exits, so that
some rules are introduced:
1) the user should hold the @lock to access the buffer and
2) mark @dirty whenever the buffer is updated.
@dirty is cleared for the first time OSPM gets fit buffer, if
dirty is detected in the later access, OSPM will restart the
access
As fit should be updated after nvdimm device is successfully realized
so that a new hotplug callback, post_hotplug, is introduced
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For most of the timers counter starts to decrement after first period
expires. Due to rounding down performed by the ptimer_get_count, it returns
counter - 1 for the running timer, so that for the ptimer user it looks
like counter gets decremented immediately after running the timer. Add "no
counter round down" policy that provides correct behaviour for those timers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: ef39622d0ebfdc32a0877e59ffdf6910dc3db688.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Immediate counter re-load on setting (or on starting to run with)
counter = 0 is a wrong behaviour for some of the timers. Add "no
immediate reload" policy that provides correct behaviour for such timers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: bf9385cd2550ca451d564fa46007688cee3f3d9d.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Performing trigger on setting (or starting to run with) counter = 0 could
be a wrong behaviour for some of the timers, provide "no immediate trigger"
policy to maintain correct behaviour for such timers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 72c0319cf2ec599f22397b7da280c06c34dc40dd.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, periodic timer that has load = delta = 0 performs trigger
on timer reload and stops, printing a "period zero" error message.
Introduce new policy that makes periodic timer to continuously trigger
with a period interval in case of load = 0.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 632b23dd11055d9bd5e338d66b38fac0bd51462e.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, periodic counter wraps around immediately once counter reaches
"0", this is wrong behaviour for some of the timers, resulting in one period
being lost. Add new ptimer policy that provides correct behaviour for such
timers, so that counter stays with "0" for a one period before wrapping
around.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: f22a670cf1f4be298b31640cb5f4be1df0f20ab6.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.
The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store the property in a CharBackend instead of CharDriverState*. This
also replace systematically chr by chr.chr to access the
CharDriverState*. The following patches will replace it with calls to
qemu_chr_fe CharBackend functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When doing the conversion, the NULL errp arguments on the
property registration calls were changed to &error_abort.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a generic loader to QEMU which can be used to load images or set
memory values.
Internally inside QEMU this is a device. It is a strange device that
provides no hardware interface but allows QEMU to monkey patch memory
specified when it is created. To be able to do this it has a reset
callback that does the memory operations.
This device allows the user to monkey patch memory. To be able to do
this it needs a backend to manage the datas, the same as other
memory-related devices. In this case as the backend is so trivial we
have merged it with the frontend instead of creating and maintaining a
seperate backend.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 10f2a9dce5e5e11b6c6d959415b0ad6ee22bcba5.1475195078.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Functions of type FindSysbusDeviceFunc currently return an integer.
However, this return value is always ignored by the caller in
find_sysbus_device().
This changes the function type to return void, to avoid confusion over
the function semantics.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a new function load_image_targphys_as() that allows the caller
to specify an AddressSpace to use when loading a targphys. The
original load_image_targphys() function doesn't have any change in
functionality.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 87de45de7acf02cbe6bae9d6c4d6fb8f3aba4f61.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new function load_uimage_as() that allows the caller to
specify an AddressSpace to use when loading the uImage. The
original load_uimage() function doesn't have any change in
functionality.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1254092e6b80d3cd3cfabafe165d56a96c54c0b5.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new function load_elf_as() that allows the caller to specify an
AddressSpace to use when loading the ELF. The original load_elf()
function doesn't have any change in functionality.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 8b5cefecdf56fba4ccdff2db880f0b6b264cf16f.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When loading ROMs allow the caller to specify an AddressSpace to use for
the load.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 85f86b94ea94879e7ce8b12e85ac8de26658f7eb.1474331683.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prevously the specified MemoryRegion was ignored during the rom register
reset. This patch uses the rom MemoryRegion is avaliable.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: d63fef5524deeb88e0068ca9d3fd4c8344f54dd4.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Under qtest ptimer emits lots of warning messages. The messages are caused
by the actual checking of the ptimer error conditions. Suppress those
messages, so they do not distract.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 44877fff4ff03205590698d3dc189ad6d091472f.1473252818.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some of the timer devices may behave differently from what ptimer
provides. Introduce ptimer policy feature that allows ptimer users to
change default and wrong timer behaviour, for example to continuously
trigger periodic timer when load value is equal to "0".
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 994cd608ec392da6e58f0643800dda595edb9d97.1473252818.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running with counter / period = 0 is treated as a error case, printing error
message claiming that timer has been disabled. However, timer is only marked
as disabled, keeping to tick till expired and triggering after being claimed
as disabled. Stop the QEMU timer to avoid confusion.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 1e9bae4fae3c36430d7c28b0f486a0c71aff7eb3.1473252818.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Simplify a bit the code by using g_strdup_printf() and store it in a
non-const value so casting is no longer needed, and ownership is
clearer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
machine_class_base_init() member name is allocated by
machine_class_base_init(), but not freed by
machine_class_finalize(). Simply freeing there doesn't work,
because DEFINE_PC_MACHINE() overwrites it with a literal string.
Fix DEFINE_PC_MACHINE() not to overwrite it, and add the missing
free to machine_class_finalize().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
If a qdev block device is created with an anonymous BlockBackend (i.e.
a node name rather than a BB name was given for the drive property),
qdev used to return an empty string when the property was read. This
patch fixes it to return the node name instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since 69382d8b (qdev: Fix object reference leak in case device.realize()
fails), object_property_set_bool could release the object. The error
path wants the type name, so hold an reference before realizing it.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1470109301-12966-1-git-send-email-famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch ensures QEMU won't terminate while hotplugging a device if the
global property cannot be set and errp points to error_fatal or error_abort.
While here, it also fixes indentation of the typename argument.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We're not supposed to abort when the user passes a bogus value.
Since the checking is done in visit_type_OnOffSplit(), the call
to abort() is legitimate. Let's add a comment to make it
explicit.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
If device doesn't have parent assined before its realize
is called, device_set_realized() will implicitly set parent
to '/machine/unattached'.
However device_set_realized() may fail after that point at
several other points leaving not realized object dangling
in '/machine/unattached' and as result caller of
obj = object_new()
obj->ref == 1
object_property_set_bool(obj,..., true, "realized",...)
obj->ref == 2
if (fail)
object_unref(obj);
obj->ref == 1
will get object leak instead of expected object destruction.
Fix it by making device_set_realized() to cleanup after itself
in case of failure.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This is a mostly-mechanical conversion that creates a new flat
union 'Netdev' QAPI type that covers all the branches of the
former 'NetClientOptions' simple union, where the branches are
now listed in a new 'NetClientDriver' enum rather than generated
from the simple union. The existence of a flat union has no
change to the command line syntax accepted for new code, and
will make it possible for a future patch to switch the QMP
command to parse a boxed union for no change to valid QMP; but
it does have some ripple effect on the C code when dealing with
the new types.
While making the conversion, note that the 'NetLegacy' type
remains unchanged: it applies only to legacy command line options,
and will not be ported to QMP, so it should remain a wrapper
around a simple union; to avoid confusion, the type named
'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions'
in its place. Then, in the C code, we convert from NetLegacy to
Netdev as soon as possible, so that the bulk of the net stack
only has to deal with one QAPI type, not two. Note that since
the old legacy code always rejected 'hubport', we can just omit
that branch from the new 'NetLegacyOptions' simple union.
Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>:
Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com>
although the sed script in that patch no longer applies due to
other changes in the tree since then, and I also did some manual
cleanups (such as fixing whitespace to keep checkpatch happy).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Fixup from Eric squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Software should see timer counter wraparound only after IRQ being triggered.
This fixes regression introduced by the commit 5a50307 ("hw/ptimer: Perform
counter wrap around if timer already expired"), resulting in monotonic timer
jumping backwards on SPARC emulated machine running NetBSD guest OS, as
reported by Mark Cave-Ayland.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 20160708132206.2080-1-digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The rerror/werror policies are implemented in the devices, so that's
where they should be configured. In comparison to the old options in
-drive, the qdev properties are only added to those devices that
actually support them.
If the option isn't given (or "auto" is specified), the setting of the
BlockBackend is used for compatibility with the old options. For block
jobs, "auto" is the same as "enospc".
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If a node name instead of a BlockBackend name is specified as the driver
for a guest device, an anonymous BlockBackend is created now.
The order of operations in release_drive() must be reversed in order to
avoid a use-after-free bug because now blk_detach_dev() frees the last
reference if an anonymous BlockBackend is used.
usb-storage uses a hack where it forwards its BlockBackend as a property
to another device that it internally creates. This hack must be updated
so that it doesn't drop its original BB before it can be passed to the
other device. This used to work because we always had the monitor
reference around, but with node-names the device reference is the only
one now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Use the new GlobalProperty.errp field to handle compat_props
errors.
