Commit Graph

8 Commits

Author SHA1 Message Date
Gerd Hoffmann 18375b5c16 ipxe: update to commit 0600d3ae94
Rebase ipxe to latest git master.
Pick up four virtio-net fixes.

complete shortlog of ipxe changes
---------------------------------

Adamczyk, Konrad (1):
      [thunderx] Use ThunderxConfigProtocol to obtain board configuration

Bartosz Szczepanek (1):
      [thunderx] Fix hardware deinitialization

Christian Nilsson (1):
      [intel] Add INTEL_NO_PHY_RST for I219-LM (2)

David Decotigny (2):
      [build] Return const char * from uuid_ntoa()
      [af_packet] Add new AF_PACKET driver for Linux

Jason Wang (1):
      [virtio] Support VIRTIO_NET_F_IOMMU_PLATFORM

Jerone Young (1):
      [intel] Add support for I219-V in 7th Gen Intel NUC

Konrad Adamczyk (1):
      [thunderx] Don't disable NIC when exiting from iPXE

Ladi Prosek (3):
      [virtio] Cap queue size to MAX_QUEUE_NUM
      [virtio] Simplify virtqueue shutdown
      [virtio] Remove queue size limit in legacy virtio

Martin Habets (1):
      [sfc] Add driver for Solarflare SFC8XXX adapters

Michael Brown (159):
      [interface] Provide intf_reinit() to reinitialise nullified interfaces
      [iscsi] Avoid potential infinite loops during shutdown
      [efi] Add basic EFI SAN booting capability
      [undi] Allocate base memory before calling UNDI loader entry point
      [romprefix] Avoid using PMM-allocated memory in UNDI loader entry point
      [undi] Clean up driver and device name information
      [prefix] Remove impossible progress message
      [prefix] Include diagnostic information within progress messages
      [undi] Try matching UNDI ROMs in BIOS enumeration order
      [efi] Work around temporal anomaly encountered during ExitBootServices()
      [ipv4] Accept unicast packets for the local network broadcast address
      [build] Add %.vhd target for building VM bootable disk images
      [virtio] Use separate RX and TX empty header buffers
      [cloud] Add ability to retrieve Google Compute Engine metadata
      [virtio] Use host-specified MTU when available
      [netdevice] Allow MTU to be changed at runtime
      [cloud] Show CPU vendor and model in example cloud boot scripts
      [hyperv] Ignore unsolicited VMBus messages
      [pic8259] Fix definitions for "read IRR" and "read ISR" commands
      [efi] Fix building elf2efi.c when -fpic is enabled by default
      [interface] Avoid unnecessary reference counting in intf_unplug()
      [interface] Remove misleading comment
      [interface] Unplug interface before calling intf_close() in intf_shutdown()
      [netdevice] Limit MTU by hardware maximum frame length
      [cpuid] Provide cpuid_supported() to test for supported functions
      [time] Allow timer to be selected at runtime
      [hyperv] Provide timer based on the 10MHz time reference count MSR
      [int13] Avoid potential division by zero
      [int13] Test correct return status from INT 13 calls
      [settings] Add "unixtime" builtin setting to expose the current time
      [time] Report attempts to use timers before initialisation
      [interface] Provide the ability to shut down multiple interfaces
      [http] Cleanly shut down potentially looped interfaces
      [efi] Add missing SANBOOT_PROTO_HTTP to EFI default configuration
      [block] Remove spurious comments
      [block] Centralise SAN device abstraction
      [block] Centralise "san-drive" setting
      [int13] Refactor to use centralised SAN device abstraction
      [efi] Refactor to use centralised SAN device abstraction
      [block] Retry any SAN device operation
      [iscsi] Use intfs_shutdown() when shutting down multiple interfaces
      [scsi] Use intfs_shutdown() when shutting down multiple interfaces
      [block] Use intfs_shutdown() when shutting down multiple interfaces
      [scsi] Avoid duplicate calls to scsicmd_close()
      [build] Provide common ARRAY_SIZE() definition
      [efi] Update to current EDK2 headers
      [efi] Add EFI_ACPI_TABLE_PROTOCOL header and GUID definition
      [efi] Provide ACPI table description for SAN devices
      [efi] Skip cable detection at initialisation where possible
      [undi] Move PXE API caller back into UNDI driver
      [dhcp] Allow vendor class to be changed in DHCP requests
      [hermon] Avoid potential integer overflow when calculating memory mappings
      [arbel] Avoid potential integer overflow when calculating memory mappings
      [xfer] Ensure va_end() is called on failure path
      [nfs] Fix double free bug on error path
      [linda] Use correct length for memset()
      [qib7322] Use correct length for memset()
      [sis900] Remove extraneous memset() with incorrect length
      [802.11] Remove redundant NULL pointer check after dereference
      [crypto] Free correct pointer on the error path
      [librm] Fail gracefully if asked to ioremap() a zero length
      [usb] Use correct length for memcpy()
      [mucurses] Attempt to fix test for empty string
      [mucurses] Attempt to fix keypress processing logic
      [mucurses] Attempt to fix resource leaks
      [hyperv] Fix resource leaks on error path
      [slam] Fix resource leak on error path
      [slam] Avoid NULL pointer dereference in slam_pull_value()
