Similarly to accel properties, move compat properties out of globals
registration, and apply the machine compat properties during
device_post_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Starting from QEMU 4.0, let's specify "split" as the default value for
kernel-irqchip.
So for QEMU>=4.0 we'll have: allowed=Y,required=N,split=Y
for QEMU<=3.1 we'll have: allowed=Y,required=N,split=N
(omitting all the "kernel_irqchip_" prefix)
Note that this will let the default q35 machine type to depend on
Linux version 4.4 or newer because that's where split irqchip is
introduced in kernel. But it's fine since we're boosting supported
Linux version for QEMU 4.0 to around Linux 4.5. For more information
please refer to the discussion on AMD's RDTSCP:
https://lore.kernel.org/lkml/20181210181328.GA762@zn.tnic/
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For the older machines (such as Mac and SPARC) the DT nodes representing
bootdevices for disk nodes are irregular for mainly historical reasons.
Since the majority of bootdevice nodes for these machines either do not have a
separate disk node or require different (custom) names then it is much easier
for processing to just disable all suffixes for a particular machine.
Introduce a new ignore_boot_device_suffixes MachineClass property to control
bootdevice suffix generation, defaulting to false in order to preserve
compatibility.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20180810124027.10698-1-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
commit b08199c6fb accidentally added a reference to a doc
comment to a nonexistent memory_region_allocate_aux_memory().
This was a leftover from a previous version of the patchset
which defined memory_region_allocate_aux_memory() for
"allocate RAM MemoryRegion and register it for migration"
and left "memory_region_init_ram()" with its original semantics
of "allocate RAM MR but do not register for migration". In
the end we decided on the approach of "memory_region_init_ram()
registers the MR for migration, and memory_region_init_ram_nomigrate()
is a new function which does not", but this comment change
got left in by mistake. Revert that part of the commit.
Reported-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180702130605.13611-1-peter.maydell@linaro.org
The oldest machine type which is still used in a still maintained distro
is a pc-0.12 based machine type in RHEL6, so everything that is older
than pc-0.12 should not be used anymore. Thus let's deprecate pc-0.10
and pc-0.11 so that we can finally remove them in a future release.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1529917512-10528-1-git-send-email-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Rename it to better match the new terminology.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-9-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's allow to query the MemoryHotplugState directly from the machine.
If the pointer is NULL, the machine does not support memory devices. If
the pointer is !NULL, the machine supports memory devices and the
data structure contains information about the applicable physical
guest address space region.
This allows us to generically detect if a certain machine has support
for memory devices, and to generically manage it (find free address
range, plug/unplug a memory region).
We will rename "MemoryHotplugState" to something more meaningful
("DeviceMemory") after we completed factoring out the pc-dimm code into
MemoryDevice code.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
[ehabkost: rebased series, solved conflicts at spapr.c]
[ehabkost: squashed fix to use g_malloc0()]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The consoles ("sclpconsole" and "sclplmconsole") can only be configured
with "-device" and "-chardev" so far. Other machines use the convenience
option "-serial" to configure the default consoles, even for virtual
consoles like spapr-vty on the pseries machine. So let's support this
option on s390x, too. This way we can easily enable the serial console
here again with "-nodefaults", for example:
qemu-system-s390x -no-shutdown -nographic -nodefaults -serial mon:stdio
... which is way shorter than typing:
qemu-system-s390x -no-shutdown -nographic -nodefaults \
-chardev stdio,id=c1,mux=on -device sclpconsole,chardev=c1 \
-mon chardev=c1
The -serial parameter can also be used if you only want to see the QEMU
monitor on stdio without using -nodefaults, but not the console output.
That's something that is pretty impossible with the current code today:
qemu-system-s390x -no-shutdown -nographic -serial none
While we're at it, this patch also maps the second -serial option to the
"sclplmconsole", so that there is now an easy way to configure this second
console on s390x, too, for example:
qemu-system-s390x -no-shutdown -nographic -serial null -serial mon:stdio
Additionally, the new code is also smaller than the old one and we have
less s390x-specific code in vl.c :-)
I've also checked that migration still works as expected by migrating
a guest with console output back and forth between a qemu-system-s390x
that has this patch and an instance without this patch.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1524754794-28005-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With all targets defining CPU_RESOLVING_TYPE, refactor
cpu_parse_cpu_model(type, cpu_model) to parse_cpu_model(cpu_model)
so that callers won't have to know internal resolving cpu
type. Place it in exec.c so it could be called from both
target independed vl.c and *-user/main.c.
That allows us to stop abusing cpu type from
MachineClass::default_cpu_type
as resolver class in vl.c which were confusing part of
cpu_parse_cpu_model().
Also with new parse_cpu_model(), the last users of cpu_init()
in null-machine.c and bsd/linux-user targets could be switched
to cpu_create() API and cpu_init() API will be removed by
follow up patch.
With no longer users left remove MachineState::cpu_model field,
new code should use MachineState::cpu_type instead and
leave cpu_model parsing to generic code in vl.c.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-5-git-send-email-imammedo@redhat.com>
[ehabkost: Fix bsd-user build error]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When CPU supports memory encryption feature, the property can be used to
specify the encryption object to use when launching an encrypted guest.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove dependency of possible_cpus on 1st CPU instance,
which decouples configuration data from CPU instances that
are created using that data.
Also later it would be used for enabling early cpu to numa node
configuration at runtime qmp_query_hotpluggable_cpus() should
provide a list of available cpu slots at early stage,
before machine_init() is called and the 1st cpu is created,
so that mgmt might be able to call it and use output to set
numa mapping.
Use MachineClass::possible_cpu_arch_ids() callback to set
cpu type info, along with the rest of possible cpu properties,
to let machine define which cpu type* will be used.
* for SPAPR it will be a spapr core type and for ARM/s390x/x86
a respective descendant of CPUClass.
