cpu_ppc_set_papr() sets up various aspects of CPU state for use with PAPR
paravirtualized guests. However, it doesn't set the virtual hypervisor,
so callers must also call cpu_ppc_set_vhyp() so that PAPR hypercalls are
handled properly. This is a bit silly, so fold setting the virtual
hypervisor into cpu_ppc_set_papr().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
* Standardize on 'ptex' instead of 'pte_index' for HPTE index variables
for consistency and brevity
* Avoid variables named 'index'; shadowing index(3) from libc can lead to
surprising bugs if the variable is removed, because compiler errors
might not appear for remaining references
* Clarify index calculations in h_enter() - we have two cases, H_EXACT
where the exact HPTE slot is given, and !H_EXACT where we search for
an empty slot within the hash bucket. Make the calculation more
consistent between the cases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Some systems can already provide more than 255 hardware threads.
Bumping the QEMU limit to 1024 seems reasonable:
- it has no visible overhead in top;
- the limit itself has no effect on hot paths.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When DT node names for PCI devices are generated by SLOF,
they are generated according to the type of the device
(for instance, ethernet for virtio-net-pci device).
Node name for hotplugged devices is generated by QEMU.
This patch adds the mechanic to QEMU to create the node
name according to the device type too.
The data structure has been roughly copied from OpenBIOS/OpenHackware,
node names from SLOF.
Example:
Hotplugging some PCI cards with QEMU monitor:
device_add virtio-tablet-pci
device_add virtio-serial-pci
device_add virtio-mouse-pci
device_add virtio-scsi-pci
device_add virtio-gpu-pci
device_add ne2k_pci
device_add nec-usb-xhci
device_add intel-hda
What we can see in linux device tree:
for dir in /proc/device-tree/pci@800000020000000/*@*/; do
echo $dir
cat $dir/name
echo
done
WITHOUT this patch:
/proc/device-tree/pci@800000020000000/pci@0/
pci
/proc/device-tree/pci@800000020000000/pci@1/
pci
/proc/device-tree/pci@800000020000000/pci@2/
pci
/proc/device-tree/pci@800000020000000/pci@3/
pci
/proc/device-tree/pci@800000020000000/pci@4/
pci
/proc/device-tree/pci@800000020000000/pci@5/
pci
/proc/device-tree/pci@800000020000000/pci@6/
pci
/proc/device-tree/pci@800000020000000/pci@7/
pci
WITH this patch:
/proc/device-tree/pci@800000020000000/communication-controller@1/
communication-controller
/proc/device-tree/pci@800000020000000/display@4/
display
/proc/device-tree/pci@800000020000000/ethernet@5/
ethernet
/proc/device-tree/pci@800000020000000/input-controller@0/
input-controller
/proc/device-tree/pci@800000020000000/mouse@2/
mouse
/proc/device-tree/pci@800000020000000/multimedia-device@7/
multimedia-device
/proc/device-tree/pci@800000020000000/scsi@3/
scsi
/proc/device-tree/pci@800000020000000/usb-xhci@6/
usb-xhci
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
for building a s390-netboot.img) can be found at
http://wiki.qemu-project.org/Features/S390xNetworkBoot
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nH9Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170228' into staging
Network boot for s390x. More information (and instructions
for building a s390-netboot.img) can be found at
http://wiki.qemu-project.org/Features/S390xNetworkBoot
# gpg: Signature made Tue 28 Feb 2017 11:27:18 GMT
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20170228:
pc-bios/s390-ccw.img: rebuild image
pc-bios/s390-ccw: Use the ccw bios to start the network boot
s390x/ipl: Load network boot image
s390x/ipl: Extend S390IPLState to support network boot
elf-loader: Allow late loading of elf
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By default, don't allow another writer for block devices that are
attached to a guest device. For the cases where this setup is intended
(e.g. using a cluster filesystem on the disk), the new option can be
used to allow it.
This change affects only devices using DEFINE_BLOCK_PROPERTIES().
Devices directly using DEFINE_PROP_DRIVE() still accept writers
unconditionally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
This makes all device emulations with a qdev drive property request
permissions on their BlockBackend. The only thing we block at this point
is resizing images for some devices that can't support it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Some devices allow a media change between read-only and read-write
media. They need to adapt the permissions in their .change_media_cb()
implementation, which can fail. So add an Error parameter to the
function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Now that blk_insert_bs() requests the BlockBackend permissions for the
node it attaches to, it can fail. Instead of aborting, pass the errors
to the callers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
We want every user to be specific about the permissions it needs, so
we'll pass the initial permissions as parameters to blk_new(). A user
only needs to call blk_set_perm() if it wants to change the permissions
after the fact.
The permissions are stored in the BlockBackend and applied whenever a
BlockDriverState should be attached in blk_insert_bs().