      [eoib] Avoid passing a NULL I/O buffer to netdev_tx_complete_err()
      [http] Add missing check for memory allocation failure
      [mucurses] Attempt to fix use of uninitialised buffer with strcat()
      [xhci] Avoid accessing beyond end of endpoint context array
      [build] Avoid confusing sparse in single-argument DBG() macros
      [infiniband] Return status code from ib_create_cq() and ib_create_qp()
      [infiniband] Return status code from ib_create_mi()
      [block] Quell spurious Coverity size mismatch warning
      [ath] Add missing break statements
      [pixbuf] Avoid potential division by zero
      [usb] Use correct length for memcpy()
      [xen] Use standard calling pattern for asprintf()
      [tcp] Use correct length for memset()
      [video_subr] Use memmove() for overlapping memory copy
      [arbel] Assert that mapping length is non-zero
      [hermon] Assert that mapping length is non-zero
      [tlan] Guard against failure to identify chip
      [w89c840] Avoid potential array overrun
      [sis190] Avoid NULL pointer dereference
      [mucurses] Ensure SLK labels are always terminated
      [coverity] Add Coverity user model
      [malloc] Track maximum heap usage
      [travis] Add minimal .travis.yml file
      [travis] Build and run the unit test suite
      [travis] Integrate with Coverity Scan
      [rtl818x] Fix resource leak on error path
      [pcnet32] Eliminate redundant register read
      [iobuf] Increase minimum I/O buffer size to 128 bytes
      [vxge] Fix use of stale I/O buffer on error path
      [scsi] Avoid duplicate call to scsicmd_close() on TEST UNIT READY failure
      [block] Add dummy SAN device
      [block] Add basic multipath support
      [int13] Improve geometry guessing for unaligned partitions
      [int13con] Avoid overwriting random portions of SAN boot disks
      [time] Add sleep_fixed() function to sleep without checking for Ctrl-C
      [block] Allow SAN retry count to be reconfigured
      [block] Add a small delay between attempts to reopen SAN targets
      [block] Retry reopening indefinitely for multipath devices
      [block] Gracefully close SAN device if registration fails
      [linux] Use dummy SAN device
      [block] Ignore redundant xfer_window_changed() messages
      [block] Describe all SAN devices via ACPI tables
      [iscsi] Do not install iBFT when no iSCSI targets exist
      [http] Notify data transfer interface when underlying connection is ready
      [mucurses] Fix erroneous __nonnull attribute
      [build] Avoid implicit-fallthrough warnings on GCC 7
      [linux] Fix building with kernel 4.11 headers
      [scsi] Retry TEST UNIT READY command
      [libc] Add stdbool.h standard header
      [efi] Fix typo in efi_acpi_table_protocol_guid
      [efi] Add efi_sprintf() and efi_vsprintf()
      [block] Allow use of a non-default EFI SAN boot filename
      [intel] Show original CTRL and STATUS values in debugging output
      [intel] Do not enable ASDE on i350 backplane NIC
      [block] Provide sandev_read() and sandev_write() as global symbols
      [block] Provide abstraction to allow system to be quiesced
      [hyperv] Do not fail if guest OS ID MSR is already set
      [hyperv] Remove redundant return status code from mapping functions
      [hyperv] Cope with Windows Server 2016 enlightenments
      [efi] Standardise PCI debug messages
      [iscsi] Always send FirstBurstLength parameter
      [iscsi] Fix iBFT when no explicit initiator name setting exists
      [xen] Provide 18 4kB receive buffers to work around xen-netback bug
      [efi] Prevent EFI code from being linked in to non-EFI builds
      [tls] Keep cipherstream window open until TLS negotiation is complete
      [settings] Extend numerical setting tags to 64 bits
      [acpi] Make acpi_find_rsdt() a per-platform method
      [efi] Provide access to ACPI tables
      [acpi] Expose ACPI tables via settings mechanism
      [syslog] Handle backspace characters
      [hdprefix] Avoid attempts to read beyond the end of the disk
      [usb] Allow for USB network devices with no interrupt endpoint
      [build] Use -no-pie on newer versions of gcc
      [ecm] Display invalid MAC address strings in debug messages
      [cpuid] Allow input %ecx value to be specified
      [crypto] Expose RSA_CTX_SIZE constant
      [crypto] Expose asn1_grow()
      [crypto] Provide asn1_built() to construct a cursor from a builder
      [crypto] Expose pem_asn1() for use with non-image data
      [exanic] Add driver for Exablaze ExaNIC cards
      [usb] Use non-zero language ID to retrieve strings
      [mucurses] Avoid potential division by zero
      [tls] Support RFC5746 secure renegotiation
      [smscusb] Abstract out common SMSC USB device functionality
      [smsc95xx] Use common SMSC USB device functionality
      [smsc75xx] Use common SMSC USB device functionality
      [smscusb] Add ability to read MAC address from OTP
      [smscusb] Move non-inline register access functions to smscusb.c
      [smscusb] Allow for alternative PHY register layouts
      [smsc75xx] Expose functionality shared with LAN78xx devices
      [lan78xx] Add driver for Microchip LAN78xx USB Ethernet NICs