Example output before this change:
(with an intentionally broken entry added to PC_COMPAT_1_3 just
for testing)
$ qemu-system-x86_64 -machine pc-1.3
qemu-system-x86_64: hw/core/qdev-properties.c:1091: qdev_prop_set_globals_for_type: Assertion `prop->user_provided' failed.
Aborted (core dumped)
After:
$ qemu-system-x86_64 -machine pc-1.3
Unexpected error in x86_cpuid_set_vendor() at /home/ehabkost/rh/proj/virt/qemu/target-i386/cpu.c:1688:
qemu-system-x86_64: can't apply global cpu.vendor=x: Property '.vendor' doesn't take value 'x'
Aborted (core dumped)
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The new field will allow error handling to be configured by
qdev_prop_register_global() callers: &error_fatal and
&error_abort can be used to make QEMU exit or abort if any errors
are reported when applying the properties.
While doing it, change the error message from "global %s.%s=%s
ignored" to "can't apply global %s.%s=%s".
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The function is just a helper to handle the -global options, it
can stay in vl.c like most qemu_opts_foreach() calls.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
qdev_prop_set_globals_for_type() stops applying global properties
on the first error. It is a leftover from when QEMU exited on any
error when applying global property. Commit 25f8dd9 changed the
fatal error to a warning, but neglected to drop the stopping.
Fix that.
For example, the following command-line will not set CPUID level
to 3, but will warn only about "x86_64-cpu.vendor" being ignored.
$ ./x86_64-softmmu/qemu-system-x86_64 \
-global x86_64-cpu.vendor=x \
-global x86_64-cpu.level=3
qemu-system-x86_64: Warning: global x86_64-cpu.vendor=x ignored: Property '.vendor' doesn't take value 'x'
Fix this by not returning from qdev_prop_set_globals_for_type()
on the first error.
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXe4l4AAoJECgfDbjSjVRpIz4IALye7mKG61/POA4Gqmhalc3d
HnlNSZ2YcKAuvPg7WWkBuRacrQvVY/MbW1mLloG1lY0tdFgZG8Cy+CY6wJg1NE4c
cXd+77vHkIyrnl+Nil+QOgTFiAsMnD+mXHHsnCDw2jGn3JbgVNuCMi7V34fGkQd2
PDkZyYfwTqO3HytuG0/j2Somc9du1gjYdn+9qigfZVgP96jGDojBuJWuuU5flCB3
Kj5xrOuI01XlbdTk71tVjBJBektQurWr6r7GECDqZIpUfc+BI70FU9jPh+OlLTO/
92yi29ncjyStz4tRnf18xoQ8uBgH/tD1xigEUPRtnm1+0i/tgONBL8cAdBF9FBE=
=ABGE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 05 Jul 2016 11:18:32 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (30 commits)
vmw_pvscsi: remove unnecessary internal msi state flag
e1000e: remove unnecessary internal msi state flag
vmxnet3: remove unnecessary internal msi state flag
mptsas: remove unnecessary internal msi state flag
megasas: remove unnecessary megasas_use_msi()
pci: Convert msi_init() to Error and fix callers to check it
pci bridge dev: change msi property type
megasas: change msi/msix property type
mptsas: change msi property type
intel-hda: change msi property type
usb xhci: change msi/msix property type
change pvscsi_init_msi() type to void
tests: add APIC.cphp and DSDT.cphp blobs
tests: acpi: add CPU hotplug testcase
log: Permit -dfilter 0..0xffffffffffffffff
range: Replace internal representation of Range
range: Eliminate direct Range member access
log: Clean up misuse of Range for -dfilter
pci_register_bar: cleanup
Revert "virtio-net: unbreak self announcement and guest offloads after migration"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
BlockBackend has only a single pointer to its guest device, so it makes
sure that only a single guest device is attached to it. device-add
returns an error if you try to attach a second device to a BB. In order
to make the error message nicer, -device that manually connects to a
if=none block device get a different message than -drive that implicitly
creates a guest device. The if=... option is stored in DriveInfo.
However, since blockdev-add exists, not every BlockBackend has a
DriveInfo any more. Check that it exists before we dereference it.
QMP reproducer resulting in a segfault:
{"execute":"blockdev-add","arguments":{"options":{"id":"disk","driver":"file","filename":"/tmp/test.img"}}}
{"execute":"device_add","arguments":{"driver":"virtio-blk-pci","drive":"disk"}}
{"execute":"device_add","arguments":{"driver":"virtio-blk-pci","drive":"disk"}}
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a helper that will scan a static RegisterAccessInfo Array
and populate a container MemoryRegion with registers as defined.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 347b810b2799e413c98d5bbeca97bcb1557946c3.1467053537.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QOMify registers as a child of TYPE_DEVICE. This allows registers to
define GPIOs.
Define an init helper that will do QOM initialisation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 2545f71db26bf5586ca0c08a3e3cf1b217450552.1467053537.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add memory io handlers that glue the register API to the memory API.
Just translation functions at this stage. Although it does allow for
devices to be created without all-in-one mmio r/w handlers.
This patch also adds the RegisterInfoArray struct, which allows all of
the individual RegisterInfo structs to be grouped into a single memory
region.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: f7704d8ac6ac0f469ed35401f8151a38bd01468b.1467053537.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This API provides some encapsulation of registers and factors out some
common functionality to common code. Bits of device state (usually MMIO
registers) often have all sorts of access restrictions and semantics
associated with them. This API allows you to define what those
restrictions are on a bit-by-bit basis.
Helper functions are then used to access the register which observe the
semantics defined by the RegisterAccessInfo struct.
Some features:
Bits can be marked as read_only (ro field)
Bits can be marked as write-1-clear (w1c field)
Bits can be marked as reserved (rsvd field)
Reset values can be defined (reset)
Bits can be marked clear on read (cor)
Pre and post action callbacks can be added to read and write ops
Verbose debugging info can be enabled/disabled
Useful for defining device register spaces in a data driven way. Cuts
down on a lot of the verbosity and repetition in the switch-case blocks
in the standard foo_mmio_read/write functions.
Also useful for automated generation of device models from hardware
design sources.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 40d62c7e1bf6e63bb4193ec46b15092a7d981e59.1467053537.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since iommu devices can be created with '-device' there is
no need to keep iommu as machine and mch property.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the same GlobalProperty struct is registered twice, the list
entry gets corrupted, making tqe_next points to itself, and
qdev_prop_set_globals() gets stuck in a loop. The bug can be
easily reproduced by running:
$ qemu-system-x86_64 -rtc-td-hack -rtc-td-hack
Change global_props to use GList instead of queue.h, making the
code simpler and able to deal with properties being registered
twice.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
pre_plug callback is to be called before device.realize() is executed.
This would allow to check/set device's properties from HotplugHandler.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If qdev_try_create() is passed NULL for the bus, it will automatically
put the newly created device onto the default system bus. However
if the device is not actually a SysBusDevice then this will result
in later crashes (for instance when running the monitor "info qtree"
command) because code reasonably assumes that all devices on the system
bus are system bus devices.
Generally the mistake is that the calling code should create the
object with object_new(TYPE_FOO) rather than qdev_create(NULL, TYPE_FOO);
see commit 6749695eaa for an example of fixing this bug.
Assert in qdev_try_create() if the device isn't suitable to put on
the system bus, so that this mistake results in failure earlier
and more reliably.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
include:
1. remove unnecessary declaration of static function
2. fix inconsistency between comment and function name, and typo OOM->QOM
2. update comments of functions, use uniform format(GTK-Doc style)
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently ptimer users are used to store copy of the limit value, because
ptimer doesn't provide facility to retrieve the limit. Let's provide it.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 8f1fa9f90d8dbf8086fb02f3b4835eaeb4089cf6.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow switching between periodic <-> oneshot modes while timer is running.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: f030be6e28fbd219e1e8d22297aee367bd9af5bb.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Delta value must be updated on period/freq change, otherwise running timer
would be restarted (counter reloaded with old delta). Only m68k/mcf520x
and arm/arm_timer devices are currently doing freq change correctly, i.e.
stopping the timer. Perform delta update to fix affected devices and
eliminate potential further mistakes.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 4987ef5fdc128bb9a744fd794d3f609135c6a39c.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ptimer_get_count() might be called while QEMU timer already been expired.
In that case ptimer would return counter = 0, which might be undesirable
in case of polled timer. Do counter wrap around for periodic timer to keep
it distributed. In order to achieve more accurate emulation behaviour of
certain hardware, don't perform wrap around when in icount mode and return
counter = 0 in that case (that doesn't affect polled counter distribution).
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 4ce381c7d24d85d165ff251d2875d16a4b6a5c04.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Multiple issues here related to the timer with a adjusted .limit value:
1) ptimer_get_count() returns incorrect counter value for the disabled
timer after loading the counter with a small value, because adjusted limit
value is used instead of the original.
