Flat unions may now have uncovered branches, so it is possible to get rid
of empty types defined for that purpose only.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1529311206-76847-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The generated QEMU QMP reference is now structured as follows:
1.1 Introduction
1.2 Stability Considerations
1.3 Common data types
1.4 Socket data types
1.5 VM run state
1.6 Cryptography
1.7 Block devices
1.7.1 Block core (VM unrelated)
1.7.2 QAPI block definitions (vm unrelated)
1.8 Character devices
1.9 Net devices
1.10 Rocker switch device
1.11 TPM (trusted platform module) devices
1.12 Remote desktop
1.12.1 Spice
1.12.2 VNC
1.13 Input
1.14 Migration
1.15 Transactions
1.16 Tracing
1.17 QMP introspection
1.18 Miscellanea
Section "1.18 Miscellanea" is still too big: it documents 134 symbols.
Section "1.7.1 Block core (VM unrelated)" is also rather big: 128
symbols. All the others are of reasonable size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-17-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
We traditionally mark optional members #optional in the doc comment.
Before commit 3313b61, this was entirely manual.
Commit 3313b61 added some automation because its qapi2texi.py relied
on #optional to determine whether a member is optional. This is no
longer the case since the previous commit: the only thing qapi2texi.py
still does with #optional is stripping it out. We still reject bogus
qapi-schema.json and six places for qga/qapi-schema.json.
Thus, you can't actually rely on #optional to see whether something is
optional. Yet we still make people add it manually. That's just
busy-work.
Drop the code to check, fix up and strip out #optional, along with all
instances of #optional. To keep it out, add code to reject it, to be
dropped again once the dust settles.
No change to generated documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-18-git-send-email-armbru@redhat.com>
Add some more section titles to organize the documentation we're going
to generate.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-10-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Libgcrypt and nettle support 3des-ede, so this patch add 3des-ede
support when using libgcrypt or nettle.
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce CTR mode support for the cipher APIs.
CTR mode uses a counter rather than a traditional IV.
The counter has additional properties, including a nonce
and initial counter block. We reuse the ctx->iv as
the counter for conveniences.
Both libgcrypt and nettle are support CTR mode, the
cipher-builtin doesn't support yet.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
cryptsetup recently increased the default pbkdf2 time to 2 seconds
to partially mitigate improvements in hardware performance wrt
brute-forcing the pbkdf algorithm. This updates QEMU defaults to
match.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As protection against bruteforcing passphrases, the PBKDF
algorithm is tuned by counting the number of iterations
needed to produce 1 second of running time. If the machine
that the image will be used on is much faster than the
machine where the image is created, it can be desirable
to raise the number of iterations. This change adds a new
'iter-time' property that allows the user to choose the
iteration wallclock time.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When creating new block encryption volumes, we accept a list of
parameters to control the formatting process. It is useful to
be able to query what those parameters were for existing block
devices. Add a qcrypto_block_get_info() method which returns a
QCryptoBlockInfo instance to report this data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1469192015-16487-2-git-send-email-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Wire up the nettle and gcrypt hash backends so that they can
support the sha224, sha384, sha512 and ripemd160 hash algorithms.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Provide a block encryption implementation that follows the
LUKS/dm-crypt specification.
This supports all combinations of hash, cipher algorithm,
cipher mode and iv generator that are implemented by the
current crypto layer.
There is support for opening existing volumes formatted
by dm-crypt, and for formatting new volumes. In the latter
case it will only use key slot 0.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a generic framework for supporting different block encryption
formats. Upon instantiating a QCryptoBlock object, it will read
the encryption header and extract the encryption keys. It is
then possible to call methods to encrypt/decrypt data buffers.
There is also a mode whereby it will create/initialize a new
encryption header on a previously unformatted volume.
The initial framework comes with support for the legacy QCow
AES based encryption. This enables code in the QCow driver to
be consolidated later.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce 'XTS' as a permitted mode for the cipher APIs.
With XTS the key provided must be twice the size of the
key normally required for any given algorithm. This is
because the key will be split into two pieces for use
in XTS mode.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
New cipher algorithms 'twofish-128', 'twofish-192' and
'twofish-256' are defined for the Twofish algorithm.
The gcrypt backend does not support 'twofish-192'.
