The 2018 edition of the QEMU advent calendar 2018 featured Linux images
for various non-x86 machines. We can use them for a boot tests in our
acceptance test suite.
Let's also make sure that we build the corresponding machines in Travis.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200124170325.30072-1-thuth@redhat.com>
[PMD: Rebased, --python=python3 parameter dropped in commit 5311cb12e]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The extract_from_rpm() method added for the PVH acceptance tests needs
rpm2cpio to extract a vmlinux binary from an RPM.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1580914565-19675-4-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200204105142.21845-1-alex.bennee@linaro.org>
I've theorised that a parallel build-tcg is somehow getting confused
when two fedora-30 based cross compilers attempt to build at the same
time. From one data-point so far this may fix the problem although the
plugins job runs quite close to timeout.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-18-alex.bennee@linaro.org>
While it shouldn't cause problems we will never get useful information
from cris as it has yet to be converted to the common translator loop.
It also causes the Travis CI to fail for weird reasons which I have so
far been unable to replicate on a normal Xenial system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-17-alex.bennee@linaro.org>
This was a crutch when we introduced it - however it does have the
disadvantage of causing tests to timeout with large amounts of logs.
Lets drop it and see if the stability has improved since.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-16-alex.bennee@linaro.org>
At least for check-tcg we can split the build phase from the test
phase and do the former in parallel. While we are at it drop the V=1
for the check-tcg part as it just generates a lot more noise in the
logs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-15-alex.bennee@linaro.org>
The arm64 hardware was especially hit by only building on 3 of the 32
available cores. Introduce a JOBS environment variable which we use
for all parallel builds. We still run the main checks single threaded
though so to make it easier to spot hangs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-12-alex.bennee@linaro.org>
We shall be adding more common early setup in a future commit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-11-alex.bennee@linaro.org>
It looks like the xenial tooling doesn't like something in our setup.
We should probably be moving to bionic for everything soon
anyway (libssh aside).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-10-alex.bennee@linaro.org>
As we require Python3 since commit ddf9069963, we don't need to
explicit it with the --python=/usr/bin/python3 configure option.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200125184217.30034-1-f4bug@amsat.org>
Message-Id: <20200203090932.19147-8-alex.bennee@linaro.org>
The genisoimage program is required for tests/cdrom-test
tests, otherwise they are skipped. The current Travis
environments do not provide it by default, so let's
explicitly require the genisoimage package.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200110191254.11303-2-wainersm@redhat.com>
Message-Id: <20200203090932.19147-5-alex.bennee@linaro.org>
Some of the CFLAGS that are discovered during configure, for example
compiler warnings, are being included on the linker command line because
QEMU_CFLAGS is added to it. Other flags, such as the -m32, appear twice
because they are included in both QEMU_CFLAGS and LDFLAGS. All this
leads to confusion with respect to what goes in which Makefile variables
(and we have plenty).
So, introduce QEMU_LDFLAGS for flags discovered by configure, following
the lead of QEMU_CFLAGS, and stop adding to it:
1) options that are already in CFLAGS, for example "-g"
2) duplicate options
At the same time, options that _are_ needed by both compiler and linker
must now be added to both QEMU_CFLAGS and QEMU_LDFLAGS, which is clearer.
This is mostly -fsanitize options. For now, --extra-cflags has this behavior
(but --extra-cxxflags does not).
Meson will not include CFLAGS on the linker command line, do the same in our
build system as well.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Our python3 requirements now outstrip those of the build. While we are
at it we can move more of the special casing for Mac into the one
build we have.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Rather than keep the hack in the global code lets "Think Different"
and have a special copy for MacOSX.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Currently build and test commands are a single step in a
Travis's `script` block. In order to see the output
of the tests one needs to scroll down the log to find where
the build messages ended and the limit is not clear. If
they were in different steps then Travis would print the
result build command, which can be easily grep'ed.
So this change is made to detach those commands
to ease the visualization of the output.
Note that all steps on the `script` block is executed regardless
if one previous has failed. To overcome it, let's save the
return code of the build then check whether succeed or failed on
the test step.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191230184327.2800-3-wainersm@redhat.com>
The acceptance tests build on Travis is configured to print
the entire Avocado's job log in case any test fail. Usually one is
interested on failed tests only though. So this change the Travis
configuration in order to show the log of tests which status is
different from 'PASS' and 'SKIP' only. Note that 'CANCEL'-ed tests
will have the log printed too because it can help to debug some
condition on CI environment which is not being fulfilled.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191230184327.2800-2-wainersm@redhat.com>
We test clang with the MAIN_SOFTMMU_TARGETS twice, once without
sanitizers and once with sanitizers enabled. That's somewhat redundant
since if compilation and tests succeeded with sanitizers enabled, it
should also work fine without sanitizers. Thus remove the clang entry
without sanitizers to speed up the CI testing a little bit.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191119092147.4260-1-thuth@redhat.com>
Most developers are using out-of-tree builds and it was discussed in the past
to only allow those. To prepare for the transition, use out-of-tree builds
in all continuous integration jobs.
Based on a patch by Marc-André Lureau.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Li-Wen Hsu <lwhsu@freebsd.org>
Message-Id: <1576074829-56711-1-git-send-email-pbonzini@redhat.com>
Travis recently added the possibility to test on these architectures,
too, so let's enable them in our travis.yml file to extend our test
coverage.
