The following handlers always succeed and hence can be converted
to cmd_new_ret() in the same commit.
- do_stop()
- do_quit()
- do_system_reset()
- do_system_powerdown()
- do_migrate_cancel()
- do_qmp_capabilities()
- do_migrate_set_speed()
- do_migrate_set_downtime()
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to implement the new error handling and debugging
mechanism for command handlers, we need to change the cmd_new()
callback to return a value.
This commit introduces cmd_new_ret(), which returns a value and
will be used only temporarily to handle the transition from
cmd_new().
That is, as soon as all command handlers are ported to cmd_new_ret(),
it will be renamed back to cmd_new() and the new error handling
and debugging mechanism will be added on top of it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QMP's chardev event callback doesn't call
json_message_parser_destroy() on CHR_EVENT_CLOSED. As the call
to json_message_parser_init() on CHR_EVENT_OPENED allocates memory,
we'are leaking on close.
Fix that by just calling json_message_parser_destroy() on
CHR_EVENT_CLOSED.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Ideally, Monitor code should report an error only once and
return the error information up the call chain.
To assure that this happens as expected and that no error is
lost, we have an assert() in qemu_error_internal().
However, we still have not fully converted handlers using
monitor_printf() to report errors. As there can be multiple
monitor_printf() calls on an error, the assertion is easily
triggered when debugging is enabled; and we will get a memory
leak if it's not.
The solution to this problem is to allow multiple faults by only
reporting the first one, and to release the additional error objects.
A better mechanism to report multiple errors to programmers is
underway.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's not needed to check the return of qobject_from_jsonf()
anymore, as an assert() has been added there.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With this commit QMP will be started in Capabilities Negotiation
mode, where the only command allowed to run is 'qmp_capabilities'.
All other commands will return CommandNotFound error. Asynchronous
messages are not delivered either.
When 'qmp_capabilities' is successfully executed QMP enters in
Command mode, where all commands (except 'qmp_capabilities') are
allowed to run and asynchronous messages are delivered.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This command will be used to enable QMP capabilities advertised
by the capabilities array.
Note that it will be mandatory to issue this command in order
to make QMP functional (although this behavior is not being
enforced by this commit).
Also, as we don't have any capabilities yet, the new command
doesn't accept any arguments. I will postpone the decision for
a format for this until we get our first capability.
Finally, this command is visible from the user Monitor too, in
the meaning that you can execute it but it won't do anything.
Making it only visible in QMP is beyond this series' goal, as
it requires changes in unrelated places.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With capability negotiation support clients will only have a chance
to check QEMU's version (ie. issue 'query-version') after the
negotiation procedure is done.
It might be useful to clients to check QEMU's version before
negotiating features, though.
To allow that, this commit adds the QEMU's version object to the
greeting message.
Not really sure this is needed, but doesn't hurt anyway.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds the basic definitions for the BLOCK_IO_ERROR
event, but actual event emission will be introduced by the
next commits.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This changes the error message from "Invalid CPU index" to "Invalid
parameter index" in the human monitor.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a double value with optional suffixes ms, us, ns. We'll need
this to get migrate_set_downtime() QMP-ready.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a double value with optional suffixes G, g, M, m, K, k. We'll
need this to get migrate_set_speed() QMP-ready.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Function is_async_return() added by commit 940cc30d0d assumes
that 'data', which is returned by handlers, is always a QDict.
This is not true, as QLists can also be returned, in this case
we'll get a segfault.
Fix that by checking if 'data' is a QDict.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When using ballooning to manage overcommitted memory on a host, a system for
guests to communicate their memory usage to the host can provide information
that will minimize the impact of ballooning on the guests. The current method
employs a daemon running in each guest that communicates memory statistics to a
host daemon at a specified time interval. The host daemon aggregates this
information and inflates and/or deflates balloons according to the level of
host memory pressure. This approach is effective but overly complex since a
daemon must be installed inside each guest and coordinated to communicate with
the host. A simpler approach is to collect memory statistics in the virtio
balloon driver and communicate them directly to the hypervisor.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Qemu has a number of commands that can operate asynchronously (savevm, migrate,
etc) and it will be getting more. For these commands, the user monitor needs
to be suspended, but QMP monitors could continue to to accept other commands.
This patch introduces a new command API that isolates the details of handling
different monitor types from the actual command execution.
A monitor command can use this API by implementing the mhandler.cmd_async
handler (or info_async if appropriate). This function is responsible for
submitting the command and does not return any data although it may raise
errors. When the command completes, the QMPCompletion callback should be
invoked with its opaque data and the command result.