For instance:
1) ptimer_stop(t)
2) ptimer_set_period(t, 1)
3) ptimer_set_limit(t, 0, 1)
4) ptimer_get_count(t) <-- would return 10000 instead of 0
2) ptimer_get_count() might return incorrect value for the timer running
with a adjusted limit value.
For instance:
1) ptimer_stop(t)
2) ptimer_set_period(t, 1)
3) ptimer_set_limit(t, 10, 1)
4) ptimer_run(t)
5) ptimer_get_count(t) <-- might return value > 10
3) Neither ptimer_set_period() nor ptimer_set_freq() are adjusting the
limit value, so it is still possible to make timer timeout value
arbitrary small.
For instance:
1) ptimer_set_period(t, 10000)
2) ptimer_set_limit(t, 1, 0)
3) ptimer_set_period(t, 1) <-- bypass limit correction
Fix all of the above issues by adjusting timer period instead of the limit.
Perform the adjustment for periodic timer only. Use the delta value instead
of the limit to make decision whether adjustment is required, as limit could
be altered while timer is running, resulting in incorrect value returned by
ptimer_get_count.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: cd141f74f5737480ec586b9c7d18cce1d69884e2.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move bus type and related APIs to a separate file bus.c.
This is a first step in breaking up qdev.c into more manageable chunks.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[AF: Rebased onto osdep.h]
Signed-off-by: Andreas Färber <afaerber@suse.de>
[PMM: added bus.o to link line for test-qdev-global-props]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
nmi_monitor_handle is wired to call the x86 nmi
handler. So, we can directly use it at call sites.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-Id: <1463761717-26558-3-git-send-email-bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switch to adding compat properties incrementaly instead of
completly overwriting compat_props per machine type.
That removes data duplication which we have due to nested
[PC|SPAPR]_COMPAT_* macros.
It also allows to set default device properties from
default foo_machine_options() hook, which will be used
in following patch for putting VMGENID device as
a function if ISA bridge on pc/q35 machines.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Fixed CCW_COMPAT_* and PC_COMPAT_0_* defines]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
All DisplayType values are just UI options that don't affect any
hardware emulation code, except for DT_NOGRAPHIC. Replace
DT_NOGRAPHIC with DT_NONE plus a new "-machine graphics=on|off"
option, so hardware emulation code don't need to use the
display_type variable.
Cc: Michael Walle <michael@walle.cc>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
pio_addr_t is almost unused, because these days I/O ports are simply
accessed through the address space. cpu_{in,out}[bwl] themselves are
almost unused; monitor.c and xen-hvm.c could use address_space_read/write
directly, since they have an integer size at hand. This leaves qtest as
the only user of those functions.
On the other hand even portio_* functions use this type; the only
interesting use of pio_addr_t thus is include/hw/sysbus.h. I guess I
could move it there, but I don't see much benefit in that either. Using
uint32_t is enough and avoids the need to include ioport.h everywhere.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Entries are inserted in filename order instead of being
appended to the end in case sorting is enabled.
This will avoid any future issues of moving the file creation
around, it doesn't matter what order they are created now,
the will always be in filename order.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Added machine type handling for compatibility. This was
a fairly complex change, this will preserve the order of fw_cfg
for older versions no matter what order the firmware files
actually come in. A list is kept of the correct legacy order
and the entries will be inserted based upon their order in
the list. Except that some entries are ordered (in a specific
area of the list) based upon what order they appear on the
command line. Special handling is added for those entries.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-common.h should only be included by .c files. Its file comment
explains why: "No header file should depend on qemu-common.h, as this
would easily lead to circular header dependencies."
hw/pci/pci.h includes qemu-common.h, but its users only need pcibus_t
and PCIHostDeviceAddress from it. Move them to hw/pci/pci.h and drop
the ill-advised include. Include hw/pci/pci.h where the moved stuff
is now missing. Except we can't in target-i386/kvm_i386.h, because
that would break the i386-linux-user compile. Add
PCIHostDeviceAddress to qemu/typedefs.h instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some CPUs are of an opposite data-endianness to other components in the
system. Sometimes elfs have the data sections layed out with this CPU
data-endianness accounting for when loaded via the CPU, so byte swaps
(relative to other system components) will occur.
The leading example, is ARM's BE32 mode, which is is basically LE with
address manipulation on half-word and byte accesses to access the
hw/byte reversed address. This means that word data is invariant
across LE and BE32. This also means that instructions are still LE.
The expectation is that the elf will be loaded via the CPU in this
endianness scheme, which means the data in the elf is reversed at
compile time.
As QEMU loads via the system memory directly, rather than the CPU, we
need a mechanism to reverse elf data endianness to implement this
possibility.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an API to load an elf header header from a file. Populates a
buffer with the header contents, as well as a boolean for whether the
elf is 64b or not. Both arguments are optional.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Fix typo in comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new function load_image_mr(), which behaves like
load_image_targphys() except that it loads the ROM image to
a specified MemoryRegion rather than to a specified physical
address. This is useful when a ROM blob needs to be loaded
to a particular flash or ROM device but the address of that
device in the machine's address space is not known. (For
instance, ROMs in devices, or ROMs which might exist in
a different address space to the system address space.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455288361-30117-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Migration of pseries-2.3 doesn't have configuration section. Unfortunately,
QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration
section, and break migration both ways.
This patch introduces a property which allows to enforce a configuration
section for machines who don't have one.
It can be set at startup:
-machine enforce-config-section=on
or later from the QEMU monitor:
qom-set /machine enforce-config-section on
It is up to the tooling to set or unset this property according to the
version of the QEMU at the other end of the pipe.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
visit_start_struct() and visit_type_enum() had a 'kind' argument
that was usually set to either the stringized version of the
corresponding qapi type name, or to NULL (although some clients
didn't even get that right). But nothing ever used the argument.
It's even hard to argue that it would be useful in a debugger,
as a stack backtrace also tells which type is being visited.
Therefore, drop the 'kind' argument as dead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-22-git-send-email-eblake@redhat.com>
[Harmless rebase mistake cleaned up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.
Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).
@ rule1 @
identifier fn;
typedef Object, Visitor, Error;
identifier obj, v, opaque, name, errp;
@@
void fn
- (Object *obj, Visitor *v, void *opaque, const char *name,
+ (Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp) { ... }
@@
identifier rule1.fn;
expression obj, v, opaque, name, errp;
@@
fn(obj, v,
- opaque, name,
+ name, opaque,
errp)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-37-git-send-email-peter.maydell@linaro.org
Currently, QEMU chooses a drive type automatically based on the inserted
media. If there is no disk inserted, it chooses a 1.44MB drive type.
Change this behavior to be configurable, but leave it defaulted to 1.44.
This is not earnestly intended to be used by a user or a management
library, but rather exists so that pre-2.6 board types can configure it
to be a legacy value.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1453495865-9649-8-git-send-email-jsnow@redhat.com
qbus_realize() adds busses as a QOM child of the device in addition to
adding it to the qdev bus list. Change get_child_bus() to use the QOM
child if it is available. This takes priority over the bus-list, but
the child object is checked for type correctness.
This prepares support for aliasing of buses. The use case is SoCs,
where a SoC container needs to present buses to the board level, but
the buses are implemented by controller IP we already model as self
contained qbus-containing devices.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Otherwise there is a race where the DEVICE_DELETED event has been sent but
attempts to reuse the ID will fail.
Note that similar races exist for other QemuOpts, which this patch
does not attempt to fix.
For example, if the device is a block device, then unplugging it also
deletes its backend. However, this backend's get deleted in
drive_info_del(), which is only called when properties are
destroyed. Just like device_finalize(), drive_info_del() is called
some time after DEVICE_DELETED is sent. A separate patch series has
been sent to plug this other bug. Character devices also have yet to
be fixed.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-25-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Done with this Coccinelle semantic patch
@@
expression FMT, E, S;
expression list ARGS;
@@
- error_report(FMT, ARGS, error_get_pretty(E));
+ error_reportf_err(E, FMT/*@@@*/, ARGS);
(
- error_free(E);
|
exit(S);
|
abort();
)
followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.
We now use the error whole instead of just its message obtained with
error_get_pretty(). This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Prepend the additional information, colon, space to the original
message without enclosing it in parenthesis or quotes, like we do
elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-11-git-send-email-armbru@redhat.com>
platform_bus_map_irq() and platform_bus_map_mmio() use hw_error() to
fail. They run in machine_init_done_notifiers, via
platform_bus_init_notify() and link_sysbus_device(). Printing CPU
registers is not helpful there.
Replace hw_error() by error_report(); exit(1). If these are
programming errors, it should be replaced by an assertion instead.
