This patch adds support for a usb-redir device, which takes a chardev
as a communication channel to an actual usbdevice using the usbredir protocol.
Compiling the usb-redir device requires usbredir-0.3 to be installed for
the usbredir protocol parser, usbredir-0.3 also contains a server for
redirecting usb traffic from an actual usb device. You can get the 0.3
release of usbredir here:
http://people.fedoraproject.org/~jwrdegoede/usbredir-0.3.tar.bz2
(getting a more formal site for it is a WIP)
Example usage:
1) Start usbredirserver for a usb device:
sudo usbredirserver 045e:0772
2) Start qemu with usb2 support + a chardev talking to usbredirserver +
a usb-redir device using this chardev:
qemu ... \
-readconfig docs/ich9-ehci-uhci.cfg \
-chardev socket,id=usbredirchardev,host=localhost,port=4000 \
-device usb-redir,chardev=usbredirchardev,id=usbredirdev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
"next" is reserved in systemtap thus using this as a
trace parameter name causes trouble when trying to trace
with systemtap.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spec on UHCI_STS_USBERR: "If the TD on which the error interrupt
occurred also had its IOC bit set, both this bit and Bit 0 are set."
Make UHCI emulation do that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove leftover calls to usb_hid_changed().
Take care to update the changed flag after delivering a event via
GET_REPORT like we do when sending events via interrupt endpoint.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch implements MMU faults caused by TTE.NFO and TTE.E:
- access other than nonfaulting load to a page marked NFO should
raise data_access_exception
- nonfaulting load to a page marked with E bit should raise
data_access_exception
To distinguish nonfaulting loads, this patch extends (abuses?) the rw
argument of get_physical_address_data(). rw is set to 4 on nonfaulting
loads.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Nonfaulting loads should raise fast_data_access_MMU_miss traps as
normal loads do. It is up to the guest OS kernel that detect MMU misses
on nonfaulting load instructions and make them complete without signaling.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
cpu_get_phys_page_nofault() calls get_physical_address() twice,
that results in overwriting the fault status in the SFSR.
We need this change in order for nonfaulting loads to raising MMU faults
as normal loads do.
Also removed the call to cpu_get_physical_page_desc() since we are
going to modify nonfaulting loads raising MMU faults.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch makes cpu_get_phys_page_debug() independent from
cpu_get_phys_page_nofault() in advance of implementing nonfaulting load.
This also modifies cpu_get_phys_page_nofault() to be compiled only on
TARGET_SPARC64 because it is not required on SPARC32.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce cpu_sparc_get_phys_page() to be used as a help for splitting
cpu_get_phys_page_debug() from cpu_get_phys_page_nofault().
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add macros for SFSR fields and use macros instead of magic numbers.
Also fix the update of the register fields on MMU faults.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add macros for TTE bits and modify to use macros instead of
magic numbers.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is the actual guest daemon, it listens for requests over a
virtio-serial/isa-serial/unix socket channel and routes them through
to dispatch routines, and writes the results back to the channel in
a manner similar to QMP.
A shorthand invocation:
qemu-ga -d
Is equivalent to:
qemu-ga -m virtio-serial -p /dev/virtio-ports/org.qemu.guest_agent.0 \
-f /var/run/qemu-ga.pid -d
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Missing from previous addition of error to qerror.h. Needed for
qerror_format() and friends.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
This is how QMP commands/parameters/types would be defined. We use a
subset of that functionality here to implement functions/types for unit
testing.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
This is the code generator for qapi command marshaling/dispatch.
Currently only generators for synchronous qapi/qmp functions are
supported. This script generates the following files:
$(prefix)qmp-marshal.c: command marshal/dispatch functions for each
QMP command defined in the schema. Functions
generated by qapi-visit.py are used to
convert qobjects recieved from the wire into
function parameters, and uses the same
visiter functions to convert native C return
values to qobjects from transmission back
over the wire.
$(prefix)qmp-commands.h: Function prototypes for the QMP commands
specified in the schema.