Move parse_numa_opts() in vl.c after cpu_model is parsed into
cpu_type so that possible_cpu_arch_ids() would know which
cpu_type to use during layout initialization.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1515597770-268979-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The existing has_dynamic_sysbus flag makes the machine accept
every user-creatable sysbus device type on the command-line.
Replace it with a list of allowed device types, so machines can
easily accept some sysbus devices while rejecting others.
To keep exactly the same behavior as before, the existing
has_dynamic_sysbus=true assignments are replaced with a
TYPE_SYS_BUS_DEVICE entry on the allowed list. Other patches
will replace the TYPE_SYS_BUS_DEVICE entries with more specific
lists of devices.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-2-ehabkost@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Linux and Windows need ACPI SRAT table to make memory hotplug work properly,
however currently QEMU doesn't create SRAT table if numa options aren't present
on CLI.
Which breaks both linux and windows guests in certain conditions:
* Windows: won't enable memory hotplug without SRAT table at all
* Linux: if QEMU is started with initial memory all below 4Gb and no SRAT table
present, guest kernel will use nommu DMA ops, which breaks 32bit hw drivers
when memory is hotplugged and guest tries to use it with that drivers.
Fix above issues by automatically creating a numa node when QEMU is started with
memory hotplug enabled but without '-numa' options on CLI.
(PS: auto-create numa node only for new machine types so not to break migration).
Which would provide SRAT table to guests without explicit -numa options on CLI
and would allow:
* Windows: to enable memory hotplug
* Linux: switch to SWIOTLB DMA ops, to bounce DMA transfers to 32bit allocated
buffers that legacy drivers/hw can handle.
[Rewritten by Igor]
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alistair Francis <alistair23@gmail.com>
Cc: Takao Indoh <indou.takao@jp.fujitsu.com>
Cc: Izumi Taku <izumi.taku@jp.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
max_cpus needs to be an upper bound on the number of vCPUs
initialized; otherwise TCG region initialization breaks.
Some boards initialize a hard-coded number of vCPUs, which is not
captured by the global max_cpus and therefore breaks TCG initialization.
Fix it by adding the .min_cpus field to machine_class.
This commit also changes some user-facing behaviour: we now die if
-smp is below this hard-coded vCPU minimum instead of silently
ignoring the passed -smp value (sometimes announcing this by printing
a warning). However, the introduction of .default_cpus lessens the
likelihood that users will notice this: if -smp isn't set, we now
assign the value in .default_cpus to both smp_cpus and max_cpus. IOW,
if a user does not set -smp, they always get a correct number of vCPUs.
This change fixes 3468b59 ("tcg: enable multiple TCG contexts in
softmmu", 2017-10-24), which broke TCG initialization for some
ARM boards.
Fixes: 3468b59e18
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 1510343626-25861-6-git-send-email-cota@braap.org
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch add a MachineClass element that can be set in the machine C
code to specify a list of supported CPU types. If the supported CPU
types are specified the user enter CPU (by -cpu at runtime) is checked
against the supported types and QEMU exits if they aren't supported.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <b8474e9d2e0a219d9bac901342f983b13d009301.1507059418.git.alistair.francis@xilinx.com>
[ehabkost: removed assert(), rewrote comment]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Calculating default node-ids for CPUs in possible_cpu_arch_ids()
is rather fragile since defaults calculation uses nb_numa_nodes but
callback might be potentially called early before all -numa CLI
options are parsed, which would lead to cpus assigned only upto
nb_numa_nodes at the time possible_cpu_arch_ids() is called.
Issue was introduced by
(7c88e65 numa: mirror cpu to node mapping in MachineState::possible_cpus)
and for example CLI:
-smp 4 -numa node,cpus=0 -numa node
would set props.node-id in possible_cpus array for every non
explicitly mapped CPU to the first node.
Issue is not visible to guest nor to mgmt interface due to
1) implictly mapped cpus are forced to the first node in
case of partial mapping
2) in case of default mapping possible_cpu_arch_ids() is
called after all -numa options are parsed (resulting
in correct mapping).
However it's fragile to rely on late execution of
possible_cpu_arch_ids(), therefore add machine specific
callback that returns node-id for CPU and use it to calculate/
set defaults at machine_numa_finish_init() time when all -numa
options are parsed.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496314408-163972-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
All machines that support user specified cpu_model either call
cpu_generic_init() or cpu_class_by_name()/CPUClass::parse_features
to parse feature string and to get CPU type to create.
Which leads to code duplication and hard-codding default CPU model
within machine_foo_init() code. Which makes it impossible to
get CPU type before machine_init() is run.
So instead of setting default CPUs models and doing parsing in
target specific machine_foo_init() in various ways, provide
a generic data driven cpu_model parsing before machine_init()
is called.
in follow up per target patches, it will allow to:
* define default CPU type in consistent/generic manner
per machine type and drop custom code that fallbacks
to default if cpu_model is NULL
* drop custom features parsing in targets and do it
in centralized way.
* for cases of
cpu_generic_init(TYPE_BASE/DEFAULT_CPU, "some_cpu")
replace it with
cpu_create(machine->cpu_type) || cpu_create(TYPE_FOO)
depending if CPU type is user settable or not.
not doing useless parsing and clearly documenting where
CPU model is user settable or fixed one.
Patch allows machine subclasses to define default CPU type
per machine class at class_init() time and if that is set
generic code will parse cpu_model into a MachineState::cpu_type
which will be used to create CPUs for that machine instance
and allows gradual per board conversion.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1505318697-77161-4-git-send-email-imammedo@redhat.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Define a new MachineClass field ignore_memory_transaction_failures.
If this is flag is true then the CPU will ignore memory transaction
failures which should cause the CPU to take an exception due to an
access to an unassigned physical address; the transaction will
instead return zero (for a read) or be ignored (for a write). This
should be set only by legacy board models which rely on the old
RAZ/WI behaviour for handling devices that QEMU does not yet model.
New board models should instead use "unimplemented-device" for all
memory ranges where the guest will attempt to probe for a device that
QEMU doesn't implement and a stub device is required.
We need this for ARM boards, where we're about to implement support for
generating external aborts on memory transaction failures. Too many
of our legacy board models rely on the RAZ/WI behaviour and we
would break currently working guests when their "probe for device"
code provoked an external abort rather than a RAZ.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1504626814-23124-2-git-send-email-peter.maydell@linaro.org
Add new utility functions which both initialize a RAM
MemoryRegion and arrange for its contents to be migrated;
we give thes the memory_region_init_ram(), memory_region_init_rom()
and memory_region_init_rom_device() names that we just freed up
by renaming the old implementations to _nomigrate().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-6-git-send-email-peter.maydell@linaro.org
Add a documentation comment for memory_region_allocate_system_memory().
In particular, the reason for this function's existence and the
requirement on board code to call it exactly once are non-obvious.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-2-git-send-email-peter.maydell@linaro.org
add machine_run_board_init() wrapper that calls machine
init for now but in follow up patches it will be used
to run generic machine code that should run before
machine init.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1494415802-227633-15-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Introduce machine_set_cpu_numa_node() helper that stores
node mapping for CPU in MachineState::possible_cpus.
CPU and node it belongs to is specified by 'props' argument.
Patch doesn't remove old way of storing mapping in
numa_info[X].node_cpu as removing it at the same time
makes patch rather big. Instead it just mirrors mapping
in possible_cpus and follow up per target patches will
switch to possible_cpus and numa_info[X].node_cpu will
be removed once there isn't any users left.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <1494415802-227633-7-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Originally CPU threads were by default assigned in
round-robin fashion. However it was causing issues in
guest since CPU threads from the same socket/core could
be placed on different NUMA nodes.
Commit fb43b73b (pc: fix default VCPU to NUMA node mapping)
fixed it by grouping threads within a socket on the same node
introducing cpu_index_to_socket_id() callback and commit
20bb648d (spapr: Fix default NUMA node allocation for threads)
reused callback to fix similar issues for SPAPR machine
even though socket doesn't make much sense there.
As result QEMU ended up having 3 default distribution rules
used by 3 targets /virt-arm, spapr, pc/.
In effort of moving NUMA mapping for CPUs into possible_cpus,
generalize default mapping in numa.c by making boards decide
on default mapping and let them explicitly tell generic
numa code to which node a CPU thread belongs to by replacing
cpu_index_to_socket_id() with @cpu_index_to_instance_props()
which provides default node_id assigned by board to specified
cpu_index.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1494415802-227633-2-git-send-email-imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When there are more nodes than available memory to put the minimum
allowed memory by node, all the memory is put on the last node.
This is because we put (ram_size / nb_numa_nodes) &
~((1 << mc->numa_mem_align_shift) - 1); on each node, and in this
case the value is 0. This is particularly true with pseries,
as the memory must be aligned to 256MB.
To avoid this problem, this patch uses an error diffusion algorithm [1]
to distribute equally the memory on nodes.
We introduce numa_auto_assign_ram() function in MachineClass
to keep compatibility between machine type versions.
The legacy function is used with pseries-2.9, pc-q35-2.9 and
pc-i440fx-2.9 (and previous), the new one with all others.
Example:
qemu-system-ppc64 -S -nographic -nodefaults -monitor stdio -m 1G -smp 8 \
-numa node -numa node -numa node \
-numa node -numa node -numa node
Before:
(qemu) info numa
6 nodes
node 0 cpus: 0 6
node 0 size: 0 MB
node 1 cpus: 1 7
node 1 size: 0 MB
node 2 cpus: 2
node 2 size: 0 MB
node 3 cpus: 3
node 3 size: 0 MB
node 4 cpus: 4
node 4 size: 0 MB
node 5 cpus: 5
node 5 size: 1024 MB
After:
(qemu) info numa
6 nodes
node 0 cpus: 0 6
node 0 size: 0 MB
node 1 cpus: 1 7
node 1 size: 256 MB
node 2 cpus: 2
node 2 size: 0 MB
node 3 cpus: 3
node 3 size: 256 MB
node 4 cpus: 4
node 4 size: 256 MB
node 5 cpus: 5
node 5 size: 256 MB
[1] https://en.wikipedia.org/wiki/Error_diffusion
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170502162955.1610-2-lvivier@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: s/ram_size/size/ at numa_default_auto_assign_ram()]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Since commit 224245b ("spapr: Add LMB DR connectors"), NUMA node
memory size must be aligned to 256MB (SPAPR_MEMORY_BLOCK_SIZE).
But when "-numa" option is provided without "mem" parameter,
the memory is equally divided between nodes, but 8MB aligned.
This can be not valid for pseries.
In that case we can have:
$ ./ppc64-softmmu/qemu-system-ppc64 -m 4G -numa node -numa node -numa node
qemu-system-ppc64: Node 0 memory size 0x55000000 is not aligned to 256 MiB
With this patch, we have:
(qemu) info numa
3 nodes
node 0 cpus: 0
node 0 size: 1280 MB
node 1 cpus:
node 1 size: 1280 MB
node 2 cpus:
node 2 size: 1536 MB
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Generic helper machine_query_hotpluggable_cpus() replaced
target specific query_hotpluggable_cpus() callbacks so
there is no need in it anymore. However inon NULL callback
value is used to detect/report hotpluggable cpus support,
therefore it can be removed completely.
Replace it with MachineClass.has_hotpluggable_cpus boolean
which is sufficient for the task.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All callbacks FOO_query_hotpluggable_cpus() are practically
the same except of setting vcpus_count to different values.
Convert them to a generic machine_query_hotpluggable_cpus()
callback by moving vcpus_count initialization to per machine
specific callback possible_cpu_arch_ids().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
so it could be reused for SPAPR cores as well
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fill in CpuInstanceProperties once at board init time and
just copy them whenever query_hotpluggable_cpus() is called.
It will keep topology info always available without need
to recalculate it every time it's needed.
Considering it has NUMA node id, it will be used to keep
NUMA node to cpu mapping instead of numa_info[i].node_cpu
bitmasks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
so that it would be possible to reuse it with
spapr/virt-aarch64 targets.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
make sure that external callers won't try to modify
possible_cpus and owner of possible_cpus can access
it directly when it modifies it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1484759609-264075-5-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Support target CPUs having a page size which isn't knownn
at compile time. To use this, the CPU implementation should:
* define TARGET_PAGE_BITS_VARY
* not define TARGET_PAGE_BITS
* define TARGET_PAGE_BITS_MIN to the smallest value it
might possibly want for TARGET_PAGE_BITS
* call set_preferred_target_page_bits() in its realize
function to indicate the actual preferred target page
size for the CPU (and report any error from it)
In CONFIG_USER_ONLY, the CPU implementation should continue
to define TARGET_PAGE_BITS appropriately for the guest
OS page size.
Machines which want to take advantage of having the page
size something larger than TARGET_PAGE_BITS_MIN must
set the MachineClass minimum_page_bits field to a value
which they guarantee will be no greater than the preferred
page size for any CPU they create.
Note that changing the target page size by setting
minimum_page_bits is a migration compatibility break
for that machine.
For debugging purposes, attempts to use TARGET_PAGE_SIZE
before it has been finally confirmed will assert.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
machine_class_base_init() member name is allocated by
machine_class_base_init(), but not freed by
machine_class_finalize(). Simply freeing there doesn't work,
because DEFINE_PC_MACHINE() overwrites it with a literal string.
Fix DEFINE_PC_MACHINE() not to overwrite it, and add the missing
free to machine_class_finalize().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
It will allow mgmt to query present and hotpluggable CPU objects,
it is required from a target platform that wishes to support command
to implement and set MachineClass.query_hotpluggable_cpus callback,
which will return a list of possible CPU objects with options that
would be needed for hotplugging possible CPU objects.
There are:
'type': 'str' - QOM CPU object type for usage with device_add
'vcpus-count': 'int' - number of logical VCPU threads per
CPU object (mgmt needs to know)
and a set of optional fields that are to used for hotplugging a CPU
objects and would allows mgmt tools to know what/where it could be
hotplugged;
[node],[socket],[core],[thread]
For present CPUs there is a 'qom-path' field which would allow mgmt to
inspect whatever object/abstraction the target platform considers
as CPU object.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Switch to adding compat properties incrementaly instead of
completly overwriting compat_props per machine type.
That removes data duplication which we have due to nested
[PC|SPAPR]_COMPAT_* macros.
It also allows to set default device properties from
default foo_machine_options() hook, which will be used
in following patch for putting VMGENID device as
a function if ISA bridge on pc/q35 machines.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Fixed CCW_COMPAT_* and PC_COMPAT_0_* defines]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
All DisplayType values are just UI options that don't affect any
hardware emulation code, except for DT_NOGRAPHIC. Replace
DT_NOGRAPHIC with DT_NONE plus a new "-machine graphics=on|off"
option, so hardware emulation code don't need to use the
display_type variable.
Cc: Michael Walle <michael@walle.cc>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Entries are inserted in filename order instead of being
appended to the end in case sorting is enabled.
This will avoid any future issues of moving the file creation
around, it doesn't matter what order they are created now,
the will always be in filename order.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Added machine type handling for compatibility. This was
a fairly complex change, this will preserve the order of fw_cfg
for older versions no matter what order the firmware files
actually come in. A list is kept of the correct legacy order
and the entries will be inserted based upon their order in
the list. Except that some entries are ordered (in a specific
area of the list) based upon what order they appear on the
command line. Special handling is added for those entries.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Re-run scripts/clean-includes to apply the previous commit's
corrections and updates. Besides redundant qemu/typedefs.h, this only
finds a redundant config-host.h include in ui/egl-helpers.c. No idea
how that escaped the previous runs.
Some manual whitespace trimming around dropped includes squashed in.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change all machine_init() users that simply call type_register*()
to use type_init().
Cc: Evgeny Voevodin <e.voevodin@samsung.com>
Cc: Maksim Kozlov <m.kozlov@samsung.com>
Cc: Igor Mitsyanko <i.mitsyanko@gmail.com>
Cc: Dmitry Solodkiy <d.solodkiy@samsung.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
on x86 currently range 0..max_cpus is used to generate
architecture-dependent CPU ID (APIC Id) for each present
and possible CPUs. However architecture-dependent CPU IDs
list could be sparse and code that needs to enumerate
all IDs (ACPI) ended up doing guess work enumerating all
possible and impossible IDs up to
apic_id_limit = x86_cpu_apic_id_from_index(max_cpus).
That leads to creation of MADT entries and Processor
objects in ACPI tables for not possible CPUs.
Fix it by allowing board specify a concrete list of
CPU IDs accourding its own rules (which for x86 depends
on topology). So that code that needs this list could
request it from board instead of trying to guess
what IDs are correct on its own.
This interface will also allow to help making AML
part of CPU hotplug target independent so it could
be reused for ARM target.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Migration of pseries-2.3 doesn't have configuration section. Unfortunately,
QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration
section, and break migration both ways.
This patch introduces a property which allows to enforce a configuration
section for machines who don't have one.
It can be set at startup:
-machine enforce-config-section=on
or later from the QEMU monitor:
qom-set /machine enforce-config-section on
It is up to the tooling to set or unset this property according to the
version of the QEMU at the other end of the pipe.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The field is always set to zero, so it is not necessary anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
pc.h defines a SET_MACHINE_COMPAT macro to make setting up compat_props
for the various PC machine versions less verbose. There's nothing
inherently PC specific about it, though, so move it to boards.h where other
versioned machine types (like pseries-*) can use it.
