block/throttle.c uses existing I/O throttle infrastructure inside a
block filter driver. I/O operations are intercepted in the filter's
read/write coroutines, and referred to block/throttle-groups.c
The driver can be used with the syntax
-drive driver=throttle,file.filename=foo.qcow2,throttle-group=bar
which registers the throttle filter node with the ThrottleGroup 'bar'. The
given group must be created beforehand with object-add or -object.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ThrottleGroup is converted to an object. This will allow the future
throttle block filter drive easy creation and configuration of throttle
groups in QMP and cli.
A new QAPI struct, ThrottleLimits, is introduced to provide a shared
struct for all throttle configuration needs in QMP.
ThrottleGroups can be created via CLI as
-object throttle-group,id=foo,x-iops-total=100,x-..
where x-* are individual limit properties. Since we can't add non-scalar
properties in -object this interface must be used instead. However,
setting these properties must be disabled after initialization because
certain combinations of limits are forbidden and thus configuration
changes should be done in one transaction. The individual properties
will go away when support for non-scalar values in CLI is implemented
and thus are marked as experimental.
ThrottleGroup also has a `limits` property that uses the ThrottleLimits
struct. It can be used to create ThrottleGroups or set the
configuration in existing groups as follows:
{ "execute": "object-add",
"arguments": {
"qom-type": "throttle-group",
"id": "foo",
"props" : {
"limits": {
"iops-total": 100
}
}
}
}
{ "execute" : "qom-set",
"arguments" : {
"path" : "foo",
"property" : "limits",
"value" : {
"iops-total" : 99
}
}
}
This also means a group's configuration can be fetched with qom-get.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The lookup tables have a sentinel, no need to make callers pass their
size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rebased, commit message corrected]
The generated QEMU QMP reference is now structured as follows:
1.1 Introduction
1.2 Stability Considerations
1.3 Common data types
1.4 Socket data types
1.5 VM run state
1.6 Cryptography
1.7 Block devices
1.7.1 Block core (VM unrelated)
1.7.2 QAPI block definitions (vm unrelated)
1.8 Character devices
1.9 Net devices
1.10 Rocker switch device
1.11 TPM (trusted platform module) devices
1.12 Remote desktop
1.12.1 Spice
1.12.2 VNC
1.13 Input
1.14 Migration
1.15 Transactions
1.16 Tracing
1.17 QMP introspection
1.18 Miscellanea
Section "1.18 Miscellanea" is still too big: it documents 134 symbols.
Section "1.7.1 Block core (VM unrelated)" is also rather big: 128
symbols. All the others are of reasonable size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-17-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
query-version and query-commands are in common.json for no good
reason. Several similar queries are in qapi-schema.json. Move them
there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-16-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Except for block-core.json, the sub-schemas are self-contained: if
they use a symbol defined in another sub-schema, they include that
sub-schema. To check, feed the sub-schema to qapi2texi (or any other
QAPI generator) along with the pragma from qapi-schema.json.
Fix up things to make block-core.json self-contained, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-15-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Sadly, we don't have a TPM maintainer, not even a MAINTAINERS entry.
Create one, and mark it orphaned.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-12-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-10-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-8-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Bug: introspection documentation is in section "Tracing commands".
Cause: sub-schema qapi/introspect.json lacks a section header, and
therefore goes into whatever section precedes its include.
Fix: add a section header.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1503602048-12268-3-git-send-email-armbru@redhat.com>
With the move of some docs to docs/interop on ac06724a71,
a couple of references were not updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commits 0db832f and 6cdbceb introduced the automatic insertion of filter
nodes above the top layer of mirror and commit block jobs. The
assumption made there was that since libvirt doesn't do node-level
management of the block layer yet, it shouldn't be affected by added
nodes.
This is true as far as commands issued by libvirt are concerned. It only
uses BlockBackend names to address nodes, so any operations it performs
still operate on the root of the tree as intended.
However, the assumption breaks down when you consider query commands,
which return data for the wrong node now. These commands also return
information on some child nodes (bs->file and/or bs->backing), which
libvirt does make use of, and which refer to the wrong nodes, too.
One of the consequences is that oVirt gets wrong information about the
image size and stops the VM in response as long as a mirror or commit
job is running:
https://bugzilla.redhat.com/show_bug.cgi?id=1470634
This patch fixes the problem by hiding the implicit nodes created
automatically by the mirror and commit block jobs in the output of
query-block and BlockBackend-based query-blockstats as long as the user
doesn't indicate that they are aware of those nodes by providing a node
name for them in the QMP command to start the block job.
The node-based commands query-named-block-nodes and query-blockstats
with query-nodes=true still show all nodes, including implicit ones.