This does not include actually choosing the right set of permissions
everywhere yet. Instead, the usual FIXME comment is added to each place
and will be addressed in individual patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
- a fix to a minor bug reported by Coverity
- throttling support in the local backend (command line only)
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAli1Q64ACgkQAvw66wEB28I5yQCePbLPSOtHO4LJGc2E973L7vH2
hQIAnReLFevyNN6BpivucP2/0YmAIKSi
=uTYd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
This pull request brings:
- a fix to a minor bug reported by Coverity
- throttling support in the local backend (command line only)
# gpg: Signature made Tue 28 Feb 2017 09:32:30 GMT
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "[jpeg image of size 3330]"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
throttle: factor out duplicate code
fsdev: add IO throttle support to fsdev devices
9pfs: fix v9fs_lock error case
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the bcm2835_sdhost and bcm2835_gpio to the BCM2835 platform.
For supporting the SD controller selection (alternate function of GPIOs
48-53), the bcm2835_gpio now exposes an sdbus.
It also has a link to both the sdbus of sdhci and sdhost controllers,
and the card is reparented from one bus to another when the alternate
function of GPIOs 48-53 is modified.
Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1488293711-14195-5-git-send-email-peter.maydell@linaro.org
Message-id: 20170224164021.9066-5-clement.deschamps@antfield.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the BCM2835 GPIO controller.
It currently implements:
- The 54 GPIOs as outputs (qemu_irq)
- The SD controller selection via alternate function of GPIOs 48-53
Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1488293711-14195-4-git-send-email-peter.maydell@linaro.org
Message-id: 20170224164021.9066-4-clement.deschamps@antfield.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a new function sdbus_reparent_card() in sd core for reparenting
a card from a SDBus to another one.
This function is required by the raspi platform, where the two SD
controllers can be dynamically switched.
Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1488293711-14195-3-git-send-email-peter.maydell@linaro.org
Message-id: 20170224164021.9066-3-clement.deschamps@antfield.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added a doc comment to the header file; changed to
use new behaviour of qdev_set_parent_bus()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of qdev_set_parent_bus() silently doing the wrong
thing if it's handed a device that's already on a bus,
have it remove the device from the old bus and add it to
the new one. This is useful for the raspi2 sdcard.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1488293711-14195-2-git-send-email-peter.maydell@linaro.org
Reset CPU interface registers of GICv3 when CPU is reset.
For this, ARMCPRegInfo struct is registered with one ICC
register whose resetfn is called when cpu is reset.
All the ICC registers are reset under one single register
reset function instead of calling resetfn for each ICC
register.
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1487850673-26455-6-git-send-email-vijay.kilari@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add gicv3state void pointer to CPUARMState struct
to store GICv3CPUState.
In case of usecase like CPU reset, we need to reset
GICv3CPUState of the CPU. In such scenario, this pointer
becomes handy.
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1487850673-26455-5-git-send-email-vijay.kilari@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This actually implements pre_save and post_load methods for in-kernel
vGICv3.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Message-id: 1487850673-26455-4-git-send-email-vijay.kilari@gmail.com
[PMM:
* use decimal, not 0bnnn
* fixed typo in names of ICC_APR0R_EL1 and ICC_AP1R_EL1
* completely rearranged the get and put functions to read and write
the state in a natural order, rather than mixing distributor and
redistributor state together]
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
[Vijay:
* Update macro KVM_VGIC_ATTR
* Use 32 bit access for gicd and gicr
* GICD_IROUTER, GICD_TYPER, GICR_PROPBASER and GICR_PENDBASER reg
access are changed from 64-bit to 32-bit access
* Add ICC_SRE_EL1 save and restore
* Dropped translate_fn mechanism and coded functions to handle
save and restore of edge_trigger and priority
* Number of APnR register saved/restored based on number of
priority bits supported]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
To Save and Restore ICC_SRE_EL1 register introduce vmstate
subsection and load only if non-zero.
Also initialize icc_sre_el1 with to 0x7 in pre_load
function.
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1487850673-26455-3-git-send-email-vijay.kilari@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The local variable 'nvic' in stm32f205_soc_realize() no longer
holds a direct pointer to the NVIC device; it is a pointer to
the ARMv7M container object. Rename it 'armv7m' accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-12-git-send-email-peter.maydell@linaro.org
Switch the stm32f205 SoC to create the armv7m object directly
rather than via the armv7m_init() wrapper. This fits better
with the SoC model's very QOMified design.
In particular this means we can push loading the guest image
out to the top level board code where it belongs, rather
than the SoC object having a QOM property for the filename
to load.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-11-git-send-email-peter.maydell@linaro.org
The SysTick timer isn't really part of the NVIC proper;
we just modelled it that way back when we couldn't
easily have devices that only occupied a small chunk
of a memory region. Split it out into its own device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1487604965-23220-10-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The NVIC is a core v7M device that exists for all v7M CPUs;
put it under a CONFIG_ARM_V7M rather than hiding it under
CONFIG_STELLARIS.