Unfortunately, the libssh in this Ubuntu version (bionic) is in a pretty
unusable Frankenstein state and libspice-server-dev is not available here,
so we can not use the global list of packages to install, but have to
provide individual package lists instead.
Also, some of the iotests crash when using "dist: bionic" on arm64
and ppc64le, thus these two builders have to use "dist: xenial" until
the problem is understood / fixed.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20191204154618.23560-8-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
So far we only have compile coverage for tci. But since commit
2f160e0f97 ("tci: Add implementation
for INDEX_op_ld16u_i64") has been included now, we can also run the
"tcg" and "qtest" tests with tci, so let's enable them in Travis now.
Since we don't gain much additional test coverage by compiling all
targets, and TCI is broken e.g. with the Sparc targets, we also limit
the target list to a reasonable subset now (which should still get us
test coverage by tests/boot-serial-test for example).
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191204083133.6198-1-thuth@redhat.com>
[AJB: just --enable-debug-tcg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Commit 7e46261368 converted virtfs-proxy-helper to using libcap-ng. There
aren't any users of libcap anymore. No need to install libcap-dev.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
It's broken so it's no longer helping. The latest Xcode is covered by
Cirrus.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191127132430.3681-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The older clangs are still struggling to build and run everything
withing the 50 minute timeout so lets lighten the load a bit more. We
still have coverage for GCC and hopefully no obscure 32 bit guest only
breakages slip through the cracks.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Let's challenge the convention that doing more at a time helps. It
certainly doesn't tell you unambiguously where in the test cycle you
were before the test hangs and exceeds the job time limit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-18-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-13-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Create a new cache for the --enable-debug-tcg builds which is separate
from the normal debug builds which generate different code. We also
enable debug-tcg for the new plugins based builds as we want to ensure
any breakage to TCG is picked up by the sanity checks.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
check-tcg will automatically run the plugins against most TCG tests if
it is enabled in the build. We exclude sparc64-linux-user for now as
there are pending patches that need to be merged fixing it's fork
implementation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This adds a whole bunch of asserts which will catch bugs you might
introduce into the TCG code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Hopefully we'll see the same benefits as the other builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
According to:
https://docs.travis-ci.com/user/reference/osx/#macos-version
we have 10.3 available so lets use it. I don't know what Apple's
deprecation policy is for Xcode because it requires an AppleID to find
out.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add a job to generate the release tarball and build/install few
QEMU targets from it.
Ideally we should build the 'efi' target from the 'roms' directory,
but it is too time consuming.
This job is only triggered when a tag starting with 'v' is pushed,
which is the case with release candidate tags.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191007160450.3619-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The "command -v ccache && ccache ..." likely were supposed to test
the availability of ccache before running the program. But this
shell construct causes Travis to abort if ccache is not available.
Use an if-statement instead to fix this problem.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191009170701.14756-5-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
libgnutls-dev and libpng12-dev are not available in newer versions
of Ubuntu anymore, so installing these packages fails e.g. in the
new arm64 containers on Travis. Let's use newer versions of these
packages by default instead. (The old versions still get tested in
the "gcc-9" build).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191009170701.14756-4-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We've removed support for SDL 1.2 quite a while ago already, so let's
use SDL 2 now in Travis to get test coverage for SDL again.
And while we're at it, also add libsdl2-image-dev which can be used
by QEMU nowadays, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191009170701.14756-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This library is needed to compile the VDE network backend.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191009170701.14756-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Adding debug makes things run a bit slower so lets not hammer all the
targets.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
So far we were not testing virtio-9p in Travis yet, since we forgot to
install libcap-devel. Do it now to get some more test coverage.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190905113346.2473-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
These jobs build different components but use the same
host features. Put them in the same cache bucket.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
These jobs build different components but use the same
host features. Put them in the same cache bucket.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
These jobs build different components but use the same
host features. Put them in the same cache bucket.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We will set the CACHE_NAME variable to improve the caching
of various jobs using the same characteristics. Document it
first.
See https://docs.travis-ci.com/user/caching/#caches-and-build-matrices
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
By default, ccache is not installed on macOS environments.
See https://docs.travis-ci.com/user/caching/#ccache-on-macos
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Per https://ccache.dev/manual/latest.html:
By default, ccache tries to give as few false cache hits as
possible. However, in certain situations it’s possible that
you know things that ccache can’t take for granted.
[The CCACHE_SLOPINESS environment variable] makes it possible
to tell ccache to relax some checks in order to increase the
hit rate.
We can relax the ctime/mtime header checks:
- include_file_ctime
By default, ccache also will not cache a file if it
includes a header whose ctime is too new. This option
disables that check.
- include_file_mtime
By default, ccache will not cache a file if it includes
a header whose mtime is too new. This option disables
that check.
We also add a call to clear the cache statistics before running
the build, and display them when the build finishes.
See https://docs.travis-ci.com/user/caching/#ccache-cache
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Avocado tests download artifacts from various sources.
These sources sometime have network issues resulting in build
failures. Cache Avocado cache to reduce build failure.
See https://docs.travis-ci.com/user/caching/#arbitrary-directories
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We always install the same packages ever and ever, cache them.
See https://docs.travis-ci.com/user/caching/#pip-cache
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Thomas Huth