Also we change the 2nd parameter of it to be the relative offset
within the memory region. This is to be used in follow up patches.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190603065056.25211-6-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
These helpers copy the source bitmap to destination bitmap with a
shift either on the src or dst bitmap.
Meanwhile, we never have bitmap tests but we should.
This patch also introduces the initial test cases for utils/bitmap.c
but it only tests the newly introduced functions.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190603065056.25211-5-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
Bitmap test used sizeof(unsigned long) instead of BITS_PER_LONG.
Similar to 9460dee4b2 ("memory: do not touch code dirty bitmap unless
TCG is enabled", 2015-06-05) but for the migration bitmap - we can
skip the MIGRATION bitmap update if migration not enabled.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190603065056.25211-4-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
cpu_physical_memory_sync_dirty_bitmap() has one RAMBlock* as
parameter, which means that it must be with RCU read lock held
already. Taking it again inside seems redundant. Removing it.
Instead comment on the functions about the RCU read lock.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190603065056.25211-2-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In case we gets a queued page, the order of block is interrupted. We may
not rely on the complete_round flag to say we have already searched the
whole blocks on the list.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190605010828.6969-1-richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Notification from recv thread is not ordered, which means we may be
notified by one MultiFDRecvParams but adjust packet_num for another.
Move the adjustment after we are sure each recv thread are sync-ed.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190604023540.26532-1-richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since we will not operate on the next address pointed by out, it is not
necessary to do addition on it.
After removing the operation, the function size reduced 16/18 bytes.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190610030852.16039-2-richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When we are not in the last_stage, we need to update the cache if page
is not the same.
Currently this procedure is scattered in two places and mixed with
encoding status check.
This patch extract this general step out to make the code a little bit
easy to read.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190610004159.20966-1-richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
On receiving RAM_SAVE_FLAG_EOS, multifd_recv_sync_main() is called to
synchronize receive threads. Current synchronization mechanism is to wait
for each channel's sem_sync semaphore. This semaphore is triggered by a
packet with MULTIFD_FLAG_SYNC flag. While in current implementation, we
don't do multifd_send_sync_main() to send such packet when
blk_mig_bulk_active() is true.
This will leads to the receive threads won't notify
multifd_recv_sync_main() by sem_sync. And multifd_recv_sync_main() will
always wait there.
[Note]: normal migration test works, while didn't test the
blk_mig_bulk_active() case. Since not sure how to produce this
situation.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190612014337.11255-1-richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We would need _str ones on the next patch.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It uses num in multifd_send(). Make it coherent.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In the M-profile architecture, when we do a vector table fetch and it
fails, we need to report a HardFault. Whether this is a Secure HF or
a NonSecure HF depends on several things. If AIRCR.BFHFNMINS is 0
then HF is always Secure, because there is no NonSecure HardFault.
Otherwise, the answer depends on whether the 'underlying exception'
(MemManage, BusFault, SecureFault) targets Secure or NonSecure. (In
the pseudocode, this is handled in the Vector() function: the final
exc.isSecure is calculated by looking at the exc.isSecure from the
exception returned from the memory access, not the isSecure input
argument.)
We weren't doing this correctly, because we were looking at
the target security domain of the exception we were trying to
load the vector table entry for. This produces errors of two kinds:
* a load from the NS vector table which hits the "NS access
to S memory" SecureFault should end up as a Secure HardFault,
but we were raising an NS HardFault
* a load from the S vector table which causes a BusFault
should raise an NS HardFault if BFHFNMINS == 1 (because
in that case all BusFaults are NonSecure), but we were raising
a Secure HardFault
Correct the logic.
We also fix a comment error where we claimed that we might
be escalating MemManage to HardFault, and forgot about SecureFault.
(Vector loads can never hit MPU access faults, because they're
always aligned and always use the default address map.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190705094823.28905-1-peter.maydell@linaro.org
The ARMv5 architecture didn't specify detailed per-feature ID
registers. Now that we're using the MVFR0 register fields to
gate the existence of VFP instructions, we need to set up
the correct values in the cpu->isar structure so that we still
provide an FPU to the guest.
