Display a message during the test using g_test_message rather
than fprintf.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
When TIS request is done, set 'sts' data field across all localities.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Fix:
TEST linux-test on i386
.../tests/tcg/multiarch/linux-test.c:201: readdir
readdir() calls getdents64() to have the list of the entries in a
directory, and getdents64() can return 64bit d_off values (with ext4,
for instance) that will not fit in the 32bit d_off field of the
readdir() dirent structure.
To avoid that, use readdir64() to use a 64bit d_off field too.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We have reached the point where the MacOSX build was regularly timing
out. So as before I've reduced the target list to "major"
architectures to try and bring the build time down. I've added an
additional MacOSX build with the latest XCode with a minimal list of
"most likely" targets on MacOS.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Our current fence implementation ignores fences for the user-only
configurations. This is incorrect but unlikely to manifest: it requires
multi-threaded user-only code that takes advantage of the weakness in
the host's memory model and can be inlined by TCG.
This patch simply treats fences the same way for all our emulators.
I've given it to testing as I don't want to construct a test that would
actually trigger the failure.
Our fence implementation has an additional deficiency where we map all
RISC-V fences to full fences. Now that we have a formal memory model
for RISC-V we can start to take advantage of the strength bits on our
fence instructions. This requires a bit more though, so I'm going to
split it out because the implementation is still correct without taking
advantage of these weaker fences.
Thanks to Richard Henderson for pointing out both of the issues.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
sfence.vm has been replaced in priv v1.10 spec by sfence.vma.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Right now, errors during realize()/pre_plug/plug of the zPCI device
would result in QEMU crashing instead of failing nicely when creating
a zPCI device for a PCI device.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181113121710.18490-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* Remove no-longer-needed workaround for small SAU regions for v8M
* Remove antique TODO comment
* MAINTAINERS: Add an entry for the 'collie' machine
* hw/arm/sysbus-fdt: Only call match_fn callback if the type matches
* Fix infinite recursion in tlbi_aa64_vmalle1_write()
* ARM KVM: fix various bugs in handling of guest debugging
* Correctly implement handling of HCR_EL2.{VI, VF}
* Hyp mode R14 is shared with User and System
* Give Cortex-A15 and -A7 the EL2 feature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wGuK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20181113' into staging
target/arm queue:
* Remove no-longer-needed workaround for small SAU regions for v8M
* Remove antique TODO comment
* MAINTAINERS: Add an entry for the 'collie' machine
* hw/arm/sysbus-fdt: Only call match_fn callback if the type matches
* Fix infinite recursion in tlbi_aa64_vmalle1_write()
* ARM KVM: fix various bugs in handling of guest debugging
* Correctly implement handling of HCR_EL2.{VI, VF}
* Hyp mode R14 is shared with User and System
* Give Cortex-A15 and -A7 the EL2 feature
# gpg: Signature made Tue 13 Nov 2018 10:51:53 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20181113:
target/arm/cpu: Give Cortex-A15 and -A7 the EL2 feature
target/arm: Hyp mode R14 is shared with User and System
target/arm: Correctly implement handling of HCR_EL2.{VI, VF}
target/arm: Track the state of our irq lines from the GIC explicitly
Revert "target/arm: Implement HCR.VI and VF"
arm: fix aa64_generate_debug_exceptions to work with EL2
arm: use symbolic MDCR_TDE in arm_debug_target_el
tests/guest-debug: fix scoping of failcount
target/arm64: kvm debug set target_el when passing exception to guest
target/arm64: hold BQL when calling do_interrupt()
target/arm64: properly handle DBGVR RESS bits
target/arm: Fix typo in tlbi_aa64_vmalle1_write
hw/arm/sysbus-fdt: Only call match_fn callback if the type matches
MAINTAINERS: Add an entry for the 'collie' machine
target/arm: Remove antique TODO comment
target/arm: Remove workaround for small SAU regions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cortex-A15 and Cortex-A7 both have EL2; now we've implemented
it properly we can enable the feature bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181109173553.22341-3-peter.maydell@linaro.org
Hyp mode is an exception to the general rule that each AArch32
mode has its own r13, r14 and SPSR -- it has a banked r13 and
SPSR but shares its r14 with User and System mode. We were
incorrectly implementing it as banked, which meant that on
entry to Hyp mode r14 was 0 rather than the USR/SYS r14.
