Move this function to common code. It has no arch specific
dependencies. Prepares support for multi-arch where the translate-all
interface needs to be virtualised. One less thing to virtualise.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <44a7c73604ed2552af47ed02b047b6a772b683e0.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The goal is to split the functions such that cpu-exec is CPU specific
content, while cpus-exec-common.c is generic code only. The function
interface to cpu-exec needs to be virtualised to prepare support for
multi-arch and moving these definitions out saves bloating the QOM
interface. So move these definitions out of cpu-exec to a new module,
cpu-exec-common.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <3cefeb3fbbb33031670951a0e74de2778529da3f.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For moving target- and device-specific code from monitor.c,
to beginning we move info_cmds content to hmp-commands-info.hx
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-2-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using ccache with CCACHE_BASEDIR set to $(SRC_PATH) or a parent will
rewrite all absolute paths to relative paths. This interacts poorly with
QEMU's two-level build directory scheme. For example, lets say
BUILD_DIR=$(SRC_PATH)/build so build/blockdev.d will contain:
blockdev.o: ../blockdev.c ../include/sysemu/block-backend.h \
Now the target build under build/x86_64-softmmu or similar will depend
on ../blockdev.o which in turn will get make to source ../blockdev.d to
check its dependencies. Since make always considers paths relative to
the current working directory rather than the makefile the path appeared
in the relative path to ../blockdev.c is useless.
This change simply adds the top level build directory to vpath so paths
relative to the source directory, top build directory, and target build
directory all work just fine.
Signed-off-by: Michael Marineau <michael.marineau@coreos.com>
Message-Id: <1439103775-11836-1-git-send-email-michael.marineau@coreos.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For historic reasons, ram migration have been on arch_init.c. Just
split it into migration/ram.c, the same that happened with block.c.
There is only code movement, no changes altogether.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
make can be invoked in the individual build dirs to build an individual
target or just a single file of a target. e.g.
touch translate-all.c
make -C microblazeel-softmmu translate-all.o
There is however a small bug when using the pixman submodule.
config-host.mak will ref BUILD_DIR for the pixman -I CFLAGS:
grep BUILD_DIR config-host.mak
QEMU_CFLAGS=-I$(SRC_PATH)/pixman/pixman -I$(BUILD_DIR)/pixman/pixman ...
This causes a build failure as -I/pixman/pixman (BUILD_DIR=="") will
not be found.
BUILD_DIR is usually set by the top level Makefile. Just lazy-set it in
Makefile.target to the parent directory.
Granted, this will not work if the pixman submodule is not prebuilt,
but it at least means you can do incremental partial builds once you
have done your initial full build (or attempt) from the top level.
The next step would be refactor make infrastructure to rebuild pixman
on a submake like the one above.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <1432618686-16077-1-git-send-email-crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason for device tree API to be built per-target.
common-obj it. There is an extraneous inclusion of config.h that
needs to be removed.
Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Implements setting the icon for the binary file in Mac OS X.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
[PMM: tweaked makefile to use $@ and quiet-command]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I discovered a problem when trying to build QEMU statically with gcc.
libm is an element of LIBS while libpixman-1 is an element in
libs_softmmu. Libpixman references functions in libm, so the original
ordering makes linking fail.
This fix is to reorder $libs_softmmu and $LIBS to make -lm appear after
-lpixman-1. However I'm not quite sure if this is the right fix, hence
the RFC tag.
Normally QEMU is built with c++ compiler which happens to link in libm
(at least this is the case with g++), so building QEMU statically
normally just works and nobody notices this issue.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Message-Id: <1425912873-21215-1-git-send-email-wei.liu2@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
relink binary whenever config-devices.mak changes:
this makes sense as we are adding/removing devices,
so binary has to be relinked to be up to date.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1424332114-13440-2-git-send-email-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some of these functions are really quite large. We have a number of
things that ought to be circularly dependent, but we duplicated code
to break that chain for the inlines.
This saved 25% of the code size of one of the translators I examined.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Generates file "trace/generated-helpers.c" with TCG helper definitions to trace
events in guest code at execution time.
The helpers ('helper_trace_${event}_exec_proxy') cast the TCG-compatible native
argument types to their original types (as defined in "trace-events") and call
the tracing routine ('trace_${event}_exec').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The simpletrace SystemTap tapset outputs simpletrace binary traces for
SystemTap probes. This is useful because SystemTap has no default way
to format or store traces. The simpletrace SystemTap tapset provides an
easy way to store traces.
