This change checks elf_flags for EF_RISCV_RVE and if
present uses the RVE linux syscall ABI which uses t0
for the syscall number instead of a7.
Warn and exit if a non-RVE ABI binary is run on a
cpu with the RVE extension as it is incompatible.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Co-authored-by: Kito Cheng <kito.cheng@gmail.com>
Co-authored-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We can't allow the supervisor to control SEIP as this would allow the
supervisor to clear a pending external interrupt which will result in
lost a interrupt in the case a PLIC is attached. The SEIP bit must be
hardware controlled when a PLIC is attached.
This logic was previously hard-coded so SEIP was always masked even
if no PLIC was attached. This patch adds riscv_cpu_claim_interrupts
so that the PLIC can register control of SEIP. In the case of models
without a PLIC (spike), the SEIP bit remains software controlled.
This interface allows for hardware control of supervisor timer and
software interrupts by other interrupt controller models.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The gdb CSR xml file has registers in documentation order, not numerical
order, so we need a table to map the register numbers. This also adds
fairly standard gdb hooks to access xml specified registers.
notice:
The fpu xml from gdb 8.3 has unused register #, 65 and make first
csr register # become 69. We register extra register on gdb to correct
csr offset calculation
Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add a debugger field to CPURISCVState. Add riscv_csrrw_debug function
to set it. Disable mode checks when debugger field true.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190212230903.9215-1-jimw@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This adds some missing CSR_* register macros, and documents some as being
priv v1.9.1 specific.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190212230830.9160-1-jimw@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
during the refactor to decodetree we removed the manual decoding that is
necessary for c.jal/c.addiw and removed the translation of c.flw/c.ld
and c.fsw/c.sd. This reintroduces the manual parsing and the
omited implementation.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
decodetree handles all instructions now so the fallback is not necessary
anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
with all 16 bit insns moved to decodetree no path is falling back to
gen_system(), so we can remove it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
manual decoding in gen_arith() is not necessary with decodetree. For now
the function is called trans_arith as the original gen_arith still
exists. The former will be renamed to gen_arith as soon as the old
gen_arith can be removed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
gen_arith_imm() does a lot of decoding manually, which was hard to read
in case of the shift instructions and is not necessary anymore with
decodetree.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
With decodetree we don't need to convert RISC-V opcodes into to MemOps
as the old gen_store() did.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
With decodetree we don't need to convert RISC-V opcodes into to MemOps
as the old gen_load() did.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
We now utilizes argument-sets of decodetree such that no manual
decoding is necessary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
trans_jalr() is the only caller, so move the code into trans_jalr().
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
we cannot remove the call to gen_arith() in decode_RV32_64G() since it
is used to translate multiply instructions.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
this splits the 64-bit only instructions into its own decode file such
that we generate the decoder for these instructions only for the RISC-V
64 bit target.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
for now only LUI & AUIPC are decoded and translated. If decodetree fails, we
fall back to the old decoder.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de>
Access to a counter in U-mode is permitted only if the corresponding
bit is set in both mcounteren and scounteren. The current code
ignores mcounteren and checks scounteren only for U-mode access.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch adds support for writing misa. misa is validated based
on rules in the ISA specification. 'E' is mutually exclusive with
all other extensions. 'D' depends on 'F' so 'D' bit is dropped
if 'F' is not present. A conservative approach to consistency is
taken by flushing the translation cache on misa writes. misa_mask
is added to the CPU struct to store the original set of extensions.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add misa checks for M, A, F and D extensions and if they are
not present generate illegal instructions. This improves
emulation accurary for harts with a limited set of extensions.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
gen methods should access state from DisasContext. Add misa
field to the DisasContext struct and remove CPURISCVState
argument from all gen methods.
