Events are broadcast to all monitors. If another monitor's client has
a command with the same ID in flight, the event will incorrectly claim
that command was dropped. This must be fixed before out-of-band
execution can graduate from "experimental".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-5-armbru@redhat.com>
OOB documentation is spread over qmp-spec.txt sections 2.2.1
Capabilities and 2.3 Issuing Commands. The amount of detail is a bit
distracting there. Move the meat of the matter to new section 2.3.1
Out of band execution.
Throw in a few other improvements while there:
* 2.2 Server Greeting: Drop advice to search entire capabilities
array; should be obvious.
* 3. QMP Examples
- 3.1 Server Greeting: Update greeting to the one we expect for the
release. Now shows capability "oob". Update qmp-intro.txt
likewise.
- 3.2 Capabilities negotiation: Show client accepting capability
"oob".
- 3.7 Out-of-band execution: New.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-4-armbru@redhat.com>
[Whitespace tidied up]
bios_support_mode verifies if the guest has support for a certain
suspend mode but it doesn't inform back which suspend tool
provides it. The caller, guest_suspend, executes all suspend
strategies in order again.
After adding systemd suspend support, bios_support_mode now will
verify for support for systemd, then pmutils, then Linux sys state
file. In a worst case scenario where both systemd and pmutils isn't
supported but Linux sys state is:
- bios_supports_mode will check for systemd, then pmutils, then
Linux sys state. It will tell guest_suspend that there is support,
but it will not tell who provides it;
- guest_suspend will try to execute (and fail) systemd suspend,
then pmutils suspend, to only then use the Linux sys suspend.
The time spent executing systemd and pmutils suspend was wasted
and could be avoided, but only bios_support_mode knew it but
didn't inform it back.
A quicker approach is to nuke bios_supports_mode and control
whether we found support at all with a bool flag inside
guest_suspend. guest_suspend will search for suspend support
and execute it as soon as possible. If the a given suspend
mechanism fails, continue to the next. If no suspend
support is found, the "not supported" message is still being
sent back to the user.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
pmutils isn't being supported by newer OSes like Fedora 27
or Mint. This means that the only suspend option QGA offers
for these guests are writing directly into the Linux sys state
file. This also means that QGA also loses the ability to do
hybrid suspend in those guests - this suspend mode is only
available when using pmutils.
Newer guests can use systemd facilities to do all the suspend
types QGA supports. The mapping in comparison with pmutils is:
- pm-hibernate -> systemctl hibernate
- pm-suspend -> systemctl suspend
- pm-suspend-hybrid -> systemctl hybrid-sleep
To discover whether systemd supports these functions, we inspect
the status of the services that implements them.
With this patch, we can offer hybrid suspend again for newer
guests that do not have pmutils support anymore.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This is a cleanup of the resulting code after detaching
pmutils and Linux sys state file logic:
- remove the SUSPEND_MODE_* macros and use an enumeration
instead. At the same time, drop the switch statements
at the start of each function and use the enumeration
index to get the right binary/argument;
- create a new function called run_process_child(). This
function uses g_spawn_sync() to execute a shell command,
returning the exit code. This is a common operation in the
pmutils functions and will be used in the systemd implementation
as well, so this function will avoid code repetition.
There are more places inside commands-posix.c where this new
run_process_child function can also be used, but one step
at a time.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
*check/propagate local_err before setting errp directly
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Following the same logic of the previous patch, let's also
decouple the suspend logic from guest_suspend into specialized
functions, one for each strategy we support at this moment.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In bios_supports_mode there is a verification to assert if
the chosen suspend mode is supported by the pmutils tools and,
if not, we see if the Linux sys state files supports it.
This verification is done in the same function, one after
the other, and it works for now. But, when adding a new
suspend mechanism that will not necessarily follow the same
return 0 or 1 logic of pmutils, this code will be hard
to deal with.
This patch decouple the two existing logics into their own
functions, pmutils_supports_mode and linux_sys_state_supports_mode,
which in turn are used inside bios_support_mode. The existing
logic is kept but now it's easier to extend it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
To be able to add new suspend mechanisms we need to detach
the existing QMP functions from the current implementation
specifics.
At this moment we have functions such as qmp_guest_suspend_ram
calling bios_suspend_mode and guest_suspend passing the
pmutils command and arguments as parameters. This patch
removes this logic from the QMP functions, moving them to
the respective functions that will have to deal with which
binary to use.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Iterate over the PCI bridges to lookup the PCI device associated with
the block device.
This allows to lookup the driver under the following syspath:
/sys/devices/pci0000:00/0000:00:02.2/0000:03:00.0/virtio2/block/vda/vda3
It also works with an "old-style" Q35 libvirt hierarchy: root complex
-> DMI-PCI bridge -> PCI-PCI bridge -> virtio controller, ex:
/sys/devices/pci0000:00/0000:00:03.0/0000:01:01.0/0000:02:01.0/virtio1/block/vda/vda3
The setup can be reproduced with the following qemu command line
(Thanks Marcel for help):
qemu-system-x86_64 -M q35 \
-device i82801b11-bridge,id=dmi2pci_bridge,bus=pcie.0
-device pci-bridge,id=pci_bridge,bus=dmi2pci_bridge,addr=0x1,chassis_nr=1
-device virtio-blk-pci,scsi=off,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1,bus=pci_bridge,addr=0x1
For consistency with other syspath-related debug messages, replace a
\"%s\" in the message with '%s'.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1567041
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Issue: When upgrading qemu-ga using the msi from an old version
to a newer one, the upgrade is not allowed by the msi
showing this error message "Another version of this product
is already installed."
BZ# 1536331: https://bugzilla.redhat.com/show_bug.cgi?id=1536331
Fix: For the upgrade to be allowed by the msi the WiX file must
provide three things:
1. Changing product's Id. (assigning it to "*")
2. Constant product's UpgradeId. (exists)
3. Changing version. (exists)
Reference: http://wixtoolset.org/documentation/manual/v3/howtos/updates/major_upgrade.html
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The documentation for kernel-version and kernel-release on Windows was
swapped.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
These commands did not get their tests in the original commits:
- guest-get-host-name
- guest-get-timezone
- guest-get-users
Trivial tests that mostly only call the commands were added.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* replace QDECREF() with qobject_unref()
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add #if defined(CONFIG_SPICE) in generated code, and adjust the
qmp/hmp code accordingly.
query-qmp-schema no longer reports the command/events etc as
available when disabled at compile time.
Commands made conditional:
* query-spice
Before the patch, the command for !CONFIG_SPICE is unregistered. It
will fail with the same error.
Events made conditional:
* SPICE_CONNECTED, SPICE_INITIALIZED, SPICE_DISCONNECTED,
SPICE_MIGRATE_COMPLETED
Add TODO for conditional SPICE chardevs, delayed until the supports
for conditional members lands.
No HMP change, the code was already conditional.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-15-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add #if defined(CONFIG_VNC) in generated code, and adjust the
qmp/hmp code accordingly.
query-qmp-schema no longer reports the command/events etc as
available when disabled at compile.
Commands made conditional:
* query-vnc, query-vnc-servers, change-vnc-password
Before the patch, the commands for !CONFIG_VNC are stubs that fail
like this:
{"error": {"class": "GenericError",
"desc": "The feature 'vnc' is not enabled"}}
Afterwards, they fail like this:
{"error": {"class": "CommandNotFound",
"desc": "The command FOO has not been found"}}
I call that an improvement, because it lets clients distinguish
between command unavailable (class CommandNotFound) and command failed
(class GenericError).
Events made conditional:
* VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED
HMP change:
* info vnc
Will return "unknown command: 'info vnc'" when VNC is compiled
out (same as error for spice when --disable-spice)
Occurrences of VNC (case insensitive) in the schema that aren't
covered by this change:
* add_client
Command has other uses, including "socket bases character devices".
These are unconditional as far as I can tell.
* set_password, expire_password
In theory, these commands could be used for managing any service's
password. In practice, they're used for VNC and SPICE services.
They're documented for "remote display session" / "remote display
server".
The service is selected by argument @protocol. The code special-cases
protocol-specific argument checking, then calls a protocol-specific
function to do the work. If it fails, the command fails with "Could
not set password". It does when the service isn't compiled in (it's a
stub then).
We could make these commands conditional on the conjunction of all
services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)],
but I doubt it's worthwhile.
* change
Command has other uses, namely changing media.
This patch inlines a stub; no functional change.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The documentation is generated only once, and doesn't know C
pre-conditions. Add 'If:' sections for top-level entities.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-13-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Types & visitors are coupled and must be handled together to avoid
temporary build regression.
Wrap generated types/visitor code with #if/#endif using the context
helpers. Derived from a patch by Marc-André.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-12-marcandre.lureau@redhat.com>
Wrap generated code with #if/#endif using an 'ifcontext' on
QAPIGenCSnippet objects.
This makes a conditional event's qapi_event_send_FOO() compile-time
conditional, but its enum QAPIEvent member remains unconditional for
now. A follow up patch "qapi-event: add 'if' condition to implicit
event enum" will improve this.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-11-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Wrap generated code with #if/#endif using an 'ifcontext' on
QAPIGenCSnippet objects.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180703155648.11933-10-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Line breaks tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This commit adds 'ifcond' conditions to top-level QLit objects.
Future work will add them to object and enum type members, i.e. within
QLit objects.
Extend the QLit generator to_qlit() to accept (@obj, @cond) tuples in
addition to just @obj. The tuple causes the QLit generated for
objects for @obj with #if/#endif conditions for @cond.
See generated tests/test-qmp-introspect.c. Example diff after this
patch:
--- before 2018-01-08 11:55:24.757083654 +0100
+++ tests/test-qmp-introspect.c 2018-01-08 13:08:44.477641629 +0100
@@ -51,6 +51,8 @@
{ "name", QLIT_QSTR("EVENT_F"), },
{}
})),
+#if defined(TEST_IF_CMD)
+#if defined(TEST_IF_STRUCT)
QLIT_QDICT(((QLitDictEntry[]) {
{ "arg-type", QLIT_QSTR("5"), },
{ "meta-type", QLIT_QSTR("command"), },
@@ -58,12 +60,16 @@
{ "ret-type", QLIT_QSTR("0"), },
{}
})),
+#endif /* defined(TEST_IF_STRUCT) */
+#endif /* defined(TEST_IF_CMD) */
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-9-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The following patch is going to break list entries with #if/#endif, so
they should have the trailing ',' as suffix.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-8-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add helpers to wrap generated code with #if/#endif lines.
A later patch wants to use QAPIGen for generating C snippets rather
than full C files with copyright headers etc. Splice in class
QAPIGenCCode between QAPIGen and QAPIGenC.
Add a 'with' statement context manager that will be used to wrap
generator visitor methods. The manager will check if code was
generated before adding #if/#endif lines on QAPIGenCSnippet
objects. Used in the following patches.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180703155648.11933-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Skip preprocessor lines when adding indentation, since that would
likely result in invalid code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-6-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Modify the test visitor to check correct passing of values.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-5-marcandre.lureau@redhat.com>
[Accidental change to roms/seabios dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We commonly initialize attributes to None in .init(), then set their
real value in .check(). Accessing the attribute before .check()
yields None. If we're lucky, the code that accesses the attribute
prematurely chokes on None.
It won't for .ifcond, because None is a legitimate value.
Leave the ifcond attribute undefined until check().
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Built-in objects remain unconditional. Explicitly defined objects use
the condition specified in the schema. Implicitly defined objects
inherit their condition from their users. For most of them, there is
exactly one user, so the condition to use is obvious. The exception
is wrapped types generated for simple union variants, which can be
shared by any number of simple unions. The tight condition would be
the disjunction of the conditions of these simple unions. For now,
use the wrapped type's condition instead. Much simpler and good
enough for now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-3-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch adds support for getting the usage of
windows driver path.
The usage of fs stored as used_bytes and total_bytes.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch adds support for getting the usage of mounted
filesystem.
The usage of fs stored as used_bytes and total_bytes.
It's very useful when we try to monitor guest's filesystem.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Accept 'if' key in top-level elements, accepted as string or list of
string type. The following patches will modify the test visitor to
check the value is correctly saved, and generate #if/#endif code (as a
single #if/endif line or a series for a list).
Example of 'if' key:
{ 'struct': 'TestIfStruct', 'data': { 'foo': 'int' },
'if': 'defined(TEST_IF_STRUCT)' }
The generated code is for now *unconditional*. Later patches generate
the conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-2-marcandre.lureau@redhat.com>
[Commit message and Documentation improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
While reading file content via 'guest-file-read' command,
'qmp_guest_file_read' routine allocates buffer of count+1
bytes. It could overflow for large values of 'count'.
Add check to avoid it.
Reported-by: Fakhri Zulkifli <mohdfakhrizulkifli@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If we set mountpoints to qmp_guest_fsfreeze_freeze_list,
we may got nothing to freeze as all mountpoints are
not valid.
So call ga_unset_frozen in this senario.
Also, if we return 0 frozen fs, there is no need to call
guest-fsfreeze-thaw.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Mostly patches from Richard Henderson fixing multiple things:
* Fix singlestepping in GDB.
* Use more TB linking.
* Fixes to exit TB after updating SPRs to enable registering of state
changes.
* Significant optimizations and refactors to the TLB
* Split out disassembly from translation.
* Add qemu-or1k to qemu-binfmt-conf.sh.
* Implement signal handling for linux-user.
Then there are a few fixups from me:
* Fix delay slot detections to match hardware, this was masking a bug
in the linus kernel.
* Fix stores to the PIC mask register
-----BEGIN PGP SIGNATURE-----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=mbu2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/shorne/tags/pull-or-20180703' into staging
OpenRISC cleanups and Fixes for QEMU 3.0
Mostly patches from Richard Henderson fixing multiple things:
* Fix singlestepping in GDB.
* Use more TB linking.
* Fixes to exit TB after updating SPRs to enable registering of state
changes.
* Significant optimizations and refactors to the TLB
* Split out disassembly from translation.
* Add qemu-or1k to qemu-binfmt-conf.sh.
* Implement signal handling for linux-user.
Then there are a few fixups from me:
* Fix delay slot detections to match hardware, this was masking a bug
in the linus kernel.
* Fix stores to the PIC mask register
# gpg: Signature made Tue 03 Jul 2018 14:44:10 BST
# gpg: using RSA key C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* remotes/shorne/tags/pull-or-20180703: (25 commits)
target/openrisc: Fix writes to interrupt mask register
target/openrisc: Fix delay slot exception flag to match spec
linux-user: Fix struct sigaltstack for openrisc
linux-user: Implement signals for openrisc
target/openrisc: Add support in scripts/qemu-binfmt-conf.sh
target/openrisc: Reorg tlb lookup
target/openrisc: Increase the TLB size
target/openrisc: Stub out handle_mmu_fault for softmmu
target/openrisc: Use identical sizes for ITLB and DTLB
target/openrisc: Fix cpu_mmu_index
target/openrisc: Fix tlb flushing in mtspr
target/openrisc: Reduce tlb to a single dimension
target/openrisc: Merge mmu_helper.c into mmu.c
target/openrisc: Remove indirect function calls for mmu
target/openrisc: Merge tlb allocation into CPUOpenRISCState
target/openrisc: Form the spr index from tcg
target/openrisc: Exit the TB after l.mtspr
target/openrisc: Split out is_user
target/openrisc: Link more translation blocks
target/openrisc: Fix singlestep_enabled
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's a last minue pull request before today's soft freeze. Ideally
I would have sent this earlier, but I was waiting for a couple of
extra fixes I knew were close. And the freeze crept up on me, like
always.
Most of the changes here are bugfixes in any case. There are some
cleanups as well, which have been in my staging tree for a little
while. There are a couple of truly new features (some extensions to
the sam460ex platform), but these are low risk, since they only affect
a new and not really stabilized machine type anyway.
Higlights are:
* Mac platform improvements from Mark Cave-Ayland
* Sam460ex improvements from BALATON Zoltan et al.
* XICS interrupt handler cleanups from Cédric Le Goater
* TCG improvements for atomic loads and stores from Richard
Henderson
* Assorted other bugfixes
-----BEGIN PGP SIGNATURE-----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=AHrx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180703' into staging
ppc patch queue 2018-07-03
Here's a last minue pull request before today's soft freeze. Ideally
I would have sent this earlier, but I was waiting for a couple of
extra fixes I knew were close. And the freeze crept up on me, like
always.
Most of the changes here are bugfixes in any case. There are some
cleanups as well, which have been in my staging tree for a little
while. There are a couple of truly new features (some extensions to
the sam460ex platform), but these are low risk, since they only affect
a new and not really stabilized machine type anyway.
Higlights are:
* Mac platform improvements from Mark Cave-Ayland
* Sam460ex improvements from BALATON Zoltan et al.
* XICS interrupt handler cleanups from Cédric Le Goater
* TCG improvements for atomic loads and stores from Richard
Henderson
* Assorted other bugfixes
# gpg: Signature made Tue 03 Jul 2018 06:55:22 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.0-20180703: (35 commits)
ppc: Include vga cirrus card into the compiling process
target/ppc: Relax reserved bitmask of indexed store instructions
target/ppc: set is_jmp on ppc_tr_breakpoint_check
spapr: compute default value of "hpt-max-page-size" later
target/ppc/kvm: don't pass cpu to kvm_get_smmu_info()
target/ppc/kvm: get rid of kvm_get_fallback_smmu_info()
ppc440_uc: Basic emulation of PPC440 DMA controller
sam460ex: Add RTC device
hw/timer: Add basic M41T80 emulation
ppc4xx_i2c: Rewrite to model hardware more closely
hw/ppc: Give sam46ex its own config option
fpu_helper.c: fix setting FPSCR[FI] bit
target/ppc: Implement the rest of gen_st_atomic
target/ppc: Implement the rest of gen_ld_atomic
target/ppc: Use atomic min/max helpers
target/ppc: Use MO_ALIGN for EXIWX and ECOWX
target/ppc: Split out gen_st_atomic
target/ppc: Split out gen_ld_atomic
target/ppc: Split out gen_load_locked
target/ppc: Tidy gen_conditional_store
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/ppc/spapr.c
The interrupt controller mask register (PICMR) allows writing any value
to any of the 32 interrupt mask bits. Writing a 0 masks the interrupt
writing a 1 unmasks (enables) the the interrupt.
For some reason the old code was or'ing the write values to the PICMR
meaning it was not possible to ever mask a interrupt once it was
enabled.
I have tested this by running linux 4.18 and my regular checks, I don't
see any issues.
Reported-by: Davidson Francis <davidsondfgl@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The delay slot exception flag is only set on the SR register during
exception. Previously it was being set on both the ESR and SR this
caused QEMU to differ from the spec. The was apparent as the linux
kernel had a bug where it could boot on QEMU but not on real hardware.
The fixed logic now matches hardware.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
All of the existing code was boilerplate from elsewhere,
and would crash the guest upon the first signal.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
---
v2:
Add a comment to the new definition of target_pt_regs.
Install the signal mask into the ucontext.
v3:
Incorporate feedback from Laurent.
While openrisc has a split i/d tlb, qemu does not. Perform a
lookup on both i & d tlbs in parallel and put the composite
rights into qemu's tlb. This avoids ping-ponging the qemu tlb
between EXEC and READ.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Pre-Shared Keys (PSK) is a simpler mechanism for enabling TLS
connections than using certificates. It requires only a simple secret
key:
$ mkdir -m 0700 /tmp/keys
$ psktool -u rjones -p /tmp/keys/keys.psk
$ cat /tmp/keys/keys.psk
rjones:d543770c15ad93d76443fb56f501a31969235f47e999720ae8d2336f6a13fcbc
The key can be secretly shared between clients and servers. Clients
must specify the directory containing the "keys.psk" file and a
username (defaults to "qemu"). Servers must specify only the
directory.
Example NBD client:
$ qemu-img info \
--object tls-creds-psk,id=tls0,dir=/tmp/keys,username=rjones,endpoint=client \
--image-opts \
file.driver=nbd,file.host=localhost,file.port=10809,file.tls-creds=tls0,file.export=/
Example NBD server using qemu-nbd:
$ qemu-nbd -t -x / \
--object tls-creds-psk,id=tls0,endpoint=server,dir=/tmp/keys \
--tls-creds tls0 \
image.qcow2
Example NBD server using nbdkit:
$ nbdkit -n -e / -fv \
--tls=on --tls-psk=/tmp/keys/keys.psk \
file file=disk.img
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Bug fixes and iotest exposure of fleecing via NBD (serving a
read-only point-in-time view via blockdev-backup sync:none,
as well as serving dirty bitmaps over NBD), including a new
x-dirty-bitmap parameter when opening NBD clients as the
counterpart to x-nbd-server-add-bitmap. Also a random fix
for iscsi block_status spotted by Coverity that missed other
miscellaneous trees.
- Eric Blake: nbd/server: Fix dirty bitmap logic regression
- Eric Blake: iscsi: Avoid potential for get_status overflow
- John Snow/Vladimir Sementsov-Ogievskiy: 0/2 block: formalize and test fleecing
- Eric Blake: 0/2 test NBD bitmap export
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJbOtJPAAoJEKeha0olJ0NqEvwH/3FwWnlBdBvdYGgPjzGE1Atm
ofCKcyxE/2VJtxeWlZQHzs1VqSq81s7am5SdzOrIWnQekvHFcLu6/71RABiauzMd
neCvVOrXOVdktj1i1Z2Gg4BgjDmqbTDlo5ssVh/oXP0Zebi6OZFfQrB7y3cGBvui
4XI7lW9qJxt6F1FlKloXnofWRDENyo5vgdz6QjQXfauthw2T5045RIPTfiz03FCp
fbs+6K0+bKxfPdNLrqxxOZo/loYnEXbDYv6VBAIWBqztXVnMHxCqnh0YN05jwsfF
TRW0/YT8lpWarOZ1soIC6a/OGXQZbxgRhZ+Zr+Wa2jw0YNHJanU9isxi37aUqQo=
=Xivx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-07-02' into staging
nbd patches for 2018-07-02
Bug fixes and iotest exposure of fleecing via NBD (serving a
read-only point-in-time view via blockdev-backup sync:none,
as well as serving dirty bitmaps over NBD), including a new
x-dirty-bitmap parameter when opening NBD clients as the
counterpart to x-nbd-server-add-bitmap. Also a random fix
for iscsi block_status spotted by Coverity that missed other
miscellaneous trees.
- Eric Blake: nbd/server: Fix dirty bitmap logic regression
- Eric Blake: iscsi: Avoid potential for get_status overflow
- John Snow/Vladimir Sementsov-Ogievskiy: 0/2 block: formalize and test fleecing
- Eric Blake: 0/2 test NBD bitmap export
# gpg: Signature made Tue 03 Jul 2018 02:33:03 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2018-07-02:
iotests: New test 223 for exporting dirty bitmap over NBD
nbd/client: Add x-dirty-bitmap to query bitmap from server
iotests: add 222 to test basic fleecing
blockdev: enable non-root nodes for backup source
iscsi: Avoid potential for get_status overflow
nbd/server: Fix dirty bitmap logic regression
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-3-armbru@redhat.com>
Affects documentation and a few error messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-2-armbru@redhat.com>
Markus Armbruster