While there, observe that both functions always return 0, and
link_sysbus_device() ignores the return value. Change them to void.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-9-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1449764955-10741-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Done with this Coccinelle semantic patch:
@@
type T;
identifier FUN, RET;
expression list ARGS;
expression ERR, EC;
@@
(
- T RET = FUN(ARGS, &ERR);
+ T RET = FUN(ARGS, &error_fatal);
|
- RET = FUN(ARGS, &ERR);
+ RET = FUN(ARGS, &error_fatal);
|
- FUN(ARGS, &ERR);
+ FUN(ARGS, &error_fatal);
)
- if (ERR != NULL) {
- error_report_err(ERR);
- exit(EC);
- }
This is actually a more elegant version of my initial semantic patch
by courtesy of Eduardo.
It leaves dead Error * variables behind, cleaned up manually.
Cc: qemu-arm@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
The "return;" statement at the end of device_set_realized()
does not make much sense, so let's remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This way, these settings can be simply set on the corresponding
machine_options() function, instead of requiring code in
pc_compat_*() functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This patch adds the initial plumbing for split IRQ chip mode via
KVM_CAP_SPLIT_IRQCHIP. In addition to option processing, a number of
kvm_*_in_kernel macros are defined to help clarify which component is
where.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The helper function machine_iommu() isn't necesary. We can
directly check for the property.
Signed-off-by: Bandan Das <bsd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
For TYPE_DEVICE, the dc->reset() function is not called on system resets
yet. Until that is changed, we have to manually register a reset handler.
Let's provide qdev_reset_all_fn(), that can directly be used - just like
the reset handler that is already available for qbus.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch adds deterministic replay for hardware periodic countdown timers.
ptimer uses bottom halves layer to execute such an asynchronous callback.
We put this callback into the replay queue instead of bottom halves one.
When checkpoint is met by main loop thread, the replay queue is processed
and callback is executed. Binding callback moment to one of the checkpoints
makes it deterministic.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162456.8676.83366.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Convert all machines to use DEFINE_MACHINE() instead of QEMUMachine
automatically using a script.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Style cleanups, convert imx25_pdk machine]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now all TYPE_MACHINE subclasses use MACHINE_TYPE_NAME to generate the
class name. So instead of requiring each subclass to set
MachineClass::name manually, we can now set it automatically at the
TYPE_MACHINE class_base_init() function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
[AF/ehabkost: Updated for s390-ccw machines]
[AF: Cleanup of intermediate virt and vexpress name handling]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now that all non-abstract TYPE_MACHINE subclasses have the -machine
suffix, add an assert to ensure this will be always true.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Expansion of [*] suffix is very slow because index expansion is done using
trial and error strategy, starting every time from zero and retrying with
the next index until insertion succeeds. With large number of already added
properties this process takes huge amount of time (O(n^2) complexity).
Some architectures (like ARM) use very large amount of IRQ pins in interrupt
controller models. This flaw makes machine startup extremely slow
(~20 seconds for ARM64 with 32 CPUs). This patch decreases this time down to
~10 seconds.
Also in qdev_init_gpio_out_named() memset() is now called only once for the
whole array instead of per-cell cleaning
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit ef701d7 screwed up handling of out-of-memory conditions.
Before the commit, we report the error and exit(1), in one place. The
commit lifts the error handling up the call chain some, to three
places. Fine. Except it uses &error_abort in these places, changing
the behavior from exit(1) to abort(), and thus undoing the work of
commit 3922825 "exec: Don't abort when we can't allocate guest
memory".
The previous commit fixed up uses of memory_region_init_ram(). One of
them was replaced by memory_region_init_resizeable_ram() [sic!] in
commit a166614, so Coccinelle missed it. Fix it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-4-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
pc and virtio changes, bugfixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVo6kaAAoJECgfDbjSjVRpEvcH/jiNHGHD+AzFSJ6+vcKH8MHY
GVyWxvnFimyusnv74c7nwTsRGjRycKCPFy8GN/ZX+VWpIpPwK9mysBQ97zM45xeM
T+w1eT4zXafZESr6coAaUu6AvPnVPmsx2im6j5LxBnyIzj41D7dydOM0dU/OHOSI
gUS2DlhqqRPqkB2LscIrkkCmiWpizxTACzZzrko+AuTZ6YVTOEWcnRps9gqR+MWF
o24uppNPIkkmKoWBbXEiTfTqy7rcWydCb/BiM0UMo2cTOeXESNiaQNbKL2ED8K5d
187sL9XCkBrImh4NOFMy4ZKsJ7Uy9zg+zpk03XbjMF+7S155Fcacp2ahDtuCoDA=
=DITH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio: fixes for 2.4
pc and virtio changes, bugfixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon Jul 13 13:03:38 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pc: fix reuse of pc-i440fx-2.4 in pc-i440fx-2.3
Revert "virtio-net: enable virtio 1.0"
virtio-pci: don't crash on illegal length
qdev: fix 64 bit properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
64 bit props used 32 bit callbacks in two places, leading to broken
feature bits on virtio (example: got 0x31000000000006d4 which is
obviously bogus). Fix this.
Fixes: fdba6d96 ("qdev: add 64bit properties")
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVnQWdAAoJEL/70l94x66D6OgIAKJlzQfmy5w7Q9WD4vCMhD76
JrpLSsn7Gx/Bws0Nu9nLQlqun5z4hiUxyG2kP/WqD9+tV3cpSMSyrG6ImVdqKnQ5
+Z8WJZuREkQv0aqDUjQVST+eIDZuh2LWJXAjhgsCXUHY77eWb/7WmKT79xJOa+5C
5xB1qxudqX5IsTvpiKKPbmUGYkAcvRX1dUSaFwRIMO0UyKn59B9WfM9a5slIbLW7
XfI8+wEJshTVLuQkkTfdidWQc5M5DwlmO7ESUNR/BRPCPFeyjcDqgQY5pBM5XVo9
C+S0R3zIt3Ew0fhCtLRyjlIT0bGfwjbU5HRiHcyldBKhNUZZjSUoOWJnYRHXUDY=
=H8wA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Bugfixes and Daniel Berrange's crypto library.
# gpg: Signature made Wed Jul 8 12:12:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
ossaudio: fix memory leak
ui: convert VNC to use generic cipher API
block: convert qcow/qcow2 to use generic cipher API
ui: convert VNC websockets to use crypto APIs
block: convert quorum blockdrv to use crypto APIs
crypto: add a nettle cipher implementation
crypto: add a gcrypt cipher implementation
crypto: introduce generic cipher API & built-in implementation
crypto: move built-in D3DES implementation into crypto/
crypto: move built-in AES implementation into crypto/
crypto: introduce new module for computing hash digests
vl: move rom_load_all after machine init done
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On ARM, commit ac9d32e396 postponed the
memory preparation for boot until the machine init done notifier. This
has for consequence to insert ROM at machine init done time.
However the rom_load_all function stayed called before the ROM are
inserted. As a consequence the rom_load_all function does not do
everything it is expected to do, on ARM.
It currently registers the ROM reset notifier but does not iterate through
the registered ROM list. the isrom field is not set properly. This latter
is used to report info in the monitor and also to decide whether the
rom->data can be freed on ROM reset notifier.
To fix that regression the patch moves the rom_load_all call after
machine init done. We also take the opportunity to rename the rom_load_all
function into rom_check_and_resgister_reset() and integrate the
rom_load_done in it.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reported-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1434470874-22573-1-git-send-email-eric.auger@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new connect_irq_notifier notifier in the SysBusDeviceClass. This
notifier, if populated, is called after sysbus_connect_irq.
This mechanism is used to setup VFIO signaling once VFIO platform
devices get attached to their platform bus, on a machine init done
notifier.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVjVb/AAoJECgfDbjSjVRpeaEH/2bwK7BGgczEQ7fhzIEaQSQq
SV7aychNZvUFASXLV6aVmQCdYixZxlI9KDn0pMRYntUcjxRRB48U3N5Sy4km46Pw
LLN3vxGzHazlE7AJ5c+WVDf0e2k7v3CpZ/TKXzPHmvZXIuBfjKXtKzBgyQYxGkmL
JgRrRSHDrsbvfmhI4uHMpCTYs/WeY1cuA1IzvimBjmvVP5kkko4NoX+HEWmGJ6WK
13fQuV+Cvz7Yk40HRpPAM0QPV2etGCj+dU7xgF9BWnn9mzbGC5iy8EUClyGil/af
k3i/bCxs6IgpQ76LaezJtGPtn1jbohrO4qRqlatUAJCwgCYMCkxkIk+Pr4A3x4c=
=6WvB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci fixes, enhancements
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri Jun 26 14:43:27 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
Fix glib_subprocess test
hw/pci-bridge: format special OFW unit address for PXB host
hw/core: explicit OFW unit address callback for SysBusDeviceClass
hw/pci-bridge: disable SHPC in PXB
hw/pci-bridge: introduce "shpc" property
hw/pci: introduce shpc_present() helper function
hw/pci-bridge: add macro for "msi" property
hw/pci-bridge: add macro for "chassis_nr" property
hw/pci-bridge: expose _test parameter in SHPC_VMSTATE()
migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST()
add pci-bridge-seat
pc: cleanup and convert TMP ACPI device description to AML API
MAINTAINERS: add ACPI entry
vhost: correctly pass error to caller in vhost_dev_enable_notifiers()
balloon: add a feature bit to let Guest OS deflate balloon on oom
qdev: fix OVERFLOW_BEFORE_WIDEN
virito-pci: fix OVERRUN problem
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the user forgot if=none on their drive specification they're likely
to get an error message because the drive is assigned once automatically
by QEMU and once by the manual id=/drive= user command line specification.
Improve the error message produced in this case to explicitly guide the
user towards if=none.
We rephrase the "drive conflict but not for an if=something" error as
well to keep the wording in line.
The two cases that change are:
(1) Drive specified as to be auto-connected and also manually connected
(and the board does handle this if= type):
qemu-system-x86_64 -nodefaults -display none \
-drive if=scsi,file=tmp.qcow2,id=foo -device ide-hd,drive=foo
Previously:
qemu-system-x86_64: -device ide-hd,drive=foo: Property 'ide-hd.drive'
can't take value 'foo', it's in use
Now:
qemu-system-x86_64: -device ide-hd,drive=foo: Drive 'foo' is already in
use because it has been automatically connected to another device (did
you need 'if=none' in the drive options?)
(2) Drive specified to be manually connected in two different ways:
qemu-system-x86_64 -nodefaults -display none \
-drive if=none,file=tmp.qcow2,id=foo -device ide-hd,drive=foo \
-device ide-hd,drive=foo
Previously:
qemu-system-x86_64: -device ide-hd,drive=foo: Property 'ide-hd.drive'
can't take value 'foo', it's in use
Now:
qemu-system-x86_64: -device ide-hd,drive=foo: Drive 'foo' is already in
use by another device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435068107-12594-3-git-send-email-peter.maydell@linaro.org
Instead of having set_pointer() call a parse callback which returns
an error number that we then convert to an Error string with
error_set_from_qdev_prop_error(), make the parse callback take an
Error** and set the error itself. This will allow parse routines
to provide more helpful error messages than the generic ones.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435068107-12594-2-git-send-email-peter.maydell@linaro.org
The sysbus_get_fw_dev_path() function formats OpenFirmware device path
nodes ("driver-name@unit-address") for sysbus devices. The first choice
for "unit-address" is the base address of the device's first MMIO region.
The second choice is its first IO port.
However, if two sysbus devices with the same "driver-name" lack both MMIO
and PIO resources, then there is no good way to distinguish them based on
their OFW nodes, because in this case unit-address is omitted completely
for both devices. An example is TYPE_PXB_HOST ("pxb-host").
For the sake of such devices, introduce the explicit_ofw_unit_address()
"virtual member function". With this function, each sysbus device in the
same SysBusDeviceClass can state its own address.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Potentially overflowing expression "1 << prop->bitnr" with
type "int" (32 bits, signed) is evaluated using 32-bit arithmetic,
and then used in a context that expects an expression of type
"uint64_t" (64 bits, unsigned).
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* Changes to name string ownership for alias properties
* Improvements around enum properties
* Cleanups around -object handling
* New helper functions
* Cleanups of qdev init helper functions
* Add path argument to qom-tree script
* QTest cleanup to use new qtest_add_data_func() consistently
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bIg2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* Changes to name string ownership for alias properties
* Improvements around enum properties
* Cleanups around -object handling
* New helper functions
* Cleanups of qdev init helper functions
* Add path argument to qom-tree script
* QTest cleanup to use new qtest_add_data_func() consistently
# gpg: Signature made Fri Jun 19 18:14:38 2015 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
qdev: Un-deprecate qdev_init_nofail()
qdev: Deprecated qdev_init() is finally unused, drop
qom: Don't pass string table to object_get_enum() function
qom: Add an object_property_add_enum() helper function
qom: Make enum string tables const-correct
qom: Add object_new_with_props() / object_new_withpropv() helpers
qom: Add helper function for getting user objects root
vl: Create (most) objects before creating chardev backends
doc: Document user creatable object types in help text
backends: Fix typename of 'policy' enum property in hostmem obj
scripts: Add support for path as argument of qom-tree
tests: Use qtest_add_data_func() consistently
qdev: Free property names after registering gpio aliases
qom: strdup() target property name on object_property_add_alias()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qdev_init() is a wrapper around setting property "realized" to true,
plus error handling that passes errors to qerror_report_err().
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
All code has been modernized to avoid qdev_init() and its
inappropriate error handling. We can finally drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Most notably this includes virtio cross-endian patches.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVg+xdAAoJECgfDbjSjVRp6AAH/3ILznMtvJZjQ/WOjLEsL13M
+0cYEM1LI6LbLhqeruQVVcY9/hx61yHxZMoLkVg/I2po7F4HDNI2vo5Y7eGx+xN0
5rlcAw9/ZQ6SkCVmjN/VZfISW5mSqCaKH8gNzu8AigjsryJSj5iDXv1YJimwsF+5
cgCerhLIVvEkXmNj1ChwR+fz1IgFzJ8TRaZ0N2glxLyVjgKS57diqZF3Rbg2DdQl
BPbekbbtxesPgmKRvtarbhjx26TlnP1YShjhWA5r72gBNlqblLDycpaIGXr34b3a
sLIZjxzQtTEGcaGtkifMgazyK3rY3JmzOshD0onFOWY1r6Abxuj7eTZOEE6JQXk=
=tju/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci fixes, enhancements
Most notably this includes virtio cross-endian patches.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost: enable vhost without without MSI-X
pci: Don't register a specialized 'config_write' if default behavior is intended
hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf()
vhost_net: re-enable when cross endian
vhost-net: tell tap backend about the vnet endianness
tap: fix non-linux build
tap: add VNET_LE/VNET_BE operations
vhost: set vring endianness for legacy virtio
virtio: introduce virtio_legacy_is_cross_endian()
linux-headers: sync vhost.h
vhost-user: part of virtio
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is done mainly for improving readability, and in preparation for the
next patch, but Markus pointed out another bonus for the string being
returned:
"No arbitrary length limit. Before the patch, it's 39 characters, and the
code breaks catastrophically when qdev_fw_name() is longer: the second
snprintf() is called with its first argument pointing beyond path[], and
its second argument underflowing to a huge size."
Cc: qemu-stable@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that object_property_add_alias() strdup()s target_name, we can free
the property names in qdev_pass_gpios().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Let's introduce a general "inject_nmi()" function that doesn't rely on the cpu
index of the monitor, but uses cpu index 0 as default (except for x86).
This function can then later be used from a non-monitor context.
Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
CC: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
When the argument is non-zero, qemu_opts_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the bit-wise
inclusive or of all the return values. Funky :)
The callers that pass zero could just as well pass one, because their
callbacks can't return anything but zero:
* qemu_add_globals()'s callback qdev_add_one_global()
* qemu_config_write()'s callback config_write_opts()
* main()'s callbacks default_driver_check(), drive_enable_snapshot(),
vnc_init_func()
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Machines types can have different requirement for default ram
size. Introduce a member in the machine class and set the current
default_ram_size to 128MB.
For QEMUMachine types override the value during the registration of
the machine and for MachineClass introduce the generic class init
setting the default_ram_size.
Add helpers [K,M,G,T,P,E]_BYTE for better readability and easy usage
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Needed for virtio features which go from 32bit to 64bit with virtio 1.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVUFj/AAoJECgfDbjSjVRpteQH+gKoOMKilM6qvgdQS9vduFJ+
lDHNnmfgzWjVMEetiUOc9hImfEEyTyDFrkSI3wf4a8RZ7UnnDKD8hZR1nToySJPd
SuDP/EdtXYtInIMjc1MUUrJEP6qtjjgM+IbikVzHDxCeekrTMFz2w05MZ+V+hxI5
8b8ndPNfjX3ciIRjHKZ2u6hKEemhzxr1yyKTnJVGDN07hmfMbCyLsiWnFfShZwfv
g7USgiXjFfpvU5Q7QWpiCapfAaEpevRqieGzRjSbPy5Frm3XT7v+hWbFnvIJqUPj
5/SMV8I4qtKQe15Qah292HB//oaFM/AvRtHWvQkre3YIqFwyCYimQtjqoRCYC1E=
=x0ub
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio enhancements
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon May 11 08:23:43 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
acpi: update expected files for memory unplug
virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi
virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net
pci: Merge pci_nic_init() into pci_nic_init_nofail()
acpi: add a missing backslash to the \_SB scope.
qmp-event: add event notification for memory hot unplug error
acpi: add hardware implementation for memory hot unplug
acpi: fix "Memory device control fields" register
acpi: extend aml_field() to support UpdateRule
acpi, mem-hotplug: add unplug cb for memory device
acpi, mem-hotplug: add unplug request cb for memory device
acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus
docs: update documentation for memory hot unplug
virtio: coding style tweak
pci: remove hard-coded bar size in msix_init_exclusive_bar()
virtio-pci: speedup MSI-X masking and unmasking
virtio: introduce vector to virtqueues mapping
virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue
monitor: check return value of qemu_find_net_clients_except()
monitor: replace the magic number 255 with MAX_QUEUE_NUM
...