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The gen methods should access state from DisasContext. Add priv_ver
field to the DisasContext struct.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
* Add riscv prefix to raise_exception function
* Add riscv prefix to CSR read/write functions
* Add riscv prefix to signal handler function
* Add riscv prefix to get fflags function
* Remove redundant declaration of riscv_cpu_init
and rename cpu_riscv_init to riscv_cpu_init
* rename riscv_set_mode to riscv_cpu_set_mode
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This adds the necessary minimum to support S-mode
virtualization for priv ISA >= v1.10
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Co-authored-by: Matthew Suozzo <msuozzo@google.com>
Co-authored-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Modifed from Richard Henderson's patch [1] to integrate
with the new control and status register implementation.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2018-03/msg07034.html
Note: the f* CSRs already mark mstatus.FS dirty using
env->mstatus |= mstatus.FS so the bug in the first
spin of this patch has been fixed in a prior commit.
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Co-authored-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
CSR predicate functions are added to the CSR table.
mstatus.FS and counter enable checks are moved
to predicate functions and two new predicates are
added to check misa.S for s* CSRs and a new PMP
CPU feature for pmp* CSRs.
Processors that don't implement S-mode will trap
on access to s* CSRs and processors that don't
implement PMP will trap on accesses to pmp* CSRs.
PMP checks are disabled in riscv_cpu_handle_mmu_fault
when the PMP CPU feature is not present.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use the new CSR read/modify/write interface to implement
atomic updates to mip/sip.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Previous CSR code uses csr_read_helper and csr_write_helper
to update CSR registers however this interface prevents
atomic read/modify/write CSR operations; in addition
there is no trap-free method to access to CSRs due
to the monolithic CSR functions call longjmp.
The current iCSR interface is not safe to be called by
target/riscv/gdbstub.c as privilege checks or missing CSRs
may call longjmp to generate exceptions. It needs to
indicate existence so traps can be generated in the
CSR instruction helpers.
This commit moves CSR access from the monolithic switch
statements in target/riscv/op_helper.c into modular
read/write functions in target/riscv/csr.c using a new
function pointer table for dispatch (which can later
be used to allow CPUs to hook up model specific CSRs).
A read/modify/write interface is added to support atomic
CSR operations and a non-trapping interface is added
to allow exception-free access to CSRs by the debugger.
The CSR functions and CSR dispatch table are ordered
to match The RISC-V Instruction Set Manual, Volume II:
Privileged Architecture Version 1.10, 2.2 CSR Listing.
An API is added to allow derived cpu instances to modify
or implement new CSR operations.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This pull request contains the first set of RISC-V patches I'd like to
target for the 3.2 development cycle. It's really just a collection of
bug fixes with one major new feature: PCIe can now be attached to RISC-V
guests.
This has passed my usual test of booting the latest Linux RC into a
Fedora disk image on the virt machine.
-----BEGIN PGP SIGNATURE-----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=BAOm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-3.2-part1' into staging
RISC-V Changes for 3.2, Part 1
This pull request contains the first set of RISC-V patches I'd like to
target for the 3.2 development cycle. It's really just a collection of
bug fixes with one major new feature: PCIe can now be attached to RISC-V
guests.
This has passed my usual test of booting the latest Linux RC into a
Fedora disk image on the virt machine.
# gpg: Signature made Fri 21 Dec 2018 16:01:29 GMT
# gpg: using RSA key EF4CA1502CCBAB41
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>"
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-3.2-part1:
MAINTAINERS: Mark RISC-V as Supported
riscv/cpu: use device_class_set_parent_realize
target/riscv/pmp.c: Fix pmp_decode_napot()
sifive_uart: Implement interrupt pending register
RISC-V: Enable second UART on sifive_e and sifive_u
RISC-V: Fix PLIC pending bitfield reads
RISC-V: Fix CLINT timecmp low 32-bit writes
RISC-V: Add hartid and \n to interrupt logging
sifive_u: Set 'clock-frequency' DT property for SiFive UART
sifive_u: Add clock DT node for GEM ethernet
riscv: Enable VGA and PCIE_VGA
hw/riscv/virt: Connect the gpex PCIe
hw/riscv/virt: Adjust memory layout spacing
hw/riscv/virt: Increase the number of interrupts
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kito Cheng