While we're doing that, change it's indentation to be a bit more regular.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
This way, these settings can be simply set on the corresponding
machine_options() function, instead of requiring code in
pc_compat_*() functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This patch adds the initial plumbing for split IRQ chip mode via
KVM_CAP_SPLIT_IRQCHIP. In addition to option processing, a number of
kvm_*_in_kernel macros are defined to help clarify which component is
where.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two issues with qemu_hw_version() today:
1) If a machine has hw_version set, the value returned by it is
not very useful, because it is not the actual QEMU version.
2) If a machine does't set hw_version, the return value of
qemu_hw_version() is broken, because it will change when
upgrading QEMU.
For those reasons, using qemu_hw_version() is strongly
discouraged, and should be used only in code that used
QEMU_VERSION in the past and needs to keep compatibility.
To fix (2), instead of making every machine broken by default
unless they set hw_version, make qemu_hw_version() simply return
"2.5+" if qemu_set_hw_version() is not called.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The helper function machine_iommu() isn't necesary. We can
directly check for the property.
Signed-off-by: Bandan Das <bsd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
The struct is not used anymore and can be eliminated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The macro will allow easy registration of a TYPE_MACHINE subclass, using
only the machine name and a MachineClass initialization function as
parameter.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The macro will be useful to ensure the machine class names follow the
right format to make machine class lookup by class name work correctly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some kernels program a 0 address for io regions. PCI 3.0 spec
section 6.2.5.1 doesn't seem to disallow this.
based on patch by Michael Roth <mdroth@linux.vnet.ibm.com>
Add pci_allow_0_addr in MachineClass to conditionally
allow addr 0 for pseries, as this can break other architectures.
This patch allows to hotplug PCI card in pseries machine, as the first
added card BAR0 is always set to 0 address.
This as a temporary hack, waiting to fix PCI memory priorities for more
machine types...
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This interface provides some registers within a 32-byte range and can be
acessed through PCI-to-LPC bridge interface (PMBASE + 0x60).
It's commonly used as a watchdog timer to detect system lockups through
SMIs that are generated -- if TCO_EN bit is set -- on every timeout. If
NO_REBOOT bit is not set in GCS (General Control and Status register),
the system will be resetted upon second timeout if TCO_RLD register
wasn't previously written to prevent timeout.
This patch adds support to TCO watchdog logic and few other features
like mapping NMIs to SMIs (NMI2SMI_EN bit), system intruder detection,
etc. are not implemented yet.
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Machines types can have different requirement for default ram
size. Introduce a member in the machine class and set the current
default_ram_size to 128MB.
For QEMUMachine types override the value during the registration of
the machine and for MachineClass introduce the generic class init
setting the default_ram_size.
Add helpers [K,M,G,T,P,E]_BYTE for better readability and easy usage
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This removes the following fields from QEMUMachine: family, alias,
reset, hot_add_cpu, units_per_default_bus, no_serial, no_parallel,
use_virtcon, use_sclp, no_floppy, no_cdrom, default_display,
compat_props, and hw_version.
The only users of those fields were already converted to use QOM and
MachineClass directly, so they are not needed anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Capture the explicit setting of "usb=no" into a separate bool, and
use it to skip the update of machine->usb in the board init function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Current default round-robin way of distributing VCPUs among
NUMA nodes might be wrong in case on multi-core/threads
CPUs. Making guests confused wrt topology where cores from
the same socket are on different nodes.
Allow a machine to override default mapping by providing
MachineClass::cpu_index_to_socket_id()
callback which would allow it group VCPUs from a socket
on the same NUMA node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We now always send a JSON blob describing the migration file format as part
of the migration stream. However, some tools built around QEMU have proven
to stumble over this.
This patch gives the user the chance to disable said self-describing part of
the migration stream. To disable vmdesc submission, just add
-machine suppress-vmdesc=on
to your QEMU command line.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
As noted by Andreas, hw/boards.h shouldn't be used outside softmmu code.
Include it conditionally, and drop the (now unnecessary) ifdef guards in
hw/boards.h
Reported-by: Andreas Färber <afaerber@suse.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Running
qemu-bin ... -machine pc,mem-merge=on
leads to crash:
x86_64-softmmu/qemu-system-x86_64 -machine pc,dump-guest-core=on
qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed. Aborted
(core dumped)
This happens because the commit e79d5a6 ("machine: remove qemu_machine_opts
global list") removed the global option descriptions and moved them to
MachineState's QOM properties.
Fix this by querying machine properties through designated wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Running
qemu-bin ... -machine pc,dump-guest-core=on
leads to crash:
x86_64-softmmu/qemu-system-x86_64 -machine pc,dump-guest-core=on
qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed. Aborted
(core dumped)
This happens because the commit e79d5a6 ("machine: remove qemu_machine_opts
global list") removed the global option descriptions and moved them to
MachineState's QOM properties.
Fix this by querying machine properties through designated wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Make it safe to include hw/boards.h in exec.c
for linux-user configurations.
We don't need any of its contents though.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit e79d5a6 ("machine: remove qemu_machine_opts global list") removed
the global option descriptions and moved them to MachineState's QOM
properties.
Query phandle-start by accessing machine properties through designated
wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e79d5a6 ("machine: remove qemu_machine_opts global list") removed
the global option descriptions and moved them to MachineState's QOM
properties.
Query kvm-shadow-mem by accessing machine properties through designated
wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The code using kernel-irqchip property requires 'allowed/required'
functionality. Replace machine's kernel_irqchip field with two fields
representing the new functionality and expose them through wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes a QEMU crash when passing iommu parameter in command line.
Running
x86_64-softmmu/qemu-system-x86_64 -machine pc,iommu=on -enable-kvm
leads to crash:
qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed.
Aborted (core dumped)
This happens because commit e79d5a6 ("machine: remove qemu_machine_opts global
list") removed the global option descriptions and moved them to MachineState's
QOM properties.
