Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: split from merged patch]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
By itself this doesn't add much to our coverage. However later patches
will extend this image to include more bleeding edge libraries which
are not yet widely available in distros.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: extend commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We'll also want to support some older Debian combinations for
architectures that didn't make the Debian 9 cut.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: extend commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When trying to debug problems with tests it is natural to set
DEBUG=1 when starting the docker environment. Unfortunately
this has a side-effect of enabling an eth0 network interface
in the container, which changes the operating environment of
the test suite. IOW tests with fail may suddenly start
working again if DEBUG=1 is set, due to changed network setup.
Add a separate NETWORK variable to allow enablement of
networking separately from DEBUG=1. This can be used in two
ways. To enable the default docker network backend
make docker-test-build@fedora NETWORK=1
while to enable a specific network backend, eg join the network
associated with the container 'wibble':
make docker-test-build@fedora NETWORK=container:wibble
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170713144352.2212-1-berrange@redhat.com>
[Drop the superfluous second $(subst ...). - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We've used --add-current-user to create a user in the image, use it to
run tests, because root has too much priviledge, and can surprise test
cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170505032340.26467-2-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This provides a basic Debian install with access to the emdebian cross
compilers. The debian-armhf-cross and debian-arm64-cross targets build
on the basic Debian image to allow cross compiling to those targets.
A new environment variable (QEMU_CONFIGURE_OPTS) is set as part of the
docker container and passed to the build to specify the
--cross-prefix. The user still calls the build in the usual way, for
example:
make docker-test-build@debian-arm64-cross \
TARGET_LIST="aarch64-softmmu,aarch64-linux-user"
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170220105139.21581-3-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Currently all docker builds are done by exporting a tarball to the
docker container and running the build as the containers root user.
Other use cases are possible however and it is possible to map a part
of users file-system to the container. This is useful for example for
doing cross-builds of arbitrary source trees. For this to work
smoothly the container needs to have a user created that maps cleanly
to the host system.
This adds a -u option to the docker script so that:
DEB_ARCH=armhf DEB_TYPE=stable ./tests/docker/docker.py build \
-u --include-executable=arm-linux-user/qemu-arm \
debian:armhf ./tests/docker/dockerfiles/debian-bootstrap.docker
Will build a container that can then be run like:
docker run --rm -it -v /home/alex/lsrc/qemu/risu.git/:/src \
--user=alex:alex -w /src/ debian:armhf \
sh -c "make clean && ./configure -s && make"
All docker containers built will add the current user unless
explicitly disabled by specifying NOUSER when invoking the Makefile:
make docker-image-debian-armhf-cross NOUSER=1
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170220105139.21581-2-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
This re-factors the docker makefile to include a docker-run target which
can be controlled entirely from environment variables specified on the
make command line. This allows us to run against any given docker image
we may have in our repository, for example:
make docker-run TEST="test-quick" IMAGE="debian:arm64" \
EXECUTABLE=./aarch64-linux-user/qemu-aarch64
The existing docker-foo@bar targets still work but the inline
verification has been dropped because we already don't hit that due to
other pattern rules in rules.mak.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20161011161625.9070-5-alex.bennee@linaro.org>
Message-Id: <20161011161625.9070-6-alex.bennee@linaro.org>
[Squash in the verification removal patch. - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
The quiet-command make rule currently takes two arguments:
the command and arguments to run, and a string to print if
the V flag is not set (ie we are not being verbose).
By convention, the string printed is of the form
" NAME some args". Unfortunately to get nicely lined up
output all the strings have to agree about what column the
arguments should start in, which means that if we add a
new quiet-command usage which wants a slightly longer CMD
name then we either put up with misalignment or change
every quiet-command string.
Split the quiet-mode string into two, the "NAME" and
the "same args" part, and use printf(1) to format the
string automatically. This means we only need to change
one place if we want to support a longer maximum name.
In particular, we can now print 7-character names lined
up properly (they are needed for the OSX "SETTOOL" invocation).
Change all the uses of quiet-command to the new syntax.
(Any which are missed or inadvertently reintroduced
via later merges will result in slightly misformatted
quiet output rather than disaster.)