Conflicts:
hw/s390x/s390-virtio-bus.c
[PMM: fixed conflict in s390_virtio_scsi_properties and
s390_virtio_net_properties arrays; since the result of the
two conflicting patches is to empty the property arrays
completely, the conflict resolution is to remove them entirely.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- implements QEMU hardware part of memory hot unplug protocol
described at "docs/spec/acpi_mem_hotplug.txt"
- handles memory remove notification event
- handles device eject notification
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ram_addr_t is an internal interface, everyone should go through
MemoryRegion. Clean it up by making rom_add_blob return a
MemoryRegion* and using the new qemu_ram_resize infrastructure.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Capture the explicit setting of "usb=no" into a separate bool, and
use it to skip the update of machine->usb in the board init function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Coverity reports a truncation due to cast operation on operand
reltab->sh_size from 64 bits to 32 bits for calls of load_at.
Fix the types of the function arguments to match their use in
function load_at: the offset is used for lseek which takes an
off_t parameter, the size is used for g_malloc and read.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Move non-qdev-gpio[*] from /machine into /machine/unattached.
For the PC this moves 25 nodes from the stable namespace into the unstable.
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We now always send a JSON blob describing the migration file format as part
of the migration stream. However, some tools built around QEMU have proven
to stumble over this.
This patch gives the user the chance to disable said self-describing part of
the migration stream. To disable vmdesc submission, just add
-machine suppress-vmdesc=on
to your QEMU command line.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVAH/uAAoJECgfDbjSjVRprq0H/iyqLSHQIv6gNOPYQbLXOCv0
pkCeLx6kTMO9lSwxZcsZvMsYPeiEL3CHRKJcEjq0+Ap0uen0pa2Yl3WzyJcnBcib
xwkHk/UftFYAiZAzVtd4moXujvVLYNL1ukvr/wPOdIkTEn8U6K3NaT3pLooc369f
oTyQhlL3E9HJ5S6X0HXJIFwtsOIhPfS3NCLoDFbFjtb9mIsqTx7N5s2C5hctF+ir
JtyuwPx5oT73WYxoYmjSP6n/Nf5cuJdqtm6o2KijjhWWYMJ6epYVBo/DD6dIFbmJ
V/23dxpon+lvhae2c2LAVrkiJ1Boon/eMbJK/mNwpFX7vW35ataLPy6pYpaiEJs=
=RUld
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
misc fixes and cleanups
A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Mar 11 17:48:30 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (25 commits)
virtio-scsi: remove empty wrapper for cmd
virtio-scsi: clean out duplicate cdb field
virtio-scsi: fix cdb/sense size
uapi/virtio_scsi: allow overriding CDB/SENSE size
virtio-scsi: drop duplicate CDB/SENSE SIZE
exec: don't include hw/boards for linux-user
acpi: specify format for build_append_namestring
MAINTAINERS: drop aliguori@amazon.com
tpm: Move memory subregion function into realize function
virtio-pci: Convert to realize()
pci: Convert pci_nic_init() to Error to avoid qdev_init()
machine: query mem-merge machine property
machine: query dump-guest-core machine property
hw/boards: make it safe to include for linux-user
machine: query phandle-start machine property
machine: query kvm-shadow-mem machine property
kvm: add machine state to kvm_arch_init
machine: query kernel-irqchip property
machine: allowed/required kernel-irqchip support
machine: replace qemu opts with iommu property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running
qemu-bin ... -machine pc,mem-merge=on
leads to crash:
x86_64-softmmu/qemu-system-x86_64 -machine pc,dump-guest-core=on
qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed. Aborted
(core dumped)
This happens because the commit e79d5a6 ("machine: remove qemu_machine_opts
global list") removed the global option descriptions and moved them to
MachineState's QOM properties.
Fix this by querying machine properties through designated wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Running
qemu-bin ... -machine pc,dump-guest-core=on
leads to crash:
x86_64-softmmu/qemu-system-x86_64 -machine pc,dump-guest-core=on
qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed. Aborted
(core dumped)
This happens because the commit e79d5a6 ("machine: remove qemu_machine_opts
global list") removed the global option descriptions and moved them to
MachineState's QOM properties.
Fix this by querying machine properties through designated wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e79d5a6 ("machine: remove qemu_machine_opts global list") removed
the global option descriptions and moved them to MachineState's QOM
properties.
Query phandle-start by accessing machine properties through designated
wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e79d5a6 ("machine: remove qemu_machine_opts global list") removed
the global option descriptions and moved them to MachineState's QOM
properties.
Query kvm-shadow-mem by accessing machine properties through designated
wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The code using kernel-irqchip property requires 'allowed/required'
functionality. Replace machine's kernel_irqchip field with two fields
representing the new functionality and expose them through wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes a QEMU crash when passing iommu parameter in command line.
Running
x86_64-softmmu/qemu-system-x86_64 -machine pc,iommu=on -enable-kvm
leads to crash:
qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed.
Aborted (core dumped)
This happens because commit e79d5a6 ("machine: remove qemu_machine_opts global
list") removed the global option descriptions and moved them to MachineState's
QOM properties.
Fix this by querying machine properties through designated wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
- an extension to the elf loader to allow relocations
- make the ccw bios relocatable. This allows for bigger ramdisks
or smaller guests
- Handle all slow SIGPs in QEMU (instead of kernel) for better
compliance and correctness
- tell the KVM module the maximum guest size. This allows KVM
to reduce the number or page table levels
- Several fixes/cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=6Cw+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150310' into staging
s390x/kvm: Features and fixes for 2.3
- an extension to the elf loader to allow relocations
- make the ccw bios relocatable. This allows for bigger ramdisks
or smaller guests
- Handle all slow SIGPs in QEMU (instead of kernel) for better
compliance and correctness
- tell the KVM module the maximum guest size. This allows KVM
to reduce the number or page table levels
- Several fixes/cleanups
# gpg: Signature made Wed Mar 11 10:17:13 2015 GMT using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
* remotes/borntraeger/tags/s390x-20150310:
s390-ccw: rebuild BIOS
s390/bios: Make the s390-ccw.img relocatable
elf-loader: Provide the possibility to relocate s390 ELF files
s390-ccw.img: Reinitialize guessing on reboot
s390-ccw.img: Allow bigger ramdisk sizes or offsets
s390x/kvm: passing max memory size to accelerator
virtio-ccw: Convert to realize()
virtio-s390: Convert to realize()
virtio-s390: s390_virtio_device_init() can't fail, simplify
s390x/kvm: enable the new SIGP handling in user space
s390x/kvm: deliver SIGP RESTART directly if stopped
s390x: add function to deliver restart irqs
s390x/kvm: SIGP START is only applicable when STOPPED
s390x/kvm: implement handling of new SIGP orders
s390x/kvm: trace all SIGP orders
s390x/kvm: helper to set the SIGP status in SigpInfo
s390x/kvm: pass the SIGP instruction parameter to the SIGP handler
s390x/kvm: more details for SIGP handler with one destination vcpu
s390x: introduce defines for SIGP condition codes
synchronize Linux headers to 4.0-rc3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity/sparse fix for iscsi driver
- RCU fallout: fix -daemonize and s390x system emulation
- KVM: kvm_stat improvements and new man page
- x86: SYSRET fix for VxWorks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU/sUFAAoJEL/70l94x66D1JwIAJ28Lan2DQwi+xHvNxF8zW6n
v7eMc04/fepuon0TYmUZC3qbqc00sccEQZQ+yAAauT9epZ/kdSDudDOzG+3F4MuQ
/X3crXw2/jrhtWedGq49vFCONX4MKoaoudqK8kOFMe1ImQgkOYeAzOoqeFXyHsFh
jINlKTJZB6oKzrZ+SYryY14cO7pvGaIhyqaCC+6GcVihTjm9Yq13lP1lFj7LsVRV
aGfd6xH9RSV/mwzvZwD4i3cUWSUaV/wY0NDhAEzDPCUcxX0/nAj3XF1YeJUF30Qd
ETaCLo/Nxq2R6POK3c/Zm/FRLvjzZ2caD+q1LcwB/bCYdc2lJ1JDxE/hr48ANv0=
=OWXY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- scsi: improvements to error reporting and conversion to realize,
Coverity/sparse fix for iscsi driver
- RCU fallout: fix -daemonize and s390x system emulation
- KVM: kvm_stat improvements and new man page
- x86: SYSRET fix for VxWorks
# gpg: Signature made Tue Mar 10 10:18:45 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
x86: fix SS selector in SYSRET
scsi: Convert remaining PCI HBAs to realize()
scsi: Improve error reporting for invalid drive property
hw: Propagate errors through qdev_prop_set_drive()
scsi: Clean up duplicated error in legacy if=scsi code
cpus: initialize cpu->memory_dispatch
rcu: handle forks safely
qemu-thread: do not use PTHREAD_MUTEX_ERRORCHECK
kvm_stat: add kvm_stat.1 man page
kvm_stat: add column headers to text UI
iscsi: Fix check for username
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=hlbC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches for 2.3
# gpg: Signature made Tue Mar 10 13:03:17 2015 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (73 commits)
MAINTAINERS: Add jcody as blockjobs, block devices maintainer
iotests: add O_DIRECT alignment probing test
block/raw-posix: fix launching with failed disks
MAINTAINERS: Add jsnow as IDE maintainer
sheepdog: Fix misleading error messages in sd_snapshot_create()
Add testcase for scsi-hd devices without drive property
scsi-hd: fix property unset case
block/vdi: Add locking for parallel requests
iotests: Drop vpc from 004's and 104's format list
iotests: Remove 006
iotests: Fix 051's reference output
virtio-blk: Remove the stale FIXME comment
tests: Check QVIRTIO_F_ANY_LAYOUT flag in virtio-blk test
libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.c
sheepdog: fix confused return values
qtest/ahci: add fragmented dma test
qtest/ahci: Add PIO and LBA48 tests
qtest/ahci: Add DMA test variants
libqos/ahci: add ahci command helpers
qtest/ahci: Add a macro bootup routine
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
geometry: hd_geometry_guess function autodetects the drive geometry.