Mika Tiainen (1):
      [intel] Add INTEL_NO_PHY_RST for I219-V

Mike McCormack (1):
      [sky2] Use 32-bit read to read Y2_VAUX_AVAIL

Raed Salem (2):
      [golan] Update Connect-IB, ConnectX-4 and ConnectX-4 Lx (Infiniband) support
      [golan] Bug fixes and improved paging allocation method

Vishvananda Ishaya (1):
      [intel] Reset all virtual function settings

Vishvananda Ishaya Abrams (1):
      [iscsi] Don't close when receiving NOP-In

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-07-17 11:00:28 +02:00
Gerd Hoffmann 423f7cf233 ipxe: update to 20161108 snapshot
git shortlog 04186319..b991c67c
===============================

Laszlo Ersek (3):
      [efi] Install the HII config access protocol on a child of the SNP handle
      [librm] Conditionalize the workaround for the Tivoli VMM's SSE garbling
      [build] Disable TIVOLI_VMM_WORKAROUND in the qemu configuration

Lukas Grossar (1):
      [intel] Add PCI device ID for I219-V/LM

Michael Brown (57):
      [efi] Fix uninitialised data in HII IFR structures
      [bios] Do not enable interrupts when printing to the console
      [pxe] Disable interrupts on the PIC before starting NBP
      [dhcp] Allow for variable encapsulation of architecture-specific options
      [dhcpv6] Include RFC5970 client architecture options in DHCPv6 requests
      [dhcpv6] Include vendor class identifier option in DHCPv6 requests
      [dhcp] Automatically generate vendor class identifier string
      [xfer] Send intf_close() if redirection fails
      [downloader] Treat redirection failures as fatal
      [iscsi] Treat redirection failures as fatal
      [debug] Allow per-object runtime enabling/disabling of debug messages
      [debug] Allow debug messages to be initially disabled at runtime
      [libc] Allow assertions to be globally enabled or disabled
      [profile] Allow profiling to be globally enabled or disabled
      [rng] Check for functioning RTC interrupt
      [acpi] Add support for ACPI power off
      [acpi] Allow time for ACPI power off to take effect
      [ipv4] Send gratuitous ARPs whenever a new IPv4 address is applied
      [intel] Strip spurious VLAN tags received by virtual function NICs
      [intel] Remove duplicate intelvf_mbox_queues() function
      [ipv6] Perform SLAAC only during autoconfiguration
      [settings] Create space for IPv6 in settings display order
      [ipv6] Rename ipv6_scope to dhcpv6_scope
      [settings] Correctly mortalise autovivified child settings blocks
      [ipv6] Allow settings to comprise arbitrary subsets of NDP options
      [ipv6] Expose IPv6 settings acquired through NDP
      [dhcpv6] Expose IPv6 address setting acquired through DHCPv6
      [ipv6] Expose IPv6 link-local address settings
      [settings] Allow settings blocks to specify a sibling ordering
      [ipv6] Match user expectations for IPv6 settings priorities
      [ipv6] Create routing table based on IPv6 settings
      [ipv6] Rename ipv6_scope to ipv6_settings_scope
      [test] Update IPv6 tests to use okx()
      [ipv6] Allow for multiple routers
      [hyperv] Use instance UUID in device name
      [crypto] Remove obsolete extern declaration for asn1_invalidate_cursor()
      [crypto] Allow for parsing of partial ASN.1 cursors
      [image] Add image_asn1() to extract ASN.1 objects from image
      [crypto] Add DER image format
      [crypto] Add PEM image format
      [image] Use image_asn1() to extract data from CMS signature images
      [build] Remove obsolete explicit object requirements
      [crypto] Enable both DER and PEM formats by default
      [build] Remove more obsolete explicit object requirements
      [pixbuf] Enable PNG format by default
      [crypto] Add image_x509() to extract X.509 certificates from image
      [crypto] Generalise X.509 "valid" field to a "flags" field
      [list] Add list_next_entry() and list_prev_entry()
      [crypto] Expose certstore_del() to explicitly remove stored certificates
      [crypto] Allow certificates to be marked as having been added explicitly
      [crypto] Add certstat() to display basic certificate information
      [cmdline] Add certificate management commands
      [crypto] Mark permanent certificates as permanent
      [efi] Mark AppleNetBoot.h as a native iPXE header
      [efi] Update to current EDK2 headers
      [efi] Add EFI_BLOCK_IO2_PROTOCOL header and GUID definition
      [bzimage] Fix page alignment of initrd images

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-11-10 15:29:43 +00:00
Gerd Hoffmann c52125ab92 ipxe: update prebuilt binaries
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-06-24 14:18:19 +02:00
Gerd Hoffmann f479832014 ipxe: update binaries
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2015-09-03 14:46:24 +02:00
Gerd Hoffmann c246cee4ee update ipxe from 69313ed to 35c5379
Anton D. Kachalov (1):
      [intel] Add 8086:1557 card (Intel 82599 10G ethernet mezz)

Christian Hesse (1):
      [build] Merge util/geniso and util/genliso

Curtis Larsen (3):
      [efi] Use EFI_CONSOLE_CONTROL_PROTOCOL to set text mode if available
      [efi] Report errors from attempting to disconnect existing drivers
      [efi] Try various possible SNP receive filters

Dale Hamel (1):
      [smbios] Expose board serial number as ${board-serial}

Florian Schmaus (1):
      [build] Set GITVERSION only if there is a git repository

Hannes Reinecke (3):
      [ethernet] Provide eth_random_addr() to generate random Ethernet addresses
      [igbvf] Assign random MAC address if none is set
      [igbvf] Allow changing of MAC address

Jan Kiszka (1):
      [intel] Add I217-LM PCI ID

Marin Hannache (4):
      [nfs] Fix an invalid free() when loading a symlink
      [nfs] Fix an invalid free() when loading a regular (non-symlink) file
      [nfs] Rewrite NFS URI handling
      [readline] Add CTRL-W shortcut to remove a word

