Some devices seem to choke on receiving a USB_REQ_GET_CONFIGURATION ctrl msg
(witnessed with a digital picture frame usb id 1908:1320).
When usb_fs_type == USB_FS_SYS, the active configuration can be read directly
from sysfs, which allows using this device through qemu's usb redirection.
More in general it seems a good idea to not send needless control msg's to
devices, esp. as the code in question is called every time a set_interface
is done. Which happens multiple times during virtual machine startup, and
when device drivers are activating the usb device.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The next patch in this series introduces multiple ways to get the
configuration dependent upon usb_fs_type, it is cleaner to put this
into its own function.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows us to recreate the sysfspath used during scanning later
(which will be used in a later patch in this series).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 3c9c706c3b.
This breaks build (gcc 4.3.2):
CC usb-linux.o
cc1: warnings being treated as errors
/src/qemu/usb-linux.c: In function 'usb_linux_update_endp_table':
/src/qemu/usb-linux.c:759: error: 'type' may be used uninitialized in
this function
Reported-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The monitor_printf() reports failure. Printing is wrong, because the
caller tries various arguments, and expects the function to fail for
some or all.
Disabled since commit 26a9e82a. Remove it.
The WLAN USB stick ZyXEL NWD271N (0586:3417) uses very large
usb control transfers of more than 2048 bytes which won't fit
into the buffer of the ctrl_struct. This results in an error message
"husb: ctrl buffer too small" and a non-working device.
Increasing the buffer size to 8192 seems to be a safe choice.
Signed-off-by: Christian Krause <chkr@plauener.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
CC usb-linux.o
cc1: warnings being treated as errors
usb-linux.c: In function 'usb_host_read_file':
usb-linux.c:1204: error: ignoring return value of 'fgets', declared with attribute warn_unused_result
make: *** [usb-linux.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since commit 747bbdf7 QEMU_WARN_UNUSED_RESULT is never defined as it is
conditional on a define from config-host.h which is included only later.
Include that file earlier to get the warnings back.
Reactivating it unfortunately leads to some warnings about unused qdev_init
results. These calls are changed to qdev_init_nofail to avoid build failures.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Device names with whitespace require quoting in the shell and in the
monitor. Some of the offenders are also overly long. Some have a
more convenient alias, some don't.
The place for verbose device names is DeviceInfo member desc. The
name should be short & sweet.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Using the qdev name for the product description makes for inconvenient
qdev names.
Put the product description in new USBDeviceInfo member product_desc.
Make usb_qdev_init() use it. No user or guest visible change, since
the value is still the same.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's not a device name, it's the USB product description string.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 26a9e82a has the following flaws:
* It enabled DEBUG.
* It referenced two properties by the wrong name in
usb_host_device_open(), which crashes with "qdev_prop_set: property
"USB Host Device.bus" not found".
* It broke "-usbdevice host:auto:..." by calling parse_filter()
incorrectly.
* It broke parsing of "-usbdevice host:BUS.ADDR" and "-usbdevice
host:VID:PRID" with a trivial pasto.
* It broke wildcards in "-usbdevice host:auto:...". Before, the four
filter components were stored as int, and the wildcard was encoded
as -1. The faulty commit changed storage to uint32_t, and the
wildcard encoding to 0. But it failed to update parse_filter()
accordingly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Changes:
* We don't create/delete devices, we attach/detach them instead.
* The separate autofilter list is gone, we simply walk the list
of devices directly instead.
* Autofiltering is done unconditionally now. Non-auto device scan
code got dropped.
* Autofiltering turns off the timer if there is nothing to do, it
runs only in case there are unattached host devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
0) This is an attempt to get an issue in usb-linux.c, for which a patch
was posted about a year ago, finally fixed.
1) Mark Burkley submitted a "EHCI emulation module" for review in in
October 2008 (see:
http://lists.gnu.org/archive/html/qemu-devel/2008-10/msg01326.html). No
EHCI emulation module was ever committed to qemu.