This patch adds a block backend call, that probes the backing device
geometry. If the inner driver method is implemented and succeeds
(currently only for DASDs), the blkconf_geometry will pass-through
the backing device geometry. Otherwise will fallback to old logic.
blocksize: This patch initializes blocksize properties to 0.
In order to set the property a blkconf_blocksizes was introduced.
If user didn't set physical or logical blocksize, it will
retrieve its value from a driver (only succeeds for DASD), otherwise
it will set default 512 value.
The blkconf_blocksizes call was added to all users of BlkConf.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-6-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Three kinds of callers:
1. On failure, report the error and abort
Passing &error_abort does the job. No functional change.
2. On failure, report the error and exit()
This is qdev_prop_set_drive_nofail(). Error reporting moves from
qdev_prop_set_drive() to its caller. Because hiding away the error
in the monitor right before exit() isn't helpful, replace
qerror_report_err() by error_report_err(). Shouldn't make a
difference, because qdev_prop_set_drive_nofail() should never be
used in QMP context.
3. On failure, report the error and recover
This is usb_msd_init() and scsi_bus_legacy_add_drive(). Error
reporting and freeing the error object moves from
qdev_prop_set_drive() to its callers.
Because usb_msd_init() can't run in QMP context, replace
qerror_report_err() by error_report_err() there.
No functional change.
scsi_bus_legacy_add_drive() calling qerror_report_err() is of
course inappropriate, but this commit merely makes it more obvious.
The next one will clean it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425925048-15482-3-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On s390, we would like to load our "BIOS" s390-ccw.img to the end of the
RAM. Therefor we need the possibility to relocate the ELF file so that
it can also run from different addresses. This patch adds the necessary
code to the QEMU ELF loader function.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Message-Id: <1425895973-15239-2-git-send-email-thuth@linux.vnet.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
=LY/j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (130 commits)
acpi: drop unused code
aml-build: comment fix
acpi-build: fix typo in comment
acpi: update generated files
vhost user:support vhost user nic for non msi guests
aml-build: fix build for glib < 2.22
acpi: update generated files
Makefile.target: binary depends on config-devices
acpi-test-data: update after pci rewrite
acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
pci-hotplug-old: Has been dead for five major releases, bury
pci: Give a few helpers internal linkage
acpi: make build_*() routines static to aml-build.c
pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
pc: acpi-build: drop template patching and create PCI bus tree dynamically
tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
pc: acpi-build: simplify PCI bus tree generation
tests: add ACPI blobs for qemu with bridge cases
tests: bios-tables-test: add support for testing bridges
tests: ACPI test blobs update due to PCI0._CRS changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
hw/pci/pci-hotplug-old.c
- bootdevice, iscsi, virtio-scsi fixes
- build system patches for MinGW and config-devices.mak
- qemu_mutex_lock_iothread deadlock fixes
- another tiny patch from the record/replay series
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU9DRyAAoJEL/70l94x66D5ZkH/2SPp4rrLIgotyzHTIaMvi+2
0gB7Bks9cDisFyiSgr6dqLp9CV1XMlv/NZl+z+H/7og96qhBWjAKVpG1J/En55bS
vanFeWGYjINuQLnhC3pqBi2kmEkzBQSIMJZt9WnDydfQj/6Wgcr6iabOpd8eTjTz
rqE/UcV2L1baFPLy/Wky2vg/a5Ug2rj+fqvjRdFB/Zx8yDYLcKYJlI8utSQexamE
tUcxr/AqxNOoe6WZD7CCVNmHMHvajoOhWnVY4EgHDg8L3nNSgvDF3AjYfntU6A2y
HjkS0ktvQK666oNo+ORRBzLe3s9nCfB1dMK2ZiKKyFfyuYD50d2N3oHKSAIsEJo=
=AQjO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- more config options
- bootdevice, iscsi, virtio-scsi fixes
- build system patches for MinGW and config-devices.mak
- qemu_mutex_lock_iothread deadlock fixes
- another tiny patch from the record/replay series
# gpg: Signature made Mon Mar 2 09:59:14 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
cpus: be more paranoid in avoiding deadlocks
cpus: fix deadlock and segfault in qemu_mutex_lock_iothread
virtio-scsi: Allocate op blocker reason before blocking
Makefile.target: binary depends on config-devices
Makefile: don't silence mak file test with V=1
Makefile: fix up parallel building under MSYS+MinGW
iscsi: Handle write protected case in reopen
Give ivshmem its own config option
Create specific config option for "platform-bus"
Add specific config options for PCI-E bridges
bootdevice: fix segment fault when booting guest with '-kernel' and '-initrd'
timer: replace time() with QEMU_CLOCK_HOST
virtio-scsi-dataplane: Call blk_set_aio_context within BQL
block: Forbid bdrv_set_aio_context outside BQL
scsi: give device a parent before setting properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the "platform-bus" device is included for all softmmu builds.
This bridge is intended for use on any platforms that require dynamic
creation of sysbus devices. However, at present it is used only for the
PPC E500 target, with plans for the ARM "virt" target in the immediate
future.
To avoid a not-very-useful entry appearing in "qemu -device ?" output on
other targets, this patch makes a specific config option for platform-bus
and enables it (for now) only on ppc configurations which include E500
and on ARM (which always includes the "virt" target).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1425017077-18487-3-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-global lets you set a nice booby-trap for yourself:
$ qemu-system-x86_64 -nodefaults -S -display none -usb -monitor stdio -global usb-mouse.usb_version=l
QEMU 2.1.94 monitor - type 'help' for more information
(qemu) device_add usb-mouse
Parameter 'usb_version' expects an int64 value or range
$ echo $?
1
Not nice. Until commit 3196270 we even abort()ed.
The same error triggers if you manage to screw up a machine type's
compat_props. To demonstrate, change HW_COMPAT_2_1's entry to
.driver = "usb-mouse",\
.property = "usb_version",\
.value = "1", \
Then run
$ qemu-system-x86_64 -usb -M pc-i440fx-2.1 -device usb-mouse
upstream-qemu: -device usb-mouse: Parameter 'usb_version' expects an int64 value or range
$ echo $?
1
One of our creatively cruel error messages.
Since this is actually a coding error, we *should* abort() here.
Replace the error by an assertion failure in this case.
But turn the fatal error into a mere warning when the faulty
GlobalProperty comes from the user. Looks like this:
$ qemu-system-x86_64 -nodefaults -S -display none -usb -monitor stdio -global usb-mouse.usb_version=l
QEMU 2.1.94 monitor - type 'help' for more information
(qemu) device_add usb-mouse
Warning: global usb-mouse.usb_version=l ignored (Parameter 'usb_version' expects an int64 value or range)
(qemu)
This is consistent with how we handle similarly unusable -global in
qdev_prop_check_globals().