A few places in the pc-bios/ makefiles are updated to use
"BUILD", "SIGN" and "STRIP" rather than "Building",
"Signing" and "Stripping" for consistency and to keep them
below 7 characters. Module .mo links now print "LD" rather
than the nonstandard "LD -r".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
Add a make variable SHOW_ENV. When it's set to non empty, print the
package information and environment variables.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1474429768-25027-8-git-send-email-famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Building the debian-debootstrap image will usually fail if EXECUTABLE
isn't set (when using the Makefile). Warn the user in this case so
they know why it's failing.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-Id: <1473192351-601-6-git-send-email-silbe@linux.vnet.ibm.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The 'realpath' executable is shipped in a separate package that isn't
installed by default on some distros.
We already use 'readlink -e' (provided by GNU coreutils) in some other
part of the code, so let's settle for that instead.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-Id: <1473192351-601-3-git-send-email-silbe@linux.vnet.ibm.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
By not using "--format" with docker images command.
The option is not available on RHEL 7 docker command. Use an awk
matching command instead.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1470202928-3392-1-git-send-email-famz@redhat.com>
To build a docker image with which needs qemu linux-user emulation we
need to pass --include-executable to the build script. Using the same
mechanism as for other container controls we enable the option is
EXECUTABLE is set on the make command line e.g:
make docker-image-debian-bootstrap V=1 J=9 DEB_ARCH=armhf \
DEB_TYPE=stable EXECUTABLE=./arm-linux-user/qemu-arm
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1468934445-32183-11-git-send-email-famz@redhat.com
Signed-off-by: Fam Zheng <famz@redhat.com>
Image building targets are dependencies of test running targets, so when
a docker image doesn't exist, it means it's skipped (due to dependency
checks in pre script). Therefore, skip the test too.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1468934445-32183-10-git-send-email-famz@redhat.com
It is very easy to figure out current directory and bash option from the
execution, so do less in the Makefile invocation command line, and
figure both options in the script.
This makes the next patch easier.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1468934445-32183-7-git-send-email-famz@redhat.com
make-archive-maybe expects an archive path relative
to $1, but receives a path relative to the current directory. Redirect
the output outside the subshell to bypass the "cd $1".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1465224417-141321-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Fam Zheng <famz@redhat.com>
The eval trick for defining DOCKER_SRC_COPY doesn't do anything
useful, as DOCKER_SRC_COPY is immediately expanded just after it
is defined, and CUR_TIME is already defined using ":=". Simply
define it using ":=" so it is evaluated only once.
The eval trick was also triggering an weird error on Travis builds:
qemu/tests/docker/Makefile.include:34: *** unterminated variable reference. Stop.
The issue is not easily reproducible (maybe it's a bug in some
versions of Make), but it is avoided if removing the eval trick.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Whatever passed in this variable will be appended to all
configure commands.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1464755128-32490-15-git-send-email-famz@redhat.com
This adds a group of make targets to run docker tests, all are available
in source tree without running ./configure.
The usage is shown with "make docker".
Besides the fixed ones, dynamic targets for building each image and
running each test in each image are generated automatically by make,
scanning $(SRC_PATH)/tests/docker/ files with specific patterns.
Alternative to manually list particular targets (docker-TEST@IMAGE)
set, you can control which tests/images to run by filtering variables,
TESTS= and IMAGES=, which are expressed in Makefile pattern syntax,
"foo% %bar ...". For example:
$ make docker-test IMAGES="ubuntu fedora"
Unfortunately, it's impossible to propagate "-j $JOBS" into make in
containers, however since each combination is made a first class target
in the top Makefile, "make -j$N docker-test" still parallels the tests
coarsely.
Still, $J is made a magic variable to let all make invocations in
containers to use -j$J.
Instead of providing a live version of the source tree to the docker
container we snapshot it with git-archive. This ensures the tree is in a
pristine state for whatever operations the container is going to run on
them.
Uncommitted changes known to files known by the git index will be
included in the snapshot if there are any.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1464755128-32490-5-git-send-email-famz@redhat.com
Alex Bennée