As we will not have a cpu_x86_find_by_name() function anymore,
move the KVM default-vendor hack to instance_init.
Unfortunately we can't move that code to class_init because it depends
on KVM being initialized.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As eventually the x86_def_t data is going to be provided by the CPU
class, it's better to not touch it, and handle the special cases on the
X86CPU object itself.
Current behavior of the code should stay exactly the same.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The compiler is already able to eliminate the kvm_arch_get_supported_cpuid()
calls in kvm_cpu_fill_host() and filter_features_for_kvm(), so we can
eliminate the CONFIG_KVM #ifdefs there.
Also, kvm_cpu_fill_host() and host_cpuid() don't need to check
CONFIG_KVM, as they don't have any KVM-specific function calls.
Tested to build successfully with CONFIG_KVM disabled, using the
following CFLAGS combinations: "-DNDEBUG", "-DNDEBUG -O', "-DNDEBUG
-O0", "-DNDEBUG -O1", "-DNDEBUG -O2".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
http://msdn.microsoft.com/en-us/library/windows/hardware/ff541625%28v=vs.85%29.aspx
This code is generic for activating reference time counter or virtual reference time stamp counter
Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MS docs specify HV_X64_MSR_HYPERCALL as a mandatory interface,
thus we must provide the MSRs even if the user only specified
features that, like relaxed timing, in principle don't require them.
And the MSRs are only there if the hypervisor has KVM_CAP_HYPERV.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_arch_init_vcpu's initialization of the KVM leaves at 0x40000100
is broken, because KVM_CPUID_FEATURES is left at 0x40000001. Move
it to 0x40000101 if Hyper-V is enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't need the ft[] array on kvm_check_features_against_host()
anymore, as we can simply use the feature_word_info[] array, that has
everything we need.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the kvm_cpu_fill_host() code is simplified, we can simply set
the feature word array using a simple loop.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reorder the code so all the code that sets x86_cpu_def->features is at
the end of the function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check CPU xlevel2 before calling
kvm_arch_get_supported_cpuid(s, 0xC0000001, 0, R_EDX), because:
* The kernel won't return any entry for 0xC0000000 if host CPU vendor
is not Centaur (See kvm_dev_ioctl_get_supported_cpuid() on the kernel
code)
* Similarly, the kernel won't return any entry for 0xC0000001 if
CPUID[0xC0000000].EAX is < 0xC0000001
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf
For similar reasons, we can simply set x86_cpu_def->xlevel2 directly
instead of making it conditional, because it will be set to 0 CPU vendor
is not Centaur.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[Remove unparseable comment. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check CPU vendor before calling
kvm_arch_get_supported_cpuid(s, 0xC0000000, 0, R_EAX), because:
* The kernel won't return any entry for 0xC0000000 if host CPU vendor
is not Centaur (See kvm_dev_ioctl_get_cpuid() on the kernel code);
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check level (CPUID[0].EAX) before calling
kvm_arch_get_supported_cpuid(s, 0x7, 0, R_EBX), because:
* The kernel won't return any entry for CPUID 7 if CPUID[0].EAX is < 7
on the host (See kvm_dev_ioctl_get_cpuid() on the kernel code);
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Those host_cpuid() calls are useless. They are leftovers from when the
old code using host_cpuid() was removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu-kvm/uq/master:
kvm: always update the MPX model specific register
KVM: fix addr type for KVM_IOEVENTFD
KVM: Retry KVM_CREATE_VM on EINTR
mempath prefault: fix off-by-one error
kvm: x86: Separately write feature control MSR on reset
roms: Flush icache when writing roms to guest memory
target-i386: clear guest TSC on reset
target-i386: do not special case TSC writeback
target-i386: Intel MPX
Conflicts:
exec.c
aliguori: fix trivial merge conflict in exec.c
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The original patch from Liu Jinsong restricted them to reset or full
state updates, but that's unnecessary (and wrong) since the BNDCFGS
MSR has no side effects.
Cc: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reduce ifdefs, share more code between paths, reduce the number of TCG
ops generated. Avoid re-computing the size of the operation across
gen_pop_T0 and gen_pop_update.
Add forgotten zero-extension in the TARGET_X86_64, !CODE64, ss32 case.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reduce ifdefs, share more code between paths, reduce the number of TCG
ops generated.
Add forgotten zero-extension in the TARGET_X86_64, !CODE64, ss32 case.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Unlike the addr32, there was no bug. But we can use the same
technique to reduce the number of TCG ops.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Changing the domain to TCGMemOp makes it easier to interoperate
with other portions of the rest of the translator.
We now only have one domain for size operands inside the translator,
which makes things less confusing all the way around. There are
still a number of helpers that continue to use the log2-1 domain.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Change the domain of the parameter and update all callers.
Which lets us defer completely to gen_op_mov_reg_v.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Changing the domain to TCGMemOp makes it easier to interoperate
with other portions of the rest of the translator.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Change the domain of the parameter and update all callers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
These functions used the aflags/dflags domain, which is log2-1
of the byte size. Confusingly, they used enumeration values
from the log2 domain.
Change the domain of the parameter and update all callers.
Since we're now in a common domain, defer the deposit/extend/mov
decision to gen_op_mov_reg_v.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The 'ot' variables (operand type?) hold the log2(byte size) of
the operand being manipulated. This is the same as the MO_SIZE
subset of the TCGMemOp. Indeed, we often pass 'ot' to the
tcg_gen_qemu_ld/st functions.
Changing the type from 'int' makes it easier to see what domain
the variable should be.
This does require adding some default cases to some switch statements,
to avoid the 'unhandled enumeration value' warning that would result
from the change of type.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace it with tcg_gen_ext16u_tl, and in two cases merge with a
previous move from cpu_regs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace it with tcg_gen_ext16u_tl. In four places we can combine that
with a previous move into cpu_T[0], and in one place we can infer that
the zero-extension has already happened via the previous load.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Edgar E. Iglesias