You could argue that the error should make device_add fail. Would be
harder, because we're running within TypeInfo's instance_post_init()
method device_post_init(), which can't fail.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU4hugAAoJEL/70l94x66DZXEH/i72tOgvKZfAjfq2xmHXNEsr
roCfTFIIjKK7feyW6YgwT5pgex6I5umFsO+uIyI/wbu8nDl/3NYEQBT4fR2cGfli
GKeJOEu8kf+Zt8U+fbxyVQclbuU5S0Ujsg1fX4QXC4swB5fGLT2cRWJ5qd6hKBQs
GflBuLa7h4eOzcTtOPpqRIwZ8mQE0uxv/hKq9kYLKHXJN2aWsiOls8KQ2CXj2yAl
p6bMS5f0H0S/1hvQcQV9EazX7owlPIEet3AmSL1TC2sjJ8hrNGMBoFPtUys1uqjc
B3CwuGi0JtWIduFYV9vZ/Ze4G7Y2iZlqc5vDxIl94d+iFmoHymDOi3mFUZ3H8XQ=
=Lk9p
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- vhost-scsi: add bootindex property
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
# gpg: Signature made Mon Feb 16 16:32:32 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (21 commits)
Convert ram_list to RCU
exec: convert ram_list to QLIST
cosmetic changes preparing for the following patches
exec: protect mru_block with RCU
rcu: add g_free_rcu
rcu: introduce RCU-enabled QLIST
exec: RCUify AddressSpaceDispatch
exec: make iotlb RCU-friendly
exec: introduce cpu_reload_memory_map
docs: clarify memory region lifecycle
pci: split shpc_cleanup and shpc_free
pcie: remove mmconfig memory leak and wrap mmconfig update with transaction
memory: keep the owner of the AddressSpace alive until do_address_space_destroy
rcu: run RCU callbacks under the BQL
rcu: do not let RCU callbacks pile up indefinitely
vhost-scsi: set the bootable value of channel/target/lun
vhost-scsi: add a property for booting
vhost-scsi: expose the TYPE_FW_PATH_PROVIDER interface
vhost-scsi: add bootindex property
qdev: support to get a device firmware path directly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.
Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.
Exceptions:
* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
sun4m_hmp_info_pic().
* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
lm32_hmp_info_pic().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We get two error messages: a specific one from qdev_init(), and a
generic one from qdev_init_nofail(). The specific one gets suppressed
in QMP context. qdev_init_nofail() failing there is a bug, though.
Cut out the qdev_init() middle-man: realize the device, and on error
exit with a single error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Currently when *obj is not a TYPE_DEVICE, QEMU will abort. This patch
fixes it. When *obj is not a TYPE_DEVICE, just do not add it to hotpluggable
device list.
This patch also fixes the following issue:
1. boot QEMU using cli:
$ /opt/qemu-git-arm/bin/qemu-system-x86_64 -monitor stdio -enable-kvm \
-device virtio-scsi-pci,id=scsi0
2. device_del scsi0 via hmp using tab key(first input device_del, then press
"Tab" key).
(qemu) device_del
After step 2, QEMU will abort.
(qemu) device_del hw/core/qdev.c:930:qdev_build_hotpluggable_device_list:
Object 0x5555563a2460 is not an instance of type device
Signed-off-by: Jun Li <junmuzi@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
commit 6b1566c (qdev: Introduce FWPathProvider interface) did a
good job for supproting to get firmware path on some different
architectures.
Moreover further more, we can use the interface to get firmware
path name for a device which isn't attached a specific bus,
such as virtio-bus, scsi-bus etc.
When the device (such as vhost-scsi) realize the TYPE_FW_PATH_PROVIDER
interface, we should introduce a new function to get the correct firmware
path name for it.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Xen ioreq-server API, introduced in Xen 4.5, requires that PCI device
models explicitly register with Xen for config space accesses. This patch
adds a listener interface into qdev-core which can be used by the Xen
interface code to monitor for arrival and departure of PCI devices.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This makes ROM blocks resizeable. This infrastructure is required for other
functionality we have queued.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUrme8AAoJECgfDbjSjVRpqmEH/1APnrphAi/CM6rxf2hPyvWj
f5yQDNXfeGxrHaW5vux6DvgHUkTng6KGBxz6XMSiwul6MeyRFNDqwbfMhSHjiIum
QkT//jqb5xux60kyTLXuIBTPok1SsKDtaTxbvZb0VmZrnkdYeI2CLa1Mq3cQUY0a
8DKnchQEM5lic9bxj+OuLiDFx8QYaMpQlUP9iIvNq6GjX+0zNsWvfPtkMTm00t93
lHKPvD2eVmrgfS5g+lkAwLDahLSjqwDc0YuLABOgDUFsZFz9GAUCHSpt0y8HEBwR
1NhGCfbnyyRl/1OSULtARGQ4Ddwm5dn1i5I4usoP5rLFS7FV5F7xhBu0IZlwgVA=
=pFmm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc: resizeable ROM blocks
This makes ROM blocks resizeable. This infrastructure is required for other
functionality we have queued.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 08 Jan 2015 11:19:24 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
acpi-build: make ROMs RAM blocks resizeable
memory: API to allocate resizeable RAM MR
arch_init: support resizing on incoming migration
exec: qemu_ram_alloc_resizeable, qemu_ram_resize
exec: split length -> used_length/max_length
exec: cpu_physical_memory_set/clear_dirty_range
memory: add memory_region_set_size
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Following QOM convention, object properties should
not be accessed directly.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-3-git-send-email-marcel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use resizeable ram API so we can painlessly extend ROMs in the
future. Note: migration is not affected, as we are
not actually changing the used length for RAM, which
is the part that's migrated.
Use this in acpi: reserve x16 more RAM space.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
In the next patch we'd like to reuse the image decompression facility
without installing the output as a ROM at a specific guest-phys address.
In addition, expose LOAD_IMAGE_MAX_GUNZIP_BYTES, because that's a
straightforward "max_sz" argument for the new load_image_gzipped_buffer().
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-10-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU has support for options per machine, keeping
a global list of options is no longer necessary.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418217570-15517-2-git-send-email-marcel.a@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 1ceef9f273 (net: multiqueue
support) tries to use set_pointer() and get_pointer() to set and get
NICPeers which is not a pointer defined in DEFINE_PROP_NETDEV. This
trick works but result a unclean and fragile implementation (e.g
print_netdev and parse_netdev).
This patch solves this issue by not using set/get_pinter() and set and
get netdev directly in set_netdev() and get_netdev(). After this the
parse_netdev() and print_netdev() were no longer used and dropped from
the source.
[Renamed 'err' label to 'out' as suggested by Markus Armbruster.
--Stefan]
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The commits:
- 6a1fa9f5 (monitor: add del completion for peripheral device)
- 66e56b13 (qdev: add qdev_build_hotpluggable_device_list helper)
cause a QEMU crash when trying to use HMP device_del auto-completion.
It can be easily reproduced by:
<qemu-bin> -enable-kvm ~/images/fedora.qcow2 -monitor stdio -device virtio-net-pci,id=vnet
(qemu) device_del
/home/mapfelba/git/upstream/qemu/hw/core/qdev.c:941:qdev_build_hotpluggable_device_list: Object 0x7f6ce04e4fe0 is not an instance of type device
Aborted (core dumped)
The root cause is qdev_build_hotpluggable_device_list going recursively over
all peripherals and their children assuming all are devices. It doesn't work
since PCI devices have at least on child which is a memory region (bus master).
Solved by observing that all devices appear as direct children of
/machine/peripheral container. No need of going recursively
over all the children.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reported-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1417002601-20799-1-git-send-email-marcel.a@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
acpi build modifies internal FW CFG RAM on first access
but we forgot to mark it dirty.
If this RAM has been migrated already, it won't be
migrated again, returning corrupted tables to guest.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
lseek will return -1 on error, g_malloc0(size) and read(,,size)
paramenters cannot be negative. We should add a check for return
value of lseek().
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need to support spawning of sysbus devices dynamically via the command line.
The easiest way to represent these dynamically spawned devices in the guest's
memory and IRQ layout is by preallocating some space for dynamic sysbus devices.
This is what the "platform bus" device does. It is a sysbus device that exports
a configurably sized MMIO region and a configurable number of IRQ lines. When
this device encounters sysbus devices that have been dynamically created and not
manually wired up, it dynamically connects them to its own pool of resources.
The machine model can then loop through all of these devices and create a guest
configuration (device tree) to make them visible to the guest.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices have a range of MMIO regions they expose. The exact number
of regions is device specific and internal information to the device model.
Expose whether a region exists via a public interface. That way our platform
bus enumeration code can dynamically determine how many regions exist.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices can get their IRQ lines connected to other devices. It is
possible to figure out which IRQ line a connection is on and whether a sysbus
device even provides an IRQ connector at a specific offset.
This patch exposes helpers to make this information publicly accessible. We
will need it for the platform bus dynamic sysbus enumeration.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we can properly map sysbus devices that haven't been connected to
something forcefully by C code, we can allow the -device command line option
to spawn them.
For machines that don't implement dynamic sysbus assignment in their board
files we add a new bool "has_dynamic_sysbus" to the machine class.
When that property is false (default), we bail out when we see dynamically
spawned sysbus devices, like we did before.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices can be spawned by C code or dynamically via the command line.
In the latter case, we need to be able to find the dynamically created devices
to do things with them.
This patch adds a search helper that makes it easy to look for dynamically
spawned sysbus devices.
Signed-off-by: Alexander Graf <agraf@suse.de>
Kevin Wolf