Add tests that validate it is possible to connect to an NBD server
running TLS mode. Also test mis-matched TLS vs non-TLS connections
correctly fail.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-7-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to iotests shell cleanups, use ss instead of socat for
port probing, sanitize port number in expected output]
Signed-off-by: Eric Blake <eblake@redhat.com>
If you have a capable file system (tmpfs is good, ext4 not so much;
run ./check with TEST_DIR pointing to a good location so as not
to skip the test), it's actually possible to create a qcow2 file
that expands to a sparse 512T image with just over 38M of content.
The test is not the world's fastest (qemu crawling through 256M
bits of refcount table to find the next cluster to allocate takes
several seconds, as does qemu-img check reporting millions of
leaked clusters); but it DOES catch the problem that the previous
patch just fixed where writing a compressed cluster to a full
image ended up overwriting the wrong cluster.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a small test that will check for the ability to parse
both legacy and modern options for rbd.
The way the test is set up is for failure to occur, but without
having to wait to timeout on a non-existent rbd server. The error
messages in the success path show that the arguments were parsed.
The failure behavior prior to the patch series that has this test, is
qemu-img complaining about mandatory options (e.g. 'pool') not being
provided.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: f830580e339b974a83ed4870d11adcdc17f49a47.1536704901.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Make sure that query-blockstats returns information for every
BlockBackend that is named or attached to a device model (or both).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test that we're rejecting what we ought to for file,
host_driver and host_cdrom drivers. Test that we're
seeing the deprecated message for block and chardevs
on the file driver.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test verifies that VMDK backing file reads fail when the
backing file has a non-matching CID. This includes non-VMDK backing
files.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180702210721.4847-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Although this test is NOT a full test of image fleecing (as it
intentionally uses just a single block device directly exported
over NBD, rather than trying to set up a blockdev-backup job with
multiple BDS involved), it DOES prove that qemu as a server is
able to properly expose a dirty bitmap over NBD.
When coupled with image fleecing, it is then possible for a
third-party client to do an incremental backup by using
qemu-img map with the x-dirty-bitmap option to learn which parts
of the file are dirty (perhaps confusingly, they are the portions
mapped as "data":false - which is part of the reason this is
still in the x- experimental namespace), along with another
normal client (perhaps 'qemu-nbd -c' to expose the server over
/dev/nbd0 and then just use normal I/O on that block device) to
read the dirty sections.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180702191458.28741-3-eblake@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20180702194630.9360-3-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Although qemu-img creates aligned files (by rounding up), it
must also gracefully handle files that are not sector-aligned.
Test that the bug fixed in the previous patch does not recur.
It's a bit annoying that we can see the (implicit) hole past
the end of the file on to the next sector boundary, so if we
ever reach the point where we report a byte-accurate size rather
than our current behavior of always rounding up, this test will
probably need a slight modification.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test for an I/O error during snapshot deletion, and maybe
more importantly, for how to repair the resulting image. If the
snapshot has been deleted before the error occurs, the only negative
result will be leaked clusters -- and those should be repairable with
qemu-img check -r leaks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509200059.31125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
grep for "migrate" turns up a few test cases which use migration, but
haven't been in the "migration" group so far. Add them to the group.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
COR across nodes (that is, you have some filter node between the
actually COR target and the node that performs the COR) cannot reliably
work together with the permission system when there is no explicit COR
node that can request the WRITE_UNCHANGED permission for its child.
This is because COR (currently) sneaks its requests by the usual
permission checks, so it can work without a WRITE* permission; but if
there is a filter node in between, that will re-issue the request, which
then passes through the usual check -- and if nobody has requested a
WRITE_UNCHANGED permission, that check will fail.
There is no real direct fix apart from hoping that there is someone who
has requested that permission; in case of just the qemu-io HMP command
(and no guest device), however, that is not the case. The real real fix
is to implement the copy-on-read flag through an implicitly added COR
node. Such a node can request the necessary permissions as shown in
this test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180421132929.21610-10-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
iotest 197 tests copy-on-read using the (now old) copy-on-read flag.
Copy it to 215 and modify it to use the COR filter driver instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180421132929.21610-9-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit abd3622cc0 added a case to 122
regarding how the qcow2 driver handles an incorrect compressed data
length value. This does not really fit into 122, as that file is
supposed to contain qemu-img convert test cases, which this case is not.
So this patch splits it off into its own file; maybe we will even get
more qcow2-only compression tests in the future.
Also, that test case does not work with refcount_bits=1, so mark that
option as unsupported.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180406164108.26118-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We already have an extensive mirror test (041) which does cover
cancelling a mirror job, especially after it has emitted the READY
event. However, it does not check what exact events are emitted after
block-job-cancel is executed. More importantly, it does not use
throttling to ensure that it covers the case of block-job-cancel before
READY.