The simpletrace.py tool or custom Python scripts using the
simpletrace.py API can analyze SystemTap these traces:
$ ./configure --enable-trace-backends=dtrace ...
$ make && make install
$ stap -e 'probe qemu.system.x86_64.simpletrace.* {}' \
-c qemu-system-x86_64 >/tmp/trace.out
$ scripts/simpletrace.py --no-header trace-events /tmp/trace.out
g_malloc 4.531 pid=15519 size=0xb ptr=0x7f8639c10470
g_malloc 3.264 pid=15519 size=0x300 ptr=0x7f8639c10490
g_free 5.155 pid=15519 ptr=0x7f8639c0f7b0
Note that, unlike qemu-system-x86_64.stp and
qemu-system-x86_64.stp-installed, only one file is needed since the
simpletrace SystemTap tapset does not reference the QEMU binary by path.
Therefore it doesn't matter whether the QEMU binary is installed or not.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The existing test whether "-lm" needs to be included or not is
insufficient as it reports false negative on Fedora20/ppc64.
This happens because sin(0.0) is a constant value which compiler
can safely throw away and therefore there is no need to add "-lm".
As the result, qemu-nbd/qemu-io/qemu-img tools cannot compile.
This adds a global variable and uses it in the test to prevent
from optimization.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[Use Peter's improvement on the test to fool LTO, and remove the
now useless -lm addition in Makefile.target. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use common rule (macro) to install and strip binaries, and use
it in all places where we install binaries, instead of fixing
bugs like 1319493 in every place.
(This fixes https://bugs.launchpad.net/bugs/1319493)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
MST: comment tweaks
Enable compilation of the newly added libdecnumber library code.
Object file targets are added to Makefile.target using a newly
introduced flag CONFIG_LIBDECNUMBER. The flag is added
to the PowerPC targets (ppc[64]-linux-user, ppc[64]-softmmu).
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: add ppcemb and ppc64abi32 config]
Signed-off-by: Alexander Graf <agraf@suse.de>
This change adds HOST_VARIANT_DIR so the various BSD OS dependent
code can be separated into its own directories rather than
using #ifdef's.
This may also allow an BSD variant OS to host another BSD variant's
executable as a target.
Signed-off-by: Sean Bruno <sbruno@freebsd.org>
Message-id: 1402246651-71099-2-git-send-email-sbruno@freebsd.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds support to compile QEMU with multiple tracing backends at the same time.
For example, you can compile QEMU with:
$ ./configure --enable-trace-backends=ftrace,dtrace
Where 'ftrace' can be handy for having an in-flight record of events, and 'dtrace' can be later used to extract more information from the system.
This patch allows having both available without recompiling QEMU.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
$(INSTALL_PROG) is evaluated to libtool if using libtool, while
$(INSTALL) is not. Use $(INSTALL_PROG) so that libtool is used
with target too when necessary. This allows, for example, to
link qemu with shared libcacard.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Fam Zheng <famz@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alon Levy <alevy@redhat.com>
Cc: qemu-trivial@nongnu.org
--
This is done on top of previous patch (using $(STRIP)), but it can
be used by its own.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 52ba784d3 replaced $(STRIP_OPT) with $(STRIP) in some
places (for example, Makefile.target), but not all of them.
There are a few places remain in main Makefile which still
uses $(STRIP_OPT). Replace these places with $(STRIP) too.
While at it, simplify variable pattern substitution of the
surrounding places, change $(patsubst pat,rep,$(var)) into
$(var:pat=rep) which is much easier to read (this is probably
a good idea to do everywhere).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Fam Zheng <famz@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to save/restore obj-y, we can just build all-obj-y incrementally.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On win*, we build QEMU_PROGW (GUI) and create a console app QEMU_PROG
from it, while on non-win*, we make only QEMU_PROG using the same
rules as used for QEMU_PROGW on win*. Make just one rule for building
main executable, and an additional rule for win* to make console app
from it. Also consolidate tests for $(QEMU_PROGW).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
[Fix user-mode compilation. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So common functions used by both HVM and PV are factored out from
xen-all.c to xen-common.c.