Michael Brown (144):
      [profile] Allow interrupts to be excluded from profiling results
      [intel] Exclude time spent in hypervisor from profiling
      [build] Fix version.o dependency upon git index
      [tcp] Defer sending ACKs until all received packets have been processed
      [lkrnprefix] Function as a bzImage kernel
      [build] Avoid errors when build directory is mounted via NFS
      [undi] Apply quota only to number of complete received packets
      [lkrnprefix] Make real-mode setup code relocatable
      [intel] Increase receive ring fill level
      [syslog] Strip invalid characters from hostname
      [test] Add self-tests for strdup()
      [libc] Prevent strndup() from reading beyond the end of the string
      [efi] Allow for optional protocols
      [efi] Make EFI_DEVICE_PATH_TO_TEXT_PROTOCOL optional
      [efi] Make EFI_HII_DATABASE_PROTOCOL optional
      [efi] Do not try to fetch loaded image device path protocol
      [ipv6] Fix definition of IN6_IS_ADDR_LINKLOCAL()
      [dhcpv6] Do not set sin6_scope_id on the unspecified client socket address
      [ipv6] Do not set sin6_scope_id on source address
      [ipv6] Include network device when transcribing multicast addresses
      [ipv6] Avoid potentially copying from a NULL pointer in ipv6_tx()
      [librm] Allow for the PIC interrupt vector offset to be changed
      [ifmgmt] Do not sleep CPU while configuring network devices
      [scsi] Improve sense code parsing
      [iscsi] Read IPv4 settings only from the relevant network device
      [iscsi] Include IP address origin in iBFT
      [debug] Allow debug message colours to be customised via DBGCOL=...
      [build] Expose build timestamp, build name, and product names
      [efi] Allow device paths to be easily included in debug messages
      [efi] Provide a meaningful EFI SNP device name
      [efi] Restructure EFI driver model
      [build] Fix erroneous object name in version object
      [build] Add yet another potential location for isolinux.bin
      [efi] Allow network devices to be created on top of arbitrary SNP devices
      [autoboot] Allow autoboot device to be identified by link-layer address
      [efi] Identify autoboot device by MAC address when chainloading
      [efi] Attempt to start only drivers claiming support for a device
      [efi] Rewrite SNP NIC driver
      [efi] Include SNP NIC driver within the all-drivers target
      [crypto] Add support for iPAddress subject alternative names
      [crypto] Fix debug message
      [netdevice] Reset network device index when last device is unregistered
      [efi] Update EDK2 headers
      [efi] Install our own disk I/O protocol and claim exclusive use of it
      [efi] Allow for interception of boot services calls by loaded image
      [efi] Print well-known GUIDs by name in debug messages
      [efi] Include EFI_CONSOLE_CONTROL_PROTOCOL header
      [ioapi] Fail ioremap() when attempting to map a zero bus address
      [intel] Check for ioremap() failures
      [realtek] Check for ioremap() failures
      [vmxnet3] Check for ioremap() failures
      [skel] Check for ioremap() failures
      [myson] Check for ioremap() failures
      [natsemi] Check for ioremap() failures
      [i386] Add functions to read and write model-specific registers
      [x86_64] Add functions to read and write model-specific registers
      [efi] Show more diagnostic information when building with DEBUG=efi_wrap
      [ioapi] Centralise notion of PAGE_SIZE
      [lotest] Discard packets arriving on the incorrect network device
      [xen] Import selected public headers
      [xen] Add basic support for PV-HVM domains
      [xen] Add support for Xen netfront virtual NICs
      [efi] Default to releasing network devices for use via SNP
      [efi] Unload started images only on failure
      [efi] Fill in loaded image's DeviceHandle if firmware fails to do so
      [efi] Fix incorrect debug message level when device has no device path
      [efi] Report exact failure when unable to open the device path
      [netdevice] Avoid registering duplicate network devices
      [efi] Ignore failures when attempting to install SNP HII protocol
      [efi] Expand the range of well-known EFI GUIDs in debug messages
      [efi] Provide efi_handle_name() for debugging
      [efi] Add ability to dump all openers of a given protocol on a handle
      [efi] Use efi_handle_name() instead of efi_handle_devpath_text()
      [efi] Use efi_handle_name() instead of efi_devpath_text() where applicable
      [efi] Allow compiler to perform type checks on EFI_HANDLE
      [efi] Avoid unnecessarily passing pointers to EFI_HANDLEs
      [efi] Dump existing openers when we are unable to open a protocol
      [efi] Dump handle information around connect/disconnect attempts
      [efi] Improve debugging of the debugging facilities
      [efi] Add excessive sanity checks into efi_debug functions
      [efi] Also try original ComponentName protocol for retrieving driver names
      [efi] Print raw device path when we have no DevicePathToTextProtocol
      [efi] Add ability to dump SNP device mode information
      [efi] Reset multicast filter list when setting SNP receive filters
      [efi] Provide centralised definitions of commonly-used GUIDs
      [efi] Open device path protocol only at point of use
      [efi] Move abstract device path and handle functions to efi_utils.c
      [efi] Generalise snpnet_pci_info() to efi_locate_device()
      [bios] Support displaying and hiding cursor
      [efi] Support displaying and hiding cursor
      [readline] Ensure cursor is visible when prompting for input
      [xen] Accept alternative Xen platform PCI device ID 5853:0002
      [xen] Use version 1 grant tables by default
      [xen] Cope with unexpected initial backend states
      [smc9000] Avoid using CONFIG as a preprocessor macro
      [build] Allow for named configurations at build time
      [intel] Display PBS value when applying ICH errata workaround
      [intel] Display before and after values for both PBS and PBA
      [intel] Apply PBS/PBA errata workaround only to ICH8 PCI device IDs
      [efi] Add definitions of GUIDs observed during Windows boot
      [efi] Dump details of any calls to our dummy block and disk I/O protocols
      [romprefix] Do not preserve unused register %di
      [build] Remove obsolete references to .zrom build targets
      [build] Allow ISA ROMs to be built
      [build] Avoid deleting config header files if build is interrupted
      [prefix] Halt system without burning CPU if we cannot access the payload
      [prefix] Report both %esi and %ecx when opening payload fails
      [util] Use PCI length field to obtain length of individual images
      [mromprefix] Use PCI length field to obtain length of individual images
      [mromprefix] Allow for .mrom images larger than 128kB
      [efi] Show details of intercepted LoadImage() calls
      [efi] Make our virtual file system case insensitive
      [efi] Wrap any images loaded by our wrapped image
      [efi] Use the SNP protocol instance to match the SNP chainloading device
      [efi] Avoid returning uninitialised data from PCI configuration space reads
      [efi] Make EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL optional
      [efi] Allow for non-PCI snpnet devices
      [build] Clean up all binary directories on "make [very]clean"
      [efi] Add efifatbin utility
      [efi] Provide dummy device path in efi_image_probe()
      [dhcp] Check for matching chaddr in received DHCP packets
      [dhcp] Remove obsolete dhcp_chaddr() function
      [build] Use -malign-double to build 32-bit UEFI binaries
      [efi] Centralise definitions of more protocol GUIDs
      [efi] Add definitions of GUIDs observed when chainloading from Intel driver
      [efi] Free transmit ring entry before calling netdev_tx_complete()
      [efi] Generalise snpnet_dev_info() to efi_device_info()
      [efi] Update to current EDK2 headers
      [efi] Add NII / UNDI driver
      [efi] Check for presence of UNDI in NII protocol
      [efi] Include NII driver within "snp" and "snponly" build targets
      [ping] Report timed-out pings via the callback function
      [ping] Allow termination after a specified number of packets
      [ping] Allow "ping" command output to be inhibited
      [intel] Use autoloaded MAC address instead of EEPROM MAC address
      [crypto] Fix parsing of OCSP responder ID key hash
      [vmxnet3] Add profiling code to exclude time spent in the hypervisor
      [netdevice] Fix erroneous use of free(iobuf) instead of free_iob(iobuf)
      [libc] Add ASSERTED macro to test if any assertion has triggered
      [list] Add sanity checks after list-adding functions
      [malloc] Tidy up debug output
      [malloc] Sanity check parameters to alloc_memblock() and free_memblock()
      [malloc] Check integrity of free list
      [malloc] Report caller address as soon as memory corruption is detected

