When using the e6500 CPU, QEMU generates a fatal error after
complaining about registering SPR 604 twice.
Building and testing with commit
9b2e891ec5 shows the issue:
qemu-system-ppc64 --version
QEMU emulator version 3.1.50 (v3.1.0-456-g9b2e891ec5-dirty)
Copyright (c) 2003-2018 Fabrice Bellard and the QEMU Project developers
qemu-system-ppc64 -M none -cpu e6500
Error: Trying to register SPR 604 (25c) twice !
Signed-off-by: Jon Diekema <jon.diekema@ge.com>
Message-Id: <CALvuzg43uSodseEHjNaRcPFBKKPTY2mcppUbYgiLL=QO9RxX_Q@mail.gmail.com>
[removed duplicated mail header in the commit message]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The VSX register array is a block of 64 128-bit registers where the first 32
registers consist of the existing 64-bit FP registers extended to 128-bit
using new VSR registers, and the last 32 registers are the VMX 128-bit
registers as show below:
64-bit 64-bit
+--------------------+--------------------+
| FP0 | | VSR0
+--------------------+--------------------+
| FP1 | | VSR1
+--------------------+--------------------+
| ... | ... | ...
+--------------------+--------------------+
| FP30 | | VSR30
+--------------------+--------------------+
| FP31 | | VSR31
+--------------------+--------------------+
| VMX0 | VSR32
+-----------------------------------------+
| VMX1 | VSR33
+-----------------------------------------+
| ... | ...
+-----------------------------------------+
| VMX30 | VSR62
+-----------------------------------------+
| VMX31 | VSR63
+-----------------------------------------+
In order to allow for future conversion of VSX instructions to use TCG vector
operations, recreate the same layout using an aligned version of the existing
vsr register array.
Since the old fpr and avr register arrays are removed, the existing callers
must also be updated to use the correct offset in the vsr register array. This
also includes switching the relevant VMState fields over to using subarrays
to make sure that migration is preserved.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Because it is a recommended coding practice (see HACKING).
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The ptcr (partition table control register) is used to store the address
and size of the partition table. For nested kvm-hv we have a level 1
guest register the location of it's partition table with the hypervisor.
Thus to support migration we need to be able to read this out of kvm
and restore it post migration.
Add the one reg id for the ptcr.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
External PID is a mechanism present on BookE 2.06 that enables application to
store/load data from different address spaces. There are special version of some
instructions, which operate on alternate address space, which is specified in
the EPLC/EPSC regiser.
This implementation uses two additional MMU modes (mmu_idx) to provide the
address space for the load and store instructions. The QEMU TLB fill code was
modified to recognize these MMU modes and use the values in EPLC/EPSC to find
the proper entry in he PPC TLB. These two QEMU TLBs are also flushed on each
write to EPLC/EPSC.
Following instructions are implemented: dcbfep dcbstep dcbtep dcbtstep dcbzep
dcbzlep icbiep lbepx ldepx lfdepx lhepx lwepx stbepx stdepx stfdepx sthepx
stwepx.
Following vector instructions are not: evlddepx evstddepx lvepx lvepxl stvepx
stvepxl.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Calling error_report() in a function that takes an Error ** argument
is suspicious. Convert a few that are actually warnings to
warn_report().
While there, split a warning consisting of multiple sentences to
conform to conventions spelled out in warn_report()'s contract.
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Wei Huang <wei@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20181017082702.5581-5-armbru@redhat.com>
There is no known available OS for ppc around anymore that uses page
sizes below 4k, so it does not make much sense that we keep wasting
our time on building and testing the ppcemb-softmmu target. It has
been deprecated since two releases, and nobody complained, so let's
remove this now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add support for DBCR (debug control register) based debugging as used on
BookE ppc. So far supports only branch and single-step events, but these are
the important ones. GDB in Linux guest can now do single-stepping.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
While just setting the MSR bits is sufficient, we can tidy
the helper code by extracting the MSR test to a helper and
then forcing it true for user-only.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows faults from MO_ALIGN to have the same effect
as from gen_check_align.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
CPUPPCState currently contains a number of fields containing the state of
the VPA. The VPA is a PAPR specific concept covering several guest/host
shared memory areas used to communicate some information with the
hypervisor.
As a PAPR concept this is really machine specific information, although it
is per-cpu, so it doesn't really belong in the core CPU state structure.
There's also other information that's per-cpu, but platform/machine
specific. So create a (void *)machine_data in PowerPCCPU which can be
used by the machine to locate per-cpu data. Intialization, lifetime and
cleanup of machine_data is entirely up to the machine type.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
According to PowerISA, the PIR register should be readable in privileged
mode also, not only in hypervisor privileged mode.
PowerISA 3.0 - 4.3.3 Processor Identification Register
"Read access to the PIR is privileged; write access is not provided."
Figure 18 in section 4.4.4 explicitly confirms that mfspr PIR is privileged
and doesn't require hypervisor state.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Leandro Lupori <leandro.lupori@gmail.com>
Reviewed-by: Jose Ricardo Ziviani <joserz@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The powerpc Linux kernel[1] and skiboot firmware[2] recently gained changes
that cause the Processor Compatibility Register (PCR) SPR to be cleared.
These changes cause Linux to fail to boot on the Qemu powernv machine
with an error:
Trying to write privileged spr 338 (0x152) at 0000000030017f0c
With this patch Qemu makes this register available as a hypervisor
privileged register.
Note that bits set in this register disable features of the processor.
Currently the only register state that is supported is when the register
is zeroed (enable all features). This is sufficient for guests to
once again boot.
[1] https://lkml.kernel.org/r/20180518013742.24095-1-mikey@neuling.org
[2] https://patchwork.ozlabs.org/patch/915932/
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rename the 2.13 machines to match the number we're going to
use for the next release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id: 20180522104000.9044-5-peter.maydell@linaro.org
osdep.h is only needed for files that are compiled directly.
Remove it from included C source files, and rename them to
*.inc.c so that scripts/clean-includes knows to skip them.
Cc: Eric Blake <eblake@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jon Diekema