2) Part of that (large) patch was a fix for a separate issue in
usb-linux.c. Max Krasnyansky has ACK'ed that fix (see:
http://lists.gnu.org/archive/html/qemu-devel/2008-11/msg00032.html).
3) I already asked whether this fix was ready to be committed in last
April (see:
http://lists.gnu.org/archive/html/qemu-devel/2009-04/msg01763.html)
4) Maybe submitting this fix as a separate patch (with a really long
commit message but without a Signed-off-by) and cc-ing everbody involved
will help if actually getting this issue fixed.
Paul Bolle
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
But do so only where it may actually fail. Leave the rest for the
next commit.
Patchworks-ID: 35167
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 22f84e73 added a qdev_init() missing on the path through
usb_host_device_open(), but that broke the path through
usb_host_auto_scan(), which already had one. Remove that one.
Patchworks-ID: 35169
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Changes:
* Re-add the 'dev->fd = fd;' line which the qdev patches dropped
by mistake.
* call qdev_init() so the newly created usb device is plugged into
a usb port and thus actually visible to the guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In usb-linux.c:usb_host_handle_control, we pass a 1024-byte buffer and
length to the kernel. However, the length was provided by the caller
of dev->handle_packet, and is not checked, so the kernel might provide
too much data and overflow our buffer.
For example, hw/usb-uhci.c could set the length to 2047.
hw/usb-ohci.c looks like it might go up to 4096 or 8192.
This causes a qemu crash, as reported here:
http://www.mail-archive.com/kvm@vger.kernel.org/msg18447.html
This patch increases the usb-linux.c buffer size to 2048 to fix the
specific device reported, and adds a check to avoid the overflow in
any case.
Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move usb code from vl.c to usb-bus.c and make it use the new data
structures added by qdev conversion. qemu usb core should be able
to handle multiple USB busses just fine now (untested though).
Kill some usb_*_init() legacy functions, use usb_create_simple()
instead.
Kill some FIXMEs added by the first qdev/usb patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Add USBBus.
* Add USBDeviceInfo, move device callbacks here.
* Add usb-qdev helper functions.
* Switch drivers to qdev.
TODO:
* make the rest of qemu aware of usb busses and kill the FIXMEs
added by this patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Scanning for devices via /sys/bus/usb/devices/ and using them via the
/dev/bus/usb/<bus>/<device> character devices is the prefered method
on modern kernels, so try that first.
When using SELinux and libvirt, qemu will have access to /sys/bus/usb
but not /proc/bus/usb, so although the current code will work just
fine, it will generate SELinux AVC warnings.
See also:
https://bugzilla.redhat.com/508326
Reported-by: Daniel Berrange <berrange@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add in a workaround to allow the usb serial devices to work with the
usb pass through mechanism. The ioctl() to request an alternate
interface will always return < 0 for a usb-serial device based on the
kernel driver. This means there is no alternate interface end point.
This was fully tested with a pl2303 usb serial device.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Refactor the monitor API and prepare it for decoupled terminals:
term_print functions are renamed to monitor_* and all monitor services
gain a new parameter (mon) that will once refer to the monitor instance
the output is supposed to appear on. However, the argument remains
unused for now. All monitor command callbacks are also extended by a mon
parameter so that command handlers are able to pass an appropriate
reference to monitor output services.
For the case that monitor outputs so far happen without clearly
identifiable context, the global variable cur_mon is introduced that
shall once provide a pointer either to the current active monitor (while
processing commands) or to the default one. On the mid or long term,
those use case will be obsoleted so that this variable can be removed
again.
Due to the broad usage of the monitor interface, this patch mostly deals
with converting users of the monitor API. A few of them are already
extended to pass 'mon' from the command handler further down to internal
functions that invoke monitor_printf.