Peter Lemenkov (1):
      [build] Check if git index actually exists

Robin Smidsrød (2):
      [build] Add named configuration for VirtualBox
      [build] Avoid using embedded script in VirtualBox named configuration

Sven Ulland (1):
      [lacp] Set "aggregatable" flag in response LACPDU

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-17 14:11:39 +01:00
Gerd Hoffmann d880b28cef ipxe: update to current git
Now that ipxe has separate settings for load / boot banner timeouts
re-enable the boot banner while keeping the load banner turned off,
so we don't add a delay to non-pxe boots.

git shortlog:

Adrian Jamróz (2):
      [rhine] Rewrite VIA Rhine driver
      [velocity] Rewrite VIA Velocity driver

Alex Williamson (4):
      [romprefix] Allow ROM banner timeout to be configured independently
      [autoboot] Enable infrastructure to specify an autoboot device location
      [prefix] Allow prefix to specify a PCI autoboot device location
      [romprefix] Store boot bus:dev.fn address as autoboot device location

Alexander Chernyakhovsky (1):
      [ocsp] Handle OCSP responses that don't provide certificates

Bo Yang (1):
      [build] Avoid strict-aliasing warning for gcc 4.3

Brandon Penglase (1):
      [build] Add vmware build target

Christian Hesse (2):
      [build] Update build system for Syslinux 6.x
      [build] Fix LABEL name for .liso images

Daniel P. Berrange (1):
      [zbin] Fix size used for memset in alloc_output_file

Frediano Ziglio (1):
      [romprefix] Fix incorrect pointer offset in undiloader.S

Kevin Tran (1):
      [tg3] Fix various tg3 issues

Marin Hannache (8):
      [linux] Add missing #include <stddef.h>
      [legal] Add FILE_LICENCE for valgrind headers
      [legal] Add FILE_LICENCE for core/errno.c
      [legal] Add FILE_LICENCE for ath9k driver headers
      [legal] Add missing FILE_LICENCE declarations
      [cmdline] Add "poweroff" command
      [nfs] Add support for NFS protocol
      [nfs] Fix an issue with the selection of a local port

Michael Brown (363):
      [netdevice] Separate VLAN support from presence of VLAN-supporting drivers
      [undi] Work around specific devices with known broken interrupt behaviour
      [menu] Prevent character code zero from acting as a shortcut key
      [menu] Prevent separators with shortcut keys from being selected
      [tftp] Allow TFTP block size to be controlled via the PXE TFTP API
      [pcbios] Add extra debugging messages when unhiding iPXE from memory
      [nbiprefix] Set up real-mode stack before jumping to .text16
      [prefix] Use %cs as implicit parameter to uninstall()
      [pcbios] Inhibit all calls to INT 15,e820 and INT 15,e801 during POST
      [romprefix] Display only one "Ctrl-B" prompt per PCI device during POST
      [efi] Update to latest EDK2 headers
      [autoboot] Split main control flow out of main() into a new function ipxe()
      [efi] Add last_opened_snpdev()
      [efi] Expose downloaded images via EFI_SIMPLE_FILE_SYSTEM_PROTOCOL
      [efi] Add our own EFI_LOAD_FILE_PROTOCOL implementation
      [efi] Fix building with newer binutils
      [lkrnprefix] Allow relocation when no initrd is present
      [efi] Fix minor typos in efi_image.c
      [efi] Add EFI-specific debugging macros
      [int13] Split out ISO9660 and El Torito definitions to separate header files
      [smbios] Provide SMBIOS version number via smbios_version()
      [smbios] Mangle UUIDs for SMBIOS version 2.6 and newer
      [dhcp] Use PXE byte ordering for UUID in DHCP option 97
      [uuid] Abstract UUID mangling code out to a separate uuid_mangle() function
      [efi] Provide efi_guid_ntoa() for printing EFI GUIDs
      [efi] Add "reboot" command for EFI
      [cmdline] Add ability to perform a warm reboot
      [efi] Enable "cpuid" command by default for EFI
      [cs89x0] Remove conflicting macro definitions
      [igbvf] Remove conflicting macro definitions
      [prism2] Use standard type names
      [efi] Fetch device path for loaded image during initialisation
      [settings] Expose build architecture and platform via settings
      [bios] Fix screen clearing on buggy BIOSes
      [intel] Remove hardcoded offsets for descriptor ring registers
      [intel] Expose functionality to be shared with intelx driver
      [intel] Add intelx driver for Intel 10 Gigabit Ethernet NICs
      [efi] Remove obsolete EFI I/O implementation using EFI_CPU_IO_PROTOCOL
      [libc] Use __einfo() tuple as first argument to EUNIQ()
      [libc] Redefine low 8 bits of error code as "platform error code"
      [efi] Perform meaningful error code conversions
      [efi] Add sample platform-generated error disambiguations
      [netdevice] Use link-layer address as part of RNG seed
      [build] Allow sparse to find compiler.h
      [build] Define __WINT_TYPE__ if necessary
      [build] Allow sparse to be invoked via "make C=1"
      [build] Avoid sparse undeclared symbol warning for PROVIDE_SYMBOL()
      [process] Mark process descriptor as static in PERMANENT_PROCESS
      [realtek] Print bad MAC address in debug message when inferring no EEPROM
      [build] Use -Wno-decl when running sparse
      [build] Fix uses of literal 0 as a NULL pointer
      [build] Fix dubious uses of bitwise operators
      [build] Default to short wchar_t in stddef.h
      [realtek] Use ID word to detect EEPROM presence
      [errdb] Strip platform error code for non-platform-generated errors
      [pxe] Convert external PXE API errors into iPXE platform-generated errors
      [realtek] Allow reaction time between writing RTL_CAPR and reading RTL_CR
      [romprefix] Report failure cause when unable to open payload
      [realtek] Ensure EEPROM writes reach chip before starting udelay()
      [dhcp] Remove obsolete bootp.h header
      [netdevice] Add netdev_tx_defer() to allow drivers to defer transmissions
      [realtek] Defer packets when no transmit descriptors are available
      [settings] Eliminate settings "tag magic"
      [smbios] Allow access to unreferenced SMBIOS strings
      [smbios] Allow access to multiple instances of SMBIOS structures
      [crypto] Report meaningful error when certificate chain validation fails
      [build] Use $(eval) if available
      [build] Provide "allXXXs" targets for all media on all platforms
      [build] Add efidrv.cab target for UEFI Secure Boot signing
      [netdevice] Add "chip" setting
      [netdevice] Reset MAC address when asked to clear the "mac" setting
      [realtek] Fix reopening of legacy-mode 8139 NIC
      [crypto] Accept OCSP responses containing multiple certificates
      [bzimage] Align initrd images to page boundary
      [bzimage] Fix spurious uninitialised-variable warning on some gcc versions
      [build] Work around bug in gcc >= 4.8
      [autoboot] Use next-server from filename's settings block
      [tcp] Do not send RST for unrecognised connections
      [tcp] Fix comment to match code behaviour
      [test] Add self-tests for base16
      [base16] Generalise base16_decode() to hex_decode()
      [settings] Use hex_decode() to parse hex settings
      [settings] Add "hexraw" setting type
      [netdevice] Add "bustype" and "busloc" settings
      [settings] Add "busdevfn" setting type
      [linux] Add support for accessing PCI configuration space via /proc/bus/pci
      [settings] Add config/settings.h
      [settings] Expose PCI configuration space via settings mechanism
      [settings] Make "netX" settings block function as a symbolic link
      [cmdline] Accept "netX" in iPXE commands
      [lotest] Include sequence number within loopback test packets
      [intel] Incorporate ring producer and consumer counters in diagnostics
      [base16] Ensure base16_encode() always terminates its result string
      [realtek] Report RX error detail in debug messages
      [script] Allow for backslash continuation of script lines
      [settings] Add support for navigation keys in "config" user interface
      [realtek] Allow extra space in RX buffers
      [ifmgmt] Avoid relying on global variable within ifcommon_exec()
      [script] Avoid trying to read final character of a zero-length string
      [legal] Add missing FILE_LICENCE declarations
      [build] Fix %.licence build target
      [settings] Clarify usage of the term "named setting"
      [settings] Avoid potentially large stack allocations
      [settings] Remove temporary name buffer parameter from parse_setting_name()
      [settings] Remove default_type parameter from parse_setting_name()
      [settings] Expose parse_setting_name()
      [settings] Change "not-found" semantics of fetch_setting_copy()
      [settings] Add fetchf_setting_copy()
      [settings] Eliminate call to fetchf_named_setting() in expand_settings()
      [settings] Eliminate call to store_named_setting() in nslookup.c
      [settings] Remove now-unused store_named_setting()
      [parseopt] Allow parsed option to be modified
      [parseopt] Move parse_settings() to parseopt.c
      [parseopt] Add parse_setting()
      [settings] Eliminate call to storef_named_setting() in choose_exec()
      [settings] Eliminate calls to {fetch,store}f_named_setting() in NVO commands
      [settings] Remove now-unused fetchf_named_setting() and storef_named_setting()
      [script] Allow initial whitespace on lines containing labels
      [script] Allow commands following a script label
      [settings] Introduce the generalised concept of a numeric setting
      [cmdline] Add "inc" command
      [pci] Add pci_find_next() to iterate over existent PCI devices
      [cmdline] Add "pciscan" command to allow iteration over PCI devices
      [udp] Move high-frequency debug messages to DBGLVL_EXTRA
      [ipv6] Rename sin_{family,port} to sin6_{family,port} in struct sockaddr_in6
      [tcpip] Allow binding to unspecified privileged ports (below 1024)
      [settings] Expose CPUID instruction via settings mechanism
      [test] Add self-tests for snprintf()
      [settings] Allow numeric_setting_value() to handle long setting values
      [settings] Expose memory map via settings mechanism
      [params] Add support for the general concept of a form parameter list
      [cmdline] Add "params" and "param" commands to manage form parameter lists
      [uri] Allow URIs to incorporate a parameter list
      [http] Add support for HTTP POST
      [settings] Make built-in settings a linker table
      [linux] Give tap devices a name and bus type
      [ipv4] Generalise fragment reassembly mechanism
      [netdevice] Increase maximum network-layer address length
      [netdevice] Add concept of a network device index
      [netdevice] Add method for generating EUI-64 address from link-layer address
      [ethernet] Add support for generating multicast hash for IPv6 addresses
      [linux] Apply MAC address prior to registering network device
      [tcpip] Pass through network device to transport layer protocols
      [neighbour] Generalise concept of neighbour discovery
      [ipv4] Abstract out protocol-specific portions of "route" command
      [ipv6] Replace IPv6 stack
      [ipv6] Fix uninitialised-variable warning
      [tcp] Reduce path MTU to 1280 bytes
      [ipv6] Add inet6_aton()
      [build] Work around bug in gcc >= 4.8
      [neighbour] Add nstat() function to print out neighbour table
      [cmdline] Add "nstat" command
      [tcp] Add AF_INET6 socket opener
      [udp] Add AF_INET6 socket opener
      [netdevice] Add find_netdev_by_index()
      [socket] Add concept of a generalised socket address converter
      [ipv4] Add IPv4 socket address converter
      [ipv6] Add IPv6 socket address converter
      [resolv] Use sock_aton() to allow parsing of arbitrary numeric addresses
      [icmp] Add support for sending ICMP echo requests
      [ping] Add concept of a ping socket
      [ping] Add generic ping mechanism
      [ping] Add top-level ping() function to ping a host
      [cmdline] Add "ping" command
      [ipv6] Handle IPv6 option length correctly
      [ipv6] Extract link layer addresses from router advertisements
      [ipv6] Support stateless address autoconfiguration (SLAAC)
      [ipv6] Treat sin6_scope_id consistently
      [ipv6] Automatically choose source for link-local and multicast destinations
      [pxe] Always retrieve cached DHCPACK and apply to relevant network device
      [ipv6] Add ndp_tx_router_solicitation() to send router solicitations
      [parseopt] Add parse_timeout()
      [netdevice] Make all net_driver methods optional
      [interface] Default to calling intf_restart() in response to intf_close()
      [job] Allow job_progress() to return an ongoing job status code, if known
      [monojob] Add timeout parameter to monojob_wait()
      [monojob] Report ongoing job status as overall return status on timeout
      [cmdline] Rewrite "sync" command to use monojob_wait()
      [autoboot] Fix shell banner timeout
      [ifmgmt] Rewrite iflinkwait() to use monojob_wait()
      [cmdline] Allow "if<xxx>" commands to take options
      [netdevice] Add generic concept of a network device configurator
      [dhcp] Add DHCP network device configurator
      [parseopt] Add parse_netdev_configurator()
      [ifmgmt] Add ifconf() to carry out network device configuration
      [autoboot] Use ifconf() to configure network device
      [cmdline] Add "ifconf" command
      [cmdline] Make "dhcp" command a synonym for "ifconf"
      [dhcp] Remove obsolete dhcp() function
      [ipv6] Add IPv6 network device configurator
      [cmdline] Generate command option help text automatically
      [pxe] Ensure cached DHCPACK is retrieved prior to network device creation
      [base16] Fix comparison of signed and unsigned integers
      [settings] Move user-class setting from dhcp.c to settings.c
      [ipv6] Use given source address only if it is not the unspecified address
      [ipv6] Add "ipv6" setting type
      [dhcpv6] Add basic support for stateful and stateless DHCPv6
      [ipv6] Separate the concepts of prefix and address creation
      [dhcpv6] Allow stateful DHCPv6 to apply obtained IPv6 addresses
      [test] Include failing code within failed test result output
      [main] Defer "initialising devices" message until initialising devices
      [console] Pass escape sequence context to ANSI escape sequence handlers
      [pixbuf] Add generic concept of a pixel buffer
      [image] Allow for non-executable image formats
      [image] Add image_pixbuf() to create pixel buffer from image
      [pnm] Add support for PNM images
      [mucurses] Use "<ESC>[2J" ANSI escape sequence to clear screen
      [console] Allow console input and output to be disabled independently
      [console] Add concept of generic console configuration
      [cmdline] Add "console" command to configure console
      [fbcon] Add generic concept of a frame buffer console
      [vesafb] Add VESA frame buffer console
      [vesafb] Include raw status value within VBE error messages
      [vesafb] Skip modes for which we cannot get mode information
      [vesafb] Return meaningful error when no suitable mode is found
      [vesafb] Select an optimal mode, rather than the first acceptable mode
      [build] Fix building on OpenBSD 5.4
      [console] Allow '?' as an intermediate byte in ANSI escape sequences
      [mucurses] Implement curs_set() to control cursor visibility
      [settings] Hide cursor when not actively editing a setting
      [menu] Hide cursor when displaying menu
      [fbcon] Add support for displaying a cursor
      [settings] Explicitly separate the concept of a completed fetched setting
      [settings] Allow for IPv6 setting types in non-IPv6 builds
      [settings] Add fetch_ipv6_setting()
      [dns] Add support for resolving IPv6 addresses via AAAA records
      [socket] Ensure socket address structure sizes are fixed
      [syslog] Add support for IPv6 syslog server
      [ipv6] Add support for resolving IPv6 addresses via the "nslookup" command
      [linux] Provide access to SMBIOS via /dev/mem
      [dhcpv6] Use DUID-UUID form of client DUID
      [settings] Force settings into alphabetical order within sections
      [settings] Allow for multiple definitions of each predefined setting
      [settings] Merge SETTING_IPv4 and SETTING_IPv6
      [dhcpv6] Add DHCPv6 "filename" setting
      [ipv6] Expose NDP-provided settings (including the DNS server)
      [vesafb] Work around data corruption bug in bochs/qemu VBE implementation
      [settings] Adapt user interface to fit display size
      [login] Adapt user interface to fit display size
      [menu] Adapt user interface to fit display size
      [console] Allow consoles to update the recorded console size
      [fbcon] Update the console width and height after changing mode
      [lkrnprefix] Include iPXE version string in image header
      [fbcon] Always draw cursor using current foreground and background colours
      [console] Add centralised concept of colours and colour pairs
      [mucurses] Use centralised concept of colour pairs
      [cmdline] Add the "colour" and "cpair" commands
      [console] Add concept of a "magic" colour
      [vesafb] Set "magic" colour to transparent when a background picture is used