(We'll use CONFIG_ARM_V7M for the SysTick device too
when we split it out of the NVIC.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-9-git-send-email-peter.maydell@linaro.org
Instead of the bitband device doing a cpu_physical_memory_read/write,
make it take a MemoryRegion which specifies where it should be
accessing, and use address_space_read/write to access the
corresponding AddressSpace.
Since this entails pretty much a rewrite, convert away from
old_mmio in the process.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-8-git-send-email-peter.maydell@linaro.org
Make the NVIC device expose a memory region for its users
to map, rather than mapping itself into the system memory
space on realize, and get the one user (the ARMv7M object)
to do this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-7-git-send-email-peter.maydell@linaro.org
Make the ARMv7M object take a memory region link which it uses
to wire up the bitband rather than having them always put
themselves in the system address space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-6-git-send-email-peter.maydell@linaro.org
Make the legacy armv7m_init() function use the newly QOMified
armv7m object rather than doing everything by hand.
We can return the armv7m object rather than the NVIC from
armv7m_init() because its interface to the rest of the
board (GPIOs, etc) is identical.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-5-git-send-email-peter.maydell@linaro.org
Create a proper QOM object for the armv7m container, which
holds the CPU, the NVIC and the bitband regions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-4-git-send-email-peter.maydell@linaro.org
Move the NVICState struct definition into a header, so we can
embed it into other QOM objects like SoCs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-3-git-send-email-peter.maydell@linaro.org
Abstract the "load kernel" code out of armv7m_init() into its own
function. This includes the registration of the CPU reset function,
to parallel how we handle this for A profile cores.
We make the function public so that boards which choose to
directly instantiate an ARMv7M device object can call it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-2-git-send-email-peter.maydell@linaro.org
The Exynos4210 has cluster ID 0x9 in its MPIDR register (raw value
0x8000090x). If this cluster ID is not provided, then Linux kernel
cannot map DeviceTree nodes to MPIDR values resulting in kernel
warning and lack of any secondary CPUs:
DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
...
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 1 CPU
SMP: Total of 1 processors activated (24.00 BogoMIPS).
Provide a cluster ID so Linux will see proper MPIDR and will try to
bring the secondary CPU online.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-id: 20170226200142.31169-2-krzk@kernel.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without any clock controller, the Linux kernel was hitting division by
zero during boot or with clk_summary:
[ 0.000000] [<c031054c>] (unwind_backtrace) from [<c030ba6c>] (show_stack+0x10/0x14)
[ 0.000000] [<c030ba6c>] (show_stack) from [<c05b2660>] (dump_stack+0x88/0x9c)
[ 0.000000] [<c05b2660>] (dump_stack) from [<c05b11a4>] (Ldiv0+0x8/0x10)
[ 0.000000] [<c05b11a4>] (Ldiv0) from [<c06ad1e0>] (samsung_pll45xx_recalc_rate+0x58/0x74)
[ 0.000000] [<c06ad1e0>] (samsung_pll45xx_recalc_rate) from [<c0692ec0>] (clk_register+0x39c/0x63c)
[ 0.000000] [<c0692ec0>] (clk_register) from [<c125d360>] (samsung_clk_register_pll+0x2e0/0x3d4)
[ 0.000000] [<c125d360>] (samsung_clk_register_pll) from [<c125d7e8>] (exynos4_clk_init+0x1b0/0x5e4)
[ 0.000000] [<c125d7e8>] (exynos4_clk_init) from [<c12335f4>] (of_clk_init+0x17c/0x210)
[ 0.000000] [<c12335f4>] (of_clk_init) from [<c1204700>] (time_init+0x24/0x2c)
[ 0.000000] [<c1204700>] (time_init) from [<c1200b2c>] (start_kernel+0x24c/0x38c)
[ 0.000000] [<c1200b2c>] (start_kernel) from [<4020807c>] (0x4020807c)
Provide stub for clock controller returning reset values for PLLs.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-id: 20170226200142.31169-1-krzk@kernel.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the BCM2835 SDHost controller from Arasan.
Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr>
Message-id: 20170224164021.9066-2-clement.deschamps@antfield.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the NVIC SHCSR write behaviour which allows pending and
active status of some exceptions to be changed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Implement the exception return consistency checks
described in the v7M pseudocode ExceptionReturn().
Inspired by a patch from Michael Davidsaver's series, but
this is a reimplementation from scratch based on the
ARM ARM pseudocode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The VECTCLRACTIVE and VECTRESET bits in the AIRCR are both
documented as UNPREDICTABLE if you write a 1 to them when
the processor is not halted in Debug state (ie stopped
and under the control of an external JTAG debugger).
