Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-19-git-send-email-peter.maydell@linaro.org
Replace the uint32 softfloat-specific typedef with uint32_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint32\b/uint32_t/g'
together with manual removal of the typedef definition,
manual undoing of various mis-hits, and another couple of
fixes found via test compilation.
All the uses in hw/ were using the wrong type by mistake.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-5-git-send-email-peter.maydell@linaro.org
Following the previous patch which changed vmxnet3 to be a pci express
device, this patch introduces a boolean property 'x-disable-pcie' whose
default is false.
Setting 'x-disable-pcie' to 'on' preserves the old 'pci device' (non
express) behavior. This allows migration to older versions.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Report the DSN extended PCI capability at 0x100.
DSN value is a transformation of device MAC address, as calculated
by VMware virtual hardware.
DSN is reported only if device is pcie.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Report the 'express endpoint' capability if on a PCIE bus.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Introduce a class type for vmxnet3, and the usual
DEVICE_CLASS/DEVICE_GET_CLASS macros.
No semantic change.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Following the previous patches, where vmxnet3's pci's msi/msix
capability offsets and msix's PBA table offsets have been changed, this
patch introduces a boolean property 'x-old-msi-offsets' to vmxnet3,
whose default is false.
Setting 'x-old-msi-offsets' to 'on' preserves the old offsets behavior,
which allows migration to older versions.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Place the PBA table at 0x1000, as placed by VMware virtual hardware.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Place device reported PCI capabilities at the same offsets as placed by
the VMware virtual hardware: MSI at [84], MSI-X at [9c].
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
VMXNET3_DEVICE_VERSION is used as return value for accessing
UPT Revision Report and Selection register. So rename it
to VMXNET3_UPT_REVISION.
Signed-off-by: Miao Yan <yanmiaoebest@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Return 0 on unknown command, this is what esxi (5.x+) behaves.
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
VMXNET3_CMD_GET_DEV_EXTRA_INFO should return 0 for emulation
mode
This behavior can be observed by the following steps:
1) run a Linux distro on esxi server (5.x+)
2) modify vmxnet3 Linux driver to read the register:
VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_DEV_EXTRA_INFO);
ret = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
pr_info("vmxnet3 dev_info: 0x%x\n", ret);
The kernel log will have some like the following message:
[ 7005.111170] vmxnet3 dev_info: 0x0
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
VMXNET3_CMD_GET_DID_LO should return PCI ID of the device
and VMXNET3_CMD_GET_DID_HI should return vmxnet3 revision ID.
This behavior can be observed by the following steps:
1) run a Linux distro on esxi server (5.x+)
2) modify vmxnet3 Linux driver to read DID_HI and DID_LO:
VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_DID_LO);
lo = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_DID_HI);
high = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
pr_info("vmxnet3 DID lo: 0x%x, high: 0x%x\n", lo, high);
The kernel log will have something like the following message:
[ 7005.111170] vmxnet3 DID lo: 0x7b0, high: 0x1
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When reading device status, 0 means device is successfully
activated and 1 means error.
This behavior can be observed by the following steps:
1) run a Linux distro on esxi server (5.5+)
2) modify vmxnet3 Linux driver to give it an invalid
address to 'adapter->shared_pa' which is the
shared memory for guest/host communication
This will trigger device activation failure and kernel
log will have the following message:
[ 7138.403256] vmxnet3 0000:03:00.0 eth1: Failed to activate dev: error 1
So return 1 on device activation failure instead of -1;
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Vmxnet3 device emulator does not check if the device is active
before activating it, also it did not free the transmit & receive
buffers while deactivating the device, thus resulting in memory
leakage on the host. This patch fixes both these issues to avoid
host memory leakage.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use %zu specifier for size_t in printf, otherwise build would fail
on platforms where size_t is not unsigned long
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Macro MAC_FMT and MAC_ARG are not defined, but used in vmxnet3_net_init().
This will cause build error when debug level is raised in
vmxnet3_debug.h (enable all VMXNET3_DEBUG_xxx).
Use VMXNET_MF and VXMNET_MA instead.
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
vmxnet3 always produces a warning under qtest.
This is not a user error, don't warn.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Guest OS may issue VMXNET3_CMD_GET_STATS even before device was
activated (for example in linux, after insmod but prior net-dev open).
Accessing shared descriptors prior device activation is illegal as the
VMXNET3State structures have not been fully initialized.
As a result, guest memory gets corrupted and may lead to guest OS
crashes.
Fix, by not filling the stats descriptors if device is inactive.
Reported-by: Leonid Shatz <leonid.shatz@ravellosystems.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Dana Rubin <dana.rubin@ravellosystems.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Some drivers (e.g. vmware-tools) issue the VMXNET3_CMD_GET_ADAPTIVE_RING_INFO
command.