      [build] Remove obsolete check for GNU as version 2.9.1
      [ipv6] Fix compilation under FreeBSD
      [build] Build ROMs used by qemu and VMware as part of "make all"
      [libc] Add isprint()
      [test] Add okx() macro taking an explicit file name and line number
      [deflate] Add support for DEFLATE decompression
      [deflate] Fix literal data length calculation
      [libc] Add abs()
      [uaccess] Add memcmp_user()
      [test] Rewrite pnm_ok() using okx()
      [test] Generalise pnm_ok() to pixbuf_ok()
      [png] Add support for PNG images
      [vesafb] Handle failures from fbcon_init()
      [fbcon] Centre background picture on console
      [fbcon] Allow for an arbitrary margin around the text area
      [vesafb] Allow for an arbitrary margin around the text area
      [cmdline] Rename "console" command's --bpp option to --depth
      [cmdline] Add margin options to the "console" command
      [fbcon] Allow ANSI CUP with missing arguments
      [cmdline] Always clear screen after reconfiguring console
      [intel] Add some missing PCI IDs
      [dns] Support DNS search lists
      [dns] Update end-of-name pointer after processing CNAME record
      [dhcp] Copy exactly the required length when resizing DHCP options
      [settings] Remove "uristring" setting type
      [params] Use reference counters for form parameter lists
      [uri] Refactor URI parsing and formatting
      [image] Ensure every image has a fully resolved URI
      [tcpip] Add IP statistics collection as per RFC 4293
      [cmdline] Add the "ipstat" command
      [prefix] Ignore PCI autoboot device location if set to 00:00.0
      [tcpip] Provide tcpip_netdev() to determine the transmitting network device
      [tcpip] Provide tcpip_mtu() to determine the maximum transmission unit
      [tcp] Calculate correct MSS from peer address
      [bzimage] Report exact initrd length via bzImage header
      [realtek] Include link status register details in debug messages
      [romprefix] Do not clobber stack segment when returning to BIOS
      [netdevice] Mark devices as open before calling open() method
      [tcp] Update window even if ACK does not acknowledge new data
      [linux] Avoid starting currticks() from zero every time
      [http] Use a retry timer to trigger retried requests
      [http] Automatically retry request on a 503 Service Unavailable
      [mii] Add mii_dump() to dump all MII registers
      [realtek] Dump all MII register contents when link status changes
      [monojob] Reset timeout when progress is made
      [image] Add "--timeout" parameter to image downloading commands
      [efi] Allow for 64-bit EFI_STATUS codes
      [efi] Allow driver to be unloaded
      [efi] Connect driver to devices as part of installation
      [console] Fix display of characters with top bit set
      [lotest] Allow loopback testing on shared networks
      [netdevice] Notify upper-layer drivers when RX processing is (un)frozen
      [efi] Avoid accidentally calling main() twice
      [efi] Unload our own image before exiting UEFI application
      [efi] Disable SNP devices when running iPXE as the application
      [realtek] Add ability to dump all internal registers
      [realtek] Clear bit 24 of RCR
      [bios] Fix screen clearing on even more buggy BIOSes
      [http] Accept Content-Length header with trailing whitespace
      [crypto] Remove dynamically-allocated storage for certificate name
      [crypto] Remove dynamically-allocated storage for certificate OCSP URI
      [build] Remove long-obsolete mechanism for wrapping embedded images
      [build] Disable ccache for all relevant build targets
      [build] Add dependency of generated files upon Makefile
      [crypto] Add pubkey_match() to check for matching public/private key pairs
      [crypto] Generalise X.509 cache to a full certificate store
      [crypto] Use fingerprint when no common name is available for debug messages
      [crypto] Allow signed timestamp error margin to be configured at build time
      [test] Rewrite X.509 tests using okx()
      [test] Rewrite CMS tests using okx()
      [test] Add tests for x509_check_name()
      [test] Add subject alternative names to X.509 server test certificate
      [crypto] Add support for subjectAltName and wildcard certificates
      [crypto] Allow wildcard matches on commonName as well as subjectAltName
      [intel] Avoid completely filling the TX descriptor ring
      [test] Rewrite TCP/IP tests using okx()
      [test] Add self-tests for flsl()
      [libc] Add inline assembly implementation of flsl() using BSR instruction
      [test] Add tests for 64-bit division
      [build] Fix __libgcc attribute for recent gcc versions
      [test] Check for correct -mrtd assumption on libgcc arithmetic functions
      [libc] Add isqrt() function to find integer square roots
      [libc] Add flsll()
      [profile] Add generic profiling infrastructure
      [cmdline] Add "profstat" command to display profiling statistics
      [netdevice] Profile common operations
      [intel] Profile common virtual machine operations
      [intel] Push new RX descriptors in batches
      [librm] Use genuine real mode to accelerate operation in virtual machines
      [ipv4] Profile transmit and receive datapaths
      [tcp] Profile transmit and receive datapaths
      [http] Profile receive datapath
      [downloader] Profile receive datapath
      [build] Allow for a debug level of zero
      [librm] Allow interrupts in protected mode
      [comboot] Use built-in interrupt reflector
      [pcbios] Do not switch to real mode to check for timer interrupt
      [pcbios] Do not switch to real mode to sleep the CPU
      [test] Print out profiling statistics after a successful test run
      [librm] Add a profiling self-test for measuring mode transition times
      [librm] Add meaningful labels at section changes
      [librm] Speed up protected-to-real mode transition under KVM
      [librm] Speed up real-to-protected mode transition under KVM
      [librm] Speed up protected-mode calls under KVM
      [profile] Provide methods for profiling individual stages of operations
      [librm] Add profiling self-tests for complete real_call and prot_call cycles
      [pxe] Profile all PXE API calls
      [pxe] Profile UNDI transmit datapath
      [pxe] Work around missing PXENV_UNDI_OPEN only when necessary
      [undi] Profile all PXE API calls
      [undi] Profile transmit and receive datapaths
      [undi] Report any PXENV_UNDI_ISR errors via netdev_rx_err()
      [undi] Do not switch to real mode to check for NIC interrupt
      [undi] Place an upper limit on the number of PXENV_UNDI_ISR calls per poll

Peter Pickford (1):
      [serial] Enable UART FIFOs

Robin Smidsrød (2):
      [settings] Add "version" builtin setting
      [build] Include ipxe.pxe in default build

Stefan Hajnoczi (2):
      [netdevice] Add vlan_tag() to get the VLAN tag of a network device
      [iscsi] Include 802.1Q VLAN identifier in iBFT

Thomas Miletich (3):
      [3c90x] Stall upload engine before setting RX ring address
      [3c90x] Don't round up transmit packet length
      [3c90x] Fix High-MTU packet reception

lolipop (1):
      [intel] Add Intel I217 Gigabit Ethernet PCI ID

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-15 14:24:05 +02:00
Gerd Hoffmann 0099cd43ec ipxe: update binaries
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-25 09:13:18 +01:00
Gerd Hoffmann 8a24d3cb9b Add efi rom binaries
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18 10:21:56 +01:00