Since we don't implement Debug state or emulated JTAG
these bits are always UNPREDICTABLE for us. Instead of
logging them as unimplemented we can simply log writes
as guest errors and ignore them.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: change extracted from another patch; commit message
constructed from scratch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Having armv7m_nvic_acknowledge_irq() return the new value of
env->v7m.exception and its one caller assign the return value
back to env->v7m.exception is pointless. Just make the return
type void instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The v7M exception architecture requires that if a synchronous
exception cannot be taken immediately (because it is disabled
or at too low a priority) then it should be escalated to
HardFault (and the HardFault exception is then taken).
Implement this escalation logic.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: extracted from another patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Now that the NVIC is its own separate implementation, we can
clean up the GIC code by removing REV_NVIC and conditionals
which use it.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The M profile condition for when we can take a pending exception or
interrupt is not the same as that for A/R profile. The code
originally copied from the A/R profile version of the
cpu_exec_interrupt function only worked by chance for the
very simple case of exceptions being masked by PRIMASK.
Replace it with a call to a function in the NVIC code that
correctly compares the priority of the pending exception
against the current execution priority of the CPU.
[Michael Davidsaver's patchset had a patch to do something
similar but the implementation ended up being a rewrite.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Despite some superficial similarities of register layout, the
M-profile NVIC is really very different from the A-profile GIC.
Our current attempt to reuse the GIC code means that we have
significant bugs in our NVIC.
Implement the NVIC as an entirely separate device, to give
us somewhere we can get the behaviour correct.
This initial commit does not attempt to implement exception
priority escalation, since the GIC-based code didn't either.
It does fix a few bugs in passing:
* ICSR.RETTOBASE polarity was wrong and didn't account for
internal exceptions
* ICSR.VECTPENDING was 16 too high if the pending exception
was for an external interrupt
* UsageFault, BusFault and MemFault were not disabled on reset
as they are supposed to be
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: reworked, various bugs and stylistic cleanups]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Add a state field for the v7M PRIGROUP register and implent
reading and writing it. The current NVIC doesn't honour
the values written, but the new version will.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Rename the nvic_state struct to NVICState, to match
our naming conventions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The i.MX timer device can be reset by writing to the SWR bit
of the CR register. This has to behave differently from hard
(power-on) reset because it does not reset all of the bits
in the CR register.
We were incorrectly implementing soft reset and hard reset
the same way, and in addition had a logic error which meant
that we were clearing the bits that soft-reset is supposed
to preserve and not touching the bits that soft-reset clears.
This was not correct behaviour for either kind of reset.
Separate out the soft reset and hard reset code paths, and
correct the handling of reset of the CR register so that it
is correct in both cases.
Signed-off-by: Kurban Mallachiev <mallachiev@ispras.ru>
[PMM: rephrased commit message, spacing on operators;
use bool rather than int for is_soft_reset]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In 2.9 ITS will block save/restore and migration use cases. As such,
let's introduce a user option that allows to turn its instantiation
off, along with GICv3. With the "its" option turned false, migration
will be possible, obviously at the expense of MSI support (with GICv3).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1487681108-14452-1-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
object_new(FOO) returns an object with ref_cnt == 1
and following
object_property_set_bool(cpuobj, true, "realized", NULL)
set parent of cpuobj to '/machine/unattached' which makes
ref_cnt == 2.
Since machvirt_init() doesn't take ownership of cpuobj
returned by object_new() it should explicitly drop
reference to cpuobj when dangling pointer is about to
go out of scope like it's done pc_new_cpu() to avoid
object leak.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1487253461-269218-1-git-send-email-imammedo@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In SDHCI protocol, the 'Block count enable' bit of the Transfer
Mode register is relevant only in multi block transfers. We need
not check it in single block transfers.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20170214185225.7994-5-ppandit@redhat.com
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In sdhci_write invoke multi block transfer if it is enabled
in the transfer mode register 's->trnmod'.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20170214185225.7994-4-ppandit@redhat.com
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the SDHCI protocol, the transfer mode register value
is used during multi block transfer to check if block count
register is enabled and should be updated. Transfer mode
register could be set such that, block count register would
not be updated, thus leading to an infinite loop. Add check
to avoid it.
Reported-by: Wjjzhang <wjjzhang@tencent.com>
Reported-by: Jiang Xin <jiangxin1@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20170214185225.7994-3-ppandit@redhat.com
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In SDHCI protocol, the transfer mode register is defined
to be of 6 bits. Mask its value with '0x0037' so that an
invalid value could not be assigned.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20170214185225.7994-2-ppandit@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch to using qcrypto_random_bytes() rather than rand() as
our source of randomness for the BCM2835 RNG.