This fixes a regression in the arm926 and arm1026 CPUs, which
are the only ones that both have VFP and are ARMv5 or earlier.
This regression was introduced by the VFP refactoring, and more
specifically by commits 1120827fa1 and 266bd25c48,
which accidentally disabled VFP short-vector support and
double-precision support on these CPUs.
Fixes: 1120827fa1
Fixes: 266bd25c48
Fixes: https://bugs.launchpad.net/qemu/+bug/1836192
Reported-by: Christophe Lyon <christophe.lyon@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Christophe Lyon <christophe.lyon@linaro.org>
Message-id: 20190711131241.22231-1-peter.maydell@linaro.org
The PL031 RTC tracks the difference between the guest RTC
and the host RTC using a tick_offset field. For migration,
however, we currently always migrate the offset between
the guest and the vm_clock, even if the RTC clock is not
the same as the vm_clock; this was an attempt to retain
migration backwards compatibility.
Unfortunately this results in the RTC behaving oddly across
a VM state save and restore -- since the VM clock stands still
across save-then-restore, regardless of how much real world
time has elapsed, the guest RTC ends up out of sync with the
host RTC in the restored VM.
Fix this by migrating the raw tick_offset. To retain migration
compatibility as far as possible, we have a new property
migrate-tick-offset; by default this is 'true' and we will
migrate the true tick offset in a new subsection; if the
incoming data has no subsection we fall back to the old
vm_clock-based offset information, so old->new migration
compatibility is preserved. For complete new->old migration
compatibility, the property is set to 'false' for 4.0 and
earlier machine types (this will only affect 'virt-4.0'
and below, as none of the other pl031-using machines are
versioned).
Reported-by: Russell King <rmk@armlinux.org.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20190709143912.28905-1-peter.maydell@linaro.org
Using the whole 128 MiB flash in non-secure mode is not working because
virt_flash_fdt() expects the same address for secure_sysmem and sysmem.
This is not correctly handled by caller because it forwards NULL for
secure_sysmem in non-secure flash mode.
Fixed by using sysmem when secure_sysmem is NULL.
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Message-id: 20190712075002.14326-1-david.engraf@sysgo.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the previous commit we fixed a crash when the guest read a
register that pop from an empty FIFO.
By auditing the repository, we found another similar use with
an easy way to reproduce:
$ qemu-system-aarch64 -M xlnx-zcu102 -monitor stdio -S
QEMU 4.0.50 monitor - type 'help' for more information
(qemu) xp/b 0xfd4a0134
Aborted (core dumped)
(gdb) bt
#0 0x00007f6936dea57f in raise () at /lib64/libc.so.6
#1 0x00007f6936dd4895 in abort () at /lib64/libc.so.6
#2 0x0000561ad32975ec in xlnx_dp_aux_pop_rx_fifo (s=0x7f692babee70) at hw/display/xlnx_dp.c:431
#3 0x0000561ad3297dc0 in xlnx_dp_read (opaque=0x7f692babee70, offset=77, size=4) at hw/display/xlnx_dp.c:667
#4 0x0000561ad321b896 in memory_region_read_accessor (mr=0x7f692babf620, addr=308, value=0x7ffe05c1db88, size=4, shift=0, mask=4294967295, attrs=...) at memory.c:439
#5 0x0000561ad321bd70 in access_with_adjusted_size (addr=308, value=0x7ffe05c1db88, size=1, access_size_min=4, access_size_max=4, access_fn=0x561ad321b858 <memory_region_read_accessor>, mr=0x7f692babf620, attrs=...) at memory.c:569
#6 0x0000561ad321e9d5 in memory_region_dispatch_read1 (mr=0x7f692babf620, addr=308, pval=0x7ffe05c1db88, size=1, attrs=...) at memory.c:1420
#7 0x0000561ad321ea9d in memory_region_dispatch_read (mr=0x7f692babf620, addr=308, pval=0x7ffe05c1db88, size=1, attrs=...) at memory.c:1447