We provide a new function r14_bank_number() which is like
the existing bank_number() but provides the index into
env->banked_r14[]; bank_number() provides the index to use
for env->banked_r13[] and env->banked_cpsr[].
All the points in the code that were using bank_number()
to index into env->banked_r14[] are updated for consintency:
* switch_mode() -- this is the only place where we fix
an actual bug
* aarch64_sync_32_to_64() and aarch64_sync_64_to_32():
no behavioural change as we already special-cased Hyp R14
* kvm32.c: no behavioural change since the guest can't ever
be in Hyp mode, but conceptually the right thing to do
* msr_banked()/mrs_banked(): we can never get to the case
that accesses banked_r14[] with tgtmode == ARM_CPU_MODE_HYP,
so no behavioural change
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181109173553.22341-2-peter.maydell@linaro.org
In commit 8a0fc3a29f we tried to implement HCR_EL2.{VI,VF},
but we got it wrong and had to revert it.
In that commit we implemented them as simply tracking whether there
is a pending virtual IRQ or virtual FIQ. This is not correct -- these
bits cause a software-generated VIRQ/VFIQ, which is distinct from
whether there is a hardware-generated VIRQ/VFIQ caused by the
external interrupt controller. So we need to track separately
the HCR_EL2 bit state and the external virq/vfiq line state, and
OR the two together to get the actual pending VIRQ/VFIQ state.
Fixes: 8a0fc3a29f
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20181109134731.11605-4-peter.maydell@linaro.org
Currently we track the state of the four irq lines from the GIC
only via the cs->interrupt_request or KVM irq state. That means
that we assume that an interrupt is asserted if and only if the
external line is set. This assumption is incorrect for VIRQ
and VFIQ, because the HCR_EL2.{VI,VF} bits allow assertion
of VIRQ and VFIQ separately from the state of the external line.
To handle this, start tracking the state of the external lines
explicitly in a CPU state struct field, as is common practice
for devices.
The complicated part of this is dealing with inbound migration
from an older QEMU which didn't have this state. We assume in
that case that the older QEMU did not implement the HCR_EL2.{VI,VF}
bits as generating interrupts, and so the line state matches
the current state in cs->interrupt_request. (This is not quite
true between commit 8a0fc3a29f and its revert, but
that commit is broken and never made it into any released QEMU
version.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181109134731.11605-3-peter.maydell@linaro.org
This reverts commit 8a0fc3a29f.
The implementation of HCR.VI and VF in that commit is not
correct -- they do not track the overall "is there a pending
VIRQ or VFIQ" status, but whether there is a pending interrupt
due to "this mechanism", ie the hypervisor having set the VI/VF
bits. The overall pending state for VIRQ and VFIQ is effectively
the logical OR of the inbound lines from the GIC with the
VI and VF bits. Commit 8a0fc3a29f would result in pending
VIRQ/VFIQ possibly being lost when the hypervisor wrote to HCR.
As a preliminary to implementing the HCR.VI/VF feature properly,
revert the broken one entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181109134731.11605-2-peter.maydell@linaro.org
The test was incomplete and incorrectly caused debug exceptions to be
generated when returning to EL2 after a failed attempt to single-step
an EL1 instruction. Fix this while cleaning up the function a little.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-8-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already have this symbol defined so lets use it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-7-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
You should declare you are using a global version of a variable before
you attempt to modify it in a function.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-5-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we are debugging the guest all exceptions come our way but might
be for the guest's own debug exceptions. We use the ->do_interrupt()
infrastructure to inject the exception into the guest. However, we are
missing a full setup of the exception structure, causing an assert
later down the line.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-4-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the assertion failure when running interrupts.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-3-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This only fails with some (broken) versions of gdb but we should
treat the top bits of DBGBVR as RESS. Properly sign extend QEMU's
reference copy of dbgbvr and also update the register descriptions in
the comment.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This would cause an infinite recursion or loop.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181110121711.15257-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit af7d64ede0 (hw/arm/sysbus-fdt: Allow device matching with DT
compatible value) introduced a match_fn callback which gets called
for each registered combo to check whether a sysbus device can be
dynamically instantiated. However the callback gets called even if
the device type does not match the binding combo typename field.
