When allowing multiple down-events in a row (key autorepeat) we can't
use change_bit() any more to update the state, because autorepeat events
don't change the key state. We have to explicitly use set_bit() and
clear_bit() instead.
Cc: qemu-stable@nongnu.org
Fixes: 3592186015 kbd-state: don't block auto-repeat events
Buglink: https://bugs.launchpad.net/qemu/+bug/1828272
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190514042443.10735-1-kraxel@redhat.com
In a GVT-g setup with dmabuf and GTK GUI, the current 2D texture at
surface_gl_update_texture is not necessarily
surface->texture. Adding a glBindTexture fixes related crashes and
artifacts, and is generally more secure.
Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Tested-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190507080501.26712-1-marcel.apfelbaum@gmail.com
[fixed malformed patch, rebase to master]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The chars/attr fields are curses internals, setcchar and getcchar have
to be used instead.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Kamil Rytarowski <n54@gmx.com>
Message-Id: <20190427183307.12796-3-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
E.g. BSD and Solaris even use locale-specific encoding there.
We thus have to go through the native multibyte representation and use
mbrtowc/wcrtomb to make a proper conversion.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Kamil Rytarowski <n54@gmx.com>
Message-Id: <20190427183307.12796-2-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On some systems wchar_t is "long int", on others just "int".
So go cast to "long int" and adjust the printf format accordingly.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190402073018.17747-1-kraxel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of cleanup-trace-events.pl. Same funnies as in the
previous commit, of course. Manually shorten its change to
linux-user/trace-events to */signal.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The iconv_t are opened but never closed.
Spotted by Coverity: CID 1399708
Spotted by Coverity: CID 1399709
Spotted by Coverity: CID 1399713
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190314172524.9290-1-samuel.thibault@ens-lyon.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
cchar_t can contain not only attr and chars fields, but also ext_color.
Initialize the whole structure to zero instead of enumerating fields.
Spotted by Coverity: CID 1399711
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190315130932.26094-1-samuel.thibault@ens-lyon.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When adding '-fsanitize=undefined' in compiling configuration
and connect VM with vnc, it reports following error:
ui/vnc-enc-tight.c:910:13: runtime error: load of
misaligned address 0x621000466513 for type 'uint32_t',
which requires 4 byte alignment
This patch fix this issue.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-id: 20190318010442.14897-1-liq3ea@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This uses iconv to convert glyphs from the specified VGA font encoding to
unicode, and makes use of cchar_t instead of chtype when using ncursesw,
which allows to store all wide char as well as the WACS values. The default
charset is made CP437 since that is the charset of the hardware default VGA
font. This also makes the curses backend set the LC_CTYPE locale to "" to
allow curses to emit wide characters.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Eddie Kohler <ekohler@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190311135127.2229-3-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
curses will use it for proper wide output support.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190311135127.2229-2-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I had to include an enum for audio sampling formats into qapi, but that
meant duplicating the audfmt_e enum. This patch replaces audfmt_e and
associated values with the qapi generated AudioFormat enum.
This patch is mostly a search-and-replace, except for switches where the
qapi generated AUDIO_FORMAT_MAX caused problems.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server has historically had support for ACLs to check both the
SASL username and the TLS x509 distinguished name. The VNC server was
responsible for creating the initial ACL, and the client app was then
responsible for populating it with rules using the HMP 'acl_add' command.
This is not satisfactory for a variety of reasons. There is no way to
populate the ACLs from the command line, users are forced to use the
HMP. With multiple network services all supporting TLS and ACLs now, it
is desirable to be able to define a single ACL that is referenced by all
services.
To address these limitations, two new options are added to the VNC
server CLI. The 'tls-authz' option takes the ID of a QAuthZ object to
use for checking TLS x509 distinguished names, and the 'sasl-authz'
option takes the ID of another object to use for checking SASL usernames.
In this example, we setup two authorization rules. The first allows any
client with a certificate issued by the 'RedHat' organization in the
'London' locality. The second ACL allows clients with either the
'joe@REDHAT.COM' or 'fred@REDHAT.COM' kerberos usernames. Both checks
must pass for the user to be allowed.