If qcrypto_random_bytes() fails, we don't want to return the guest a
non-random value in case they're really using it for cryptographic
purposes, so the best we can do is a fatal error. This shouldn't
happen unless something's broken, though.
In theory we could implement this device's full FIFO and interrupt
semantics and then just stop filling the FIFO. That's a lot of work,
though, and doesn't really give a very nice diagnostic to the user
since the guest will just seem to hang.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Recent vanilla Raspberry Pi kernels started to make use of
the hardware random number generator in BCM2835 SoC. As a
result, those kernels wouldn't work anymore under QEMU
but rather just freeze during the boot process.
This patch implements a trivial BCM2835 compatible RNG,
and adds it as a peripheral to BCM2835 platform, which
allows to boot a vanilla Raspberry Pi kernel under Qemu.
Changes since v1:
* Prevented guest from writing [31..20] bits in rng_status
* Removed redundant minimum_version_id_old
* Added field entries for the state
* Changed realize function to reset
Signed-off-by: Marcin Chojnacki <marcinch7@gmail.com>
Message-id: 20170210210857.47893-1-marcinch7@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit a3a3d8c7 introduced a segfault bug while checking for
'dc->vmsd->unmigratable' which caused QEMU to crash when trying to add
devices which do no set their 'dc->vmsd' yet while initialization.
Place a 'dc->vmsd' check prior to it so that we do not segfault for
such devices.
NOTE: This doesn't compromise the functioning of --only-migratable
option as all the unmigratable devices do set their 'dc->vmsd'.
Introduce a new function check_migratable() and move the
only_migratable check inside it, also use stubs to avoid user-mode qemu
build failures.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1487009088-23891-1-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Load the network boot image into guest RAM when the boot
device selected is a network device. Use some of the reserved
space in IplBlockCcw to store the start address of the netboot
image.
A user could also use 'chreipl'(diag 308/5) to change the boot device.
So every time we update the IPLB, we need to verify if the selected
boot device is a network device so we can appropriately load the
network boot image.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add new field to S390IPLState to store the name of the network boot
loader.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The current QEMU ROM infrastructure rejects late loading of ROMs.
And ELFs are currently loaded as ROM, this prevents delayed loading
of ELFs. So when loading ELF, allow the user to specify if ELF should
be loaded as ROM or not.
If an ELF is not loaded as ROM, then they are not restored on a
guest reboot/reset and so its upto the user to handle the reloading.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Now that the all callbacks have been converted to use "at" syscalls, we
can drop this code.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_open2() callback is vulnerable to symlink attacks because it
calls:
(1) open() which follows symbolic links for all path elements but the
rightmost one
(2) local_set_xattr()->setxattr() which follows symbolic links for all
path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
mkdir(), both functions following symbolic links for all path
elements but the rightmost one
(4) local_post_create_passthrough() which calls in turn lchown() and
chmod(), both functions also following symbolic links
This patch converts local_open2() to rely on opendir_nofollow() and
mkdirat() to fix (1), as well as local_set_xattrat(),
local_set_mapped_file_attrat() and local_set_cred_passthrough() to
fix (2), (3) and (4) respectively. Since local_open2() already opens
a descriptor to the target file, local_set_cred_passthrough() is
modified to reuse it instead of opening a new one.
The mapped and mapped-file security modes are supposed to be identical,
except for the place where credentials and file modes are stored. While
here, we also make that explicit by sharing the call to openat().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_mkdir() callback is vulnerable to symlink attacks because it
calls:
(1) mkdir() which follows symbolic links for all path elements but the
rightmost one
(2) local_set_xattr()->setxattr() which follows symbolic links for all
path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
mkdir(), both functions following symbolic links for all path
elements but the rightmost one
(4) local_post_create_passthrough() which calls in turn lchown() and
chmod(), both functions also following symbolic links
This patch converts local_mkdir() to rely on opendir_nofollow() and
mkdirat() to fix (1), as well as local_set_xattrat(),
local_set_mapped_file_attrat() and local_set_cred_passthrough() to
fix (2), (3) and (4) respectively.
The mapped and mapped-file security modes are supposed to be identical,
except for the place where credentials and file modes are stored. While
here, we also make that explicit by sharing the call to mkdirat().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_mknod() callback is vulnerable to symlink attacks because it
calls:
(1) mknod() which follows symbolic links for all path elements but the
rightmost one
(2) local_set_xattr()->setxattr() which follows symbolic links for all
path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
mkdir(), both functions following symbolic links for all path
elements but the rightmost one
(4) local_post_create_passthrough() which calls in turn lchown() and
chmod(), both functions also following symbolic links
This patch converts local_mknod() to rely on opendir_nofollow() and
mknodat() to fix (1), as well as local_set_xattrat() and
local_set_mapped_file_attrat() to fix (2) and (3) respectively.