This causes an assert when passing "-device ramfb" to the qemu
command line as vfio_platform_match() gets called on a non
vfio-platform device.
To fix this regression, let's change the add_fdt_node() logic so
that we first check the type and if the match_fn callback is defined,
then we also call it.
Binding combos only requesting a type check do not define the
match_fn callback.
Fixes: af7d64ede0 (hw/arm/sysbus-fdt: Allow device matching with
DT compatible value)
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-id: 20181106184212.29377-1-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no active maintainer, but since Peter is picking up
patches via qemu-arm@nongnu.org, I think we could at least use
"Odd Fixes" as status here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 1541528230-31817-1-git-send-email-thuth@redhat.com
[PMM: Also add myself as an M: contact]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove a TODO comment about implementing the vectored interrupt
controller. We have had an implementation of that for a decade;
it's in hw/intc/pl190.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181106164118.16184-1-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Before we supported direct execution from MMIO regions, we
implemented workarounds in commit 7204243599
which let us avoid doing so, even if the SAU or MPU region
was less than page-sized.
Once we implemented execute-from-MMIO, we removed part
of those workarounds in commit d4b6275df320cee76; but
we forgot the one in get_phys_addr_pmsav8() which
suppressed use of small SAU regions in executable regions.
Remove that workaround now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181106163801.14474-1-peter.maydell@linaro.org
- file-posix: Don't waste a file descriptor for locking, don't lock the
same bit multiple times
- nvme: Fix double free and memory leak
- Misc error handling fixes
- Added NULL checks found by static analysis
- Allow more block drivers to not be included in the qemu build
-----BEGIN PGP SIGNATURE-----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=4Xo8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- file-posix: Don't waste a file descriptor for locking, don't lock the
same bit multiple times
- nvme: Fix double free and memory leak
- Misc error handling fixes
- Added NULL checks found by static analysis
- Allow more block drivers to not be included in the qemu build
# gpg: Signature made Mon 12 Nov 2018 17:05:00 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qcow2: Read outside array bounds in qcow2_pre_write_overlap_check()
block: Fix potential Null pointer dereferences in vvfat.c
qemu-img: assert block_job_get() does not return NULL in img_commit()
block: Null pointer dereference in blk_root_get_parent_desc()
job: Fix off-by-one assert checks for JobSTT and JobVerbTable
block: Make more block drivers compile-time configurable
tests: Add unit tests for image locking
file-posix: Drop s->lock_fd
file-posix: Skip effectiveless OFD lock operations
nvme: free cmbuf in nvme_exit
nvme: don't unref ctrl_mem when device unrealized
blockdev: Consistently use snapshot_node_name in external_snapshot_prepare()
blockdev: handle error on block latency histogram set error
file-posix: Use error API properly
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Added NULL checks found by static analysis
- Allow more block drivers to not be included in the qemu build
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJb6a+GAAoJEPQH2wBh1c9ATAEH/iIa6f5a2rvNfnzpMjFqbHhg
GMCLqVm10EkphyD3t/99MuyU1OFYkaObojV5wv085cOtyKLvZdVDtmlmKO2XAvdt
w209B+8wlWTGqG4+FObopmgrq5VBMgNNlZ3WqDxkGFKCBI9w7QSv7upTLqTg9P2O
/3dnhBDfFLgGZhlXhmtZaPhAW51j1B4mpeXKX1KXIDkMEYMoMA8MZoPx3v72gO2E
V51i/MMUJwNjynlNn/Dyf/9pjmyzZLliZmkTqKpa8DPBaGjQ4/Fe4aGxqXUgv0Uz
pXLAeL0tYZaLxHrguJltrovavJx13OjYm9Vq5W5Zq1PmhLTA+uBXJmHMzUxBHYg=
=N/Mn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-2018-11-12' into queue-block
Block patches:
- Added NULL checks found by static analysis
- Allow more block drivers to not be included in the qemu build
# gpg: Signature made Mon Nov 12 17:51:18 2018 CET
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* mreitz/tags/pull-block-2018-11-12:
qcow2: Read outside array bounds in qcow2_pre_write_overlap_check()
block: Fix potential Null pointer dereferences in vvfat.c
qemu-img: assert block_job_get() does not return NULL in img_commit()
block: Null pointer dereference in blk_root_get_parent_desc()
job: Fix off-by-one assert checks for JobSTT and JobVerbTable
block: Make more block drivers compile-time configurable
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The commit for 0e4e4318ea increments QCOW2_OL_MAX_BITNR but does not
add an array entry for QCOW2_OL_BITMAP_DIRECTORY_BITNR to metadata_ol_names[].