#8 0x0000561ad31bd742 in flatview_read_continue (fv=0x561ad69c04f0, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1, addr1=308, l=1, mr=0x7f692babf620) at exec.c:3385
#9 0x0000561ad31bd895 in flatview_read (fv=0x561ad69c04f0, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1) at exec.c:3423
#10 0x0000561ad31bd90b in address_space_read_full (as=0x561ad5bb3020, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1) at exec.c:3436
#11 0x0000561ad33b1c42 in address_space_read (len=1, buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", attrs=..., addr=4249485620, as=0x561ad5bb3020) at include/exec/memory.h:2131
#12 0x0000561ad33b1c42 in memory_dump (mon=0x561ad59c4530, count=1, format=120, wsize=1, addr=4249485620, is_physical=1) at monitor/misc.c:723
#13 0x0000561ad33b1fc1 in hmp_physical_memory_dump (mon=0x561ad59c4530, qdict=0x561ad6c6fd00) at monitor/misc.c:795
#14 0x0000561ad37b4a9f in handle_hmp_command (mon=0x561ad59c4530, cmdline=0x561ad59d0f22 "/b 0x00000000fd4a0134") at monitor/hmp.c:1082
Fix by checking the FIFO is not empty before popping from it.
The datasheet is not clear about the reset value of this register,
we choose to return '0'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190709113715.7761-4-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reading the RX_DATA register when the RX_FIFO is empty triggers
an abort. This can be easily reproduced:
$ qemu-system-arm -M emcraft-sf2 -monitor stdio -S
QEMU 4.0.50 monitor - type 'help' for more information
(qemu) x 0x40001010
Aborted (core dumped)
(gdb) bt
#1 0x00007f035874f895 in abort () at /lib64/libc.so.6
#2 0x00005628686591ff in fifo8_pop (fifo=0x56286a9a4c68) at util/fifo8.c:66
#3 0x00005628683e0b8e in fifo32_pop (fifo=0x56286a9a4c68) at include/qemu/fifo32.h:137
#4 0x00005628683e0efb in spi_read (opaque=0x56286a9a4850, addr=4, size=4) at hw/ssi/mss-spi.c:168
#5 0x0000562867f96801 in memory_region_read_accessor (mr=0x56286a9a4b60, addr=16, value=0x7ffeecb0c5c8, size=4, shift=0, mask=4294967295, attrs=...) at memory.c:439
#6 0x0000562867f96cdb in access_with_adjusted_size (addr=16, value=0x7ffeecb0c5c8, size=4, access_size_min=1, access_size_max=4, access_fn=0x562867f967c3 <memory_region_read_accessor>, mr=0x56286a9a4b60, attrs=...) at memory.c:569
#7 0x0000562867f99940 in memory_region_dispatch_read1 (mr=0x56286a9a4b60, addr=16, pval=0x7ffeecb0c5c8, size=4, attrs=...) at memory.c:1420
#8 0x0000562867f99a08 in memory_region_dispatch_read (mr=0x56286a9a4b60, addr=16, pval=0x7ffeecb0c5c8, size=4, attrs=...) at memory.c:1447
#9 0x0000562867f38721 in flatview_read_continue (fv=0x56286aec6360, addr=1073745936, attrs=..., buf=0x7ffeecb0c7c0 "\340ǰ\354\376\177", len=4, addr1=16, l=4, mr=0x56286a9a4b60) at exec.c:3385
#10 0x0000562867f38874 in flatview_read (fv=0x56286aec6360, addr=1073745936, attrs=..., buf=0x7ffeecb0c7c0 "\340ǰ\354\376\177", len=4) at exec.c:3423
#11 0x0000562867f388ea in address_space_read_full (as=0x56286aa3e890, addr=1073745936, attrs=..., buf=0x7ffeecb0c7c0 "\340ǰ\354\376\177", len=4) at exec.c:3436
#12 0x0000562867f389c5 in address_space_rw (as=0x56286aa3e890, addr=1073745936, attrs=..., buf=0x7ffeecb0c7c0 "\340ǰ\354\376\177", len=4, is_write=false) at exec.c:3466
#13 0x0000562867f3bdd7 in cpu_memory_rw_debug (cpu=0x56286aa19d00, addr=1073745936, buf=0x7ffeecb0c7c0 "\340ǰ\354\376\177", len=4, is_write=0) at exec.c:3976
#14 0x000056286811ed51 in memory_dump (mon=0x56286a8c32d0, count=1, format=120, wsize=4, addr=1073745936, is_physical=0) at monitor/misc.c:730
#15 0x000056286811eff1 in hmp_memory_dump (mon=0x56286a8c32d0, qdict=0x56286b15c400) at monitor/misc.c:785
#16 0x00005628684740ee in handle_hmp_command (mon=0x56286a8c32d0, cmdline=0x56286a8caeb2 "0x40001010") at monitor/hmp.c:1082
From the datasheet "Actel SmartFusion Microcontroller Subsystem
User's Guide" Rev.1, Table 13-3 "SPI Register Summary", this
register has a reset value of 0.
