qcow2_alloc_cluster_offset() and qcow2_get_cluster_offset() always
return offsets that are cluster-aligned so don't just check that they
are sector-aligned.
The check in qcow2_co_preadv_task() is also replaced by an assertion
for the same reason.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 558ba339965f858bede4c73ce3f50f0c0493597d.1579374329.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The L1 table is read from disk using the byte-based bdrv_pread() and
is never accessed beyond its last element, so there's no need to
allocate more memory than that.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: b2e27214ec7b03a585931bcf383ee1ac3a641a10.1579374329.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
According to Kevin, tests 030, 040 and 041 are among the most valuable
tests that we have, so we should always run them if possible, even if
they take a little bit longer.
According to Max, it would be good to have a test for iothreads and
migration. 127 and 256 seem to be good candidates for iothreads. For
migration, let's enable 181 and 203 (which also tests iothreads).
(091 would be a good candidate for migration, too, but Alex Bennée
reported that this test fails on ZFS file systems, so it can't be
included yet)
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-7-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to enable some of the python-based tests in the "auto" group,
and these tests require virtio-blk to work properly. Running iotests
without virtio-blk likely does not make too much sense anyway, so instead
of adding a check for the availability of virtio-blk to each and every
test (which does not sound very appealing), let's rather add a check for
this a central spot in the "check" script instead (so that it is still
possible to run "make check" for qemu-system-tricore for example).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-6-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to enable 127 in the "auto" group, but it only works if
virtio-scsi and scsi-hd are available - which is not the case with
QEMU binaries like qemu-system-tricore for example, so we need a
proper check for the availability of these devices here.
A very similar problem exists in iotest 267 - it has been added to
the "auto" group already, but requires virtio-blk and thus currently
fails with qemu-system-tricore for example. Let's also add aproper
check there.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-5-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In the long run, we might want to add test 183 to the "auto" group
(but it still fails occasionally, so we cannot do that yet). However,
when running 183 in Cirrus-CI on macOS, or with our vm-build-openbsd
target, it currently always fails with an "Timeout waiting for return
on handle 0" error.
Let's mark it as supported only on systems where the test is working
most of the time (i.e. Linux, FreeBSD and NetBSD).
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-4-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
041 works fine on Linux, FreeBSD, NetBSD and OpenBSD, but fails on macOS.
Let's mark it as only supported on the systems where we know that it is
working fine.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-3-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
verify_platform will check an explicit whitelist and blacklist instead.
The default will now be assumed to be allowed to run anywhere.
For tests that do not specify their platforms explicitly, this has the effect of
enabling these tests on non-linux platforms. For tests that always specified
linux explicitly, there is no change.
For Python tests on FreeBSD at least; only seven python tests fail:
045 147 149 169 194 199 211
045 and 149 appear to be misconfigurations,
147 and 194 are the AF_UNIX path too long error,
169 and 199 are bitmap migration bugs, and
211 is a bug that shows up on Linux platforms, too.
This is at least good evidence that these tests are not Linux-only. If
they aren't suitable for other platforms, they should be disabled on a
per-platform basis as appropriate.
Therefore, let's switch these on and deal with the failures.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20200121095205.26323-2-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is a bit more efficient than having to allocate and free memory
for each item.
The default size (60) is enough for all the existing incompatible
features or the "Unknown incompatible feature" message.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200115135626.19442-1-berto@igalia.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If we call the qmp 'query-block' while qemu is working on
'block-commit', it will cause memleaks, the memory leak stack is as
follow:
Indirect leak of 12360 byte(s) in 3 object(s) allocated from:
#0 0x7f80f0b6d970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970)
#1 0x7f80ee86049d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d)
#2 0x55ea95b5bb67 in qdict_new /mnt/sdb/qemu-4.2.0-rc0/qobject/qdict.c:29
#3 0x55ea956cd043 in bdrv_refresh_filename /mnt/sdb/qemu-4.2.0-rc0/block.c:6427
