It was from the time when none of the global functions had a qcow2_
prefix.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We make sure that the size is aligned to sector length to prevent any
round ups. Otherwise we could end up reading/writing data outside the
area specified by user. This is only needed when user supplies the size
option to avoid any surprises. It is not necessary when only offset is
set.
More over, the check made it difficult to use the offset option without
size option. The check puts unneeded restriction on the offset which had
to be aligned too. Because bdrv_getlength() returns aligned value having
unaligned offset would make the check fail.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When only offset is specified but no size and the offset is greater than
the real size of the containing device an overflow occurs when parsing
the options. This overflow is harmless because we do check for this
exact situation little bit later, but it leads to an error message with
weird values. It is better to do the check is sooner and prevent the
overflow.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch drops the unused parameter "BDRVSSHState" being passed into
the ssh_config() function and does code cleanup. The unused parameter
was introduced by the commit c322712.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch frees the leaked visitor in nbd_refresh_filename() and uses
visit_free() to fix it. The leak was introduced by the commit 491d6c7.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 3ff2f67a changed bdrv_co_flush() so that no flush is issues if
the image hasn't been dirtied since the last flush. This is not quite
correct: The condition should be that the image hasn't been dirtied
since the last _successful_ flush. This patch changes the logic
accordingly.
Without this fix, subsequent bdrv_co_flush() calls would return success
without actually doing anything even though the image is still dirty.
The difference is visible in some blkdebug test cases where error
messages incorrectly disappeared after commit 3ff2f67a.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1478300595-10090-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* NBD write zeroes support (Eric)
* Memory backend fixes (Haozhong)
* Atomics fix (Alex)
* New AVX512 features (Luwei)
* "make check" logging fix (Paolo)
* Chardev refactoring fallout (Paolo)
* Small checkpatch improvements (Paolo, Jeff)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQExBAABCAAbBQJYGaRPFBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
XKgH/RgNtosBTqJsmphkS7wACFAFOf7Uq46ajoKfB66Pt1J/++pFQg4TApPYkb7j
KlKeKmXa7hb6+Jg8325H4zGkGno4kn2dE+OnznaB1xPKwiZVAMQVzQsagsEVqpno
k/5PBVRptIiuHQKyU29Go0CxbWJBTH0O14S7rDK4YDF0YMnuT280HQOI3jdu1igV
G/Q+CMgfk+yXf6GWHE8Z9sNq7n0ha8qgruA/X3NC7+pAvEsUcAP065zwLp9weYuK
W1MU68L7Ub4tRo0SVf1HFkDUNdMv4T4hg+wpGe1GwthJWexHu9x0YAQBy60ykJb6
NtHwjLwCUWtm7AiZD/btsOJPmjk=
=+Dt/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* NBD bugfix (Changlong)
* NBD write zeroes support (Eric)
* Memory backend fixes (Haozhong)
* Atomics fix (Alex)
* New AVX512 features (Luwei)
* "make check" logging fix (Paolo)
* Chardev refactoring fallout (Paolo)
* Small checkpatch improvements (Paolo, Jeff)
# gpg: Signature made Wed 02 Nov 2016 08:31:11 AM GMT
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (30 commits)
main-loop: Suppress I/O thread warning under qtest
docs/rcu.txt: Fix minor typo
vl: exit qemu on guest panic if -no-shutdown is not set
checkpatch: allow spaces before parenthesis for 'coroutine_fn'
x86: add AVX512_4VNNIW and AVX512_4FMAPS features
slirp: fix CharDriver breakage
qemu-char: do not forward events through the mux until QEMU has started
nbd: Implement NBD_CMD_WRITE_ZEROES on client
nbd: Implement NBD_CMD_WRITE_ZEROES on server
nbd: Improve server handling of shutdown requests
nbd: Refactor conversion to errno to silence checkpatch
nbd: Support shorter handshake
nbd: Less allocation during NBD_OPT_LIST
nbd: Let client skip portions of server reply
nbd: Let server know when client gives up negotiation
nbd: Share common option-sending code in client
nbd: Send message along with server NBD_REP_ERR errors
nbd: Share common reply-sending code in server
nbd: Rename struct nbd_request and nbd_reply
nbd: Rename NbdClientSession to NBDClientSession
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Upstream NBD protocol recently added the ability to efficiently
write zeroes without having to send the zeroes over the wire,
along with a flag to control whether the client wants a hole.
The generic block code takes care of falling back to the obvious
write of lots of zeroes if we return -ENOTSUP because the server
does not have WRITE_ZEROES.
Ideally, since NBD_CMD_WRITE_ZEROES does not involve any data
over the wire, we want to support transactions that are much
larger than the normal 32M limit imposed on NBD_CMD_WRITE. But
the server may still have a limit smaller than UINT_MAX, so
until experimental NBD protocol additions for advertising various
command sizes is finalized (see [1], [2]), for now we just stick to
the same limits as normal writes.
[1] https://github.com/yoe/nbd/blob/extension-info/doc/proto.md
[2] https://sourceforge.net/p/nbd/mailman/message/35081223/
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-17-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Our coding convention prefers CamelCase names, and we already
have other existing structs with NBDFoo naming. Let's be
consistent, before later patches add even more structs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-6-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's better to use consistent capitalization of the namespace
used for NBD functions; we have more instances of NBD* than
Nbd*.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-5-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current upstream NBD documents that requests have a 16-bit flags,
followed by a 16-bit type integer; although older versions mentioned
only a 32-bit field with masking to find flags. Since the protocol
is in network order (big-endian over the wire), the ABI is unchanged;
but dealing with the flags as a separate field rather than masking
will make it easier to add support for upcoming NBD extensions that
increase the number of both flags and commands.
Improve some comments in nbd.h based on the current upstream
NBD protocol (https://github.com/yoe/nbd/blob/master/doc/proto.md),
and touch some nearby code to keep checkpatch.pl happy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-3-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NBD is using the CoMutex in a way that wasn't anticipated. For example, if there are
N(N=26, MAX_NBD_REQUESTS=16) nbd write requests, so we will invoke nbd_client_co_pwritev
N times.
----------------------------------------------------------------------------------------
time request Actions
1 1 in_flight=1, Coroutine=C1
2 2 in_flight=2, Coroutine=C2
...
15 15 in_flight=15, Coroutine=C15
16 16 in_flight=16, Coroutine=C16, free_sema->holder=C16, mutex->locked=true
17 17 in_flight=16, Coroutine=C17, queue C17 into free_sema->queue
18 18 in_flight=16, Coroutine=C18, queue C18 into free_sema->queue
...
26 N in_flight=16, Coroutine=C26, queue C26 into free_sema->queue
----------------------------------------------------------------------------------------
Once nbd client recieves request No.16' reply, we will re-enter C16. It's ok, because
it's equal to 'free_sema->holder'.
----------------------------------------------------------------------------------------
time request Actions
27 16 in_flight=15, Coroutine=C16, free_sema->holder=C16, mutex->locked=false
----------------------------------------------------------------------------------------
Then nbd_coroutine_end invokes qemu_co_mutex_unlock what will pop coroutines from
free_sema->queue's head and enter C17. More free_sema->holder is C17 now.
----------------------------------------------------------------------------------------
time request Actions
28 17 in_flight=16, Coroutine=C17, free_sema->holder=C17, mutex->locked=true
----------------------------------------------------------------------------------------
In above scenario, we only recieves request No.16' reply. As time goes by, nbd client will
almostly recieves replies from requests 1 to 15 rather than request 17 who owns C17. In this
case, we will encounter assert "mutex->holder == self" failed since Kevin's commit 0e438cdc
"coroutine: Let CoMutex remember who holds it". For example, if nbd client recieves request
No.15' reply, qemu will stop unexpectedly:
----------------------------------------------------------------------------------------
time request Actions
29 15(most case) in_flight=15, Coroutine=C15, free_sema->holder=C17, mutex->locked=false
----------------------------------------------------------------------------------------
Per Paolo's suggestion "The simplest fix is to change it to CoQueue, which is like a condition
variable", this patch replaces CoMutex with CoQueue.
Cc: Wen Congyang <wency@cn.fujitsu.com>
Reported-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Message-Id: <1476267508-19499-1-git-send-email-xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To make it a little more obvious which functions are intended to be
public interface and which are intended to be for use only by jobs
themselves, split the interface into "public" and "private" files.
Convert blockjobs (e.g. block/backup) to using the private interface.
Leave blockdev and others on the public interface.
There are remaining uses of private state by qemu-img, and several
cases in blockdev.c and block/io.c where we grab job->blk for the
purposes of acquiring an AIOContext.
These will be corrected in future patches.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-7-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
There's no reason to leave this to blockdev; we can do it in blockjobs
directly and get rid of an extra callback for most users.
All non-internal events, even those created outside of QMP, will
consistently emit events.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-5-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Bubble up the internal interface to commit and backup jobs, then switch
replication tasks over to using this methodology.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-4-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Add the ability to create jobs without an ID.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-3-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
After introduction of qapi schema in gluster block driver code, the port
type is now string as per InetSocketAddress
{ 'struct': 'InetSocketAddress',
'data': {
'host': 'str',
'port': 'str',
'*to': 'uint16',
'*ipv4': 'bool',
'*ipv6': 'bool' } }
but the current code still treats it as QEMU_OPT_NUMBER, hence fixing port
to accept QEMU_OPT_STRING.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
using atoi() for converting string to int may be error prone in case if
string supplied in the argument is not a fold of numerical number,
This is not a bug because in the existing code,
static QemuOptsList runtime_tcp_opts = {
.name = "gluster_tcp",
.head = QTAILQ_HEAD_INITIALIZER(runtime_tcp_opts.head),
.desc = {
...
{
.name = GLUSTER_OPT_PORT,
.type = QEMU_OPT_NUMBER,
.help = "port number ...",
},
...
};
port type is QEMU_OPT_NUMBER, before we actually reaches atoi() port is already
defended by parse_option_number()
However It is a good practice to use function like parse_uint_full()
over atoi() to keep port self defended
Note: As now the port string to int conversion has its defence code set,
and also we understand that port argument is actually a string type,
in the follow up patch let's move port type from QEMU_OPT_NUMBER to
QEMU_OPT_STRING
[Jeff Cody: removed spurious parenthesis]
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
We already specified BDRV_O_UNMAP when opening images in 'qemu-img
commit', but didn't turn on the "unmap" in the active commit job. This
patch fixes that so that zeroed clusters in top image can be discarded
which is desired in the virt-sparsify use case, where a temporary
overlay is created and fstrim'ed before commiting back, to free space in
the original image.
This also enables it for block-commit.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1474974892-5031-1-git-send-email-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Currently, for every drive accessed via gfapi we create a new glfs
instance (call glfs_new() followed by glfs_init()) which could consume
memory in few 100 MB's, from the table below it looks like for each
instance ~300 MB VSZ was consumed
Before:
-------
Disks VSZ RSS
1 1098728 187756
2 1430808 198656
3 1764932 199704
4 2084728 202684
This patch maintains a list of pre-opened glfs objects. On adding
a new drive belonging to the same gluster volume, we just reuse the
existing glfs object by updating its refcount.
With this approch we shrink up the unwanted memory consumption and
glfs_new/glfs_init calls for accessing a disk (file) if belongs to
same volume.
From below table notice that the memory usage after adding a disk
(which will reuse the existing glfs object hence) is in negligible
compared to before.
After:
------
Disks VSZ RSS
1 1101964 185768
2 1109604 194920
3 1114012 196036
4 1114496 199868
Disks: number of -drive
VSZ: virtual memory size of the process in KiB
RSS: resident set size, the non-swapped physical memory (in kiloBytes)
VSZ and RSS are analyzed using 'ps aux' utility.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477581890-4811-1-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Add checks to see if the system compiling QEMU has support for
SEEK_HOLE/SEEK_DATA. If the system does not, we will flag that seek
data is unsupported in gluster.
Note: this is not a check on whether the gluster server itself supports
SEEK_DATA (that is already done during runtime), but rather if the
compilation environment supports SEEK_DATA.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 00370bce5c98140d6c56ad5145635ec6551265cc.1475876377.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Make it a bit clearer and more readable.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1476519973-6436-1-git-send-email-lixiubo@cmss.chinamobile.com
CC: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Make NFS block driver use various fine grained runtime_opts.
Set .bdrv_parse_filename() to nfs_parse_filename() and introduce two
new functions nfs_parse_filename() and nfs_parse_uri() to help parsing
the URI.
Add a new option "server" which then accepts a new struct NFSServer.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
[ kwolf: Fixed client->path ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Added two new options 'offset' and 'size'. This makes it possible to use
only part of the file as a device. This can be used e.g. to limit the
access only to single partition in a disk image or use a disk inside a
tar archive (like OVA).
When 'size' is specified we do our best to honour it.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This makes sure that the image we are streaming into is open in
read-write mode during the operation.
Operation blockers are also set in all intermediate nodes, since they
will be removed from the chain afterwards.