A new local_set_cred_passthrough() helper based on fchownat() and
fchmodat_nofollow() is introduced as a replacement to
local_post_create_passthrough() to fix (4).
The mapped and mapped-file security modes are supposed to be identical,
except for the place where credentials and file modes are stored. While
here, we also make that explicit by sharing the call to mknodat().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_symlink() callback is vulnerable to symlink attacks because it
calls:
(1) symlink() which follows symbolic links for all path elements but the
rightmost one
(2) open(O_NOFOLLOW) which follows symbolic links for all path elements but
the rightmost one
(3) local_set_xattr()->setxattr() which follows symbolic links for all
path elements
(4) local_set_mapped_file_attr() which calls in turn local_fopen() and
mkdir(), both functions following symbolic links for all path
elements but the rightmost one
This patch converts local_symlink() to rely on opendir_nofollow() and
symlinkat() to fix (1), openat(O_NOFOLLOW) to fix (2), as well as
local_set_xattrat() and local_set_mapped_file_attrat() to fix (3) and
(4) respectively.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_chown() callback is vulnerable to symlink attacks because it
calls:
(1) lchown() which follows symbolic links for all path elements but the
rightmost one
(2) local_set_xattr()->setxattr() which follows symbolic links for all
path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
mkdir(), both functions following symbolic links for all path
elements but the rightmost one
This patch converts local_chown() to rely on open_nofollow() and
fchownat() to fix (1), as well as local_set_xattrat() and
local_set_mapped_file_attrat() to fix (2) and (3) respectively.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_chmod() callback is vulnerable to symlink attacks because it
calls:
(1) chmod() which follows symbolic links for all path elements
(2) local_set_xattr()->setxattr() which follows symbolic links for all
path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
mkdir(), both functions following symbolic links for all path
elements but the rightmost one
We would need fchmodat() to implement AT_SYMLINK_NOFOLLOW to fix (1). This
isn't the case on linux unfortunately: the kernel doesn't even have a flags
argument to the syscall :-\ It is impossible to fix it in userspace in
a race-free manner. This patch hence converts local_chmod() to rely on
open_nofollow() and fchmod(). This fixes the vulnerability but introduces
a limitation: the target file must readable and/or writable for the call
to openat() to succeed.
It introduces a local_set_xattrat() replacement to local_set_xattr()
based on fsetxattrat() to fix (2), and a local_set_mapped_file_attrat()
replacement to local_set_mapped_file_attr() based on local_fopenat()
and mkdirat() to fix (3). No effort is made to factor out code because
both local_set_xattr() and local_set_mapped_file_attr() will be dropped
when all users have been converted to use the "at" versions.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_link() callback is vulnerable to symlink attacks because it calls:
(1) link() which follows symbolic links for all path elements but the
rightmost one
(2) local_create_mapped_attr_dir()->mkdir() which follows symbolic links
for all path elements but the rightmost one
This patch converts local_link() to rely on opendir_nofollow() and linkat()
to fix (1), mkdirat() to fix (2).
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
When using the mapped-file security model, we also have to create a link
for the metadata file if it exists. In case of failure, we should rollback.
That's what this patch does.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_rename() callback is vulnerable to symlink attacks because it
uses rename() which follows symbolic links in all path elements but the
rightmost one.
This patch simply transforms local_rename() into a wrapper around
local_renameat() which is symlink-attack safe.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_renameat() callback is currently a wrapper around local_rename()
which is vulnerable to symlink attacks.
This patch rewrites local_renameat() to have its own implementation, based
on local_opendir_nofollow() and renameat().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_lstat() callback is vulnerable to symlink attacks because it
calls:
(1) lstat() which follows symbolic links in all path elements but the
rightmost one
(2) getxattr() which follows symbolic links in all path elements
(3) local_mapped_file_attr()->local_fopen()->openat(O_NOFOLLOW) which
follows symbolic links in all path elements but the rightmost
one
This patch converts local_lstat() to rely on opendir_nofollow() and
fstatat(AT_SYMLINK_NOFOLLOW) to fix (1), fgetxattrat_nofollow() to
fix (2).
A new local_fopenat() helper is introduced as a replacement to
local_fopen() to fix (3). No effort is made to factor out code
because local_fopen() will be dropped when all users have been
converted to call local_fopenat().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_readlink() callback is vulnerable to symlink attacks because it
calls:
(1) open(O_NOFOLLOW) which follows symbolic links for all path elements but
the rightmost one
(2) readlink() which follows symbolic links for all path elements but the
rightmost one
This patch converts local_readlink() to rely on open_nofollow() to fix (1)
and opendir_nofollow(), readlinkat() to fix (2).
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_truncate() callback is vulnerable to symlink attacks because
it calls truncate() which follows symbolic links in all path elements.