Currently, due to lack of support, a bogus value (-1) is returned.
Support this command, returning the "adaptive-ring disabled" flag.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Instead of asserting, return the actual IMR register value.
This is aligned with what's returned on ESXi.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Tested-by: Dana Rubin <dana.rubin@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Validation of l2 header length assumed minimal packet size as
eth_header + 2 * vlan_header regardless of the actual protocol.
This caused crash for valid non-IP packets shorter than 22 bytes, as
'tx_pkt->packet_type' hasn't been assigned for such packets, and
'vmxnet3_on_tx_done_update_stats()' expects it to be properly set.
Refine header length validation in 'vmxnet_tx_pkt_parse_headers'.
Check its return value during packet processing flow.
As a side effect, in case IPv4 and IPv6 header validation failure,
corrupt packets will be dropped.
Signed-off-by: Dana Rubin <dana.rubin@ravellosystems.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Commit 6e99c63 ("net/socket: Drop net_socket_can_send") changed the
semantics around .can_receive for sockets to now require the device to
flush queued pkts when transitioning to a .can_receive=true state. But
it's OK to drop incoming packets when the link is not active.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
From: Dana Rubin <dana.rubin@ravellosystems.com>
In commit 80da311d81,
"net/vmxnet3: Fix RX TCP/UDP checksum on partially summed packets"
a debug message was introduced in vmxnet3_rx_need_csum_calculate() for
an unlikely input condition.
The message accidentally printed 'len' variable instead of 'pkt_len'.
Fix, providing the correct argument.
Signed-off-by: Dana Rubin <dana.rubin@ravellosystems.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-id: 1438109090-18957-1-git-send-email-shmulik.ladkani@ravellosystems.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert partially summed packets to be fully checksummed.
In case csum offloaded packet, vmxnet3 implementation always passes an
RxCompDesc with the "Checksum calculated and found correct" notification
to the OS. This emulates the observed ESXi behavior.
Therefore, if packet has the NEEDS_CSUM bit set, we must calculate and
place a fully computed checksum into the tcp/udp header. Otherwise, the
OS driver will receive a checksum-correct indication but with the actual
tcp/udp checksum field having just the pseudo header csum value.
If host OS performs forwarding, it will forward an incorrectly
checksummed packet.
Signed-off-by: Dana Rubin <dana.rubin@ravellosystems.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-id: 1436864116-19154-3-git-send-email-shmulik.ladkani@ravellosystems.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Separate RX packet protocol parsing out of 'vmxnet_rx_pkt_attach_data'.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-id: 1436864116-19154-2-git-send-email-shmulik.ladkani@ravellosystems.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When running ESXi under qemu there is an issue with the ESXi guest
discarding packets that are too short. The guest discards any packets
under the normal minimum length for an ethernet packet (60). This
results in odd behaviour where other hosts or VMs on other hosts can
communicate with the ESXi guest just fine (since there's a physical NIC
somewhere doing padding), but VMs on the host and the host itself cannot
because the ARP request packets are too small for the ESXi host to
accept.
Someone in the past thought this was worth fixing, and added code to the
vmxnet3 qemu emulation such that if it is receiving packets smaller than
60 bytes to pad the packet out to 60. Unfortunately this code is wrong
(or at least in the wrong place). It does so BEFORE before taking into
account the vnet_hdr at the front of the packet added by the tap device.
As a result, it might add padding, but it never adds enough.
Specifically it adds 10 less (the length of the vnet_hdr) than it needs
to.
The following (hopefully "obviously correct") patch simply swaps the
order of processing the vnet header and the padding. With this patch an
ESXi guest is able to communicate with the host or other local VMs.
Signed-off-by: Brian Kress <kressb@moose.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Most notably this includes virtio cross-endian patches.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVg+xdAAoJECgfDbjSjVRp6AAH/3ILznMtvJZjQ/WOjLEsL13M
+0cYEM1LI6LbLhqeruQVVcY9/hx61yHxZMoLkVg/I2po7F4HDNI2vo5Y7eGx+xN0
5rlcAw9/ZQ6SkCVmjN/VZfISW5mSqCaKH8gNzu8AigjsryJSj5iDXv1YJimwsF+5
cgCerhLIVvEkXmNj1ChwR+fz1IgFzJ8TRaZ0N2glxLyVjgKS57diqZF3Rbg2DdQl
BPbekbbtxesPgmKRvtarbhjx26TlnP1YShjhWA5r72gBNlqblLDycpaIGXr34b3a
sLIZjxzQtTEGcaGtkifMgazyK3rY3JmzOshD0onFOWY1r6Abxuj7eTZOEE6JQXk=
=tju/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci fixes, enhancements
Most notably this includes virtio cross-endian patches.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost: enable vhost without without MSI-X
pci: Don't register a specialized 'config_write' if default behavior is intended
hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf()
vhost_net: re-enable when cross endian
vhost-net: tell tap backend about the vnet endianness
tap: fix non-linux build
tap: add VNET_LE/VNET_BE operations
vhost: set vring endianness for legacy virtio
virtio: introduce virtio_legacy_is_cross_endian()
linux-headers: sync vhost.h
vhost-user: part of virtio
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Few devices have their specialized 'config_write' methods which simply
call 'pci_default_write_config' followed by a 'msix_write_config' or
'msi_write_config' calls, using exact same arguments.
This is unnecessary as 'pci_default_write_config' already invokes
'msi_write_config' and 'msix_write_config'.
Also, since 'pci_default_write_config' is the default 'config_write'
handler, we can simply avoid the registration of these specialized
versions.
Cc: Leonid Shatz <leonid.shatz@ravellosystems.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
Convert the device models where initialization obviously can't fail.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
All NICs have a cleanup function that, in most cases, zeroes the pointer
to the NICState. In some cases, it frees data belonging to the NIC.
However, this function is never called except when exiting from QEMU.
It is not necessary to NULL pointers and free data here; the right place
to do that would be in the device's unrealize function, after calling
qemu_del_nic. Zeroing the NIC multiple times is also wrong for multiqueue
devices.
This cleanup function gets in the way of making the NetClientStates for
the NIC hold an object_ref reference to the object, so get rid of it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On this way, we can assure the new bootindex take effect
during vm rebooting.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When running VMware ESXi under qemu-kvm the guest discards frames
that are too short. Short ARP Requests will be dropped, this prevents
guests on the same bridge as VMware ESXi from communicating. This patch
simply adds the padding on the network device itself.
Signed-off-by: Ben Draper <ben@xrsa.net>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Memory changes for QOMification and automatic tracking of MR lifetime.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=M+/m
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
SCSI changes that enable sending vendor-specific commands via virtio-scsi.
Memory changes for QOMification and automatic tracking of MR lifetime.
# gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
mtree: remove write-only field
memory: Use canonical path component as the name
memory: Use memory_region_name for name access
memory: constify memory_region_name
exec: Abstract away ref to memory region names
loader: Abstract away ref to memory region names
tpm_tis: remove instance_finalize callback
memory: remove memory_region_destroy
memory: convert memory_region_destroy to object_unparent
ioport: split deletion and destruction
nic: do not destroy memory regions in cleanup functions
vga: do not dynamically allocate chain4_alias
sysbus: remove unused function sysbus_del_io
qom: object: move unparenting to the child property's release callback
qom: object: delete properties before calling instance_finalize
virtio-scsi: implement parse_cdb
scsi-block, scsi-generic: implement parse_cdb
scsi-block: extract scsi_block_is_passthrough
scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo
scsi-bus: prepare scsi_req_new for introduction of parse_cdb
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function is empty after the previous patch, so remove it.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
imitate nearby code about using '!value' or 'value == NULL'
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
In vmxnet3_cleanup_msix(), there is called msix_vector_unuse() with
VMXNET3_MAX_INTRS. That is not correct since vector of
value VMXNET3_MAX_INTRS was never used. Also all the used vectors
are not un-used. So call vmxnet3_unuse_msix_vectors() instead which
does the correct job.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes warnings from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
CVE-2013-4544
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1396604722-11902-5-git-send-email-dmitry@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CVE-2013-4544
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1396604722-11902-4-git-send-email-dmitry@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CVE-2013-4544
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1396604722-11902-3-git-send-email-dmitry@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CVE-2013-4544
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1396604722-11902-2-git-send-email-dmitry@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio_net offload APIs are used on the NIC's peer (i.e. the tap
device). The API was defined to implicitly use nc->peer, saving the
caller the trouble.
This wasn't ideal because:
1. There are callers who have the peer but not the NIC. Currently they
are forced to bypass the API and access peer->info->... directly.
2. The rest of the net.h API uses nc, not nc->peer, so it is
inconsistent.
This patch pushes nc->peer back up to callers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With this patch, virtio-net and vmxnet3 frontends make
use of the qemu_peer_* API for backend offloadings manipulations,
instead of calling TAP-specific functions directly.
We also remove the existing checks which prevent those frontends
from using offloadings with backends different from TAP (e.g. netmap).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pci_set_irq uses PCI_INTERRUPT_PIN config register
to compute device INTx pin to assert/deassert.
An assert is used to ensure that intx received
from the quest OS corresponds to PCI_INTERRUPT_PIN.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dmitry Fleytman