$(prefix) is used in the same manner as with qapi-types.py
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
This is the code generator for qapi visiter functions used to
marshal/unmarshal/dealloc qapi types. It generates the following 2
files:
$(prefix)qapi-visit.c: visiter function for a particular c type, used
to automagically convert qobjects into the
corresponding C type and vice-versa, and well
as for deallocation memory for an existing C
type
$(prefix)qapi-visit.h: declarations for previously mentioned visiter
functions
$(prefix) is used as decribed for qapi-types.py
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
This is the code generator for qapi types. It will generation the
following files:
$(prefix)qapi-types.h - C types corresponding to types defined in
the schema you pass in
$(prefix)qapi-types.c - Cleanup functions for the above C types
The $(prefix) is used to as a namespace to keep the generated code from
one schema/code-generation separated from others so code and be
generated from multiple schemas with clobbering previously created code.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
We need this to parse dictionaries with schema ordering intact so that C
prototypes can be generated deterministically.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Given an object recieved via QMP, this code uses the dispatch table
provided by qmp_registry.c to call the corresponding marshalling/dispatch
function and format return values/errors for delivery to the QMP.
Currently only synchronous QMP functions are supported, but this will
also be used for async QMP functions and QMP guest proxy dispatch as
well.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Registration/lookup functions for that provide a lookup table for
dispatching QMP commands.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Type of Visitor class that can be passed into a qapi-generated C
type's visitor function to free() any heap-allocated data types.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Type of Visiter class that serves as the inverse of the input visitor:
it takes a series of native C types and uses their values to construct a
corresponding QObject. The command marshaling/dispatcher functions will
use this to convert the output of QMP functions into a QObject that can
be sent over the wire.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
A type of Visiter class that is used to walk a qobject's
structure and assign each entry to the corresponding native C type.
Command marshaling function will use this to pull out QMP command
parameters recieved over the wire and pass them as native arguments
to the corresponding C functions.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Base definitions/includes for Visiter interface used by generated
visiter/marshalling code.
Includes a GenericList type. Our lists require an embedded element.
Since these types are generated, if you want to use them in a different
type of data structure, there's no easy way to add another embedded
element. The solution is to have non-embedded lists and that what this is.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
GLib is an extremely common library that has a portable thread implementation
along with tons of other goodies.
GLib and GObject have a fantastic amount of infrastructure we can leverage in
QEMU including an object oriented programming infrastructure.
Short term, it has a very nice thread pool implementation that we could leverage
in something like virtio-9p. It also has a test harness implementation that
this series will use.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Commit e4ea5e2d0e added the use of
the macro GCC_FMT_ATTR to error.h, however compiler.h is not
included by error.h
This will cause a build error when files including error.h
don't include qemu-common.h (or compiler.h). Not an issue today
because the only file including it is json-parser.h and it does
include qemu-common.h, but let's get it fixed.
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
This moves compiler related macros from qemu-common.h to compiler.h.
The reason for this change is that there are simple header files that
depend only on the compiler macros, so including qemu-common.h is overkill.
Besides, qemu-common.h is bloated and will benefit from some splitting.
Please, also note that the QEMU_BUILD_BUG_ON() macro is being fixed to
not use double underscores as a prefix and the license text was added
by Vassili Karpov (malc), who is one of the authors of the new file.
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Add QMP bits for snapshot_blkdev command. This is the same as
snapshot_blkdev in the human monitor. The command is synchronous.
In the future async commands and or a break down of the functionality
into multiple commands might be added.
Also change the 'snapshot_file' argument to 'snapshot-file' in
the human monitor, so that it matches QMP.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
cea5f9a28f exposed bugs in unassigned memory
access handling. Fix them by always passing CPUState to the handlers.
Reported-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't compile virtio.c in hwlib, it depends on memory accesses
performed in CPU endianness.
Make loads and stores in CPU endianness unavailable to devices
and poison them to avoid further bugs.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
UA2007 ASI_BLK_* should be added in is_translating_asi().
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
cppcheck reports an error:
qemu/tcg/mips/tcg-target.c:1487: error: Invalid number of character (()
The unpatched code won't compile on mips hosts starting with commit
cea5f9a28f.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Anthony Liguori