Aiming for GTK as replacement for SDL, a feature like -full-screen should also
be implemented.
Bringing the window into full-screen mode is done by activating the "Fullscreen"
menu item. This is done after showing the windows to make the cursor and menu
hidden.
v2: drop -no-frame implementation, use booleans instead of ints and ensure
consistency between ui state and menu.
Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET,
and it was issued as a bottom-half:
86e94dea5b
Which we basically used to print out a greeting/prompt for the
monitor.
AFAICT the only reason this was ever done in a BH was because in
some cases we'd modify the chr_write handler for a new chardev
backend *after* the site where we issued the reset (see:
86e94d:qemu_chr_open_stdio())
At some point this event was renamed to CHR_EVENT_OPENED, and we've
maintained the use of this BH ever since.
However, due to 9f939df955, we schedule
the BH via g_idle_add(), which is causing events to sometimes be
delivered after we've already begun processing data from backends,
leading to:
known bugs:
QMP:
session negotation resets with OPENED event, in some cases this
is causing new sessions to get sporadically reset
potential bugs:
hw/usb/redirect.c:
can_read handler checks for dev->parser != NULL, which may be
true if CLOSED BH has not been executed yet. In the past, OPENED
quiesced outstanding CLOSED events prior to us reading client
data. If it's delayed, our check may allow reads to occur even
though we haven't processed the OPENED event yet, and when we
do finally get the OPENED event, our state may get reset.
qtest.c:
can begin session before OPENED event is processed, leading to
a spurious reset of the system and irq_levels
gdbstub.c:
may start a gdb session prior to the machine being paused
To fix these, let's just drop the BH.
Since the initial reasoning for using it still applies to an extent,
work around that by deferring the delivery of CHR_EVENT_OPENED until
after the chardevs have been fully initialized, toward the end of
qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This
defers delivery long enough that we can be assured a CharDriverState
is fully initialized before CHR_EVENT_OPENED is sent.
Also, rather than requiring each chardev to do an explicit open, do it
automatically, and allow the small few who don't desire such behavior to
suppress the OPENED-on-init behavior by setting a 'explicit_be_open'
flag.
We additionally add missing OPENED events for stdio backends on w32,
which were previously not being issued, causing us to not recieve the
banner and initial prompts for qmp/hmp.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1370636393-21044-1-git-send-email-mdroth@linux.vnet.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The current icon looks pretty terrible rendered in Gnome. This
switches to a transparent SVG which looks much nicer.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's not a GObject.
Cc: Gerd Hoffman <kraxel@redhat.com>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- Fix summary to agree with code (Peter)
This should fix building the GTK+ front-end on BSDs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368533121-30796-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 9697f5d2d3 "gtk: custom cursor support"
introduced unconditional usage of gdk_display_warp_pointer(). This function
is marked as deprecated since GTK-3.0, and triggers warning (error with -Werror)
during compilation.
Conditionally change gdk_display_warp_pointer() method usage to gdk_device_warp
usage, as suggested by compiler.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 1368197985-44608-1-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
DisplayChangeListener gets a new QemuConsole field, which can be set to
non-NULL before registering. This will pin the QemuConsole, so that
particular DisplayChangeListener will not follow console switches.
spice+gtk (which don't support text console input anyway) are switched
over to be pinned to console 0, which usually is the graphical display.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add QemuConsole parameter to vga_hw_*, so the interface allows to update
non-active consoles (the actual code can't handle this yet, see next
patch). Passing NULL is allowed and updates the active console, like
the functions do today.
While touching all vga_hw_* calls anyway rename that to the functions to
hardware-neutral graphics_hw_*
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The QEMU icon which is already used for SDL
is now also loaded by GTK.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1364653300-26813-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To better reflect that it is for handling a backend being opened.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-3-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This solves, e.g., sticky ALT when selecting a GTK menu, switching to a
different window or selecting a different virtual console.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 514F417A.6010908@web.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that nobody depends on DisplayState in DisplayChangeListener
callbacks any more we can remove the parameter from all callbacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rework DisplayStateListener callbacks to not use the DisplayState
any more. Factor out the window size handling to a separate function,
so the zoom callbacks can call that directly instead of abusing the
gd_switch DisplayStateListener callback for that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the dpy_gfx_resize and dpy_gfx_setdata DisplayChangeListener
callbacks with a dpy_gfx_switch callback which notifies the ui code
when the framebuffer backing storage changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's broken by design. There can be multiple DisplayChangeListener
instances, so they simply can't store state in the (single) DisplayState
struct. Try 'qemu -display gtk -vnc :0', watch it crash & burn.
With DisplayChangeListenerOps having a more sane interface now we can
simply use the DisplayChangeListener pointer to get access to our
private data instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split callbacks into separate Ops struct. Pass DisplayChangeListener
pointer as first argument to all callbacks. Uninline a bunch of
display functions and move them from console.h to console.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'vc' support to qapi and also switches over the
vc chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GDK_KEY_XXX symbols are new in GTK3 and only the most
recent GTK2 releases. Most versions of GTK2 have simply
used GDK_XXX
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-14-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The gtk_widget_get_realized method only arrived in GTK 2.20,
so defined a compat macro for earlier GTK
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-13-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In GTK3 the 'expose-event' signal has been replaced by a new
'draw' signal. The only difference is that the latter will
pre-create the cairo drawing context & set the clip mask.
Since the drawing code is already structured in a nice way,
we can just wire up the 'gd_draw_event' method to the 'draw'
signal in GTK3
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-10-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The gtk_widget_size_request method has been replaced by
the gtk_widget_get_preferred_size method in GTK3. Conditionally
call the new method in GTK3
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-9-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In GTK3 the gdk_display_warp_pointer method is deprecated.
Instead we should use gdk_device_warp on the GdkDevice
instead associated with the event being processed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-8-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The gtk_menu_append method has long been deprecated in favour
of the gtk_menu_shell_append method. The former is now entirely
gone in GTK3, so switch all code to the latter which works on
both GTK2 and GTK3
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-7-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The GtkVBox class is deprecated, in favour of just using the
GtkBox class directly. Eventually even GtkBox will be
deprecated in favour of GtkGrid, but that is a bigger fix
which can wait.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-6-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On GTK3 there is support for multiple pointer devices, so
rather than using gdk_pointer_grab / gdk_pointer_ungrab
we should iterate over all devices, grabbing each one in
turn
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-5-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On GTK3 there is support for multiple keyboard devices, so
rather than using gdk_keyboard_grab / gdk_keyboard_ungrab
we should iterate over all devices, grabbing each one in
turn
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-4-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The gdk_drawable_get_screen and gdk_drawable_get_display
methods don't exist in GDK3. Fortunately, even on GTK2
they are not required - we can call the equivalent
gtk_widget_get_screen/gtk_widget_get_display methods
which have existed since GTK 2.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-3-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
GTK3 lacks the gdk_drawable_get_size method, so we create a
stub impl which gets the get_width/get_height mehtods instead
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-2-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds basic guest control commands to the "Machine" menu - a nice
added-value for the GTK UI.
We use "pause" as the term for stopping the machine here. So reword also
the related caption tag.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reduces the required translations and gives a nicer menu
with an icon.
The full screen menu item is no longer a check menu item.
A checked item is not visible in full screen mode,
so it is not needed for this special menu item.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1361561614-11180-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is needed for current Debian stable (Squeeze).
VTE versions before 0.26 did not support VtePty.
Lower the version requirement and use alternate code which works for Debian.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1361560199-28906-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
One part of this patch reverts commit 22bc9a46, which disabled the
warning. The rest of it deals with the warning by adding a #pragma for
newer gcc and by disabling -Werror for compilers that can't deal with
the #pragma.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1361563731-13307-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
At least for Ubuntu Linux locale.h is needed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1361514481-26164-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If you're full screen, you probably expect Ctrl-Q to go to the guest,
not the host. I think restricting certain menus is the right way to
handle this generally speaking.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-10-git-send-email-aliguori@us.ibm.com
This includes a de_DE translation from Kevin Wolf and an it translation from
Paolo Bonzini.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-8-git-send-email-aliguori@us.ibm.com
Basic menu items to enter full screen mode and zoom in/out. Unlike SDL, we
don't allow arbitrary scaling based on window resizing. The current behavior
with SDL causes a lot of problems for me.
Sometimes I accidentally resize the window a tiny bit while trying to move it
(Ubuntu's 1-pixel window decorations don't help here). After that, scaling is
now active and if the screen changes size again, badness ensues since the
aspect ratio is skewed.
Allowing zooming by 25% in and out should cover most use cases. We can add a
more flexible scaling later but for now, I think this is a more friendly
behavior.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-7-git-send-email-aliguori@us.ibm.com
There is a small deviation from SDL's behavior here. Instead of Ctrl+Alt
triggering grab, we now use Ctrl-Alt-g to trigger grab.
GTK will not accept Ctrl+Alt as an accelerator since it just consists of
modifiers. Having grab as a proper accelerator is important as it allows a user
to override the accelerator for accessibility purposes.
We also are not automatically grabbing on left-click. Besides the inability to
tie mouse clicks to an accelerator, I think this behavior is hard to discover
and since it only happens depending on the guest state, it can lead to confusing
behavior.
This can be changed in the future if there's a strong resistence to dropping
left-click-to-grab, but I think we're better off dropping it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-6-git-send-email-aliguori@us.ibm.com
This enables VteTerminal to be used to render the text consoles. VteTerminal is
the same widget used by gnome-terminal which means it's VT100 emulation is as
good as they come.
It's also screen reader accessible, supports copy/paste, proper scrolling and
most of the other features you would expect from a terminal widget.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-5-git-send-email-aliguori@us.ibm.com
This is minimalistic and just contains the basic widget infrastructure. The GUI
consists of a menu and a GtkNotebook. To start with, the notebook has its tabs
hidden which provides a UI that looks very similar to SDL with the exception of
the menu bar.
The menu bar allows a user to toggle the visibility of the tabs. Cairo is used
for rendering.
I used gtk-vnc as a reference. gtk-vnc solves the same basic problems as QEMU
since it was originally written as a remote display for QEMU. So for the most
part, the approach to rendering and keyboard handling should be pretty solid for
GTK.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-4-git-send-email-aliguori@us.ibm.com
Peter Wu