If we call qemu_cpu_kick more than once before the target was able to
process the signal, pthread_kill will fail, and qemu will abort. Prevent
this by avoiding the redundant signal.
This logic can be found in qemu-kvm as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
cpu_reset zeroes CPUState upto breakpoints member. Contents of
stop/stopped should not be zeroed on cpu_reset.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
run_on_cpu allows to execute work on a given CPUState context.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Historically the qemu tlb "addend" field was used for both RAM and IO accesses,
so needed to be able to hold both host addresses (unsigned long) and guest
physical addresses (target_phys_addr_t). However since the introduction of
the iotlb field it has only been used for RAM accesses.
This means we can change the type of addend to unsigned long, and remove
associated hacks in the big-endian TCG backends.
We can also remove the host dependence from target_phys_addr_t.
Signed-off-by: Paul Brook <paul@codesourcery.com>
QEMU uses a fixed page size for the CPU TLB. If the guest uses large
pages then we effectively split these into multiple smaller pages, and
populate the corresponding TLB entries on demand.
When the guest invalidates the TLB by virtual address we must invalidate
all entries covered by the large page. However the address used to
invalidate the entry may not be present in the QEMU TLB, so we do not
know which regions to clear.
Implementing a full vaiable size TLB is hard and slow, so just keep a
simple address/mask pair to record which addresses may have been mapped by
large pages. If the guest invalidates this region then flush the
whole TLB.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Touching the user space representation of KVM's VCPU state is -
naturally - a per-VCPU thing. So move the dirty flag into KVM_CPU_COMMON
and rename it at this chance to reflect its true meaning.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This reverts commit ebbc8a3d8e.
As suggested by Jan Kiszka,
"It was obsoleted by d1793b836f8f123b961c613de1bb1c0c185c84cc and now
saves/restores a useless field."
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As KVM now makes use of exception_index to keep pending exceptions, we
have to save&restore this field as well.
NOTE: We have to nail the arch-independent exception_index down to a
certain bit width for proper vmstate processing, namely to 32 bit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
For injecting multi-core and multi-threading CPU topology into guests
extend the -smp syntax to accommodate cores and threads specification.
Syntax: -smp smp_value[,cores=nr_cores][,threads=nr_threads]\
[,socket=nr_sockets][,maxcpus=max_cpus]
smp_value is the legacy value specifying the total number of vCPUs for
the guest. If you specify one of cores, threads or sockets this value
can be omitted. Missing values will be computed to fulfill:
smp_value = nr_cores * nr_threads * nr_sockets
where it will favour sockets over cores over threads (to mimic the
current behavior, which will only inject multiple sockets.)
So -smp 4,threads=2 will inject two sockets with 2 threads each,
-smp cores=4 is an abbreviation for -smp 4,cores=4,threads=1,sockets=1.
If max_cpus (the number of hotpluggable CPUs) is omitted, it will
be set to smp_value.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When debugging multi-threaded programs, QEMU's gdb stub would report the
correct number of threads (the qfThreadInfo and qsThreadInfo packets).
However, the stub was unable to actually switch between threads (the T
packet), since it would report every thread except the first as being
dead. Furthermore, the stub relied upon cpu_index as a reliable means
of assigning IDs to the threads. This was a bad idea; if you have this
sequence of events:
initial thread created
new thread #1
new thread #2
thread #1 exits
new thread #3
thread #3 will have the same cpu_index as thread #1, which would confuse
GDB. (This problem is partly due to the remote protocol not having a
good way to send thread creation/destruction events.)
We fix this by using the host thread ID for the identifier passed to GDB
when debugging a multi-threaded userspace program. The thread ID might
wrap, but the same sort of problems with wrapping thread IDs would come
up with debugging programs natively, so this doesn't represent a
problem.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
The only target dependency for most hardware is sizeof(target_phys_addr_t).
Build these files into a convenience library, and use that instead of
building for every target.
Remove and poison various target specific macros to avoid bogus target
dependencies creeping back in.
Big/Little endian is not handled because devices should not know or care
about this to start with.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Fill in the hooks and introduce iothread.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7248 c046a42c-6fe2-441c-8c8c-71466251a162
adds a -numa command line parameter and sets a QEMU global array with
the memory sizes. The CPU-to-node assignemnt is written into the
CPUState. If no specific values for memory and CPUs are given,
all resources will be split equally across all nodes.
This code currently support only up to 64 virtual CPUs.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7210 c046a42c-6fe2-441c-8c8c-71466251a162
and process termination in legacy applications. Try to guess which we want
based on the presence of multiple threads.
Also implement locking when modifying the CPU list.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6735 c046a42c-6fe2-441c-8c8c-71466251a162
env->interrupt_request is accessed as the bit level from both main code
and signal handler, making a race condition possible even on CISC CPU.
This causes freeze of QEMU under high load when running the dyntick
clock.
The patch below move the bit corresponding to CPU_INTERRUPT_EXIT in a
separate variable, declared as volatile sig_atomic_t, so it should be
work even on RISC CPU.
We may want to move the cpu_interrupt(env, CPU_INTERRUPT_EXIT) case in
its own function and get rid of CPU_INTERRUPT_EXIT. That can be done
later, I wanted to keep the patch short for easier review.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6728 c046a42c-6fe2-441c-8c8c-71466251a162
The attached patch updates the FSF address in the GPL/LGPL boilerplate
in most GPL/LGPLed files, and also in COPYING.LIB.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
This switches cpu_break/watchpoint_* to TAILQ wrappers, simplifying the
code and also fixing a use after release issue in
cpu_break/watchpoint_remove_all.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5799 c046a42c-6fe2-441c-8c8c-71466251a162
This patch prepares the QEMU cpu_watchpoint/breakpoint API to allow the
succeeding enhancements this series comes with.
First of all, it overcomes MAX_BREAKPOINTS/MAX_WATCHPOINTS by switching
to dynamically allocated data structures that are kept in linked lists.
This also allows to return a stable reference to the related objects,
required for later introduced x86 debug register support.
Breakpoints and watchpoints are stored with their full information set
and an additional flag field that makes them easily extensible for use
beyond pure guest debugging.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5738 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds very basic KVM support. KVM is a kernel module for Linux that
allows userspace programs to make use of hardware virtualization support. It
current supports x86 hardware virtualization using Intel VT-x or AMD-V. It
also supports IA64 VT-i, PPC 440, and S390.
This patch only implements the bare minimum support to get a guest booting. It
has very little impact the rest of QEMU and attempts to integrate nicely with
the rest of QEMU.
Even though this implementation is basic, it is significantly faster than TCG.
Booting and shutting down a Linux guest:
w/TCG: 1:32.36 elapsed 84% CPU
w/KVM: 0:31.14 elapsed 59% CPU
Right now, KVM is disabled by default and must be explicitly enabled with
-enable-kvm. We can enable it by default later when we have had better
testing.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5627 c046a42c-6fe2-441c-8c8c-71466251a162
Save and restore env->interrupt_request and env->halted.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4817 c046a42c-6fe2-441c-8c8c-71466251a162
The IO index is now stored in its own field, instead of being wedged
into the vaddr field. This eliminates the ROMD and watchpoint host
pointer weirdness. The IO index space is expanded by 1 bit, and
several additional bits are made available in the TLB vaddr field.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4704 c046a42c-6fe2-441c-8c8c-71466251a162
allowing support of more than 2 mmu access modes.
Add backward compatibility is_user variable in targets code when needed.
Implement per target cpu_mmu_index function, avoiding duplicated code
and #ifdef TARGET_xxx in softmmu core functions.
Implement per target mmu modes definitions. As an example, add PowerPC
hypervisor mode definition and Alpha executive and kernel modes definitions.
Optimize PowerPC case, precomputing mmu_idx when MSR register changes
and using the same definition in code translation code.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3384 c046a42c-6fe2-441c-8c8c-71466251a162
Laurent Vivier