This patch converts local_truncate() to rely on open_nofollow() and
ftruncate() instead.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_statfs() callback is vulnerable to symlink attacks because it
calls statfs() which follows symbolic links in all path elements.
This patch converts local_statfs() to rely on open_nofollow() and fstatfs()
instead.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_utimensat() callback is vulnerable to symlink attacks because it
calls qemu_utimens()->utimensat(AT_SYMLINK_NOFOLLOW) which follows symbolic
links in all path elements but the rightmost one or qemu_utimens()->utimes()
which follows symbolic links for all path elements.
This patch converts local_utimensat() to rely on opendir_nofollow() and
utimensat(AT_SYMLINK_NOFOLLOW) directly instead of using qemu_utimens().
It is hence assumed that the OS supports utimensat(), i.e. has glibc 2.6
or higher and linux 2.6.22 or higher, which seems reasonable nowadays.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_remove() callback is vulnerable to symlink attacks because it
calls:
(1) lstat() which follows symbolic links in all path elements but the
rightmost one
(2) remove() which follows symbolic links in all path elements but the
rightmost one
This patch converts local_remove() to rely on opendir_nofollow(),
fstatat(AT_SYMLINK_NOFOLLOW) to fix (1) and unlinkat() to fix (2).
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_unlinkat() callback is vulnerable to symlink attacks because it
calls remove() which follows symbolic links in all path elements but the
rightmost one.
This patch converts local_unlinkat() to rely on opendir_nofollow() and
unlinkat() instead.
Most of the code is moved to a separate local_unlinkat_common() helper
which will be reused in a subsequent patch to fix the same issue in
local_remove().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_lremovexattr() callback is vulnerable to symlink attacks because
it calls lremovexattr() which follows symbolic links in all path elements
but the rightmost one.
This patch introduces a helper to emulate the non-existing fremovexattrat()
function: it is implemented with /proc/self/fd which provides a trusted
path that can be safely passed to lremovexattr().
local_lremovexattr() is converted to use this helper and opendir_nofollow().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_lsetxattr() callback is vulnerable to symlink attacks because
it calls lsetxattr() which follows symbolic links in all path elements but
the rightmost one.
This patch introduces a helper to emulate the non-existing fsetxattrat()
function: it is implemented with /proc/self/fd which provides a trusted
path that can be safely passed to lsetxattr().
local_lsetxattr() is converted to use this helper and opendir_nofollow().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_llistxattr() callback is vulnerable to symlink attacks because
it calls llistxattr() which follows symbolic links in all path elements but
the rightmost one.
This patch introduces a helper to emulate the non-existing flistxattrat()
function: it is implemented with /proc/self/fd which provides a trusted
path that can be safely passed to llistxattr().
local_llistxattr() is converted to use this helper and opendir_nofollow().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_lgetxattr() callback is vulnerable to symlink attacks because
it calls lgetxattr() which follows symbolic links in all path elements but
the rightmost one.
This patch introduces a helper to emulate the non-existing fgetxattrat()
function: it is implemented with /proc/self/fd which provides a trusted
path that can be safely passed to lgetxattr().
local_lgetxattr() is converted to use this helper and opendir_nofollow().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_open() and local_opendir() callbacks are vulnerable to symlink
attacks because they call:
(1) open(O_NOFOLLOW) which follows symbolic links in all path elements but
the rightmost one
(2) opendir() which follows symbolic links in all path elements
This patch converts both callbacks to use new helpers based on
openat_nofollow() to only open files and directories if they are
below the virtfs shared folder
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch opens the shared folder and caches the file descriptor, so that
it can be used to do symlink-safe path walk.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
When using the passthrough security mode, symbolic links created by the
guest are actual symbolic links on the host file system.
Since the resolution of symbolic links during path walk is supposed to
occur on the client side. The server should hence never receive any path
pointing to an actual symbolic link. This isn't guaranteed by the protocol
though, and malicious code in the guest can trick the server to issue
various syscalls on paths whose one or more elements are symbolic links.
In the case of the "local" backend using the "passthrough" or "none"
security modes, the guest can directly create symbolic links to arbitrary
locations on the host (as per spec). The "mapped-xattr" and "mapped-file"
security modes are also affected to a lesser extent as they require some
help from an external entity to create actual symbolic links on the host,
i.e. another guest using "passthrough" mode for example.
The current code hence relies on O_NOFOLLOW and "l*()" variants of system
calls. Unfortunately, this only applies to the rightmost path component.
A guest could maliciously replace any component in a trusted path with a
symbolic link. This could allow any guest to escape a virtfs shared folder.
This patch introduces a variant of the openat() syscall that successively
opens each path element with O_NOFOLLOW. When passing a file descriptor
pointing to a trusted directory, one is guaranteed to be returned a
file descriptor pointing to a path which is beneath the trusted directory.