The nettle and gcrypt cipher backends are updated to
support the new cipher and a test vector added to the
cipher test suite. The new algorithm is enabled in the
LUKS block encryption driver.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
New cipher algorithms 'serpent-128', 'serpent-192' and
'serpent-256' are defined for the Serpent algorithm.
The nettle and gcrypt cipher backends are updated to
support the new cipher and a test vector added to the
cipher test suite. The new algorithm is enabled in the
LUKS block encryption driver.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A new cipher algorithm 'cast-5-128' is defined for the
Cast-5 algorithm with 128 bit key size. Smaller key sizes
are supported by Cast-5, but nothing in QEMU should use
them, so only 128 bit keys are permitted.
The nettle and gcrypt cipher backends are updated to
support the new cipher and a test vector added to the
cipher test suite. The new algorithm is enabled in the
LUKS block encryption driver.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are a number of different algorithms that can be used
to generate initialization vectors for disk encryption. This
introduces a simple internal QCryptoBlockIV object to provide
a consistent internal API to the different algorithms. The
initially implemented algorithms are 'plain', 'plain64' and
'essiv', each matching the same named algorithm provided
by the Linux kernel dm-crypt driver.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QCryptoCipherAlgorithm and QCryptoCipherMode enums are
defined in the crypto/cipher.h header. In the future some
QAPI types will want to reference the hash enums, so move
the enum definition into QAPI too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QCryptoHashAlgorithm enum is defined in the crypto/hash.h
header. In the future some QAPI types will want to reference
the hash enums, so move the enum definition into QAPI too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a new QCryptoSecret object class which will be used
for providing passwords and keys to other objects which need
sensitive credentials.
The new object can provide secret values directly as properties,
or indirectly via a file. The latter includes support for file
descriptor passing syntax on UNIX platforms. Ordinarily passing
secret values directly as properties is insecure, since they
are visible in process listings, or in log files showing the
CLI args / QMP commands. It is possible to use AES-256-CBC to
encrypt the secret values though, in which case all that is
visible is the ciphertext. For ad hoc developer testing though,
it is fine to provide the secrets directly without encryption
so this is not explicitly forbidden.
The anticipated scenario is that libvirtd will create a random
master key per QEMU instance (eg /var/run/libvirt/qemu/$VMNAME.key)
and will use that key to encrypt all passwords it provides to
QEMU via '-object secret,....'. This avoids the need for libvirt
(or other mgmt apps) to worry about file descriptor passing.
It also makes life easier for people who are scripting the
management of QEMU, for whom FD passing is significantly more
complex.
Providing data inline (insecure, only for ad hoc dev testing)
$QEMU -object secret,id=sec0,data=letmein
Providing data indirectly in raw format
printf "letmein" > mypasswd.txt
$QEMU -object secret,id=sec0,file=mypasswd.txt
Providing data indirectly in base64 format
$QEMU -object secret,id=sec0,file=mykey.b64,format=base64
Providing data with encryption
$QEMU -object secret,id=master0,file=mykey.b64,format=base64 \
-object secret,id=sec0,data=[base64 ciphertext],\
keyid=master0,iv=[base64 IV],format=base64
Note that 'format' here refers to the format of the ciphertext
data. The decrypted data must always be in raw byte format.
More examples are shown in the updated docs.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a QCryptoTLSCreds class to act as the base class for
storing TLS credentials. This will be later subclassed to provide
handling of anonymous and x509 credential types. The subclasses
will be user creatable objects, so instances can be created &
deleted via 'object-add' and 'object-del' QMP commands respectively,
or via the -object command line arg.
If the credentials cannot be initialized an error will be reported
as a QMP reply, or on stderr respectively.
The idea is to make it possible to represent and manage TLS
credentials independently of the network service that is using
them. This will enable multiple services to use the same set of
credentials and minimize code duplication. A later patch will
convert the current VNC server TLS code over to use this object.
The representation of credentials will be functionally equivalent
to that currently implemented in the VNC server with one exception.
The new code has the ability to (optionally) load a pre-generated
set of diffie-hellman parameters, if the file dh-params.pem exists,
whereas the current VNC server will always generate them on startup.
This is beneficial for admins who wish to avoid the (small) time
sink of generating DH parameters at startup and/or avoid depleting
entropy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Anton Nefedov