This ensures that users that are capable of node-level management can
still access the full information; users that only know BlockBackends
won't use these commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
BlockdevRef is an alternate of BlockdevOptions (inline definition) and
str (reference to an existing block device by name). BlockdevRef
value "" is special: "no block device should be referenced." It's
actually interpreted that way in just one place: optional member
@backing of COW formats. Semantics:
* Present means "use this block device" as backing storage
* Absent means "default to the one stored in the image"
* Except "" means "don't use backing storage at all"
The first two are perfectly normal: when the parameter is absent, it
defaults to an implied value, but the value's meaning is the same.
The third one overloads the parameter with a second meaning. The
overloading is *implicit*, i.e. it's not visible in the types. Works
here, because "" is not a value block device ID.
Pressing argument values the schema accepts, but are semantically
invalid, into service to mean "do something else entirely" is not
general, as suitable invalid values need not exist. I also find it
ugly.
To clean this up, we could add a separate flag argument to suppress
@backing, or add a distinct value to @backing. This commit implements
the latter: add JSON null to the values of @backing, deprecate "".
Because we're so close to the 2.10 freeze, implement it in the
stupidest way possible: have qmp_blockdev_add() rewrite null to ""
before anything else can see the null. Works, because BlockdevRef
occurs only within arguments of blockdev-add. The proper way to do it
would be rewriting "" to null, preferably in a cleaner way, but that
requires fixing up code to work with null. Add a TODO comment for
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Make visit_type_null() take an @obj argument like its buddies. This
helps keep the next commit simple.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
With -blockdev/-device, users can indirectly create anonymous
BlockBackends, while the state of such backends is still of interest. As
a preparation for making such BBs visible in query-block, make sure that
they can be identified even without a name by adding the ID/QOM path of
their qdev device to BlockInfo.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
bdrv_measure() provides a conservative maximum for the size of a new
image. This information is handy if storage needs to be allocated (e.g.
a SAN or an LVM volume) ahead of time.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-2-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Remove persistent bitmap from the storage on block-dirty-bitmap-remove.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-30-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Optional. Default is false.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-25-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add optional 'persistent' flag to qmp command block-dirty-bitmap-add.
Default is false.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-24-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that all encryption keys must be provided upfront via
the QCryptoSecret API and associated block driver properties
there is no need for any explicit encryption handling APIs
in the block layer. Encryption can be handled transparently
within the block driver. We only retain an API for querying
whether an image is encrypted or not, since that is a
potentially useful piece of metadata to report to the user.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-18-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds support for using LUKS as an encryption format
with the qcow2 file, using the new encrypt.format parameter
to request "luks" format. e.g.
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encrypt.format=luks,encrypt.key-secret=sec0 \
test.qcow2 10G
The legacy "encryption=on" parameter still results in
creation of the old qcow2 AES format (and is equivalent
to the new 'encryption-format=aes'). e.g. the following are
equivalent:
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption=on,encrypt.key-secret=sec0 \
test.qcow2 10G
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption-format=aes,encrypt.key-secret=sec0 \
test.qcow2 10G
With the LUKS format it is necessary to store the LUKS
partition header and key material in the QCow2 file. This
data can be many MB in size, so cannot go into the QCow2
header region directly. Thus the spec defines a FDE
(Full Disk Encryption) header extension that specifies
the offset of a set of clusters to hold the FDE headers,
as well as the length of that region. The LUKS header is
thus stored in these extra allocated clusters before the
main image payload.
Aside from all the cryptographic differences implied by
use of the LUKS format, there is one further key difference
between the use of legacy AES and LUKS encryption in qcow2.
For LUKS, the initialiazation vectors are generated using
the host physical sector as the input, rather than the
guest virtual sector. This guarantees unique initialization
vectors for all sectors when qcow2 internal snapshots are
used, thus giving stronger protection against watermarking
attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-14-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This converts the qcow2 driver to make use of the QCryptoBlock
APIs for encrypting image content, using the legacy QCow2 AES
scheme.
With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.
$QEMU \
-object secret,id=sec0,file=/home/berrange/encrypted.pw \
-drive file=/home/berrange/encrypted.qcow2,encrypt.key-secret=sec0
The test 087 could be simplified since there is no longer a
difference in behaviour when using blockdev_add with encrypted
images for the running vs stopped CPU state.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-12-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This converts the qcow driver to make use of the QCryptoBlock
APIs for encrypting image content. This is only wired up to
permit use of the legacy QCow encryption format. Users who wish
to have the strong LUKS format should switch to qcow2 instead.
With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.
$QEMU \
-object secret,id=sec0,file=/home/berrange/encrypted.pw \
-drive file=/home/berrange/encrypted.qcow,encrypt.format=aes,\
encrypt.key-secret=sec0
Though note that running QEMU system emulators with the AES
encryption is no longer supported, so while the above syntax
is valid, QEMU will refuse to actually run the VM in this
particular example.
Likewise when creating images with the legacy AES-CBC format
qemu-img create -f qcow \
--object secret,id=sec0,file=/home/berrange/encrypted.pw \
-o encrypt.format=aes,encrypt.key-secret=sec0 \
/home/berrange/encrypted.qcow 64M
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-10-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This may be used for deprecated object properties that are kept for
backwards compatibility.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Switch to use QNum/uint where appropriate to remove i64 limitation.
The input visitor will cast i64 input to u64 for compatibility
reasons (existing json QMP client already use negative i64 for large
u64, and expect an implicit cast in qemu).
Note: before the patch, uint64_t values above INT64_MAX are sent over
json QMP as negative values, e.g. UINT64_MAX is sent as -1. After the
patch, they are sent unmodified. Clearly a bug fix, but we have to
consider compatibility issues anyway. libvirt should cope fine,
because its parsing of unsigned integers accepts negative values
modulo 2^64. There's hope that other clients will, too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-12-marcandre.lureau@redhat.com>
[check_native_list() tweaked for consistency with signed case]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Before the previous commit, parameter promote_int = true made
visit_start_alternate() with an input visitor avoid QTYPE_QINT
variants and create QTYPE_QFLOAT variants instead. This was used
where QTYPE_QINT variants were invalid.
The previous commit fused QTYPE_QINT with QTYPE_QFLOAT, rendering
promote_int useless and unused.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-8-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use the more common pattern to error out.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-6-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Say "SCSI except scsi-generic" instead of "scsi-disk", because
scsi-disk could mean either scsi-disk.c (which is correct) or device
model scsi-disk (which would be incorrect).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1494327362-30727-2-git-send-email-armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
In the process of getting rid of docs/qmp-commands.txt, we managed
to regress on some of the text that changed after the point where
the move was first branched and when the move actually occurred.
For example, commit 3282eca for blockdev-snapshot re-added the
extra "options" layer which had been cleaned up in commit 0153d2f.
This clears up all regressions identified over the range
02b351d..bd6092e:
https://lists.gnu.org/archive/html/qemu-devel/2017-05/msg05127.html
as well as a cleanup to x-blockdev-remove-medium to prefer
'id' over 'device' (matching the cleanup for 'eject').
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The QObject input visitor can produce only finite numbers when its
input comes out of the JSON parser, because the the JSON parser
implements RFC 7159, which provides no syntax for infinity and NaN.
However, it can produce infinity and NaN when its input comes out of
keyval_parse(), because we parse with strtod() then.
The keyval variant should not be able to express things the JSON
variant can't. Rejecting non-finite numbers there is the conservative
fix. It's also minimally invasive.
We could instead extend our JSON dialect to provide for infinity and
NaN. Not today.
Note that the JSON formatter can emit non-finite numbers (marked FIXME
in commit 6e8e5cb).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1495471335-23707-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Libvirt would like to be able to distinguish between a SHUTDOWN
event triggered solely by guest request and one triggered by a
SIGTERM or other action on the host. While qemu_kill_report() was
already able to give different output to stderr based on whether a
shutdown was triggered by a host signal (but NOT by a host UI event,
such as clicking the X on the window), that information was then
lost to management. The previous patches improved things to use an
enum throughout all callsites, so now we have something ready to
expose through QMP.
Note that for now, the decision was to expose ONLY a boolean,
rather than promoting ShutdownCause to a QAPI enum; this is because
libvirt has not expressed an interest in anything finer-grained.
We can still add additional details, in a backwards-compatible
manner, if a need later arises (if the addition happens before 2.10,
we can replace the bool with an enum; otherwise, the enum will have
to be in addition to the bool); this patch merely adds a helper
shutdown_caused_by_guest() to map the internal enum into the
external boolean.
Update expected iotest outputs to match the new data (complete
coverage of the affected tests is obtained by -raw, -qcow2, and -nbd).
Here is output from 'virsh qemu-monitor-event --loop' with the
patch installed:
event SHUTDOWN at 1492639680.731251 for domain fedora_13: {"guest":true}
event STOP at 1492639680.732116 for domain fedora_13: <null>
event SHUTDOWN at 1492639680.732830 for domain fedora_13: {"guest":false}
Note that libvirt runs qemu with -no-shutdown: the first SHUTDOWN event
was triggered by an action I took directly in the guest (shutdown -h),
at which point qemu stops the vcpus and waits for libvirt to do any
final cleanups; the second SHUTDOWN event is the result of libvirt
sending SIGTERM now that it has completed cleanup. Libvirt is already
smart enough to only feed the first qemu SHUTDOWN event to the end user
(remember, virsh qemu-monitor-event is a low-level debugging interface
that is explicitly unsupported by libvirt, so it sees things that normal
end users do not); changing qemu to emit SHUTDOWN only once is outside
the scope of this series.
See also https://bugzilla.redhat.com/1384007
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515214114.15442-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wJvl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'dgilbert/tags/pull-hmp-20170517' into staging
HMP pull
# gpg: Signature made Wed 17 May 2017 07:03:39 PM BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* dgilbert/tags/pull-hmp-20170517:
ramblock: add new hmp command "info ramblock"
utils: provide size_to_str()
ramblock: add RAMBLOCK_FOREACH()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Manos Pitsidianakis