This will be used by subsequent patches to implement symlink-safe path walk
for any access to the backend.
Symbolic links aren't the only threats actually: a malicious guest could
change a path element to point to other types of file with undesirable
effects:
- a named pipe or any other thing that would cause openat() to block
- a terminal device which would become QEMU's controlling terminal
These issues can be addressed with O_NONBLOCK and O_NOCTTY.
Two helpers are introduced: one to open intermediate path elements and one
to open the rightmost path element.
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(renamed openat_nofollow() to relative_openat_nofollow(),
assert path is relative and doesn't contain '//',
fixed side-effect in assert, Greg Kurz)
Signed-off-by: Greg Kurz <groug@kaod.org>
If these functions fail, they should not change *fs. Let's use local
variables to fix this.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
These functions are always called indirectly. It really doesn't make sense
for them to sit in a header file.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This patchset adds the throttle support for the 9p-local driver.
For now this functionality can be enabled only through qemu cli options.
QMP interface and support to other drivers need further extensions.
To make it simple for other 9p drivers, the throttle code has been put in
separate files.
Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
(pass extra NULL CoMutex * argument to qemu_co_queue_wait(),
added options to qemu-options.hx, Greg Kurz)
Signed-off-by: Greg Kurz <groug@kaod.org>
In this case, we are marshaling an error status instead of the errno value.
Reorganize the out and out_nofid labels to look like all the other cases.
Coverity reports this because the "err = -ENOENT" and "err = -EINVAL"
assignments above are dead, overwritten by the call to pdu_marshal.
(Coverity issues CID1348512 and CID1348513)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(also open-coded the success path since locking is a nop for us, Greg Kurz)
Signed-off-by: Greg Kurz <groug@kaod.org>
Don't truncate the multiplication and do a 64 bit one instead
because the result is stored in a 64 bit variable.
This fixes a similar coverity warning to commits 237a8650d6 and
4382fa6554, in a similar way, and is the final third of the fix for
coverity CID 1167561 (hopefully!).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The register_read() and register_write() functions expect a bitmask argument.
To avoid duplicated code, a new inlined function register_enabled_mask() is
introduced.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The "qemu,register" device needs to be wired up in source code, there
is no way the user can make any real use of this device with the
"-device" parameter or the "device_add" monitor command yet.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The "or-irq" device needs to be wired up in source code, there is no
way the user can make any real use of this device with the "-device"
parameter or the "device_add" monitor command yet.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We'll add a variant which accepts dmabufs soon. Change
the name so we can easily disturgish the two variants.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487669841-13668-2-git-send-email-kraxel@redhat.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJYs072AAoJEDNgw/dBGhJfJNMH/iPNHzrZLRilU6CceYpNQW1Z
262rITUXBZ04vVhNjdIU6OZDjD12eY67eznfapsNNJPSNNR7UUMa8dymFZfBxgRL
Kl9jciJKhWUBdzn8qkvP2umXA9I6NZs+OJbSz8vIYVEX8mF8EaYNLGP40J+4qc+X
2GByZRu5yoYe5Ex1hNgdzPGPlyvJwymu0y7WW0gDPCrKtSSGz7NRGA9S2dvbFGQb
kNnkkS2aEkbt8fDWsTkcKVog3jFNfBzdEYUJel237+dMqnepFt5V1UWFANznb7Xp
pmdOWYhWntvi8ONwJW+RRWe4Mes2ySfqelmVD602dreuIRkX1bHBWkXA3S8pSmM=
=2VrG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/artyom/tags/pull-sun4v-20170226' into staging
Pull request for Niagara patches 2017 02 26
# gpg: Signature made Sun 26 Feb 2017 21:56:06 GMT
# gpg: using RSA key 0x3360C3F7411A125F
# gpg: Good signature from "Artyom Tarasenko <atar4qemu@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2AD8 6149 17F4 B2D7 05C0 BB12 3360 C3F7 411A 125F
* remotes/artyom/tags/pull-sun4v-20170226:
niagara: check if a serial port is available
niagara: fail if a firmware file is missing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
fail if a firmware file is missing and not qtest_enabled(),
the later is necessary to allow some basic tests if
firmware is not available
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
CHanges:
* Add the Boston board with fixing the make check issue on 32-bit hosts.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)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=xOs6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170224-2' into staging
MIPS patches 2017-02-24-2
CHanges:
* Add the Boston board with fixing the make check issue on 32-bit hosts.
# gpg: Signature made Fri 24 Feb 2017 11:43:45 GMT
# gpg: using RSA key 0x2238EB86D5F797C2
# gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2
* remotes/yongbok/tags/mips-20170224-2:
hw/mips: MIPS Boston board support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
David Gibson