Check the FIFO is not empty before accessing it, else log an
error message.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190709113715.7761-3-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both lqspi_read() and lqspi_load_cache() expect a 32-bit
aligned address.
>From UG1085 datasheet [*] chapter on 'Quad-SPI Controller':
Transfer Size Limitations
Because of the 32-bit wide TX, RX, and generic FIFO, all
APB/AXI transfers must be an integer multiple of 4-bytes.
Shorter transfers are not possible.
Set MemoryRegionOps.impl values to force 32-bit accesses,
this way we are sure we do not access the lqspi_buf[] array
out of bound.
[*] https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Tested-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Lei Sun found while auditing the code that a CPU write would
trigger a NULL pointer dereference.
>From UG1085 datasheet [*] AXI writes in this region are ignored
and generates an AXI Slave Error (SLVERR).
Fix by implementing the write_with_attrs() handler.
Return MEMTX_ERROR when the region is accessed (this error maps
to an AXI slave error).
[*] https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf
Reported-by: Lei Sun <slei.casper@gmail.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Tested-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the next commit we will implement the write_with_attrs()
handler. To avoid using different APIs, convert the read()
handler first.
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Tested-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we converted to using feature bits in 602f6e42cf we missed out
the fact (dp && arm_dc_feature(s, ARM_FEATURE_V8)) was supported for
-cpu max configurations. This caused a regression in the GCC test
suite. Fix this by setting the appropriate bits in mvfr1.FPHP to
report ARMv8-A with FP support (but not ARMv8.2-FP16).
Fixes: https://bugs.launchpad.net/qemu/+bug/1836078
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190711103737.10017-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In hmp_change(), the variable hmp_mon is only used
by code under #ifdef CONFIG_VNC. This results in a build
error when VNC is configured out with the default of
treating warnings as errors:
monitor/hmp-cmds.c: In function ‘hmp_change’:
monitor/hmp-cmds.c:1946:17: error: unused variable ‘hmp_mon’ [-Werror=unused-variable]
1946 | MonitorHMP *hmp_mon = container_of(mon, MonitorHMP, common);
| ^~~~~~~
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Message-Id: <20190625123905.25434-1-dinechin@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
main-loop.c has a dependency on iohandler.c, and everything breaks
if that dependency is instead satisfied by stubs/iohandler.c.
Just put everything in the same file to avoid strange dependencies
on the order of files in util-obj-y.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1562952875-53702-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The memory region reference is increased when insert a range
into flatview range array, then decreased by destroy flatview.
If some flat range merged by flatview_simplify, the memory region
reference can not be decreased by destroy flatview any more.
In this case, start virtual machine by the command line:
qemu-system-x86_64
-name guest=ubuntu,debug-threads=on
-machine pc,accel=kvm,usb=off,dump-guest-core=off
-cpu host
-m 16384
-realtime mlock=off
-smp 8,sockets=2,cores=4,threads=1
-object memory-backend-file,id=ram-node0,prealloc=yes,mem-path=/dev/hugepages,share=yes,size=8589934592
-numa node,nodeid=0,cpus=0-3,memdev=ram-node0
-object memory-backend-file,id=ram-node1,prealloc=yes,mem-path=/dev/hugepages,share=yes,size=8589934592
-numa node,nodeid=1,cpus=4-7,memdev=ram-node1
-no-user-config
-nodefaults
-rtc base=utc
-no-shutdown
-boot strict=on
-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x2
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x3
-drive file=ubuntu.qcow2,format=qcow2,if=none,id=drive-virtio-disk0,cache=none,aio=native
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
-chardev pty,id=charserial0
-device isa-serial,chardev=charserial0,id=serial0
-device usb-tablet,id=input0,bus=usb.0,port=1
-vnc 0.0.0.0:0
-device VGA,id=video0,vgamem_mb=16,bus=pci.0,addr=0x5
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6
-msg timestamp=on
And run the script in guest OS:
while true
do
setpci -s 00:06.0 04.b=03
setpci -s 00:06.0 04.b=07
done
I found the reference of node0 HostMemoryBackendFile is a big one.
(gdb) p numa_info[0]->node_memdev->parent.ref
$6 = 1636278
(gdb)
Signed-off-by: King Wang<king.wang@huawei.com>
Message-Id: <20190712065241.11784-1-king.wang@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmport device is not included when CONFIG_VMPORT is disabled, hence
QEMU fails with the following error:
`Unknown device 'vmport' for bus 'ISA': unknown.`
v2: imply VMPORT (Paolo Bonzini )
Signed-off-by: Julio Montes <julio.montes@intel.com>
Message-Id: <20190712160257.18270-1-julio.montes@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Left over from c2d63650d9.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190712172743.17632-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that scsi-disk is not using scsi_sense_to_errno to separate guest-recoverable
sense codes, we can modify it to simplify iscsi's own sense handling.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running basic operations on zoned storage from the guest via
scsi-block, the following ASCs are reported for write or read commands
due to unexpected zone status or write pointer status:
21h 04h: UNALIGNED WRITE COMMAND
21h 05h: WRITE BOUNDARY VIOLATION
21h 06h: ATTEMPT TO READ INVALID DATA
55h 0Eh: INSUFFICIENT ZONE RESOURCES
Reporting these ASCs to the guest, the user applications can handle
them to manage zone/write pointer status, or help the user application
developers to understand the failure reason and fix bugs.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's not really possible to fit all sense codes into errno codes,
especially in such a way that sense codes can be properly categorized as
either guest-recoverable or host-handled. Create a new function that
checks for guest recoverable sense, then scsi_sense_buf_to_errno only
needs to be called for host handled sense codes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an error was passed down to the guest because it was recoverable,
the sense length was not copied from the SG_IO data. As a result,
the guest saw the CHECK CONDITION status but not the sense data.
Signed-off-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Turn helper_retaddr into a multi-state flag that may now also
indicate when we're performing a read on behalf of the translator.
In this case, release the mmap_lock before the longjmp back to
the main cpu loop, and thereby avoid a failing assert therein.
Fixes: https://bugs.launchpad.net/qemu/+bug/1832353
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This code block is already surrounded by #ifndef CODE_ACCESS.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These functions are not used, and are not usable in the
context of code generation, because we never have a helper
return address to pass in to them.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At present we have a potential error in that helper_retaddr contains
data for handle_cpu_signal, but we have not ensured that those stores
will be scheduled properly before the operation that may fault.
It might be that these races are not in practice observable, due to
our use of -fno-strict-aliasing, but better safe than sorry.
Adjust all of the setters of helper_retaddr.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have some potential race conditions vs our user-exec signal
handler that will be solved with this barrier.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch fixes two problems:
(1) The inputs to the EXTR insn were reversed,
(2) The input constraints use rZ, which means that we need to use
the REG0 macro in order to supply XZR for a constant 0 input.
Fixes: 464c2969d5
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On a 64-bit host, discard any replications of the 32-bit
sign bit when performing the shift and merge.
Fixes: https://bugs.launchpad.net/bugs/1834496
Tested-by: Christophe Lyon <christophe.lyon@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A bunch of fixes all over the place.
ACPI tests will now run on more systems: might
introduce new failure reports but that's for
the best, isn't it?
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdKJ/kAAoJECgfDbjSjVRp4dUH/A/eeIm24ul74NRnQHzsiL7F
duiFhPcnGhMYdTFbrV/vCAenaGR5eBl10XwVHeMEFC1ltIpwc3erdFotRp3WhOzo
P57ZpqCKr6G8MayhSSTAiNq6GJrQlQ2/eF5TSZlo6kpfP3MDYDS9W/C4Zlp52f0Y
sxvB49zXytMOJHlM0JqtiMuOfTftn+1GdEzfylJlSX0P3mKmYZG9l2++ByLoKQWd
8TNdTdGGV3go/xJ3rjmZTTLAS+rEuclVvfSXX6Y1RdGwUxmqZI/JxKmtt9eRRDdw
896p5dfYbxIGk3kOatfLfCEIBu6EcpvxwKMbbULYibITn939uNZX6rn4bI6FD9I=
=BUdh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pc, pci: fixes, cleanups, tests
A bunch of fixes all over the place.
ACPI tests will now run on more systems: might
introduce new failure reports but that's for
the best, isn't it?
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 12 Jul 2019 15:57:40 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio pmem: remove transitional names
virtio pmem: remove memdev null check
virtio pmem: fix wrong mem region condition
tests: acpi: do not skip tests when IASL is not installed
tests: acpi: do not require IASL for dumping AML blobs
virtio-balloon: fix QEMU 4.0 config size migration incompatibility
pcie: consistent names for function args
xio3130_downstream: typo fix
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove transitional & non transitional names for virtio pmem.
Only virtio 1.0 and up is supported.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190712073554.21918-4-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Coverity reports that when we're assigning vi->size we handle the
"pmem->memdev is NULL" case; but we then pass it into
object_get_canonical_path(), which unconditionally dereferences it
and will crash if it is NULL. If this pointer can be NULL then we
need to do something else here.
We are removing 'pmem->memdev' null check here as memdev will never
be null in this function.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190712073554.21918-3-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Coverity reported memory region returns zero
for non-null value. This is because of wrong
arguments to '?:' , fixing this.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190712073554.21918-2-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
tests do binary comparision so we can check tables without
IASL. Move IASL condition right before decompilation step
and skip it if IASL is not installed.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190708092410.11167-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IASL isn't needed when dumping ACPI tables from guest for
rebuild purposes. So move this part out from IASL branch.
Makes rebuild-expected-aml.sh work without IASL installed
on host.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20190708092410.11167-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio-balloon config size changed in QEMU 4.0 even for existing
machine types. Migration from QEMU 3.1 to 4.0 can fail in some
circumstances with the following error:
qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10 read: a1 device: 1 cmask: ff wmask: c0 w1cmask:0
This happens because the virtio-balloon config size affects the VIRTIO
Legacy I/O Memory PCI BAR size.
Introduce a qdev property called "qemu-4-0-config-size" and enable it
only for the QEMU 4.0 machine types. This way <4.0 machine types use
the old size, 4.0 uses the larger size, and >4.0 machine types use the
appropriate size depending on enabled virtio-balloon features.
Live migration to and from old QEMUs to QEMU 4.1 works again as long as
a versioned machine type is specified (do not use just "pc"!).
Originally-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190710141440.27635-1-stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function declarations for pci_cap_slot_get and
pci_cap_slot_write_config call the argument "slot_ctl", but the function
definitions and all the call sites drop the 'o' and call it "slt_ctl".
Let's be consistent.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Peter Xu