Fix this by querying machine properties through designated wrappers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Following QOM convention, object properties should
not be accessed directly.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-3-git-send-email-marcel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we can properly map sysbus devices that haven't been connected to
something forcefully by C code, we can allow the -device command line option
to spawn them.
For machines that don't implement dynamic sysbus assignment in their board
files we add a new bool "has_dynamic_sysbus" to the machine class.
When that property is false (default), we bail out when we see dynamically
spawned sysbus devices, like we did before.
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows machine classes to specify which display device they want
as default. If unspecified the current behavior (try cirrus, failing
that try stdvga, failing that use no display) will be used.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 261747f1 ("vl: Use MachineClass instead of global QEMUMachine
list") broke the ordering of the machine types in the user-visible output
of
qemu-system-XXXX -M \?
This occurred because registration was rebased from a manually maintained
linked list to GLib hash tables:
qemu_register_machine()
type_register()
type_register_internal()
type_table_add()
g_hash_table_insert()
and because the listing was rebased accordingly, from the traversal of the
list to the traversal of the hash table (rendered as an ad-hoc list):
machine_parse()
object_class_get_list(TYPE_MACHINE)
object_class_foreach()
g_hash_table_foreach()
The current order is a "random" one, for practical purposes, which is
annoying for users.
Introduce new members QEMUMachine.family and MachineClass.family, allowing
machine types to be "clustered". Introduce a comparator function that
establishes a total ordering between machine types, ordering machine types
in the same family next to each other. In machine_parse(), list the
supported machine types sorted with the comparator function.
The comparator function:
- sorts whole families before standalone machine types,
- sorts whole families between each other in alphabetically increasing
order,
- sorts machine types inside the same family in alphabetically decreasing
order,
- sorts standalone machine types between each other in alphabetically
increasing order.
After this patch, all machine types are considered standalone, and
accordingly, the output is alphabetically ascending. This will be refined
in the following patches.
Effects on the x86_64 output:
Before:
> Supported machines are:
> pc-0.13 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.0 Standard PC (i440FX + PIIX, 1996)
> pc-1.0 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.1 Standard PC (i440FX + PIIX, 1996)
> pc-q35-1.7 Standard PC (Q35 + ICH9, 2009)
> pc-1.1 Standard PC (i440FX + PIIX, 1996)
> pc-0.14 Standard PC (i440FX + PIIX, 1996)
> pc-q35-2.0 Standard PC (Q35 + ICH9, 2009)
> pc-i440fx-1.4 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.5 Standard PC (i440FX + PIIX, 1996)
> pc-0.15 Standard PC (i440FX + PIIX, 1996)
> pc-q35-1.4 Standard PC (Q35 + ICH9, 2009)
> isapc ISA-only PC
> pc Standard PC (i440FX + PIIX, 1996) (alias of pc-i440fx-2.2)
> pc-i440fx-2.2 Standard PC (i440FX + PIIX, 1996) (default)
> pc-1.2 Standard PC (i440FX + PIIX, 1996)
> pc-0.10 Standard PC (i440FX + PIIX, 1996)
> pc-0.11 Standard PC (i440FX + PIIX, 1996)
> pc-q35-2.1 Standard PC (Q35 + ICH9, 2009)
> q35 Standard PC (Q35 + ICH9, 2009) (alias of pc-q35-2.2)
> pc-q35-2.2 Standard PC (Q35 + ICH9, 2009)
> pc-i440fx-1.6 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.7 Standard PC (i440FX + PIIX, 1996)
> none empty machine
> pc-q35-1.5 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.6 Standard PC (Q35 + ICH9, 2009)
> pc-0.12 Standard PC (i440FX + PIIX, 1996)
> pc-1.3 Standard PC (i440FX + PIIX, 1996)
After:
> Supported machines are:
> isapc ISA-only PC
> none empty machine
> pc-0.10 Standard PC (i440FX + PIIX, 1996)
> pc-0.11 Standard PC (i440FX + PIIX, 1996)
> pc-0.12 Standard PC (i440FX + PIIX, 1996)
> pc-0.13 Standard PC (i440FX + PIIX, 1996)
> pc-0.14 Standard PC (i440FX + PIIX, 1996)
> pc-0.15 Standard PC (i440FX + PIIX, 1996)
> pc-1.0 Standard PC (i440FX + PIIX, 1996)
> pc-1.1 Standard PC (i440FX + PIIX, 1996)
> pc-1.2 Standard PC (i440FX + PIIX, 1996)
> pc-1.3 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.4 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.5 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.6 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.7 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.0 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.1 Standard PC (i440FX + PIIX, 1996)
> pc Standard PC (i440FX + PIIX, 1996) (alias of pc-i440fx-2.2)
> pc-i440fx-2.2 Standard PC (i440FX + PIIX, 1996) (default)
> pc-q35-1.4 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.5 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.6 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.7 Standard PC (Q35 + ICH9, 2009)
> pc-q35-2.0 Standard PC (Q35 + ICH9, 2009)
> pc-q35-2.1 Standard PC (Q35 + ICH9, 2009)
> q35 Standard PC (Q35 + ICH9, 2009) (alias of pc-q35-2.2)
> pc-q35-2.2 Standard PC (Q35 + ICH9, 2009)
Effects on the aarch64 output:
Before:
> Supported machines are:
> lm3s811evb Stellaris LM3S811EVB
> canon-a1100 Canon PowerShot A1100 IS
> vexpress-a15 ARM Versatile Express for Cortex-A15
> vexpress-a9 ARM Versatile Express for Cortex-A9