It would be possible to add this case to 041, but considering it is
already our largest test file, it makes sense to create a new file for
these cases.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180501220509.14152-3-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Testing on ext4, most 'quick' qcow2 tests took less than 5 seconds,
but 163 took more than 20. Let's remove it from the quick set.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test
- start two vms (vm_a, vm_b)
- in a
- do writes from set A
- do writes from set B
- fix bitmap sha256
- clear bitmap
- do writes from set A
- start migration
- than, in b
- wait vm start (postcopy should start)
- do writes from set B
- check bitmap sha256
The test should verify postcopy migration and then merging with delta
(changes in target, during postcopy process).
Reduce supported cache modes to only 'none', because with cache on time
from source.STOP to target.RESUME is unpredictable and we can fail with
timout while waiting for target.RESUME.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180313180320.339796-14-vsementsov@virtuozzo.com
The test starts two vms (vm_a, vm_b), create dirty bitmap in
the first one, do several writes to corresponding device and
then migrate vm_a to vm_b.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180313180320.339796-13-vsementsov@virtuozzo.com
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180312152126.286890-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This test case adds an NBD server export and then invokes
blockdev-snapshot-sync, which changes the BlockDriverState node that the
NBD server's BlockBackend points to. This is an interesting scenario to
test and exercises the code path fixed by the previous commit.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180306204819.11266-3-stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180119135719.24745-6-vsementsov@virtuozzo.com>
[eblake: adjust to next available test number]
Signed-off-by: Eric Blake <eblake@redhat.com>
When originally written, test 177 explicitly took care to run
with compat=0.10. Then I botched my own test in commit
81c219ac and f0a9c18f, by adding additional actions that require
v3 images. Split out the new code into a new v3-only test, 204,
and revert 177 back to its original state other than a new comment.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20180117165420.15946-2-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch implements a test case for the scenario that was failing
prior to the patch "migration/ram.c: do not set 'postcopy_running' in
POSTCOPY_INCOMING_END", commit acab30b85d.
This new test file 201 was derived from the test file 181 authored
by Kevin Wolf.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test case will prevent future regressions with savevm and
IOThreads.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171207201320.19284-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QMP 'transaction' blockdev-snapshot-sync with multiple disks in an
IOThread is an untested code path. Several bugs have been found in
connection with this command. This patch adds a test case to prevent
future regressions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-10-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test clearing unknown autoclear_features by qcow2 on incoming
migration.
[ kwolf: Fixed wait for destination VM startup ]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
After committing the qcow2 image contents into the base image, qemu-img
will call bdrv_make_empty to drop the payload in the layered image.
When this is done for qcow2 images, it blows away the LUKS encryption
header, making the resulting image unusable. There are two codepaths
for emptying a qcow2 image, and the second (slower) codepath leaves
the LUKS header intact, so force use of that codepath.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170929170843.3711-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a test for qcow2 copy-on-read behavior, including exposure
for the just-fixed bugs.
The copy-on-read behavior is always to a qcow2 image, but the
test is careful to allow running with most image protocol/format
combos as the backing file being copied from (luks being the
exception, as it is harder to pass the right secret to all the
right places). In fact, for './check nbd', this appears to be
the first time we've had a qcow2 image wrapping NBD, requiring
an additional line in _filter_img_create to match the similar
line in _filter_img_info.
Invoking blkdebug to prove we don't write too much took some
effort to get working; and it requires that $TEST_WRAP (based
on $TEST_DIR) not be subject to word splitting. We may decide
later to have the entire iotests suite use relative rather than
absolute names, to avoid problems inherited by the absolute
name of $PWD or $TEST_DIR, at which point the sanity check in
this commit could be simplified.
This test requires at least 2G of consecutive memory to succeed;
as such, it is prone to spurious failures, particularly on
32-bit machines under load. This situation is detected and
triggers an early exit to skip the test, rather than a failure.
To manually provoke this setup on a beefier machine, I used:
$ (ulimit -S -v 1000000; ./check -qcow2 197)
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-5-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This involves a temporary read-write reopen if the backing file link in
the middle of a backing file chain should be changed and is therefore a
good test for the latest bdrv_reopen() vs. op blockers fixes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Non-shared storage migration with NBD and drive-mirror is currently not
tested by qemu-iotests. This test case covers the basic migration
scenario.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Based-on: <20170823134242.12080-1-famz@redhat.com>
Message-Id: <20170823140506.28723-1-stefanha@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This serves as a regression test for the bugs that were just fixed for
bdrv_reopen() between read-only and read-write mode.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The new test 190 ensures we don't regress back to an infinite loop when
measuring the size of a 2T+ qcow2 image. I did not append to test 178,
because that test is also designed to run with format 'raw'; also, this
gives us some coverage of the measure command under the quick group.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A run of './check -qcow2 -g quick' on my machine produced only
two tests that took longer than 5 seconds; 178 took 18, and
189 took 7. Remove them from the quick group.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Daniel P. Berrangé