At this chance, monitor-related prototypes are moved from console.h to
a new monitor.h. The same is done for the readline API.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
If the first case does not succeed, then the usb scanning code will leak file
descriptors on every scan.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5509 c046a42c-6fe2-441c-8c8c-71466251a162
Make "host:" usb devices work again on systems that have the
file /proc/bus/usb/devices. This was broken in r5441 due to
incorrect logic for the USB_FS_SYS case in usb_host_scan().
Signed-off-by: Bjorn Danielsson <bdq@dax.nu>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5507 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds support for host USB devices discovered via:
/sys/bus/usb/devices/* and opened from /dev/bus/usb/*/*
/dev/bus/usb/devices and opened from /dev/bus/usb/*/*
in addition to the existing discovery via:
/proc/bus/usb/devices and opened from /proc/bus/usb/*/*
Signed-off-by: TJ <linux@tjworld.net>
Signed-off-by: Anthony Liguori <aliguori>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5441 c046a42c-6fe2-441c-8c8c-71466251a162
They are unsafe. The current code is correct, but to be safer, we should pass
an explicit size.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5290 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds support for removing USB devices by host address.
Which is usefull for things like libvirtd because there is no easy way to
find guest USB address of the host device.
In other words you can now do:
usb_add host:3.5
...
usb_del host:3.5
Before the patch 'usb_del' did not support 'host:' notation.
----
Syntax for specifying auto connect filters has been improved.
Old syntax was
host:bus.dev
host:pid:vid
New syntax is
host:auto:bus.dev[:pid:vid]
In both the cases any attribute can be set to "*".
New syntax is more flexible and lets you do things like
host:3.*:5533:* /* grab any device on bus 3 with vendor id 5533 */
It's now possible to remove auto filters. For example:
usb_del host:auto:3.*:5533:*
Active filters are printed after all host devices in 'info usb' output.
Which now looks like this:
Device 1.1, speed 480 Mb/s
Hub: USB device 1d6b:0002, EHCI Host Controller
Device 1.4, speed 480 Mb/s
Class 00: USB device 1058:0704, External HDD
Auto filters:
Device 3.* ID *:*
Signed-off-by: Max Krasnyansky <maxk@kernel.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5205 c046a42c-6fe2-441c-8c8c-71466251a162
USB is 99.8% async now :). 0.2% is the three control requests that
we need to execute synchronously. We could off-load that to a thread
or something but it's not worth the pain since those requests are
performed only during device initialization (ie when device is
connected to the VM).
The change is a bit bigger than I wanted due to the fact that generic
handle_packet()/handle_control() interface was not designed for
async transactions. So I ended up adding custom handle_packet()
code to usb-linux. We can make that generic if/when some other
component needs it.
Signed-off-by: Max Krasnyansky <maxk@kernel.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5204 c046a42c-6fe2-441c-8c8c-71466251a162
Addressing Anthony's comments regarding printf and stuff.
Anthony, if you you want I can fold this commit and resend
the original patch.
Signed-off-by: Max Krasnyansky <maxk@kernel.org>
Signed-off-by: AnthonY Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5053 c046a42c-6fe2-441c-8c8c-71466251a162
On top of my previous USB patchset.
Async completion handler can detect device disconnects without polling.
We do not need the timer anymore.
Signed-off-by: Max Krasnyansky <maxk@kernel.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5052 c046a42c-6fe2-441c-8c8c-71466251a162
This is a follow up to the async UHCI patch. Both BULK and ISOC transactions
are now fully asynchrounous. I left CONTROL synchronous for now, ideally
we want it to be async too and it should not be that hard to do now.
This patch obviously requires UHCI patch. The combo has been tested with
various devices. See the UHCI patch description for list of the devices.
Most of the testing was done with the KVM flavor of QEMU.
Signed-off-by: Max Krasnyansky <maxk@kernel.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5051 c046a42c-6fe2-441c-8c8c-71466251a162
Hans de Goede