And remove the superfluous integer return value.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Error propagation is already there for socket backends. Add it to other
protocols, simplifying code that tests for errors that will never happen.
With all protocols understanding Error, the code can be simplified
further by removing the return value.
Unfortunately, the quality of error messages varies depending
on where the error is detected, because no Error is passed to the
NonBlockingConnectHandler. Thus, the exact error message still cannot
be sent to the user if the OS reports it asynchronously via SO_ERROR.
If NonBlockingConnectHandler received an Error**, we could for
example report the error class and/or message via a new field of the
query-migration command even if it is reported asynchronously.
Before:
(qemu) migrate fd:ffff
migrate: An undefined error has occurred
(qemu) info migrate
(qemu)
After:
(qemu) migrate fd:ffff
migrate: File descriptor named 'ffff' has not been found
(qemu) info migrate
capabilities: xbzrle: off
Migration status: failed
total time: 0 milliseconds
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes migration-unix.c again a cut-and-paste job from migration-tcp.c,
exactly as it was in the beginning. :)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We only use it once, just remove the callback indirection.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
We only used it once, just remove the callback indirection
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Change XBZRLE cache size in bytes (the size should be a power of 2, it will be
rounded down to the nearest power of 2).
If XBZRLE cache size is too small there will be many cache miss.
New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP
command to query cache value.
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In the outgoing migration check to see if the page is cached and
changed, then send compressed page by using save_xbrle_page function.
In the incoming migration check to see if RAM_SAVE_FLAG_XBZRLE is set
and decompress the page (by using load_xbrle function).
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For performance we are encoding long word at a time.
For nzrun we use long-word-at-a-time NULL-detection tricks from strcmp():
using ((lword - 0x0101010101010101) & (~lword) & 0x8080808080808080) test
to find out if any byte in the long word is zero.
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The management can query the current migration capabilities using
query-migrate-capabilities QMP command.
The user can use 'info migrate_capabilities' HMP command.
Currently only XBZRLE capability is available.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Notice that the live migration users never unregister, so no problem
about freeing the ops structure.
Signed-off-by: Juan Quintela <quintela@redhat.com>
We add time spent for migration to the output of "info migrate"
command. 'total_time' means time since the start fo migration if
migration is 'active', and total time of migration if migration is
completed. As we are also interested in transferred ram when
migration completes, adding all ram statistics
Signed-off-by: Juan Quintela <quintela@redhat.com>
Use help functions in qemu-socket.c for tcp migration,
which already support ipv6 addresses.
Currently errp will be set to UNDEFINED_ERROR when migration fails,
qemu would output "migration failed: ...", and current user can
see a message("An undefined error has occurred") in monitor.
This patch changed tcp_start_outgoing_migration()/inet_connect()
/inet_connect_opts(), socket error would be passed back,
then current user can see a meaningful err message in monitor.
Qemu will exit if listening fails, so output socket error
to qemu stderr.
For IPv6 brackets must be mandatory if you require a port.
Referencing to RFC5952, the recommended format is:
[2312::8274]:5200
test status: Successed
listen side: qemu-kvm .... -incoming tcp:[2312::8274]:5200
client side: qemu-kvm ...
(qemu) migrate -d tcp:[2312::8274]:5200
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The migrate command is one of those commands where HMP and QMP completely
mix up together. This made the conversion to the QAPI (which separates the
command into QMP and HMP parts) a bit difficult.
The first important change to be noticed is that this commit completes the
removal of the Monitor object from migration code, started by the previous
commit.
Another important and tricky change is about supporting the non-detached
mode. That is, if the user doesn't pass '-d' the migrate command will lock
the monitor and will only release it when migration is finished.
To support this in the new HMP command (hmp_migrate()), it is necessary
to create a timer which runs every second and checks if the migration is
still active. If it is, the timer callback will re-schedule itself to run
one second in the future. If the migration has already finished, the
monitor lock is released and the user can use it normally.
All these changes should be transparent to the user.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The Monitor object is passed back and forth within the migration/savevm
code so that it can print errors and progress to the user.
However, that approach assumes a HMP monitor, being completely invalid
in QMP.
This commit drops almost every single usage of the Monitor object, all
monitor_printf() calls have been converted into DPRINTF() ones.
There are a few remaining Monitor objects, those are going to be dropped
by the next commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The variable is deleted by 1bcef683bf
So remove its declaration.
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This lets different subsystems register an Error that is thrown whenever
migration is attempted. This works nicely because it gracefully supports
things like hotplug.
Right now, if multiple errors are registered, only one of them is reported.
I expect that for 1.1, we'll extend query-migrate to return all of the reasons
why migration is disabled at any given point in time.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is only used inside migration.c, and fields on that struct are
accessed all around the place on that file.
Signed-off-by: Juan Quintela <quintela@redhat.com>
We called it from a single place, and always with state !=
MIG_STATE_ACTIVE. Just remove the whole callback. For users of the
notifier, notice that this is exactly the case where they don't care,
we are just freeing the state from previous failed migration (it can't
be a sucessful one, otherwise we would not be running on that machine
in the first place).
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Use MIG_STATE_ACTIVE only when migration has really started. Use this
new state to setup migration parameters. Change defines for an
anonymous struct.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once there, remove all parameters that don't need to be passed to
*start_outgoing_migration() functions
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
I have to move two functions postions to avoid forward declarations
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds functions to register and unregister notifiers for
migration state changes and a function to query the migration state.
The notifier is called on every state change. Once after establishing a
new migration object (which is in active state then) and once when the
state changes from active to completed, canceled or error.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch makes sure that if the exec: process exits with a non-zero return
status, we treat the migration as failed.
This fixes https://bugs.launchpad.net/qemu/+bug/391879
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While there I'm also dropping a unneeded else clause (the last
one in the function).
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini