While the SB16 seems to work up to 48000 Hz, the "Sound Blaster Series
Hardware Programming Guide" limit the sampling range from 4000 Hz to
44100 Hz (Section 3-9, 3-10: Digitized Sound I/O Programming, tables
3-2 and 3-3).
Later, section 6-15 (DSP Commands) is more specific regarding the 41h /
42h registers (Set digitized sound output sampling rate):
Valid sampling rates range from 5000 to 45000 Hz inclusive.
There is no comment regarding error handling if the register is filled
with an out-of-range value. (See also section 3-28 "8-bit or 16-bit
Auto-initialize Transfer"). Assume limits are enforced in hardware.
This fixes triggering an assertion in audio_calloc():
#1 abort
#2 audio_bug audio/audio.c:119:9
#3 audio_calloc audio/audio.c:154:9
#4 audio_pcm_sw_alloc_resources_out audio/audio_template.h:116:15
#5 audio_pcm_sw_init_out audio/audio_template.h:175:11
#6 audio_pcm_create_voice_pair_out audio/audio_template.h:410:9
#7 AUD_open_out audio/audio_template.h:503:14
#8 continue_dma8 hw/audio/sb16.c:216:20
#9 dma_cmd8 hw/audio/sb16.c:276:5
#10 command hw/audio/sb16.c:0
#11 dsp_write hw/audio/sb16.c:949:13
#12 portio_write softmmu/ioport.c:205:13
#13 memory_region_write_accessor softmmu/memory.c:491:5
#14 access_with_adjusted_size softmmu/memory.c:552:18
#15 memory_region_dispatch_write softmmu/memory.c:0:13
#16 flatview_write_continue softmmu/physmem.c:2759:23
#17 flatview_write softmmu/physmem.c:2799:14
#18 address_space_write softmmu/physmem.c:2891:18
#19 cpu_outw softmmu/ioport.c:70:5
[*] http://www.baudline.com/solutions/full_duplex/sb16_pci/index.html
OSS-Fuzz Report: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=29174
Fixes: 85571bc741 ("audio merge (malc)")
Buglink: https://bugs.launchpad.net/bugs/1910603
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Reviewed-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210616104349.2398060-1-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Adds the pca954x muxes expected.
Tested: Booted quanta-q71l image to userspace.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20210608202522.2677850-4-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds comments to the board init to identify missing i2c devices.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20210608202522.2677850-2-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's print the new property.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-16-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's include the new property. Instead of relying on CONFIG_LINUX,
let's try to unconditionally grab the property and treat errors as
"does not exist".
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-15-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's print the property.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-14-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's include the property, which can be helpful when debugging,
for example, to spot misuse of MAP_PRIVATE which can result in some ugly
corner cases (e.g., double-memory consumption on shmem).
Use the same description we also use for describing the property.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-13-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's pass in ram flags just like we do with qemu_ram_alloc_from_file(),
to clean up and prepare for more flags.
Simplify the documentation of passed ram flags: Looking at our
documentation of RAM_SHARED and RAM_PMEM is sufficient, no need to be
repetitive.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-5-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit da6d674e50 we split the NVIC code out from the GIC.
This allowed us to specify the NVIC's default value for the num-irq
property (64) in the usual way in its property list, and we deleted
the previous hack where we updated the value in the state struct in
the instance init function. Remove a stale comment about that hack
which we forgot to delete at that time.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614161243.14211-1-peter.maydell@linaro.org
Add a comment and i2c method that describes the board layout.
Tested: firmware booted to userspace.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Brandon Kim <brandonkim@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210608193605.2611114-3-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 382c7160d1 ("hw/intc/arm_gicv3_cpuif: Fix EOIR write access
check logic") added an assert_not_reached() if the guest writes the EOIR
register while no interrupt is active.
It turns out some software does this: EDK2, in
GicV3ExitBootServicesEvent(), unconditionally write EOIR for all
interrupts that it manages. This now causes QEMU to abort when running
UEFI on a VM with GICv3. Although it is UNPREDICTABLE behavior and EDK2
does need fixing, the punishment seems a little harsh, especially since
icc_eoir_write() already tolerates writes of nonexistent interrupt
numbers. Display a guest error and tolerate spurious EOIR writes.
Fixes: 382c7160d1 ("hw/intc/arm_gicv3_cpuif: Fix EOIR write access check logic")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210604130352.1887560-1-jean-philippe@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The LUN is selected with an IDENTIFY message, and persists
until the next message out phase. Instead of passing it to
do_busid_cmd, store it in ESPState. Because do_cmd can simply
skip the message out phase if cmdfifo_cdb_offset is zero, it
can now be used for the S without ATN cases as well.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 4e78f3bf35 "esp: defer command completion interrupt on incoming data
transfers" added a version check for use with VMSTATE_*_TEST macros to allow
migration from older QEMU versions. Unfortunately the version check fails to
work in its current form since if the VMStateDescription version_id is
incremented, the test returns false and so the fields are not included in the
outgoing migration stream.
Change the version check to use >= rather == to ensure that migration works
correctly when the ESPState VMStateDescription has version_id > 5.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 4e78f3bf35 ("esp: defer command completion interrupt on incoming data transfers")
Message-Id: <20210613102614.5438-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 799d90d818 "esp: transition to message out phase after SATN and stop
command" added logic to correctly handle extended messages for DMA requests
but not for PDMA requests.
Apply the same logic in esp_do_dma() to do_dma_pdma_cb() so that extended
messages terminated with a PDMA request are accumulated correctly. This allows
the ESP device to respond correctly to the SDTR negotiation initiated by the
NetBSD ESP driver without causing errors and timeouts on boot.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210519100803.10293-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit from nearly 10 years ago is now broken due to the improvements
in esp emulation (or perhaps was never correct). It shows up as a bug
in detecting the CDROM drive under MacOS. The error is caused by the
MacOS CDROM driver sending this CDB with an "S without ATN" command and
without DMA:
0x12 0x00 0x00 0x00 0x05 0x00 (INQUIRY)
This is a valid INQUIRY command, however with this logic present the 3rd
byte (0x0) is copied over the 1st byte (0x12) which silently converts the
INQUIRY command to a TEST UNIT READY command before passing it to the
QEMU SCSI layer. Since the TEST UNIT READY command has a zero length
response the MacOS CDROM driver never receives a response and assumes
the CDROM is not present.
The logic was to ignore the IDENTIFY byte and copy the LUN over from
the CDB, which did store the LUN in bits 5-7 of the second byte in
olden times. This however is all obsolete, so just drop the code.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210519100803.10293-5-mark.cave-ayland@ilande.co.uk>
[Tweaked commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After each PDMA write transfer the MacOS CDROM driver waits until the FIFO is empty
(i.e. its contents have been written out to the SCSI bus) by polling the FIFO count
register until it reads 0. This doesn't work with the current PDMA write
implementation which waits until either the FIFO is full or the transfer is complete
before invoking the PDMA callback to process the FIFO contents.
Change the PDMA write transfer logic so that the PDMA callback is invoked after each
PDMA write to transfer the FIFO contents to the target buffer immediately, and hence
avoid getting stuck in the FIFO count register polling loop.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210519100803.10293-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The initial implementation of non-DMA transfers was based upon analysis of traces
from the MacOS toolbox ROM for handling unaligned reads but missed one key
aspect - during a non-DMA transfer from the target, the bus service interrupt
should be raised for every single byte received from the bus and not just at either
the end of the transfer or when the FIFO is full.
Adjust the non-DMA code accordingly so that esp_do_nodma() is called for every byte
received from the target. This also includes special handling for managing the change
from DATA IN to STATUS phase as this needs to occur when the final byte is read out
from the FIFO, and not at the end of the transfer of the last byte into the FIFO.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210519100803.10293-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current implementation only resumes DMA transfers when incoming data is
received from the target device, but this is also required for non-DMA transfers
with the next set of non-DMA changes.
Rather than duplicate the DMA/non-DMA dispatch logic in the initial transfer
section, update the code so that the initial transfer section can just
fallthrough to the main DMA/non-DMA dispatch logic.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210519100803.10293-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When processing a command to select a target and send a CDB, the ESP device
maintains a sequence step register so that if an error occurs the host can
determine which part of the selection/CDB submission sequence failed.
The old Linux 2.6 driver is really pedantic here: it checks the sequence step
register even if a command succeeds and complains loudly on the console if the
sequence step register doesn't match the expected bus phase and interrupt flags.
This reason this mismatch occurs is because the ESP emulation currently doesn't
update the bus phase until the next TI (Transfer Information) command and so the
cleared sequence step register is considered invalid for the stale bus phase.
Normally this isn't an issue as the host only checks the sequence step register
if an error occurs but the old Linux 2.6 driver does this in several places
causing a large stream of "esp0: STEP_ASEL for tgt 0" messages to appear on the
console during the boot process.
Fix this by not clearing the sequence step register when reading the interrupt
register and clearing the DMA status, so the guest sees a valid sequence step
and bus phase combination at the end of the command phase. No other change is
required since the sequence step register is correctly updated throughout the
selection/CDB submission sequence once one of the select commands is issued.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 1b9e48a5bd ("esp: implement non-DMA transfers in PDMA mode")
Message-Id: <20210518212511.21688-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The datasheet sequence tables confirm that when a target selection fails, only
the INTR_DC interrupt flag should be asserted.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: cf47a41e05 ("esp: latch individual bits in ESP_RINTR register")
Message-Id: <20210518212511.21688-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the device doesn't support the VPD block limits page, we emulate it even
for SCSI passthrough.
As a part of the emulation we need to add it to the 'Supported VPD Pages'
The code that does this adds it to the page, but it doesn't increase the length
of the data to be copied to the guest, thus the guest never sees the VPD block
limits page as supported.
Bump the transfer size by 1 in this case.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201217165612.942849-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: M: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210614191335.1968807-4-stefanb@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210614191335.1968807-3-stefanb@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210614191335.1968807-2-stefanb@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Checking scanout_id in virtio_gpu_do_set_scanout() is too late, for the
"resource_id == 0" case (aka disable scanout) the scanout_id is used
unchecked. Move the check into the callers to fix that.
Fixes: e64d4b6a9b ("virtio-gpu: Refactor virtio_gpu_set_scanout")
Fixes: 32db3c63ae ("virtio-gpu: Add virtio_gpu_set_scanout_blob")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/383
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20210604075029.1201478-1-kraxel@redhat.com>
The highest VBE_DISPI_INDEX_ID version supported by QEMU is
VBE_DISPI_ID5. But currently QEMU only allows writing values up to
VBE_DISPI_ID4 to the VBE_DISPI_INDEX_ID register.
As a result of this when a lower version is written to this register and
later VBE_DISPI_ID5 is written back, reads from the register will
continue to report the lower version.
Indeed SeaBIOS is doing that during VGA initialization which causes
guests to always read VBE_DISPI_ID0 instead of the correct version.
Signed-off-by: Dennis Wölfing <denniswoelfing@gmx.de>
Message-Id: <20210607115303.228659-1-denniswoelfing@gmx.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GDateTime APIs provided by GLib avoid portability pitfalls, such
as some platforms where 'struct timeval.tv_sec' field is still 'long'
instead of 'time_t'. When combined with automatic cleanup, GDateTime
often results in simpler code too.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We used to initialize backend_features during vhost_vdpa_init()
regardless whether or not it was supported by vhost. This will lead
the unsupported features like VIRTIO_F_IN_ORDER to be included and set
to the vhost-vdpa during vhost_dev_start. Because the
VIRTIO_F_IN_ORDER is not supported by vhost-vdpa so it won't be
advertised to guest which will break the datapath.
Fix this by not initializing the backend_features, so the
acked_features could be built only from guest features via
vhost_net_ack_features().
Fixes: 108a64818e ("vhost-vdpa: introduce vhost-vdpa backend")
Cc: qemu-stable@nongnu.org
Cc: Gautam Dawar <gdawar@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch implements the vq notification mapping support for
vhost-vDPA. This is simply done by using mmap()/munmap() for the
vhost-vDPA fd during device start/stop. For the device without
notification mapping support, we fall back to eventfd based
notification gracefully.
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
vDPA is not tie to any specific hardware, for safety and simplicity,
vhost-vDPA doesn't allow MMIO area to be mapped via IOTLB. Only the
doorbell could be mapped via mmap(). So this patch exclude skip the
ram device from the IOTLB mapping.
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
At present the Microchip Icicle Kit machine only supports using
'-bios' to load the HSS, and does not support '-kernel' for direct
kernel booting just like other RISC-V machines do. One has to use
U-Boot which is chain-loaded by HSS, to load a kernel for testing.
This is not so convenient.
Adding '-kernel' support together with the existing '-bios', we
follow the following table to select which payload we execute:
-bios | -kernel | payload
------+------------+--------
N | N | HSS
Y | don't care | HSS
N | Y | kernel
This ensures backwards compatibility with how we used to expose
'-bios' to users. When '-kernel' is used for direct boot, '-dtb'
must be present to provide a valid device tree for the board,
as we don't generate device tree.
When direct kernel boot is used, the OpenSBI fw_dynamic BIOS image
is used to boot a payload like U-Boot or OS kernel directly.
Documentation is updated to describe the direct kernel boot. Note
as of today there is still no PolarFire SoC support in the upstream
Linux kernel hence the document does not include instructions for
that. It will be updated in the future.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-8-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The OpenSBI BIOS image names are used by many RISC-V machines.
Let's define macros for them.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-7-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The official DT bindings of PLIC uses "sifive,plic-1.0.0" as the
compatible string in the upstream Linux kernel. "riscv,plic0" is
now legacy and has to be kept for backward compatibility of legacy
systems.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-4-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Linux kernel commit a2770b57d083 ("dt-bindings: timer: Add CLINT bindings")
adds the official DT bindings for CLINT, which uses "sifive,clint0"
as the compatible string. "riscv,clint0" is now legacy and has to
be kept for backward compatibility of legacy systems.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit 78da6a1bca ("device_tree: add qemu_fdt_setprop_string_array helper"),
we can use the new helper to set the compatible strings for the
SiFive test device node.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit 78da6a1bca ("device_tree: add qemu_fdt_setprop_string_array helper"),
we can use the new helper to set the clock name for the ethernet
controller node.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The symbol address_space_memory are already declared in
include/exec/address-spaces.h. So let's add this header file
and remove the redundant declaration in include/hw/virtio/vhost-vdpa.h.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210517123246.999-1-xieyongji@bytedance.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The "nubus-macfb" currently shows up as uncategorized device in
the output of "-device help". Put it into the display category
to fix this ugliness.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210531073255.46286-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Headers should be included from the 'include/' directory,
not from the root directory.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210516205034.694788-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Peter Maydell