> xilinx-zynq-a9 Xilinx Zynq Platform Baseboard for Cortex-A9
> connex Gumstix Connex (PXA255)
> n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
> lm3s6965evb Stellaris LM3S6965EVB
> versatileab ARM Versatile/AB (ARM926EJ-S)
> borzoi Borzoi PDA (PXA270)
> tosa Tosa PDA (PXA255)
> cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
> midway Calxeda Midway (ECX-2000)
> mainstone Mainstone II (PXA27x)
> n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
> terrier Terrier PDA (PXA270)
> highbank Calxeda Highbank (ECX-1000)
> cubieboard cubietech cubieboard
> sx1-v1 Siemens SX1 (OMAP310) V1
> sx1 Siemens SX1 (OMAP310) V2
> realview-eb-mpcore ARM RealView Emulation Baseboard (ARM11MPCore)
> kzm ARM KZM Emulation Baseboard (ARM1136)
> akita Akita PDA (PXA270)
> z2 Zipit Z2 (PXA27x)
> musicpal Marvell 88w8618 / MusicPal (ARM926EJ-S)
> realview-pb-a8 ARM RealView Platform Baseboard for Cortex-A8
> versatilepb ARM Versatile/PB (ARM926EJ-S)
> realview-eb ARM RealView Emulation Baseboard (ARM926EJ-S)
> realview-pbx-a9 ARM RealView Platform Baseboard Explore for Cortex-A9
> spitz Spitz PDA (PXA270)
> none empty machine
> virt ARM Virtual Machine
> collie Collie PDA (SA-1110)
> smdkc210 Samsung SMDKC210 board (Exynos4210)
> verdex Gumstix Verdex (PXA270)
> nuri Samsung NURI board (Exynos4210)
> integratorcp ARM Integrator/CP (ARM926EJ-S)
After:
> Supported machines are:
> akita Akita PDA (PXA270)
> borzoi Borzoi PDA (PXA270)
> canon-a1100 Canon PowerShot A1100 IS
> cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
> collie Collie PDA (SA-1110)
> connex Gumstix Connex (PXA255)
> cubieboard cubietech cubieboard
> highbank Calxeda Highbank (ECX-1000)
> integratorcp ARM Integrator/CP (ARM926EJ-S)
> kzm ARM KZM Emulation Baseboard (ARM1136)
> lm3s6965evb Stellaris LM3S6965EVB
> lm3s811evb Stellaris LM3S811EVB
> mainstone Mainstone II (PXA27x)
> midway Calxeda Midway (ECX-2000)
> musicpal Marvell 88w8618 / MusicPal (ARM926EJ-S)
> n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
> n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
> none empty machine
> nuri Samsung NURI board (Exynos4210)
> realview-eb ARM RealView Emulation Baseboard (ARM926EJ-S)
> realview-eb-mpcore ARM RealView Emulation Baseboard (ARM11MPCore)
> realview-pb-a8 ARM RealView Platform Baseboard for Cortex-A8
> realview-pbx-a9 ARM RealView Platform Baseboard Explore for Cortex-A9
> smdkc210 Samsung SMDKC210 board (Exynos4210)
> spitz Spitz PDA (PXA270)
> sx1 Siemens SX1 (OMAP310) V2
> sx1-v1 Siemens SX1 (OMAP310) V1
> terrier Terrier PDA (PXA270)
> tosa Tosa PDA (PXA255)
> verdex Gumstix Verdex (PXA270)
> versatileab ARM Versatile/AB (ARM926EJ-S)
> versatilepb ARM Versatile/PB (ARM926EJ-S)
> vexpress-a15 ARM Versatile Express for Cortex-A15
> vexpress-a9 ARM Versatile Express for Cortex-A9
> virt ARM Virtual Machine
> xilinx-zynq-a9 Xilinx Zynq Platform Baseboard for Cortex-A9
> z2 Zipit Z2 (PXA27x)
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1145042
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUNo9yAAoJEBRUblpOawnXQDkH/1M5DxmVwUv+SZtHEdpsT7Eq
UGjRzfYXsYP/WkEqxVzYJmN0HJn9z8uJZin/dqwDPQLjCy8gf/xuaNCfoZqMuxHw
iNaTgKpi9Uy0G0VWxjlZpRu8f5JjqHbJEP6aTT0hooBHaqQoBSm1fQh/pnCUvnpB
qDQeHcOjrzIMkQJ3Ji8z2s+CapHaiIa63hJqRJztS5vbonPjngjj87dA54eIqDtQ
RwXy58y+C8YMKqfpOG6lA+RxogESyyCfDBVUA1wwRDad1mOFKUMtEd4jAL39HUgR
qINSKybG12V2bx8E+vNbaKB+68+NLdxcyR39JR2aun+a8yw+yDcF5BBiMXlqV0U=
=4bqy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Four changes here. Polling for reconnection of character devices,
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.
# gpg: Signature made Thu 09 Oct 2014 14:36:50 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (28 commits)
qemu-char: Fix reconnect socket error reporting
qemu-sockets: Add error to non-blocking connect handler
qemu-error: Add error_vreport()
virtio-scsi: fix use-after-free of VirtIOSCSIReq
linuxboot: compute initrd loading address
kvm: Make KVMState be the TYPE_KVM_ACCEL instance struct
accel: Create accel object when initializing machine
accel: Pass MachineState object to accel init functions
accel: Rename 'init' method to 'init_machine'
accel: Move accel init/allowed code to separate function
accel: Remove tcg_available() function
accel: Move qtest accel registration to qtest.c
accel: Move Xen registration code to xen-common.c
accel: Move KVM accel registration to kvm-all.c
accel: Report unknown accelerator as "not found" instead of "does not exist"
accel: Make AccelClass.available() optional
accel: Use QOM classes for accel types
accel: Move accel name lookup to separate function
accel: Simplify configure_accelerator() using AccelType *acc variable
accel: Create AccelType typedef
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create an actual TYPE_ACCEL object when initializing a machine. This
will allow accelerator classes to implement some initialization on
instance_init, and to save state on the TYPE_ACCEL object.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most of the machine options and machine state information is in the
MachineState object, not on the MachineClass. This will allow init
functions to use the MachineState object directly instead of
qemu_get_machine_opts() or the current_machine global.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the 'units_per_default_bus' property which
allows individual boards to declare their desired
index => (bus,unit) mapping for their default HBA, so that
boards such as Q35 can specify that its default if_ide HBA,
AHCI, only accepts one unit per bus.
This property only overrides the mapping for drives matching
the block_default_type interface.
This patch also adds this property to *all* past and present
Q35 machine types. This retroactive addition is justified
because the previous erroneous index=>(bus,unit) mappings
caused by lack of such a property were not utilized due to
lack of initialization code in the Q35 init routine.
Further, semantically, the Q35 board type has always had the
property that its default HBA, AHCI, only accepts one unit per
bus. The new code added to add devices to drives relies upon
the accuracy of this mapping. Thus, the property is applied
retroactively to reduce complexity of allowing IDE HBAs with
different units per bus.
Examples:
Prior to this patch, all IDE HBAs were assumed to use 2 units
per bus (Master, Slave). When using Q35 and AHCI, however, we
only allow one unit per bus.
-hdb foo.qcow2 would become index=1, or bus=0,unit=1.
-hdd foo.qcow2 would become index=3, or bus=1,unit=1.
-drive file=foo.qcow2,index=5 becomes bus=2,unit=1.
These are invalid for AHCI. They now become, under Q35 only:
-hdb foo.qcow2 --> index=1, bus=1, unit=0.
-hdd foo.qcow2 --> index=3, bus=3, unit=0.
-drive file=foo.qcow2,index=5 --> bus=5,unit=0.
The mapping is adjusted based on the fact that the default IF
for the Q35 machine type is IF_IDE, and units-per-default-bus
overrides the IDE mapping from its default of 2 units per bus
to just 1 unit per bus.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add Intel IOMMU emulation to q35 chipset and expose it to the guest.
1. Add a machine option. Users can use "-machine iommu=on|off" in the command
line to enable/disable Intel IOMMU. The default is off.
2. Accroding to the machine option, q35 will initialize the Intel IOMMU and
use pci_setup_iommu() to setup q35_host_dma_iommu() as the IOMMU function for
the pci bus.
3. q35_host_dma_iommu() will return different address space according to the
bus_num and devfn of the device.
Signed-off-by: Le Tan <tamlokveer@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: resolve conflicts
Add get_hotplug_handler() method to machine, and
make bus-less device use it during hotplug
as a means to discover a hotplug handler controller.
The returned controller is used to perform hotplug
actions.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add following parameters:
"slots" - total number of hotplug memory slots
"maxmem" - maximum possible memory
"slots" and "maxmem" should go in pair and "maxmem" should be greater
than "mem" for memory hotplug to be enabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: fix build on 32 bit
Make machine's QemuOpts QOM properties of /machine. The properties
are automatically filled in. This opens the possibility to create
opts per machine rather than global.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields
are copied into MachineState. Removed duplicated fields from MachineState.
All the other changes are only mechanical refactoring, no semantic changes.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390)
Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC)
[AF: Renamed ms -> machine, use MACHINE_GET_CLASS()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
No need to go through qemu_machine field. Use
MachineClass fields directly.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This minimizes QEMUMachine usage, as part of machine QOM-ification.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
QEMUMachine's fields are already in MachineClass. We can safely
make the switch because we copy them in machine_class_init() and
spapr_machine_class_init().
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In order to eliminate the QEMUMachine indirection,
add its fields directly to MachineClass.
Do not yet remove qemu_machine field because it is
still in use by sPAPR.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
[AF: Copied fields for sPAPR, too]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This field shouldn't be used any more since we
adopted the QOM way of iterating over the types.
The commit that obsoleted it is:
commit 261747f176
vl: Use MachineClass instead of global QEMUMachine list
The machine registration flow is refactored to use the QOM functionality.
Instead of linking the machines into a list, each machine has a type
and the types can be traversed in the QOM way.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Machine rewriting added MACHINE() macro which is
already in use by other OpenBSD library.
Since qemu/sockets.h exposes the OpenBSD namespace,
the minimalistic approach is to add it as the first QEMU include.
Reported-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
As reported in commit 9c06a1f79f, xen.h is
not self-contained with regards to its use of QEMUMachine. Fix this.
Reported-by: Alexander Graf <agraf@suse.de>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This reverts commit 9c06a1f79f.
The new header sysemu/qemumachine.h is undesired.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In order to allow attaching machine options to a machine instance,
current_machine is converted into MachineState.
As a first step of deprecating QEMUMachine, some of the functions
were modified to return MachineClass.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The machine registration flow is refactored to use the QOM functionality.
Instead of linking the machines into a list, each machine has a type
and the types can be traversed in the QOM way.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The main functional change is to convert QEMUMachine into MachineClass
and QEMUMachineInitArgs into MachineState, instance of MachineClass.
As a first step, in order to make possible an incremental development,
both QEMUMachine and QEMUMachineInitArgs are being embedded into the
new types.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Targets like ppc64 support different types of KVM, one which use
hypervisor mode and the other which doesn't. Add a new machine
option kvm-type that helps in selecting the respective ones
We also add a new QEMUMachine callback get_vm_type that helps
in mapping the string representation of kvm type specified.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[agraf: spelling fixes, use error_report(), use qemumachine.h]
Signed-off-by: Alexander Graf <agraf@suse.de>
Older gcc versions (such as the one in SLES11) get confused when you declare
a typedef on the same struct twice.
To work around that limitation, let's extract the QEMUMachine typedef into a
separate header file that is guarded by preprocessor duplicate include checks.
This fixes the following type of compile errors for me:
In file included from vl.c:125:
include/hw/xen/xen.h:39: error: redefinition of typedef "QEMUMachine"
include/sysemu/kvm.h:155: error: previous declaration of "QEMUMachine" was here
Signed-off-by: Alexander Graf <agraf@suse.de>
Marc-André Lureau