As a result, an array dereference of metadata_ol_names[8] in
qcow2_pre_write_overlap_check() could result in a read outside of the array bounds.
Fixes: 0e4e4318ea ('qcow2: add overlap check for bitmap directory')
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1541453919-25973-6-git-send-email-Liam.Merwick@oracle.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The calls to find_mapping_for_cluster() may return NULL but it
isn't always checked for before dereferencing the value returned.
Additionally, add some asserts to cover cases where NULL can't
be returned but which might not be obvious at first glance.
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Message-id: 1541453919-25973-5-git-send-email-Liam.Merwick@oracle.com
[mreitz: Dropped superfluous check of "mapping" following an assertion
that it is not NULL, and fixed some indentation]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Although the function block_job_get() can return NULL, it would be a
serious bug if it did so (because the job yields before executing anything
(if it started successfully); but otherwise, commit_active_start() would
have returned an error). However, as a precaution, before dereferencing
the 'job' pointer in img_commit() assert it is not NULL.
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1541453919-25973-4-git-send-email-Liam.Merwick@oracle.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The dev_id returned by the call to blk_get_attached_dev_id() in
blk_root_get_parent_desc() can be NULL (an internal call to
object_get_canonical_path may have returned NULL).
Instead of just checking this case before before dereferencing,
adjust blk_get_attached_dev_id() to return the empty string if no
object path can be found (similar to the case when blk->dev is NULL
and an empty string is returned).
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Message-id: 1541453919-25973-3-git-send-email-Liam.Merwick@oracle.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In the assert checking the array dereference of JobVerbTable[verb]
in job_apply_verb() the check of the index, verb, allows an overrun
because an index equal to the array size is permitted.
Similarly, in the assert check of JobSTT[s0][s1] with index s1
in job_state_transition(), an off-by-one overrun is not flagged
either.
This is not a run-time issue as there are no callers actually
passing in the max value.
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Reviewed-by: Darren Kenny <Darren.Kenny@oracle.com>
Reviewed-by: Mark Kanda <Mark.Kanda@oracle.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1541453919-25973-2-git-send-email-Liam.Merwick@oracle.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds configure options to control the following block drivers:
* Bochs
* Cloop
* Dmg
* Qcow (V1)
* Vdi
* Vvfat
* qed
* parallels
* sheepdog
Each of these defaults to being enabled.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20181107063644.2254-1-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The lock_fd field is not strictly necessary because transferring locked
bytes from old fd to the new one shouldn't fail anyway. This spares the
user one fd per image.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we know we've already locked the bytes, don't do it again; similarly
don't unlock a byte if we haven't locked it. This doesn't change the
behavior, but fixes a corner case explained below.
Libvirt had an error handling bug that an image can get its (ownership,
file mode, SELinux) permissions changed (RHBZ 1584982) by mistake behind
QEMU. Specifically, an image in use by Libvirt VM has:
$ ls -lhZ b.img
-rw-r--r--. qemu qemu system_u:object_r:svirt_image_t:s0:c600,c690 b.img
Trying to attach it a second time won't work because of image locking.
And after the error, it becomes:
$ ls -lhZ b.img
-rw-r--r--. root root system_u:object_r:virt_image_t:s0 b.img
Then, we won't be able to do OFD lock operations with the existing fd.
In other words, the code such as in blk_detach_dev:
blk_set_perm(blk, 0, BLK_PERM_ALL, &error_abort);
can abort() QEMU, out of environmental changes.