$QEMU -object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-simple,id=authz0,policy=deny,\
rules.0.match=O=RedHat,,L=London,rules.0.policy=allow \
-object authz-simple,id=authz1,policy=deny,\
rules.0.match=fred@REDHAT.COM,rules.0.policy=allow \
rules.0.match=joe@REDHAT.COM,rules.0.policy=allow \
-vnc 0.0.0.0:1,tls-creds=tls0,tls-authz=authz0,
sasl,sasl-authz=authz1 \
...other QEMU args...
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20190227145755.26556-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc aborts display update jobs on video mode switches and page flips.
That can cause vnc update stalls in case an unfinished vnc job gets
aborted. The vnc client will never receive the requested update then.
Fix that by copying the state from job_update back to update in that
case.
Reports complain about stalls with two or more clients being connected
at the same time, on some but not all connections. I suspect it can
also happen with a single connection, multiple connections only make
this more much likely to happen.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1662260
Reported-by: Ying Fang <fangying1@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ying Fang <fangying1@huawei.com>
Message-id: 20190305130930.24516-1-kraxel@redhat.com
This makes use of wide curses functions instead of 8bit functions. This
allows to type e.g. accented letters.
Unfortunately, key codes are then returned with values that could be
confused with wide characters by ncurses, so we need to add a maybe_keycode
variable to know whether the returned value is a key code or a character
(curses with wide support), or possibly both (curses without wide support).
The translation tables thus also need to be separated into key code
translation and character translation. The curses2foo helper makes it easier
to use them.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20190304210532.7840-1-samuel.thibault@ens-lyon.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
By default, curses will only report single ESC key event after 1s delay,
since ESC is also used for keypad escape sequences. This however makes
users believe that ESC is not working. Reducing to 25ms provides good user
experience, while still allowing 25ms for keypad sequences to get in, which
should be enough.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190303172557.17139-1-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The OSX Mojave release is more picky about enforcing the Cocoa API
restriction that only the main thread may perform UI calls. To
accommodate this we need to restructure the Cocoa code:
* the special OSX main() creates a second thread and uses
that to call the vl.c qemu_main(); the original main
thread goes into the OSX event loop
* the refresh, switch and update callbacks asynchronously
tell the main thread to do the necessary work
* the refresh callback no longer does the "get events from the
UI event queue and handle them" loop, since we now use
the stock OSX event loop. Instead our NSApplication sendEvent
method will either deal with them or pass them on to OSX
All these things have to be changed in one commit, to avoid
breaking bisection.
Note that since we use dispatch_get_main_queue(), this bumps
our minimum version requirement to OSX 10.10 Yosemite (released
in 2014, unsupported by Apple since 2017).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-8-peter.maydell@linaro.org
Message-id: 20190214102816.3393-8-peter.maydell@linaro.org
When we switch away from our custom event handling, we still want to
be able to have first go at any events our application receives,
because in full-screen mode we want to send key events to the guest,
even if they would be menu item activation events. There are several
ways we could do that, but one simple approach is to subclass
NSApplication so we can implement a custom sendEvent method.
Do that, but for the moment have our sendEvent just invoke the
superclass method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-7-peter.maydell@linaro.org
Message-id: 20190214102816.3393-7-peter.maydell@linaro.org
Currently the handleEvent method will directly call the NSApp
sendEvent method for any events that we want to let OSX deal
with. When we rearrange the event handling code, the way that
we say "let OSX have this event" is going to change. Prepare
for that by refactoring so that handleEvent returns a flag
indicating whether it consumed the event.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-6-peter.maydell@linaro.org
Message-id: 20190214102816.3393-6-peter.maydell@linaro.org
Move the console/device menu creation code functions
further up in the source file, next to the code which
creates the initial menus. We're going to want to
change the location we call these functions from in
the next patch.
