Some hosts are slow or overloaded so test execution takes a long time.
Test cases use timeouts to protect against an infinite loop stalling the
test forever (especially important in automated test setups).
Commit 6cd14054b6 ("libqos virtio:
Increase ISR timeout") increased the clock_step() value in an attempt to
lengthen the virtio interrupt wait timeout, but timeout failures are
still occuring on the Travis automated testing platform.
This is because clock_step() only affects the guest's virtual time.
Virtio requests can be bottlenecked on host disk I/O latency - which
cannot be improved by stepping the clock, so the fix was ineffective.
This patch changes the qvirtio_wait_queue_isr() and
qvirtio_wait_config_isr() timeout mechanism from loop iterations to
microseconds. This way the test case can specify an absolute 30 second
timeout. Number of loop iterations is not a reliable timeout mechanism
since the speed depends on many factors including host performance.
Tests should no longer timeout on overloaded Travis instances.
Cc: Marc Marí <marc.mari.barcelo@gmail.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio event_index feature lets the device driver tell the device
how many requests to process before raising the next interrupt.
virtio-blk-test.c tries to verify that the device does not raise an
interrupt unnecessarily.
Unfortunately the test has a race condition. It spins checking for an
interrupt up to 100 times and then assumes the request has finished. On
a slow host the I/O request could still be in flight and the test would
fail.
This patch waits for the request to complete, or until a 30-second
timeout is reached. If an interrupt is raised while waiting the test
fails since the device was not supposed to raise interrupts.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a test wherein we engage the PCI AHCI
device and ensure that the memory region for the
HBA functionality is now accessible.
Under Q35 environments, additional PCI configuration
is performed to ensure that the HBA functionality
will become usable.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1408643079-30675-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Increase the clock step to avoid Travis failure in some builds due to
overagressive timeout.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Message-id: 1410428416-5046-1-git-send-email-marc.mari.barcelo@gmail.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement a simple first-fit memory allocator that
attempts to keep track of leased blocks of memory
in order to be able to re-use blocks.
Additionally, allow the user to specify when
initializing the device that upon cleanup,
we would like to assert that there are no
blocks in use. This may be useful for identifying
problems in qtests that use more complicated
set-up and tear-down routines.
This functionality is used in my upcoming ahci-test v2
patch set, but I didn't see fit to enable it for any
existing tests, which will continue to operate the
same as they have prior.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Added avail_event and NO_NOTIFY check before notifying.
Added used_event setting.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Added MSI-X support for qtest PCI.
Added MSI-X support for virtio-pci.
Added MSI-X test case in virtio-blk-test.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add functions necessary for working with indirect descriptors.
Add test using new functions.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add status changing and feature negotiation.
Add basic virtqueue support for adding and sending virtqueue requests.
Add ISR checking.
[Squashed request endianness fix by Greg Kurz <gkurz@linux.vnet.ibm.com>
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add functions to read and write virtio header fields.
Add status bit setting in virtio-blk-device.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Virtio header has been changed to compile and work with a real device.
Functions bus_foreach and device_find have been implemented for PCI.
Virtio-blk test case now opens a fake device.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch allows qpci_iomap to return the size of the
BAR mapping that it created, to allow driver applications
(e.g, ahci-test) to make determinations about the suitability
or the mapping size, or in the specific case of AHCI, how
many ports are supported by the HBA.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow users the chance to clean up the QPCIBusPC structure
by adding a small cleanup routine. Helps clear up small
memory leaks during setup/teardown, to allow for cleaner
debug output messages.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix a small memory leak inside of libqos, in the pc_alloc_init routine.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The libqos implementation of io_read{b,w,l} and io_write{b,w,l} hooks
was relying on qtest_mem{read,write}() respectively. With d81d410 (usb:
improve ehci/uhci test) this resulted in assertion failures on ppc hosts:
ERROR:tests/usb-hcd-ehci-test.c:78:ehci_port_test: assertion failed: ((value & mask) == (expect & mask))
ERROR:tests/usb-hcd-ehci-test.c:128:pci_uhci_port_2: assertion failed: (pcibus != NULL)
ERROR:tests/usb-hcd-ehci-test.c:150:pci_ehci_port_2: assertion failed: (pcibus != NULL)
qtest_read{b,w,l,q}() and qtest_write{b,w,l,q}() had been introduced
as endian-safe replacement for qtest_mem{read,write}() in I2C in
872536b (qtest: Add MMIO support). Use them for PCI as well.
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Fixes: c4efe1c qtest: add libqos including PCI support
Fixes: d81d410 usb: improve ehci/uhci test
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add U suffix when doing "1 << 31" to avoid undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Provide a constructor that takes the base address in addition to the
PC-specific one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372254743-15808-12-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit c4efe1cada (qtest: add libqos
including PCI support) created a libqos/ subdirectory but left the
existing I2C libqos files libi2c*.[hc] in tests/. Clean this up.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367502986-15104-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The fw_cfg ABI is Little Endian, so byte-swap the generically read
byte array to host endianness.
This unbreaks the fw_cfg tests on ppc.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367167547-19931-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a very simple allocator for the PC platform. It should
be possible to add backends for other platforms.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-5-git-send-email-aliguori@us.ibm.com
fw_cfg is needed to get the top of memory which is necessary for
doing PCI allocation and allocating RAM for DMA.
Add a PC version of fw_cfg and enough abstraction to support other
platforms.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-4-git-send-email-aliguori@us.ibm.com
This includes basic PCI support for the PC platform. Enough
abstraction should be present to support non-PC platforms too.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-3-git-send-email-aliguori@us.ibm.com
Stefan Hajnoczi