#4 0x55ea956cc950 in bdrv_refresh_filename /mnt/sdb/qemu-4.2.0-rc0/block.c:6399
#5 0x55ea956cc950 in bdrv_refresh_filename /mnt/sdb/qemu-4.2.0-rc0/block.c:6399
#6 0x55ea956cc950 in bdrv_refresh_filename /mnt/sdb/qemu-4.2.0-rc0/block.c:6399
#7 0x55ea958818ea in bdrv_block_device_info /mnt/sdb/qemu-4.2.0-rc0/block/qapi.c:56
#8 0x55ea958879de in bdrv_query_info /mnt/sdb/qemu-4.2.0-rc0/block/qapi.c:392
#9 0x55ea9588b58f in qmp_query_block /mnt/sdb/qemu-4.2.0-rc0/block/qapi.c:578
#10 0x55ea95567392 in qmp_marshal_query_block qapi/qapi-commands-block-core.c:95
Indirect leak of 4120 byte(s) in 1 object(s) allocated from:
#0 0x7f80f0b6d970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970)
#1 0x7f80ee86049d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d)
#2 0x55ea95b5bb67 in qdict_new /mnt/sdb/qemu-4.2.0-rc0/qobject/qdict.c:29
#3 0x55ea956cd043 in bdrv_refresh_filename /mnt/sdb/qemu-4.2.0-rc0/block.c:6427
#4 0x55ea956cc950 in bdrv_refresh_filename /mnt/sdb/qemu-4.2.0-rc0/block.c:6399
#5 0x55ea956cc950 in bdrv_refresh_filename /mnt/sdb/qemu-4.2.0-rc0/block.c:6399
#6 0x55ea9569f301 in bdrv_backing_attach /mnt/sdb/qemu-4.2.0-rc0/block.c:1064
#7 0x55ea956a99dd in bdrv_replace_child_noperm /mnt/sdb/qemu-4.2.0-rc0/block.c:2283
#8 0x55ea956b9b53 in bdrv_replace_node /mnt/sdb/qemu-4.2.0-rc0/block.c:4196
#9 0x55ea956b9e49 in bdrv_append /mnt/sdb/qemu-4.2.0-rc0/block.c:4236
#10 0x55ea958c3472 in commit_start /mnt/sdb/qemu-4.2.0-rc0/block/commit.c:306
#11 0x55ea94b68ab0 in qmp_block_commit /mnt/sdb/qemu-4.2.0-rc0/blockdev.c:3459
#12 0x55ea9556a7a7 in qmp_marshal_block_commit qapi/qapi-commands-block-core.c:407
Fixes: bb808d5f5c
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-id: 20200116085600.24056-1-pannengyuan@huawei.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is a bit more efficient than having to allocate and free memory
for each new permission.
The default size (30) is enough for "consistent read, write, resize".
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20200110171518.22168-1-berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The standard cluster descriptor in L2 table entries has a field to
store the host cluster offset. When we need to get that offset from an
entry we use L2E_OFFSET_MASK to ensure that we only use the bits that
belong to that field.
But while that mask is used every time we read from an L2 entry, it
is never used when we write to it. Due to the QCOW_MAX_CLUSTER_OFFSET
limit set in the cluster allocation code QEMU can never produce
offsets that don't fit in that field so any such offset would indicate
a bug in QEMU.
Compressed cluster descriptors contain two fields (host cluster offset
and size of the compressed data) and the situation with them is
similar. In this case the masks are not constant but are stored in the
csize_mask and cluster_offset_mask fields of BDRVQcow2State.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20200113161146.20099-1-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Not all ARM machines sections Cc the qemu-arm@nongnu.org list,
fix this.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200120185928.25115-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The '-i AIO' option was accidentally placed after '-n' and '-t'. Move it
after '--flush-interval'.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200205163008.204493-1-jusual@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is the only instance of a non-zero constant not using a symbolic
constant.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200204165638.25051-1-jsnow@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Modifications to default-configs/hppa-softmmu.mak should be
reviewed by the hppa-softmmu users (currently a single machine).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20200129190316.16901-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
QEMU currently crashes when the user tries to use the "vmmouse" on a
machine without vmport, e.g.:
$ x86_64-softmmu/qemu-system-x86_64 -machine microvm -device vmmouse
Segmentation fault (core dumped)
or:
$ x86_64-softmmu/qemu-system-x86_64 -device vmmouse -M pc,vmport=off
Segmentation fault (core dumped)
Let's avoid the crash by checking for the vmport device first.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20200129112954.4282-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
While removing the bluetooth code some weeks ago, I had to leave the
hw/bt/Kconfig file around. Otherwise some of the builds would have been
broken since the generated dependency files tried to include it before
they were rebuilt. Meanwhile, all those dependency files should have
been updated, so we can remove the empty Kconfig file now, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200123064525.6935-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When remove dup_fd in monitor_fdset_dup_fd_find_remove function,
we need to free mon_fdset_fd_dup. ASAN shows memory leak stack:
Direct leak of 96 byte(s) in 3 object(s) allocated from:
#0 0xfffd37b033b3 in __interceptor_calloc (/lib64/libasan.so.4+0xd33b3)
#1 0xfffd375c71cb in g_malloc0 (/lib64/libglib-2.0.so.0+0x571cb)
#2 0xaaae25bf1c17 in monitor_fdset_dup_fd_add /qemu/monitor/misc.c:1724
#3 0xaaae265cfd8f in qemu_open /qemu/util/osdep.c:315
#4 0xaaae264e2b2b in qmp_chardev_open_file_source /qemu/chardev/char-fd.c:122
#5 0xaaae264e47cf in qmp_chardev_open_file /qemu/chardev/char-file.c:81
#6 0xaaae264e118b in qemu_char_open /qemu/chardev/char.c:237
#7 0xaaae264e118b in qemu_chardev_new /qemu/chardev/char.c:964
#8 0xaaae264e1543 in qemu_chr_new_from_opts /qemu/chardev/char.c:680
#9 0xaaae25e12e0f in chardev_init_func /qemu/vl.c:2083
#10 0xaaae26603823 in qemu_opts_foreach /qemu/util/qemu-option.c:1170
#11 0xaaae258c9787 in main /qemu/vl.c:4089
#12 0xfffd35b80b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
#13 0xaaae258d7b63 (/qemu/build/aarch64-softmmu/qemu-system-aarch64+0x8b7b63)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200115072016.167252-1-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Nothing from "sysemu/cpus.h" is used by smbios.c, remove the include.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200109112504.32622-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The option was deprecated in 4.0.0 (commit 0ae2d546); it's now been
long enough with no complaints to follow through with that process.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200123164650.1741798-3-eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The suggested replacement for the deprecated 'qemu-nbd -P' refers to
'file.backing.opt' instead of 'file.file.opt'; using the example
verbatim results in:
qemu-nbd: Failed to blk_new_open 'driver=raw,offset=1m,size=100m,file.driver=qcow2,file.backing.driver=file,file.backing.filename=file4': A block device must be specified for "file"
Correct this text, prior to actually finishing the deprecation process.
Fixes: 0ae2d54645
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200123164650.1741798-2-eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow blockdevs to match the feature already present in qemu-nbd -D.
Enhance iotest 223 to cover it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191114024635.11363-5-eblake@redhat.com>
- move more cross compilers to buster
- fix build breakage (hppa Kconfig)
- disable docs on shippable
- build docs under bionic with python3
- travis.yml re-factoring
- check capabilities of non-docker compilers
- smarter make -j parallelism
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl45pvgACgkQ+9DbCVqe
KkQulAf/W+nrxv+7Q+xwyZOv6d1V2cfJRmgxUrH3fXePBGVGmhoCF9zDRfUeidUH
Ab9Les0O9E3XTRcobiwOCEG0iTUT3yFiO76V0D+hY9GH41SvrB943LVAsAVnM/eM
PRFeUM1BqE+hs6b/ByIfqdkrcnSS9xgIdYEF2MryR4azemR0R901rBlS+jsk8yAV
Nv9SAmNZv3oG/oWVXLk9+5dNjw6OqVvmEFPO1pr5AFyt7k2wvxoYD2iVMLYPvJX9
jfx1YP2UlqnMQ7VNOVuAtv8ROw2IZoQpoCtXP+1cs9N5n4VtQo7QxCNn6WVT0UpA
DY4DuDyK75ZgHhhEiJBbZfavona6fQ==
=P3ap
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-040220-1' into staging
Testing updates and build fixes:
- move more cross compilers to buster
- fix build breakage (hppa Kconfig)
- disable docs on shippable
- build docs under bionic with python3
- travis.yml re-factoring
- check capabilities of non-docker compilers
- smarter make -j parallelism
# gpg: Signature made Tue 04 Feb 2020 17:16:40 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-040220-1:
.travis.yml: ensure python3-sphinx installed for docs
.travis.yml: single thread build-tcg
.travis.yml: drop cris-linux-user from the plugins test
.travis.yml: drop the travis_retry from tests
.travis.yml: introduce TEST_BUILD_CMD and use it for check-tcg
tests/tcg: gate pauth-% tests on having compiler support
tests/tcg: add a configure compiler check for ARMv8.1 and SVE
.travis.yml: probe for number of available processors
.travis.yml: move cache flushing to early common phase
.travis.yml: build documents under bionic
.travis.yml: Add description to each job
.travis.yml: Drop superfluous use of --python=python3 parameter
.shippable: --disable-docs for cross-compile tests
travis.yml: Install genisoimage package
tests/docker: better handle symlinked libs
tests/docker: move most cross compilers to buster base
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200204105142.21845-1-alex.bennee@linaro.org>
I've theorised that a parallel build-tcg is somehow getting confused
when two fedora-30 based cross compilers attempt to build at the same
time. From one data-point so far this may fix the problem although the
plugins job runs quite close to timeout.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-18-alex.bennee@linaro.org>
While it shouldn't cause problems we will never get useful information
from cris as it has yet to be converted to the common translator loop.
It also causes the Travis CI to fail for weird reasons which I have so
far been unable to replicate on a normal Xenial system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-17-alex.bennee@linaro.org>
This was a crutch when we introduced it - however it does have the
disadvantage of causing tests to timeout with large amounts of logs.