Finally rename xen-all.c to xen-hvm.c, as those functions are only
useful to HVM guest.
Create *-stub files and modify Makefile.target to reflect the changes.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
$(common-obj-m) will include $(block-obj-m), like $(common-obj-y) does
for $(block-obj-y).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Makefile.target includes rule.mak and unnested common-obj-y, then prefix
them with '../', this will ignore object specific QEMU_CFLAGS in subdir
Makefile.objs:
$(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS)
Because $(obj) here is './block', instead of '../block'. This doesn't
hurt compiling because we basically build all .o from top Makefile,
before entering Makefile.target, but it will affact arriving per-object
libs support.
The starting point of $(obj) is passed in as argument of unnest-vars, as
well as nested variables, so that different Makefiles can pass in a
right value.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Makefile.target: Build gdbstub-xml.o only when
TARGET_XML_FILES is not empty.
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_NO_* variables replaced with the lnot logical function
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
[PMM: fixed a few CONFIG_NO_* uses that were missed]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TARGET_ARCH is generally wrong to use, there are better variables
provided in config-target.mak. The right one is usually TARGET_NAME
(previously TARGET_ARCH2), but for bsd-user we can also use TARGET_ABI_DIR
for consistency with linux-user.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1370349928-20419-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For systemtap the location of the process being tapped is crucial, as a
result the existing stp file requires installation for use.
There are now two files:
$(TARGET_DIR)/$(QEMU_PROG).stp-installed: copied to $(tapdir)/$(QEMU_PROG).stp
$(TARGET_DIR)/$(QEMU_PROG).stp: pointing to the built binary, usable
without installation
To use:
stap -I $(TARGET_DIR) ...
Signed-off-by: Alon Levy <alevy@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1370349928-20419-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qmp_dump_guest_memory() calls dump_init() and returns an Error when
cpu_get_dump_info() returns an error, as done by the stub.
So there is no need to have a stub for qmp_dump_guest_memory().
Enable the documentation of the always-present dump-guest-memory command.
That way we can drop CONFIG_HAVE_CORE_DUMP and leave configure
completely out of the picture for target CPU features.
Signed-off-by: Andreas Färber <afaerber@suse.de>
dump.c:dump_init() never checked for the return code anyway.
If paging is not enabled, it will fall back to an identity map.
If paging is enabled and getting memory mapping list is not
implemented, qemu_get_guest_memory_mapping() will return an error.
Since the targets not implementing memory mapping also don't implement
dump support, we will not reach this code today and can worry about
changing cpu_paging_enabled() default when the need arises.
This allows us to drop CONFIG_HAVE_GET_MEMORY_SUPPORT.
Signed-off-by: Andreas Färber <afaerber@suse.de>
This allows us to drop CONFIG_NO_CORE_DUMP with its indirect dependency
on CONFIG_HAVE_CORE_DUMP.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It will provide stubs for *-user targets once softmmu-specific calls
are attempted from common CPU code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The -mwindows option is not anymore in LIBS at this point of the Makefile,
it is only in libs_softmmu. Check the right variable.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Moving the inclusions closer to Makefile, and before rules.mak, makes
Makefile and Makefile.target more consistent with each other.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1366102238-12374-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move -lm to the end of the line, so that it can be picked up as a
dependency by pixman in the static build case.
Reviewed-by: Peter Maydell <peter.maydell@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Introduce [qtest_]{read,write}[bwlq]() libqtest functions and
corresponding QTest protocol commands to replace local versions in
libi2c-omap.c.
Also convert m48t59-test's cmos_{read,write}_mmio() to {read,write}b().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1361051043-27944-4-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can
be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU
and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how
we define symbols for hardware components.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The directory descent mechanism, and a less-flat tree both helped
in making some *-obj-y definitions very short. Many of these
often end up in universal-obj-y, and used to be separate only
because of libuser (which is now part of history...).
Consolidate these variables in a single one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCI no longer compiled after commit 76cad71136.
The TCI disassembler depends on data structures which are different for
each QEMU target, so it cannot be compiled as a universal-obj today.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vnc-tls.h is included by vnc.h, and it includes gnutls/gnutls.h.
Hence, GnuTLS header files are needed by all files that include
vnc.h, most notably qmp.c. Move these flags to QEMU_CFLAGS for
simplicity.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Crosthwaite