Finally, this also unblocks the stream operation in backing files.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When block-commit is launched without the top parameter, it uses
internally a mirror block job. In that case all intermediate nodes
between the active and base nodes must be blocked as well.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After a successful block-commit operation all nodes between top and
base are removed from the backing chain, and top's overlay needs to
be updated to point to base. Because of that we should prevent other
block jobs from messing with them.
This patch blocks all operations in these nodes in commit_start().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use block_job_add_bdrv() instead of blocking all operations in
backup_start() and unblocking them in backup_run().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use block_job_add_bdrv() instead of blocking all operations in
mirror_start_job() and unblocking them in mirror_exit().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_drain_all() doesn't allow the caller to do anything after all
pending requests have been completed but before block jobs are
resumed.
This patch splits bdrv_drain_all() into _begin() and _end() for that
purpose. It also adds aio_{disable,enable}_external() calls to disable
external clients in the meantime.
An important restriction of this split is that no new block jobs or
BlockDriverStates can be created between the bdrv_drain_all_begin()
and bdrv_drain_all_end() calls. This is not a concern now because
we'll only be using this in bdrv_reopen_multiple(), but it must be
dealt with if we ever have other uses cases in the future.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop the use of legacy options in favour of the InetSocketAddress
options.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add InetSocketAddress compatibility to SSH driver.
Add a new option "server" to the SSH block driver which then accepts
a InetSocketAddress.
"host" and "port" are supported as legacy options and are mapped to
their InetSocketAddress representation.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have 5 options plus ("server") option which is added in the next
patch that conflict with specifying a SSH filename. We need to iterate
over all the options to check whether its key has an "server." prefix.
This iteration will help us adding the new option "server" easily.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Version: GnuPG v2
iQEcBAABCAAGBQJYE2ULAAoJEMo1YkxqkXHGvvAH/iDPIAiwBXbndL3KhQTneSHn
ctd4I3VK1/VVTIBRJIetqETiWiAm/WoRhI9kBc/NrQxBFx3ko+fpSYFS2t6lJYnV
EX0vjTKjFhr05tOTQDH/SQtHdU5x/x2M8SsxqrCcTyLm5VDfdPeBlMBfSNMj/L2K
bwinANVEwr6LOM0h8weQ0SvOCa5MLII2p5ufGwKQmhUY5tgZvFlyPa+quDVisKoE
7CpLwWHmUQSNxUXSaru90osUJyk90wCcYxPpJN3YO1MHvpH4kG8DpZ8bnFqLAoNw
zkRdqIrlfntD+mKDqRU1y0GXxu9I4VK1UDcQyRFoSdMi2oHR+L018sQEjCYTAXo=
=n+CF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/for-upstream' into staging
# gpg: Signature made Fri 28 Oct 2016 15:47:39 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/for-upstream:
aio: convert from RFifoLock to QemuRecMutex
qemu-thread: introduce QemuRecMutex
iothread: release AioContext around aio_poll
block: only call aio_poll on the current thread's AioContext
qemu-img: call aio_context_acquire/release around block job
qemu-io: acquire AioContext
block: prepare bdrv_reopen_multiple to release AioContext
replication: pass BlockDriverState to reopen_backing_file
iothread: detach all block devices before stopping them
aio: introduce qemu_get_current_aio_context
sheepdog: use BDRV_POLL_WHILE
nfs: use BDRV_POLL_WHILE
nfs: move nfs_set_events out of the while loops
block: introduce BDRV_POLL_WHILE
qed: Implement .bdrv_drain
block: change drain to look only at one child at a time
block: add BDS field to count in-flight requests
mirror: use bdrv_drained_begin/bdrv_drained_end
blockjob: introduce .drain callback for jobs
replication: interrupt failover if the main device is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=gsxL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2016-10-27-1' into staging
Merge qio 2016/10/27 v1
# gpg: Signature made Thu 27 Oct 2016 13:54:03 BST
# gpg: using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/pull-qio-2016-10-27-1:
main: set names for main loop sources created
vnc: set name for all I/O channels created
migration: set name for all I/O channels created
char: set name for all I/O channels created
nbd: set name for all I/O channels created
io: add ability to set a name for IO channels
io: Add a QIOChannelSocket cleanup test
io: set LISTEN flag explicitly for listen sockets
io: Introduce a qio_channel_set_feature() helper
io: Use qio_channel_has_feature() where applicable
io: Fix double shift usages on QIOChannel features
Conflicts:
qemu-char.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
aio_poll is not thread safe; for example bdrv_drain can hang if
the last in-flight I/O operation is completed in the I/O thread after
the main thread has checked bs->in_flight.
The bug remains latent as long as all of it is called within
aio_context_acquire/aio_context_release, but this will change soon.
To fix this, if bdrv_drain is called from outside the I/O thread,
signal the main AioContext through a dummy bottom half. The event
loop then only runs in the I/O thread.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-18-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
After the next patch bdrv_drain_all will have to be called without holding any
AioContext. Prepare to do this by adding an AioContext argument to
bdrv_reopen_multiple.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-15-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will be needed in the next patch to retrieve the AioContext.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-14-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is important when the sheepdog driver works on a BlockDriverState
that is attached to an I/O thread other than the main thread.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-11-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will make it possible to use nfs_get_allocated_file_size on
a file that is not in the main AioContext.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-10-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
nfs_set_events only needs to be called once before entering the
while loop; afterwards, nfs_process_read and nfs_process_write
take care of it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-9-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
We want the BDS event loop to run exclusively in the iothread that
owns the BDS's AioContext. This macro will provide the synchronization
between the two event loops; for now it just wraps the common idiom
of a while loop around aio_poll.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-8-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The "need_check_timer" is used to clear the "NEED_CHECK" flag in the
image header after a grace period once metadata update has finished. To
comply with the bdrv_drain semantics, we should make sure it remains
deleted once .bdrv_drain is called.
The change to qed_need_check_timer_cb is needed because bdrv_qed_drain
is called after s->bs has been drained, and should not operate on it;
instead it should operate on the BdrvChild-ren exclusively. Doing so
is easy because QED does not have a bdrv_co_flush_to_os callback, hence
all that is needed to flush it is to ensure writes have reached the disk.
Based on commit df9a681dc9 (which however included some unrelated
hunks, possibly due to a merge failure or an overlooked squash).
The patch was reverted because at the time bdrv_qed_drain could call
qed_plug_allocating_write_reqs while an allocating write was queued.
This however is not possible anymore after the previous patch;
.bdrv_drain is only called after all writes have completed at the
QED level, and its purpose is to trigger metadata writes in bs->file.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-7-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
bdrv_requests_pending is checking children to also wait until internal
requests (such as metadata writes) have completed. However, checking
children is in general overkill. Children requests can be of two kinds:
- requests caused by an operation on bs, e.g. a bdrv_aio_write to bs
causing a write to bs->file->bs. In this case, the parent's in_flight
count will always be incremented by at least one for every request in
the child.
- asynchronous metadata writes or flushes. Such writes can be started
even if bs's in_flight count is zero, but not after the .bdrv_drain
callback has been invoked.
This patch therefore changes bdrv_drain to finish I/O in the parent
(after which the parent's in_flight will be locked to zero), call
bdrv_drain (after which the parent will not generate I/O on the child
anymore), and then wait for internal I/O in the children to complete.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-6-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Unlike tracked_requests, this field also counts throttled requests,
and remains non-zero if an AIO operation needs a BH to be "really"
completed.
With this change, it is no longer necessary to have a dummy
BdrvTrackedRequest for requests that are never serialising, and
it is no longer necessary to poll the AioContext once after
bdrv_requests_pending(bs) returns false.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-5-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Ensure that there are no changes between the last check to
bdrv_get_dirty_count and the switch to the target.
There is already a bdrv_drained_end call, we only need to ensure
that bdrv_drained_begin is not called twice.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-4-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is required to decouple block jobs from running in an
AioContext. With multiqueue block devices, a BlockDriverState
does not really belong to a single AioContext.
The solution is to first wait until all I/O operations are
complete; then loop in the main thread for the block job to
complete entirely.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-3-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Without this change, there is a race condition in tests/test-replication.
Depending on how fast the failover job (active commit) runs, there is a
chance of two bad things happening:
1) replication_done can be called after the secondary has been closed
and hence when the BDRVReplicationState is not valid anymore.
2) two copies of the active disk are present during the
/replication/secondary/stop test (that test runs immediately after
/replication/secondary/start, which tests failover). This causes the
corruption detector to fire.
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-2-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Drop the use of legacy options in favor of the SocketAddress
representation, even for internal use (i.e. for storing the result of
the filename parsing).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new option "server" to the NBD block driver which accepts a
SocketAddress.
"path", "host" and "port" are still supported as legacy options and are
mapped to their corresponding SocketAddress representation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia