Provide helpers to convert bitmaps to little endian format. It can be
used when we want to send one bitmap via network to some other hosts.
One thing to mention is that, these helpers only solve the problem of
endianess, but it does not solve the problem of different word size on
machines (the bitmaps managing same count of bits may contains different
size when malloced). So we need to take care of the size alignment issue
on the callers for now.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Count how many bits set in the bitmap.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We have BIT_WORD(). It's the same.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Convert any remaining uses of fprintf(stderr, "warning:"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i 's|fprintf(.*".*warning[,:] |warn_report("|Ig' {} +
The #include lines and chagnes to the test Makefile were manually
updated to allow the code to compile.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <2c94ac3bb116cc6b8ebbcd66a254920a69665515.1503077821.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using these commands:
find ./* -type f -exec sed -i \
'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
Indentation fixed up manually afterwards.
Some of the lines were manually edited to reduce the line length to below
80 charecters. Some of the lines with newlines in the middle of the
string were also manually edit to avoid checkpatch errrors.
The #include lines were manually updated to allow the code to compile.
Several of the warning messages can be improved after this patch, to
keep this patch mechanical this has been moved into a later patch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
util/scsi.c includes some SCSI code that is shared by block/iscsi.c and
hw/scsi, but the introduction of the persistent reservation helper
will add many more instances of this. There is also include/block/scsi.h,
which actually is not part of the core block layer.
The persistent reservation manager will also need a home. A scsi/
directory provides one for both the aforementioned shared code and
the PR manager code.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This recognizes the "fixed" and "descriptor" format sense data, extracts
the sense key/asc/ascq fields then converts them to an errno.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170821141008.19383-4-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tweak the errno mapping to return more accurate/appropriate values.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170821141008.19383-3-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So that it can be reused outside of iscsi.c.
Also update MAINTAINERS to include the new files in SCSI section.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170821141008.19383-2-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nobody has mentioned AIX host support on the mailing list for years,
and we have no test systems for it so it is most likely broken.
We've advertised in configure for two releases now that we plan
to drop support for this host OS, and have had no complaints.
Drop the AIX host support code.
We can also drop the now-unused AIX version of sys_cache_info().
Note that the _CALL_AIX define used in the PPC tcg backend is
also used for Linux PPC64, and so that code should not be removed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1504545540-8002-1-git-send-email-peter.maydell@linaro.org
ThrottleGroup is converted to an object. This will allow the future
throttle block filter drive easy creation and configuration of throttle
groups in QMP and cli.
A new QAPI struct, ThrottleLimits, is introduced to provide a shared
struct for all throttle configuration needs in QMP.
ThrottleGroups can be created via CLI as
-object throttle-group,id=foo,x-iops-total=100,x-..
where x-* are individual limit properties. Since we can't add non-scalar
properties in -object this interface must be used instead. However,
setting these properties must be disabled after initialization because
certain combinations of limits are forbidden and thus configuration
changes should be done in one transaction. The individual properties
will go away when support for non-scalar values in CLI is implemented
and thus are marked as experimental.
ThrottleGroup also has a `limits` property that uses the ThrottleLimits
struct. It can be used to create ThrottleGroups or set the
configuration in existing groups as follows:
{ "execute": "object-add",
"arguments": {
"qom-type": "throttle-group",
"id": "foo",
"props" : {
"limits": {
"iops-total": 100
}
}
}
}
{ "execute" : "qom-set",
"arguments" : {
"path" : "foo",
"property" : "limits",
"value" : {
"iops-total" : 99
}
}
}
This also means a group's configuration can be fetched with qom-get.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The non-blocking connect mechanism is obsolete, and it doesn't
work well in inet connection, because it will call getaddrinfo
first and getaddrinfo will blocks on DNS lookups. Since commit
e65c67e4 & d984464e, the non-blocking connect of migration goes
through QIOChannel in a different manner(using a thread), and
nobody use this old non-blocking connect anymore.
Any newly written code which needs a non-blocking connect should
use the QIOChannel code, so we can drop NonBlockingConnectHandler
as a concept entirely.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
If QEMU is running on a system that's out of memory and mmap()
fails, QEMU aborts with no error message at all, making it hard
to debug the reason for the failure.
Add perror() calls that will print error information before
aborting.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170829212053.6003-1-ehabkost@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
LeakyBucket.burst_length is defined as an unsigned integer but the
code never checks for overflows and it only makes sure that the value
is not 0.
In practice this means that the user can set something like
throttling.iops-total-max-length=4294967300 despite being larger than
UINT_MAX and the final value after casting to unsigned int will be 4.
This patch changes the data type to uint64_t. This does not increase
the storage size of LeakyBucket, and allows us to assign the value
directly from qemu_opt_get_number() or BlockIOThrottle and then do the
checks directly in throttle_is_valid().
The value of burst_length does not have a specific upper limit,
but since the bucket size is defined by max * burst_length we have
to prevent overflows. Instead of going for UINT64_MAX or something
similar this patch reuses THROTTLE_VALUE_MAX, which allows I/O bursts
of 1 GiB/s for 10 days in a row.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1b2e3049803f71cafb2e1fa1be4fb47147a0d398.1503580370.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Both the throttling limits set with the throttling.iops-* and
throttling.bps-* options and their QMP equivalents defined in the
BlockIOThrottle struct are integer values.
Those limits are also reported in the BlockDeviceInfo struct and they
are integers there as well.
Therefore there's no reason to store them internally as double and do
the conversion everytime we're setting or querying them, so this patch
uses uint64_t for those types. Let's also use an unsigned type because
we don't allow negative values anyway.
LeakyBucket.level and LeakyBucket.burst_level do however remain double
because their value changes depending on the fraction of time elapsed
since the previous I/O operation.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: f29b840422767b5be2c41c2dfdbbbf6c5f8fedf8.1503580370.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The throttling code can change internally the value of bkt->max if it
hasn't been set by the user. The problem with this is that if we want
to retrieve the original value we have to undo this change first. This
is ugly and unnecessary: this patch removes the throttle_fix_bucket()
and throttle_unfix_bucket() functions completely and moves the logic
to throttle_compute_wait().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Message-id: 5b0b9e1ac6eb208d709eddc7b09e7669a523bff3.1503580370.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use a pointer to the bucket instead of repeating cfg->buckets[i] all
the time. This makes the code more concise and will help us expand the
checks later and save a few line breaks.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 763ffc40a26b17d54cf93f5a999e4656049fcf0c.1503580370.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The way the throttling algorithm works is that requests start being
throttled once the bucket level exceeds the burst limit. When we get
there the bucket leaks at the level set by the user (bkt->avg), and
that leak rate is what prevents guest I/O from exceeding the desired
limit.
If we don't allow bursts (i.e. bkt->max == 0) then we can start
throttling requests immediately. The problem with keeping the
threshold at 0 is that it only allows one request at a time, and as
soon as there's a bit of I/O from the guest every other request will
be throttled and performance will suffer considerably. That can even
make the guest unable to reach the throttle limit if that limit is
high enough, and that happens regardless of the block scheduler used
by the guest.
Increasing that threshold gives flexibility to the guest, allowing it
to perform short bursts of I/O before being throttled. Increasing the
threshold too much does not make a difference in the long run (because
it's the leak rate what defines the actual throughput) but it does
allow the guest to perform longer initial bursts and exceed the
throttle limit for a short while.
A burst value of bkt->avg / 10 allows the guest to perform 100ms'
worth of I/O at the target rate without being throttled.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 31aae6645f0d1fbf3860fb2b528b757236f0c0a7.1503580370.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Build time check of OFD lock is not sufficient and can cause image open
errors when the runtime environment doesn't support it.
Add a helper function to probe it at runtime, additionally. Also provide
a qemu_has_ofd_lock() for callers to check the status.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit a59629fcc6.
This is not needed anymore because the IOThread mutex is not
"magic" anymore (need not kick the CPU thread)and also because
fork callbacks are only enabled at the very beginning of
QEMU's execution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because of -daemonize, system mode QEMU sometimes needs to fork() and
keep RCU enabled in the child. However, there is a possible deadlock
with synchronize_rcu:
- the CPU thread is inside a RCU critical section and wants to take
the BQL in order to do MMIO
- the monitor thread, which is owning the BQL, calls rcu_init_lock
which tries to take the rcu_sync_lock
- the call_rcu thread has taken rcu_sync_lock in synchronize_rcu, but
synchronize_rcu needs the CPU thread to end the critical section
before returning.
This cannot happen for user-mode emulation, because it does not have
a BQL.
To fix it, assume that system mode QEMU only forks in preparation for
exec (except when daemonizing) and disable pthread_atfork as soon as
the double fork has happened.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 97f4030 changed warning messages from
timestamp-if-enabled progname ":" location "warning: " message
to
"warning: " timestamp-if-enabled progname ":" location message
This regressed qemu-iotests 051. Put "warning: " right back where it
was, along with "info: ".
Reported-by: Kevin Wolf <kwolf@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1500449614-16811-1-git-send-email-armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Clang 3.9 passes the CONFIG_AVX2_OPT configure test. However, the
supplied <cpuid.h> does not contain the bit_AVX2 define that we use
when detecting whether the routine can be enabled.
Introduce a qemu-specific header that uses the compiler's definition
of __cpuid et al, but supplies any missing bit_* definitions needed.
This avoids introducing any extra ifdefs to util/bufferiszero.c, and
allows quite a few to be removed from tcg/i386/tcg-target.inc.c.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170719044018.18063-1-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On NetBSD the compiler warns:
util/oslib-posix.c: In function 'sigaction_invoke':
util/oslib-posix.c:589:5: warning: missing braces around initializer [-Wmissing-braces]
siginfo_t si = { 0 };
^
util/oslib-posix.c:589:5: warning: (near initialization for 'si.si_pad') [-Wmissing-braces]
because on this platform siginfo_t is defined as
typedef union siginfo {
char si_pad[128]; /* Total size; for future expansion */
struct _ksiginfo _info;
} siginfo_t;
Avoid this warning by initializing the struct with {} instead;
this is a GCC extension but we use it all over the codebase already.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1500568341-8389-1-git-send-email-peter.maydell@linaro.org
This include was forgotten when splitting cacheinfo.c out of
tcg/ppc/tcg-target.inc.c (see commit b255b2c8).
For a Centos7 host, the include path
<signal.h>
<bits/sigcontext.h>
<asm/sigcontext.h>
<asm/elf.h>
<asm/auxvec.h>
implicitly pulls in the desired AT_* defines.
Not so for Debian Jessie.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170711015524.22936-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
throttle_config() cancels the timers of the calling BlockBackend. This
doesn't make sense because other BlockBackends in the group remain
untouched. There's no need to cancel the timers in the one specific
BlockBackend so let's not do that. Throttled requests will run as
scheduled and future requests will follow the new configuration. This
also allows a throttle group's configuration to be changed even when it
has no members.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clock type in throttling is currently inferred by the ThrottleTimer's
clock type even though it is a per-ThrottleGroup property; it doesn't
make sense to have different clock types in the same group. Moving this
to a field in ThrottleGroup can simplify some of the throttle functions.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These functions are more efficient in the presence of contention.
qemu_co_rwlock_downgrade also guarantees not to block, which may
be useful in some algorithms too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-3-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Currently if you disable listening on IPv4 addresses, via the
CLI flag ipv4=off, we still mistakenly accept IPv4 clients via
the IPv6 listener socket due to IPV6_V6ONLY flag being unset.
We must ensure IPV6_V6ONLY is always set if ipv4=off
This fixes the following scenarios
-incoming tcp::9000,ipv6=on
-incoming tcp:[::]:9000,ipv6=on
-chardev socket,id=cdev0,host=,port=9000,server,nowait,ipv4=off
-chardev socket,id=cdev0,host=,port=9000,server,nowait,ipv6=on
-chardev socket,id=cdev0,host=::,port=9000,server,nowait,ipv4=off
-chardev socket,id=cdev0,host=::,port=9000,server,nowait,ipv6=on
which all mistakenly accepted IPv4 clients
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When inet_parse() parses the hostname, it is forcing the
has_ipv6 && ipv6 flags if the address contains a ":". This
means that if the user had set the ipv4=on flag, to try to
restrict the listener to just ipv4, an error would not have
been raised. eg
-incoming tcp:[::]:9000,ipv4
should have raised an error because listening for IPv4
on "::" is a non-sensical combination. With this removed,
we now call getaddrinfo() on "::" passing PF_INET and
so getaddrinfo reports an error about the hostname being
incompatible with the requested protocol:
qemu-system-x86_64: -incoming tcp:[::]:9000,ipv4: address resolution
failed for :::9000: Address family for hostname not supported
Likewise it is explicitly setting the has_ipv4 & ipv4
flags when the address contains only digits + '.'. This
has no ill-effect, but also has no benefit, so is removed.
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When binding to an IPv6 socket we currently force the
IPV6_V6ONLY flag to off. This means that the IPv6 socket
will accept both IPv4 & IPv6 sockets when QEMU is launched
with something like
-vnc :::1
While this is good for that case, it is bad for other
cases. For example if an empty hostname is given,
getaddrinfo resolves it to 2 addresses 0.0.0.0 and ::,
in that order. We will thus bind to 0.0.0.0 first, and
then fail to bind to :: on the same port. The same
problem can happen if any other hostname lookup causes
the IPv4 address to be reported before the IPv6 address.
When we get an IPv6 bind failure, we should re-try the
same port, but with IPV6_V6ONLY turned on again, to
avoid clash with any IPv4 listener.
This ensures that
-vnc :1
will bind successfully to both 0.0.0.0 and ::, and also
avoid
-vnc :1,to=2
from mistakenly using a 2nd port for the :: listener.
This is a regression due to commit 396f935 "ui: add ability to
specify multiple VNC listen addresses".
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Implement warn_report_err() and warn_reportf_err() functions which
are the same as the error_report_err() and error_reportf_err()
functions except report a warning instead of an error.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <276ff93eadc0b01b8243cc61ffc331f77922c0d0.1499866456.git.alistair.francis@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add warn_report(), warn_vreport() for reporting warnings, and
info_report(), info_vreport() for informational messages.
These are implemented them with a helper function factored out of
error_vreport(), suitably generalized. This patch makes no changes
to the output of the original error_report() function.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <c89e9980019f296ec9aa38d7689ac4d5c369296d.1499866456.git.alistair.francis@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename the error_print_loc() function in preparation for using it to
print warnings as well.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <661b215695db878a0aef8401b506fb3da50e981a.1499866456.git.alistair.francis@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add bdrv_dirty_bitmap_deserialize_ones() function, which is needed for
qcow2 bitmap loading, to handle unallocated bitmap parts, marked as
all-ones.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-7-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make dirty iter resistant to resetting bits in corresponding HBitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that qcow & qcow2 are wired up to get encryption keys
via the QCryptoSecret object, nothing is relying on the
interactive prompting for passwords. All the code related
to password prompting can thus be ripped out.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-17-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Clang generates the following warning on aarch64 host:
CC util/cacheinfo.o
/home/pranith/qemu/util/cacheinfo.c:121:48: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
asm volatile("mrs\t%0, ctr_el0" : "=r"(ctr));
^
/home/pranith/qemu/util/cacheinfo.c:121:28: note: use constraint modifier "w"
asm volatile("mrs\t%0, ctr_el0" : "=r"(ctr));
^~
%w0
Constraint modifier 'w' is not (yet?) accepted by gcc. Fix this by increasing the ctr size.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20170630153946.11997-1-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Not all platforms check whether a lock is initialized before used. In
particular Linux seems to be more permissive than OSX.
Check initialization state explicitly in our code to catch such bugs
earlier.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170704122325.25634-1-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Xu