The process for submitting and completing an asynchronous command is different
for QMP and user monitors. A user monitor must be suspended at submit time and
resumed at completion time. The user_print() function must be passed to the
QMPCompletion callback so the result can be displayed properly. QMP monitors
are simpler. No submit time setup is required. When the command completes,
monitor_protocol_emitter() writes the result in JSON format.
This API can also be used to implement synchronous commands. In this case, the
cmd_async handler should immediately call the QMPCompletion callback. It is my
hope that this new interface will work for all commands, leading to a
drastically simplified monitor.c once all commands are ported.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The returned QObject is a QList of all buses. Each bus is
represented by a QDict, which has a key with a QList of all
PCI devices attached to it. Each device is represented by
a QDict.
As has happended to other complex conversions, it's hard to
split this commit as part of it are new functions which are
called by each other.
IMPORTANT: support for printing PCI bridge attached devices
is NOT part of this commit, it's going to be added by the
next commit, as it's untested.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
CC i386-softmmu/monitor.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_memory_save':
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1318: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_physical_memory_save':
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1345: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result
make[1]: *** [monitor.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
mon_get_cpu() can't return null pointer, because it passes its return
value to cpu_synchronize_state() first, which crashes if its argument
is null.
Remove the (pretty cheesy) handling of this non-existing error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit f039a563f2 introduces
a regression as monitor_protocol_event() will return in
the first user Monitor it finds in the QLIST_FOREACH()
loop.
The right thing to do is to only delivery an asynchronous
event if the 'mon' is a QMP Monitor.
The aforementioned commit was an early version, if it was
applied to stable (it should) this one has to be applied
there too.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of using the field 'readonly' of the BlockDriverState struct for passing the request,
pass the request in the flags parameter to the function.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When using a control/QMP monitor in tandem with a regular monitor, asynchronous
messages can get lost depending on the order of the QEMU program arguments.
QEMU events issued by monitor_protocol_event() always go to cur_mon. If the
user monitor was specified on the command line first (or it has ,default), the
message will be directed to the user monitor (not the QMP monitor).
Additionally, only one QMP session is currently able to receive async messages.
To avoid this confusion, scan through the list of monitors and emit the message
on each QMP monitor.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's emitted when a VNC client session is activated by QEMU,
client's information such as port, IP and auth ID (if the
session is authenticated) are provided.
Event example:
{ "event": "VNC_INITIALIZED",
"timestamp": {"seconds": 1263475302, "microseconds": 150772},
"data": {
"server": { "auth": "sasl", "family": "ipv4",
"service": "5901", "host": "0.0.0.0"},
"client": { "family": "ipv4", "service": "46089",
"host": "127.0.0.1", "sasl_username": "lcapitulino" } } }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's emitted when a VNC client connects to QEMU, client's information
such as port and IP address are provided.
Note that this event is emitted right when the connection is
established. This means that it happens before authentication
procedure and session initialization.
Event example:
{ "event": "VNC_CONNECTED",
"timestamp": { "seconds": 1262976601, "microseconds": 975795 },
"data": {
"server": { "auth": "sasl", "family": "ipv4",
"service": "5901", "host": "0.0.0.0" },
"client": { "family": "ipv4", "service": "58425",
"host": "127.0.0.1" } } }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The monitor_protocol_event() function will free the
event's data, this is wrong as 'data' management is up
to the caller.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some commands return a QList of QDicts, which is valid,
but will trig the assert().
Just drop it.
Reported-by: Nathan Baum <nathan@parenthephobia.org.uk>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This makes do_balloon() accept megabyte values from the user
Monitor while accepting byte values for QMP.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a target long value in megabytes which should be
converted to bytes.
It will be used by handlers which accept a megabyte value
when in "user mode".
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, when a regular command doesn't have any data to output,
QMP will emit:
{ "return": "OK" }
Returning an empty dict is better though, because dicts can support
some protocol changes in a compatible way.
So, with this commit we will return:
{ "return": {} }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Looks like I dropped this check when addressing the 'query-'
commands request.
QMP should only handle converted commands, obviously.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows to suspend command interpretation and execution
synchronously, e.g. during migration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The monitor_vprintf() function now touches the 'mon' pointer
before calling monitor_puts(), this causes block migration
to segfault as its functions call monitor_printf() with a
NULL 'mon'.
To fix the problem this commit moves the 'mon' NULL check
from monitor_puts() to monitor_vprintf().
This can potentially hide bugs, but for some reason this has
been the behavior for a long time.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The monitor_read_command() function is readline specific
and should only be used when readline is available.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
do_balloon() should check for ballooning availability as
do_info_balloon() does.
Noted by Daniel P. Berrange <berrange@redhat.com>.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Monitor's eject command uses 'filename' for the device name
argument, but 'device' is a better name.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Return a QDict with server information. Connected clients are returned
as a QList of QDicts.
The new functions (vnc_qdict_remote_addr(), vnc_qdict_local_addr() and
put_addr_qdict()) are used to insert 'host' and 'service' information
in the returned QDict.
This patch is big, but I don't see how to split it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each device is represented by a QDict. The returned QObject is a QList
of all devices.
This commit should not change user output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each device statistic information is stored in a QDict and
the returned QObject is a QList of all devices.
This commit should not change user output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each block device information is stored in a QDict and the
returned QObject is a QList of all devices.
This commit should not change user output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Return a QDict, which may contain up to more two QDicts, depending
on the type of migration we're performing.
IMPORTANT: as a QInt stores a int64_t integer, RAM values are going
to be stored as int64_t and not as uint64_t as they are today. If
this is a problem QInt will have to be changed.
This commit should not change user output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each mouse is represented by a QDict, the returned QObject is a QList of
all mice.
This commit should not change user output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
snprintf() is used because the UUID_FMT is too complex for
qobject_from_jsonf().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All 'info' commands should use QDict, this commit also kills
monitor_print_qobject() as do_info_version() doesn't use it
anymore (and no handler will).
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While there update the documentation as well.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Should return a QDict and should not print the user protocol bits
(eg. "c|cont").
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Monitor commands should always return values in bytes and info
commands should always return a QDict.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Also affects do_change(), because the two share eject_device().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The do_cont() function will ask the user to enter a password if a
device is encrypted.
This is invalid under QMP, so we raise a QERR_DEVICE_ENCRYPTED
error.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When using encrypted disk images, QEMU will prompt the user
for passwords when started.
This makes sense for the user protocol, but doesn't for QMP.
The solution is to have Monitor command which allows the user
or a Client to set passwords in advance, so that we avoid
the prompt completely.
This is what block_passwd does, for example:
(QEMU) block_passwd ide0-hd0 foobar
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We still have handlers which will call monitor print functions
in several places. Usually to report errors.
If they do this when we are in control mode, we will be emitting
garbage to our clients.
To avoid this problem, this commit adds a way to disable those
functions. If any of them is called when in control mode, we will
emit a generic error.
Although this is far from the perfect solution, it guarantees
that only JSON is sent to Clients.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Debug, shutdown, reset, powerdown and stop are all basic events,
as they are very simple they can be added in the same commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Asynchronous events are generated with a call to
monitor_protocol_event().
This function builds the right data-type and emit the event
right away. The emitted data is always a JSON object and its
format is as follows:
{ "event": json-string,
"timestamp": { "seconds": json-number, "microseconds": json-number },
"data": json-value }
This design is based on ideas by Amit Shah <amit.shah@redhat.com>.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The 'info' command makes sense for the user protocol, but for QMP
it doesn't, as its return data is not well defined. That is, it
can return anything.
To fix this Avi proposes having 'query-' commands when in protocol
mode. For example, 'info balloon' would become 'query-balloon'.
The right way of supporting this would probably be to move all
info handlers to qemu-monitor.hx, add a flags field to mon_cmd_t
to identify them and then modify do_info() to do its search based
on that flag.
Unfortunately, this would require a big change in the Monitor.
To make things simpler for now, this commit takes a different
approach: a check for commands starting with "query-" is added to
toplevel QMP code, if it's true we setup things so that do_info()
is called with the appropriate arguments.
This is a hack, but is a temporary one and guarantees that query-
commands will work from the first day.
Also note that 'info' is not allowed in protocol mode.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The JSON stream parser is used to do QMP input. When there
are enough characters to be parsed it calls Monitor's
handle_qmp_command() function to handle the input.
This function's job is to check if the input is correct and
call the appropriate handler. In other words, it does for QMP
what handle_user_command() does for the user protocol.
This means that handle_qmp_command() also has to parse the
(ugly) "args_type" format to able to get the arguments names
and types expected by the handler.
The format to input commands in QMP is as follows:
{ "execute": json-string,
"id": json-value, "arguments": json-object }
Please, note that this commit also adds "id" support.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds specific QMP checks to do_info(), so that
it behaves as expected in QMP mode.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the new Monitor output is always performed by only two
functions: do_info() and monitor_call_handler().
To support QMP output, we modify those functions to check if we
are in control mode. If so, we call monitor_protocol_emitter()
to emit QMP output, otherwise we do regular output.
QMP has two types of responses to issued commands: success and
error. The outputed data is always a JSON object.
Success responses have the following format:
{ "return": json-value, "id": json-value }
Error responses have the following format:
{ "error": { "class": json-string,
"desc": json-string,
"data": json-value } "id": json-value }
Please, note that the "id" key is part of the input code, and
thus is not added in this commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds initial QMP support in QEMU. It's important
to notice that most QMP code will be part of the Monitor.
Input will be read by monitor_control_read(). Currently it
does nothing but next patches will add proper input support.
The function monitor_json_emitter(), as its name implies, is
used by the Monitor to emit JSON output. In this commit it's
used by monitor_control_event() to print our greeting message.
Finally, control mode support is also added to monitor_init(),
allowing QMP to be really enabled.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
List QMP available commands. Only valid in control mode, where
has to be used as 'query-commands.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As this series will add a new kind of Monitor command, it's better
to rename monitor_handle_command() to what it really is:
handle_user_command().
This will avoid confusion.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit moves the loop which searches for the command
entry corresponding to a command name to its own function.
It will be used by QMP code as well.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit moves the code which calls Monitor handlers to
its own function, as it will be used by QMP code as well.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds a flag called 'control' to the '-monitor'
command-line option. This flag enables control mode.
The syntax is:
qemu [...] -monitor control,<device>
Where <device> is a chardev (excluding 'vc', for obvious reasons).
For example:
$ qemu [...] -monitor control,tcp:localhost:4444,server
Will run QEMU in control mode, waiting for a client TCP connection
on localhost port 4444.
NOTE: I've tried using QemuOpts for this, but turns out that it
will try to parse the device part, which should be untouched.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This flag will be set when Monitor enters "control mode", in
which the output will be defined by the QEMU Monitor Protocol.
This also introduces a macro to check if the flag is set.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds QError support in the Monitor.
A QError member is added to the Monitor struct. This new member
stores error information and is also used to check if an error
has occurred when the called handler returns.
Additionally, a new macro called qemu_error_new() is introduced.
It builds on top of the QemuErrorSink API and should be used in
place of qemu_error().
When all conversion to qemu_error_new() is done, qemu_error() can
be turned private.
Basically, Monitor's error flow is something like this:
1. An error occurs in the handler, it calls qemu_error_new()
2. qemu_error_new() builds a new QError object and stores it in
the Monitor struct
3. The handler returns
4. Top level Monitor code checks the Monitor struct and calls
qerror_print() to print the error
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds the option to activate non-shared storage migration from the
monitor.
The migration command is as follows:
(qemu) migrate -d tcp:0:4444 # for ordinary live migration
(qemu) migrate -d -b tcp:0:4444 # for live migration with complete storage copy
(qemu) migrate -d -i tcp:0:4444 # for live migration with incremental storage copy, storage is cow based.
Changes from v4:
- Minor coding style issues.
Signed-off-by: Liran Schour <lirans@il.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We have code for a quite a few block formats. While I trust that all
of these formats are useful at least for some people in some
circumstances, some of them are of a kind that friends don't let
friends use in production.
This patch provides an optional block format whitelist, default off.
If a whitelist is configured with --block-drv-whitelist, QEMU proper
can use only whitelisted formats. Other programs, like qemu-img, are
not affected.
Drivers for formats off the whitelist still participate in format
probing, to ensure all programs probe exactly the same. Without that,
QEMU proper would be prone to treat images with a format off the
whitelist as raw when the image's format is probed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that errors are not being converted yet.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that errors are not being converted yet.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that errors are not being converted yet.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that errors are not being converted yet.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that errors are not being converted yet.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The char event RESET is emitted when a char device is opened.
Give it a better name.
Patchworks-ID: 35287
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each CPU information is stored in a QDict and the returned
QObject is a QList of all CPUs.
The QDict contains the following information:
- "CPU": cpu index
- "current": "yes" or "no"
- "pc": current PC
- "halted": "yes" or "no"
The user output in the Monitor should not change and the
future monitor protocol is expected to emit something like:
[ { "CPU": 0, "current": "yes", "pc": 0x..., "halted": "no" },
{ "CPU": 1, "current": "no", "pc": 0x..., "halted": "yes" } ]
which corresponds to the following user output:
* CPU #0: pc=0x00000000fffffff0
CPU #1: pc=0x00000000fffffff0 (halted)
Patchworks-ID: 35352
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On success return a QInt with the balloon's value.
This also introduces monitor_print_balloon() to print the
balloon information in the user protocol.
Please, note that errors are not being converted yet.
Patchworks-ID: 35351
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The returned data is always a QString.
Also introduces monitor_print_qobject(), which can be used as
a standard way to print QObjects in the user protocol format.
Patchworks-ID: 35350
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is important to note that it never fails, as big refactoring
of the virtio code would be needed to get the proper error code.
Patchworks-ID: 35349
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Appropriate error handling support will be needed to have
encrypted images working under the future machine protocol,
but this initial conversion will work with the current
user protocol.
Patchworks-ID: 35348
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino