While it make sense to pass a conditional argument to tcg_out_*()
functions as the ARM architecture allows that, it doesn't make sense
for qemu_ld/st functions. These functions use comparison instructions
and conditional execution already, so it is not possible to use a
second level of conditional execution.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add an bswap16 and bswap32 ops, either using the rev and rev16
instructions on ARMv6+ or shifts and logical operations on previous
ARM versions. In both cases the result use less instructions than
the pure TCG version.
These ops are also needed by the qemu_ld/st functions.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add an ext16u op, either using the uxth instruction on ARMv6+ or two
shifts on previous ARM versions. In both cases the result use the same
number or less instructions than the pure TCG version.
Also move all sign extension code to separate functions, so that they
can be reused in other parts of the code.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use a set of variables to define the allowed ARM instructions, depending
on the __ARM_ARCH_*__ GCC defines.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The TCG ARM backends uses integer values to refer to both immediate
values and register number. This makes the code difficult to read.
The patch below replaces all (if I haven't miss any ;-) integer values
representing register number by TCG_REG_* enum values.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of writing very compact code, declare all registers that are
clobbered or reserved one by one. This makes the code easier to read.
Also declare all the 16 registers to TCG, and mark pc as reserved.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is no need to save the LR register (r14) before a call to a
subroutine. According to the "Procedure Call Standard for the ARM
Architecture", it is the job of the callee to save this register.
Moreover, this register is already saved in the prologue/epilogue.
This patch removes the disabled SAVE_LR code, as there is no need to
reenable later.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 86feb1c860
did not change all occurrences of INDEX_op_qemu_ld32u
for tcg/arm.
Please note that I could not test this patch
(I have currently no arm system available).
Cc: Richard Henderson <rth@twiddle.net>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Some targets (e.g. Alpha and MIPS64) need to keep 32-bit operands
sign-extended in 64-bit registers (regardless of the "real" sign
of the operand). For that, we need to be able to distinguish
between a 32-bit load with a 32-bit result and a 32-bit load with
a given extension to a 64-bit result. This distinction already
exists for the ld* loads, but not the qemu_ld* loads.
Reserve qemu_ld32u for 64-bit outputs and introduce qemu_ld32 for
32-bit outputs. Adjust all code generators to match.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Give the enumeration formed from tcg-opc.h a name: TCGOpcode.
Use that enumeration type instead of "int" whereever appropriate.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is no need to save r7, it is used to store the address
of the env structure and is not modified by GCC.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Some targets like ARM would benefit to use 32-bit helpers for
div/rem/divu/remu.
Create a #define for div2 so that targets can select between
div, div2 and helper implementation. Use the helper version if none
of the #define are present.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since commit 6113d6d316 QEMU crashes
on ARM hosts. This is not a bug of this commit, but a latent bug
revealed by this commit.
The TCG code is called through a procedure call using the prologue
and epilogue code. This code does not save and restore enough registers.
The "Procedure Call Standard for the ARM Architecture" says:
A subroutine must preserve the contents of the registers r4-r8, r10,
r11 and SP (and r9 in PCS variants that designate r9 as v6).
The current code only saves and restores r9 to r11, and misses r4 to
r8. The patch fixes that by saving r4 to r12. Theoretically there is
no need to save and restore r12, but an even number of registers have
to be saved as per EABI.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When restoring register values, increase the stack register for skipped
values.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
This patch uses sxtb for ext8s_i32 and sxth for ext16s_i32 in ARM back-end.
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
the encode_imm function in tcg/arm/tcg-target.c lacks shift declaration.
Laurent
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
this patch handles all possible constants for immediate operand of ALU ops.
I'm not very satisfied by the implementation.
Laurent
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
- use movw/movt to load immediate values for ARMv7-A
- implement add/sub/and/or/xor with immediate (only 8-bit)
Laurent
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Re-implement GUEST_BASE support.
Offset guest ddress space by default if the guest binary contains
regions below the host mmap_min_addr.
Implement support for i386, x86-64 and arm hosts.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Paul Brook <paul@codesourcery.com>
Rename bswap_i32 into bswap32_i32 and bswap_i64 into bswap64_i64
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6829 c046a42c-6fe2-441c-8c8c-71466251a162
Emulating fldl on arm doesn't seem to work too well. It's the way
qemu_ld64 is translated to arm instructions.
tcg_out_ld32_12(s, COND_AL, data_reg, addr_reg, 0);
tcg_out_ld32_12(s, COND_AL, data_reg2, addr_reg, 4);
Consider case where data_reg==0, data_reg2==1, and addr_reg==0. First load
overwrited addr_reg. So let's put an if (data_ref==addr_reg).
(Pablo Virolainen)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6808 c046a42c-6fe2-441c-8c8c-71466251a162
Remove definitions for TCG_AREGs corresponding to AREG definitions
removed in r6778.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6779 c046a42c-6fe2-441c-8c8c-71466251a162
According to malc TCG will often genereate an add2/sub2/mul2 with low
half of the output in the same register as high half of one of the
inputs, so account for that.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5847 c046a42c-6fe2-441c-8c8c-71466251a162
Otherwise when tb_exit generates a jump beyond the pc-relative range,
tcg_out_goto() spans two/three instructions and we load the tb return
value from a wrong address. This is #ifdefed out currently because
we take care for the jumps to be local.
Problem spotted by Steffen Liebergeld.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5845 c046a42c-6fe2-441c-8c8c-71466251a162
Calling the clear cache syscall directly generates an illegal instruction
on some (armv4) kernels.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5843 c046a42c-6fe2-441c-8c8c-71466251a162
When a branch to label is translated it generates a reloc that is filled in
when the label is translated. However, when handling an exception and
searching for the pc we abort the translation early and we sometimes
translate the branch but not the corresponding label and so no relocation
is done. When the block is executed again the branch points to no-where.
It seems tcg/sparc/ is going to suffer from the same issue.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4547 c046a42c-6fe2-441c-8c8c-71466251a162
offsetof(CPUState, tlb_table[mem_index][0].addr_read) with mem_index > 0
was larger than max immediate offset for ldr and str (12-bit) so insert an
additional insn to add the mem_index offset.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4542 c046a42c-6fe2-441c-8c8c-71466251a162
Updated from previous version to use the tcg prologue/epilogue mechanism, may be slower than direct call.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4500 c046a42c-6fe2-441c-8c8c-71466251a162
Aurelien Jarno