This commit is a pure code move with no other changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-5-peter.maydell@linaro.org
Message-id: 20190214102816.3393-5-peter.maydell@linaro.org
Factor out the long code sequence in main() which creates
the initial set of menus. This will make later patches
which move initialization code around a bit clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-4-peter.maydell@linaro.org
Message-id: 20190214102816.3393-4-peter.maydell@linaro.org
Currently the switchSurface method takes a DisplaySurface. We want
to change our DisplayChangeListener's dpy_gfx_switch callback
to do this work asynchronously on a different thread. The caller
of the switch callback will free the old DisplaySurface
immediately the callback returns, so to ensure that the
other thread doesn't access freed data we need to switch
to using the underlying pixman image instead. The pixman
image is reference counted, so we will be able to take
a reference to it to avoid it vanishing too early.
In this commit we only change the switchSurface method
to take a pixman image, and keep the flow of control
synchronous for now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-3-peter.maydell@linaro.org
Message-id: 20190214102816.3393-3-peter.maydell@linaro.org
The Cocoa UI should run on the main thread; this is enforced
in OSX Mojave. In order to be able to run on the main thread,
we need to make sure we hold the iothread lock whenever we
call into various QEMU UI midlayer functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20190225102433.22401-2-peter.maydell@linaro.org
Message-id: 20190214102816.3393-2-peter.maydell@linaro.org
The 'qemu_acl' type was a previous non-QOM based attempt to provide an
authorization facility in QEMU. Because it is non-QOM based it cannot be
created via the command line and requires special monitor commands to
manipulate it.
The new QAuthZ subclasses provide a superset of the functionality in
qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor
commands are converted to use the new QAuthZSimple data type instead
in order to provide temporary backwards compatibility.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new display backend that will configure Spice to allow a remote
client to control QEMU in a similar fashion as other QEMU display
backend/UI like GTK.
For this to work, it will set up Spice server with a unix socket, and
register a VC chardev that will be exposed as Spice ports. A QMP
monitor is also exposed as a Spice port, this allows the remote client
fuller qemu control and state handling.
- doesn't handle VC set_echo() - this doesn't seem a strong
requirement, very few front-end use it
- spice options can be tweaked with other -spice arguments
- Windows support shouldn't be hard to do, but will probably use a TCP
port instead
- we may want to watch the child process to quit automatically if it
crashed
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-12-marcandre.lureau@redhat.com
[ kraxel: squash incremental fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If no -name is given, let's use a friendly "QEMU version" server
name. This is sometime exposed on spice client side, for example on
remote-viewer title.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-11-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
spice_server_vm_start/stop() was added to help migration state (commit
f5bb039c6d).
However, a paused VM could keep running the spice server. This will
allow a Spice client to keep sending commands to a spice chardev. This
allows to stop/cont a VM from a Spice monitor port. Character
devices (vdagent/usb/smartcard/..) should not read from Spice when the
VM is paused.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Passing several -spice options to qemu command line, or calling
several time qemu_opts_set() will ignore all but the first option
list. Since the spice server is a singleton, it makes sense to merge
all the options, the last value being the one taken into account.
This changes the behaviour from, for ex:
$ qemu... -spice port=5900 -spice port=5901 -> port: 5900
to:
$ qemu... -spice port=5900 -spice port=5901 -> port: 5901
(if necessary we could instead produce an error when an option is
given twice, although this makes handling default values and such more
complicated)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-5-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The Spice server doesn't like to be started or stopped twice . It
aborts with:
(process:6191): Spice-ERROR **: 19:29:35.912: red-worker.c:623:handle_dev_start: assertion `!worker->running' failed
It's easy to avoid that situation since qemu spice_display_is_running
tracks the server state.
After the commit "spice: do not stop spice if VM is paused", it will
be possible to pause and resume the VM, and this will call
qemu_spice_display_start() twice. The easiest is to add a check for
spice_display_is_running with this patch to avoid the assert.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The license information in this file is very messy. A short note at
the beginning says GPL first, but the long boilerplate code then
talks about "GNU Lesser General Public License version 2.0". First,
there is no such version of the "GNU Lesser GPL", it only started with
version 2.1. In version 2.0, it was still called "GNU Library GPL"
instead. Second, you can easily get the license of this file wrong
if you only quickly glance at the long boilerplate code.