This patch is an easy fix to this and the change is regardlessly
reasonable, so do it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This avoid a memory leak in unhotplug nvme device.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, when hotplug/unhotplug nvme device, it will cause an
assert in object.c. Following is the backtrack:
ERROR:qom/object.c:981:object_unref: assertion failed: (obj->ref > 0)
Thread 2 "qemu-system-x86" received signal SIGABRT, Aborted.
[Switching to Thread 0x7fffcbd32700 (LWP 18844)]
0x00007fffdb9e4fff in raise () from /lib/x86_64-linux-gnu/libc.so.6
(gdb) bt
/lib/x86_64-linux-gnu/libglib-2.0.so.0
/lib/x86_64-linux-gnu/libglib-2.0.so.0
qom/object.c:981
/home/liqiang02/qemu-upstream/qemu/memory.c:1732
/home/liqiang02/qemu-upstream/qemu/memory.c:285
util/qemu-thread-posix.c:504
/lib/x86_64-linux-gnu/libpthread.so.0
This is caused by memory_region_unref in nvme_exit.
Remove it to make the PCIdevice refcount correct.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the function external_snapshot_prepare() we have a
BlockdevSnapshotSync struct, which has the usual combination
of has_snapshot_node_name and snapshot_node_name fields for an
optional field. We set up a local variable
const char *snapshot_node_name =
s->has_snapshot_node_name ? s->snapshot_node_name : NULL;
and then mostly use "if (!snapshot_node_name)" for checking
whether we have a snapshot node name. The exception is that in
one place we check s->has_snapshot_node_name instead. This
confuses Coverity (CID 1396473), which thinks it might be
possible to get here with s->has_snapshot_node_name true but
snapshot_node_name NULL, and warns that the call to
qdict_put_str() will segfault in that case.
Make the code consistent and unconfuse Coverity by using
the same check for this conditional that we do in the rest
of the surrounding code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Function block_latency_histogram_set may return error, but qapi ignore this.
This can be reproduced easily by qmp command:
virsh qemu-monitor-command INSTANCE '{"execute":"x-block-latency-histogram-set",
"arguments":{"device":"drive-virtio-disk1","boundaries":[10,200,40]}}'
In fact this command does not work, but we still get success result.
qmp_x_block_latency_histogram_set is a batch setting API, report error ASAP.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use error_report for situations that affect user operation (i.e. we're
actually returning error), and warn_report/warn_report_err when some
less critical error happened but the user operation can still carry on.
For raw_normalize_devicepath, add Error parameter to propagate to
its callers.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add support for SO_REUSEPORT, including strace support. SO_REUSEPORT
was introduced relatively recently, since Linux 3.9, so use
'#if defined SO_REUSEPORT'.
Signed-off-by: Yunqiang Su <ysu@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1540904108-30873-4-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this. Avoid the bug by not using the
"modify in place" byte swapping functions.
Patch produced with scripts/coccinelle/inplace-byteswaps.cocci.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20181016175236.5840-1-peter.maydell@linaro.org
The nios2 main loop code's code does some odd
things with gdb_handlesig() that no other target
CPU does: it has some signals that are delivered
to gdb and only to gdb. Stop doing this, and instead
behave like all the other targets:
* a trap instruction becomes a SIGTRAP
* an unhandled exception type returned from cpu_exec()
causes us to abort(), not to try to hand gdb a SIGILL
This fixes in passing Coverity issue CID 1390853,
which was a complaint that the old code failed to
check the return value from gdb_handlesig().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181019174958.26616-3-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[lv: removed gdbsig unused variable]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The CPU main-loop routines for linux-user generally
call gdb_handlesig() when they're about to queue a
SIGTRAP signal. This is wrong, because queue_signal()
will cause us to pend a signal, and process_pending_signals()
will then call gdb_handlesig() itself. So the effect is that
we notify gdb of the SIGTRAP, and then if gdb says "OK,
continue with signal X" we will incorrectly notify
gdb of the signal X as well. We don't do this double-notify
for anything else, only SIGTRAP.
Remove this unnecessary and incorrect code from all
the targets except for nios2 (whose main loop is
doing something different and broken, and will be handled
in a separate patch).
This bug only manifests if the user responds to the reported
SIGTRAP using "signal SIGFOO" rather than "continue"; since
the latter is the overwhelmingly common thing to do after a
breakpoint most people won't have hit this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>