Lets drop it and see if the stability has improved since.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-16-alex.bennee@linaro.org>
At least for check-tcg we can split the build phase from the test
phase and do the former in parallel. While we are at it drop the V=1
for the check-tcg part as it just generates a lot more noise in the
logs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-15-alex.bennee@linaro.org>
Otherwise we end up failing to build our tests on CI which may have
older compilers that the user expects. We can get rid of this once we
can fallback to multiarch containers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-14-alex.bennee@linaro.org>
We will need this for some tests later. The docker images already
support it by default.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200203090932.19147-13-alex.bennee@linaro.org>
The arm64 hardware was especially hit by only building on 3 of the 32
available cores. Introduce a JOBS environment variable which we use
for all parallel builds. We still run the main checks single threaded
though so to make it easier to spot hangs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-12-alex.bennee@linaro.org>
We shall be adding more common early setup in a future commit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-11-alex.bennee@linaro.org>
It looks like the xenial tooling doesn't like something in our setup.
We should probably be moving to bionic for everything soon
anyway (libssh aside).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-10-alex.bennee@linaro.org>
As we require Python3 since commit ddf9069963, we don't need to
explicit it with the --python=/usr/bin/python3 configure option.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200125184217.30034-1-f4bug@amsat.org>
Message-Id: <20200203090932.19147-8-alex.bennee@linaro.org>
The sphinx support is fairly new and we don't seem to have all the
bugs worked out for cross development environments right now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-6-alex.bennee@linaro.org>
The genisoimage program is required for tests/cdrom-test
tests, otherwise they are skipped. The current Travis
environments do not provide it by default, so let's
explicitly require the genisoimage package.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200110191254.11303-2-wainersm@redhat.com>
Message-Id: <20200203090932.19147-5-alex.bennee@linaro.org>
When we are copying we want to ensure we grab the first
resolution (the found in path section). However even that binary might
be a symlink so lets make sure we chase the symlinks to copy the right
binary to where it can be found.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200203090932.19147-3-alex.bennee@linaro.org>
This includes fixing up the dependencies (Which were already wrong for
one of the mips variants).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-2-alex.bennee@linaro.org>
* Some Kconfig updates
* Some trivial clean-ups here and there
-----BEGIN PGP SIGNATURE-----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=qs+X
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-02-04' into staging
* Current qtests queue
* Some Kconfig updates
* Some trivial clean-ups here and there
# gpg: Signature made Tue 04 Feb 2020 08:43:28 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-02-04:
configure: Fix typo of the have_afalg variable
hw/hppa/Kconfig: LASI chipset requires PARALLEL port
hw/input: Do not enable CONFIG_PCKBD by default
Makefile: Do not use wildcard hw/*/Kconfig as input for minikconf
hw/*/Makefile.objs: Move many .o files to common-objs
trivial: Remove xenfb_enabled from sysemu.h
include/sysemu/sysemu.h: Remove usused variable no_quit
gitlab-ci: Refresh the list of iotests
tests/qtest: update comments about bios-tables-test-allowed-diff.h
boot-order-test: fix memleaks in boot-order-test
tests/Makefile: Fix inclusion of the qos dependency files
docs/devel: Fix qtest paths and info about check-block in testing.rst
tests/vhost-user-bridge: Fix build
test-logging: Fix -Werror=maybe-uninitialized warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The variable is called 'have_afalg' and not 'hava_afalg'.
Fixes: f0d92b56d8 ('introduce some common functions for af_alg backend')
Message-Id: <20200203160046.23194-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The PARISC Lasi chipset emulation requires some of the common parallel
support and fails to build on a --without-default-devices:
LINK hppa-softmmu/qemu-system-hppa
/usr/bin/ld: hw/hppa/lasi.o: in function `lasi_init':
hw/hppa/lasi.c:324: undefined reference to `parallel_mm_init'
collect2: error: ld returned 1 exit status
make[1]: *** [Makefile:206: qemu-system-hppa] Error 1
Fixes: 376b851909
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200129192350.27143-1-philmd@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The i8042 PS/2 Controller should not be enabled by default. It has
to be selected by machines or chipsets (e.g. SuperIO chipsets).
Message-Id: <20200115113748.24757-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The hw/*/Kconfig files should be sourced from hw/Kconfig, so there
is no need to pass them along as input files to minikconfig. We should
use the hw/*/Kconfig wildcard only for build dependencies in the Makefile.
With this change, there are now no duplicate entries in the generated
*-softmmu/config-devices.mak.d files anymore, and there is finally a
chance to get rid of stale Kconfig files like hw/bt/Kconfig, too (once
they do not show up in the config-devices.mak.d files now anymore).
Message-Id: <20200203153905.20544-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Alberto Garcia