Anyway, looking at the text of the LGPL (see COPYING.LIB in the top
directory), the license clearly states in section "3." that one should
rather replace the license information with the GPL information in
such a case of a mixture instead. Thus let's clean up the confusing
statements and use the proper GPL text only.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 1550731902-28842-1-git-send-email-thuth@redhat.com
[ kraxel: s/v2/v2+/ as requested by Daniel ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qkbd_state_key_event() does that for us.
Fixes: 07333e1ca3 kbd-state: use state tracker for sdl2
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190208072744.10687-1-kraxel@redhat.com
Calls the new SPICE QXL interface function spice_qxl_set_device_info to
set the hardware address of the graphics device represented by the QXL
interface (e.g. a PCI path) and the device display IDs (the IDs of the
device's monitors that belong to this QXL interface).
Also stops using the deprecated spice_qxl_set_max_monitors, the new
interface function replaces it.
Signed-off-by: Lukáš Hrázký <lhrazky@redhat.com>
Message-Id: <20190215150919.8263-1-lhrazky@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Having to include qapi-events.h just for QAPIEvent is suboptimal, but
quite tolerable now. It'll become problematic when we have events
conditional on the target, because then qapi-events.h won't be usable
from target-independent code anymore. Avoid that by generating it
into separate files.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-6-armbru@redhat.com>
It is possible that the modifier state on keyup is different from the
modifier state on keydown. In that case the keycode lookup can end up
with different keys in case multiple keysym -> keycode mappings exist,
because it picks the mapping depending on modifier state.
To fix that change the lookup logic for keyup events. Instead of
looking at the modifier state check the key state and prefer a keycodes
where the key is in "down" state right now.
Fixes: abb4f2c965 keymap: consider modifier state when picking a mapping
Buglink: https://bugs.launchpad.net/bugs/1738283
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1658676
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-9-kraxel@redhat.com
Pass the keyboard state tracker handle down to keysym2scancode(),
so the code can fully inspect the keyboard state as needed. No
functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-8-kraxel@redhat.com
Use the new keyboard state tracked for vnc. Allows to drop the
vnc-specific modifier state tracking code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-7-kraxel@redhat.com
Use the new keyboard state tracked for gtk. Allows to drop the
gtk-specific modifier state tracking code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-6-kraxel@redhat.com
Also: sdl2_process_key is never called with scon == NULL.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-5-kraxel@redhat.com
Use the new keyboard state tracked for sdl2. We can drop the modifier
state tracking from sdl2. Also keyup code is simpler, the state tracker
will take care to not send suspious keyup events to the guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-4-kraxel@redhat.com
Now that most user interfaces are using QKeyCodes it is easier to have
common keyboard code useable by all user interfaces.
This patch adds helper code to track the state of all keyboard keys,
using a bitmap indexed by QKeyCode. Modifier state is tracked too,
as separate bitmap. That makes checking modifier state easier.
Likewise we can easily apply special handling for capslock & numlock
(toggles on keypress) and ctrl + shift (we have two keys for that).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190122092814.14919-2-kraxel@redhat.com
[ kraxel: added license boilerplate header ]
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This would help gtk-egl display showing scaled DMABuf cursor images when
gtk window was zoomed. A default scale of (1.0, 1.0) was presumed for
call sites where no scaling is needed.
Signed-off-by: Chen Zhang <tgfbeta@me.com>
Message-id: 23B229B3-3095-4DFB-8369-866784808D30@me.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
macOS 10.14 deprecated NSOnState/NSOffState in favour of
NSControlStateValueOn/NSControlStateValueOff. Use the new constants,
and #define them to the old ones when compiling against a pre-10.13 SDK.
Also [NSGraphicsContext graphicsPort] is now deprecated, use
[NSGraphicsContext CGContext] when available.
Signed-off-by: Brendan Shanks <brendan@bslabs.net>
Message-id: 20190201071225.20576-1-brendan@bslabs.net
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
sdl_keysym.h has only been included by sdl.c which has recently been
removed recently with this commit:
0015ca5cba
("ui: remove support for SDL1.2 in favour of SDL2")
So we can drop this header file now completely, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 1549282241-23535-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann