The highest cpu address is not the same as max_cpus. max_cpus
counts from 1 while the cpu address starts at 0.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <20171219082807.84494-1-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines where then manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines where then manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines where then manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[THH: Changed one missing fprintf into an error_report, too]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.
One line in hcd-musb.c was manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
CPU hot-plugging on s390x is possible with both, "cpu-add"
and "device_add", so test both.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Hot plugging on ppc64 is possible via "device_add", too. Unlike x86,
we must not specify a 'socket-id' and 'thread-id' here, so this needs
to be done with a separate function that just specifies the 'core-id'
during the "device_add".
Reviewed-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using 'device_add' instead of 'cpu-add' is the new way for
hot-plugging CPUs, so we should test this regularly, too.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test will be extended to work on other architectures, too, so let's
use a more generic name for the file and the functions in here first.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Python GDB support may use Python 2 or 3.
Inferior.read_memory() may return a 'buffer' with Python 2 or a
'memoryview' with Python 3 (see also
https://sourceware.org/gdb/onlinedocs/gdb/Inferiors-In-Python.html)
The elf.add_vmcoreinfo_note() method expects a "bytes" object. Wrap
the returned memory with bytes(), which works with both 'memoryview'
and 'buffer'.
Fixes a regression introduced with commit
d23bfa91b7 ("add vmcoreinfo").
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The vmstate description and the contained needed function for migration
of spapr_caps is the same for each cap, with the name of the cap
substituted. As such introduce a macro to allow for easier generation of
these.
Convert the three existing spapr_caps (htm, vsx, and dfp) to use this
macro.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The hypervisor doorbells are used by skiboot and Linux on POWER9
processors to wake up secondaries.
This adds processor control support to the Server architecture by
reusing the Embedded support. They are very similar, only the bits
definition of the CPU identifier differ.
Still to be done is message broadcast to all threads of the same
processor.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Noticed by Coverity
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Noticed by Coverity, forgotten in 5690d9ece
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We know that only one bit (in addition to SO) is going to be set in
the condition register, so do two movconds instead of three setconds,
three shifts and two ORs.
For ppc64-linux-user, the code size reduction is around 5% and the
performance improvement slightly less than 10%. For softmmu, the
improvement is around 5%.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 51f84465dd changed the compatility mode setting logic:
- machine reset only sets compatibility mode for the boot CPU
- compatibility mode is set for other CPUs when they are put online
by the guest with the "start-cpu" RTAS call
This causes a regression for machines started with max-compat-cpu:
the device tree nodes related to secondary CPU cores contain wrong
"cpu-version" and "ibm,pa-features" values, as shown below.
Guest started on a POWER8 host with:
-smp cores=2 -machine pseries,max-cpu-compat=compat7
ibm,pa-features = [18 00 f6 3f c7 c0 80 f0 80 00
00 00 00 00 00 00 00 00 80 00 80 00 80 00 00 00];
cpu-version = <0x4d0200>;
^^^
second CPU core
ibm,pa-features = <0x600f63f 0xc70080c0>;
cpu-version = <0xf000003>;
^^^
boot CPU core
The second core is advertised in raw POWER8 mode. This happens because
CAS assumes all CPUs to have the same compatibility mode. Since the
boot CPU already has the requested compatibility mode, the CAS code
does not set it for the secondary one, and exposes the bogus device
tree properties in in the CAS response to the guest.
A similar situation is observed when hot-plugging a CPU core. The
related device tree properties are generated and exposed to guest
with the "ibm,configure-connector" RTAS before "start-cpu" is called.
The CPU core is advertised to the guest in raw mode as well.
It both cases, it boils down to the fact that "start-cpu" happens too
late. This can be fixed globally by propagating the compatibility mode
of the boot CPU to the other CPUs during reset. For this to work, the
compatibility mode of the boot CPU must be set before the machine code
actually resets all CPUs.
It is not needed to set the compatibility mode in "start-cpu" anymore,
so the code is dropped.
Fixes: 51f84465dd
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A variable is already defined at the begining of the function to
hold a pointer to the CPU core object:
sPAPRCPUCore *core = SPAPR_CPU_CORE(OBJECT(dev));
No need to define it again in the pre-2.10 compatibility code snipplet.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
commit f03a1af581 ("ppc: Fix POWER7 and POWER8 exception definitions")
introduced definitions for the server doorbell exceptions by reusing
the embedded definitions but this adds complexity in the powerpc_excp()
routine. Let's introduce specific definitions for the Server doorbells
exception.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We've got the config switch CONFIG_PPC4XX, so we should use it
in the Makefile accordingly and only include the PPC4xx boards
if this switch has been enabled. (Note: Unfortunately, the files
ppc4xx_devs.c and ppc405_uc.c still have to be included in the
build anyway to fulfil some complicated linker dependencies ...
so these are subject to a more thourough clean-up later)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Order the CONFIG switches in ppc-softmmu.mak according to the machine
classes where they are used (embedded, Mac or PReP), so that it is
easier for the users to disable a set of switches completely if they
are not needed.
Also add the missing CONFIG_IDE_SII3112 switch to the embedded section
which was previously only added to ppcemb-softmmu.mak.
And while we're at it, also remove the CONFIG_IDE_CMD646 switch since
this controller does not seem to be used by any ppc machine in QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qemu-softmmu-ppc64 is supposed to be a superset of qemu-softmmu-ppc.
However, instead of simply including the 32-bit config file, we've
duplicated all CONFIG_xxx settings there instead. This way, we've missed
some CONFIG switches in ppc64-softmmu.mak which were only added to the
32-bit config file (e.g. CONFIG_SUNGEM). Let's fix this problem by
including the 32-bit config file into the 64-bit config file instead
of duplicating all the CONFIG switches there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The same definitions can also be found in include/hw/ide/ahci.h
so let's remove these #defines from ahci_internal.h.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1512457825-3847-1-git-send-email-thuth@redhat.com
[Maintainer edit: publicize object names, privatize object macros.]
Signed-off-by: John Snow <jsnow@redhat.com>
ATA8-ACS3, 7.9 DATA SET MANAGEMENT - 06h, DMA
7.9.5 Error Outputs
If the Trim bit is set to one and:
a) the device detects an invalid LBA Range Entry; or
b) count is greater than IDENTIFY DEVICE data word 105
(see 7.16.7.55),
then the device shall return command aborted.
A device may trim one or more LBA Range Entries before it returns
command aborted. See table 209.
This check is not in the common ide_dma_cb() as the range for TRIM
is harder to reach: it is not in LBA/count registers and the buffer has
to be parsed first.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-id: 1512735034-35327-4-git-send-email-anton.nefedov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
When all the fw_cfg slots are used, a write is made outside the
bounds of the fw_cfg files array as part of the sort algorithm.
Fix it by avoiding an unnecessary array element move.
Fix also an assert while at it.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20180108215007.46471-1-marcel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Remove dependency of possible_cpus on 1st CPU instance,
which decouples configuration data from CPU instances that
are created using that data.
Also later it would be used for enabling early cpu to numa node
configuration at runtime qmp_query_hotpluggable_cpus() should
provide a list of available cpu slots at early stage,
before machine_init() is called and the 1st cpu is created,
so that mgmt might be able to call it and use output to set
numa mapping.
Use MachineClass::possible_cpu_arch_ids() callback to set
cpu type info, along with the rest of possible cpu properties,
to let machine define which cpu type* will be used.
* for SPAPR it will be a spapr core type and for ARM/s390x/x86
a respective descendant of CPUClass.
Move parse_numa_opts() in vl.c after cpu_model is parsed into
cpu_type so that possible_cpu_arch_ids() would know which
cpu_type to use during layout initialization.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1515597770-268979-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently the only vNVDIMM backend can guarantee the guest write
persistence is device DAX on Linux, because no host-side kernel cache
is involved in the guest access to it. The approach to detect whether
the backend is device DAX needs to access sysfs, which may not work
with SELinux.
Instead, we add the 'unarmed' option to device 'nvdimm', so that users
or management utils, which have enough knowledge about the backend,
can control the unarmed flag in guest ACPI NFIT via this option. The
guest Linux NVDIMM driver, for example, will mark the corresponding
vNVDIMM device read-only if the unarmed flag in guest NFIT is set.
The default value of 'unarmed' option is 'off' in order to keep the
backwards compatibility.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-4-haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When mmap(2) the backend files, QEMU uses the host page size
(getpagesize(2)) by default as the alignment of mapping address.
However, some backends may require alignments different than the page
size. For example, mmap a device DAX (e.g., /dev/dax0.0) on Linux
kernel 4.13 to an address, which is 4K-aligned but not 2M-aligned,
fails with a kernel message like
[617494.969768] dax dax0.0: qemu-system-x86: dax_mmap: fail, unaligned vma (0x7fa37c579000 - 0x7fa43c579000, 0x1fffff)
Because there is no common approach to get such alignment requirement,
we add the 'align' option to 'memory-backend-file', so that users or
management utils, which have enough knowledge about the backend, can
specify a proper alignment via this option.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-2-haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[ehabkost: fixed typo, fixed error_setg() format string]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
These are crashes / errors which have been fixed already in the past
months. We can remove these from the device-crash-test script now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1513613438-11017-1-git-send-email-thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The qdev_unplug() function contains a g_assert(hotplug_ctrl) statement,
so QEMU crashes when the user tries to device_add + device_del a device
that does not have a corresponding hotplug controller. This could be
provoked for a couple of devices in the past (see commit 4c93950659
or 84ebd3e8c7 for example), and can currently for example also be
triggered like this:
$ s390x-softmmu/qemu-system-s390x -M none -nographic
QEMU 2.10.50 monitor - type 'help' for more information
(qemu) device_add qemu-s390x-cpu,id=x
(qemu) device_del x
**
ERROR:qemu/qdev-monitor.c:872:qdev_unplug: assertion failed: (hotplug_ctrl)
Aborted (core dumped)
So devices clearly need a hotplug controller when they should be usable
with device_add.
The code in qdev_device_add() already checks whether the bus has a proper
hotplug controller, but for devices that do not have a corresponding bus,
there is no appropriate check available yet. In that case we should check
whether the machine itself provides a suitable hotplug controller and
refuse to plug the device if none is available.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1509617407-21191-3-git-send-email-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of doing the clean-ups on errors multiple times, introduce
a jump label at the end of the function that can be used by all
error paths that need this cleanup.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1509617407-21191-2-git-send-email-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The only user-creatable sysbus devices in qemu-system-x86_64 are
amd-iommu, intel-iommu, and xen-backend. xen-backend is handled
by xen_set_dynamic_sysbus(), so we only need to add amd-iommu and
intel-iommu.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-7-ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There's no need to make the machine allow every possible sysbus
device. We can now just add xen-sysdev to the allowed list.
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: xen-devel@lists.xenproject.org
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-6-ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
TYPE_SPAPR_PCI_HOST_BRIDGE is the only dynamic sysbus device not
rejected by ppc_spapr_reset(), so it can be the only entry on the
allowed list.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-5-ehabkost@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
platform_bus_create_devtree() already rejects all dynamic sysbus
devices except TYPE_ETSEC_COMMON, so register it as the only
allowed dynamic sysbus device for the ppce500 machine-type.
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-4-ehabkost@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Replace the TYPE_SYS_BUS_DEVICE entry in the allowed sysbus
device list with the two device types that are really supported
by the virt machine: vfio-amd-xgbe and vfio-calxeda-xgmac.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The existing has_dynamic_sysbus flag makes the machine accept
every user-creatable sysbus device type on the command-line.
Replace it with a list of allowed device types, so machines can
easily accept some sysbus devices while rejecting others.
To keep exactly the same behavior as before, the existing
has_dynamic_sysbus=true assignments are replaced with a
TYPE_SYS_BUS_DEVICE entry on the allowed list. Other patches
will replace the TYPE_SYS_BUS_DEVICE entries with more specific
lists of devices.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-2-ehabkost@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a function to only create a memfd, without mmap. The function is
used in the following memory backend.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20171023141815.17709-2-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A bunch of fixes, cleanus and new features all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaYQZfAAoJECgfDbjSjVRpnwsIAKwqHUL3TaijtxrHhrVc4vCJ
vkEuO09ZTT5qSvZpqyZjLZ+lTC8MpXIZAbC66PLtYLObGTEq88943BFjmscrjcwt
gCX3hvcurbulLbyWrIxLSwiPZ4tjzp1ZHRIoxB83wCQ4ipGN5A76n78asY69nuwP
EDmqzQVDm83FSEkE8uwkO/6Ft5l4z/zUHT6b6Hx5J6JpRkHNNDJSz4QHppPYmaNH
5tsYECg2ztYryedd45Toh53q21fjz8oK5bSoO02Cfm+dbf3kGtIeZF8eLprqVGxZ
s8TWUfdXwHLJhqiYTDZZ0glaatZhT0yvedgO0CR1ABco4iEIcZX61Z5mzBVvLOI=
=B+bl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: features, fixes, cleanups
A bunch of fixes, cleanus and new features all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 18 Jan 2018 20:41:03 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (29 commits)
vhost: remove assertion to prevent crash
vhost-user: fix misaligned access to payload
vhost-user: factor out msg head and payload
tests: acpi: add comments to fetch_rsdt_referenced_tables/data->tables usage
tests: acpi: rename test_acpi_tables()/test_dst_table() to reflect its usage
tests: acpi: init table descriptor in test_dst_table()
tests: acpi: move tested tables array allocation outside of test_acpi_dsdt_table()
x86_iommu: check if machine has PCI bus
x86_iommu: Move machine check to x86_iommu_realize()
vhost-user-test: use init_virtio_dev in multiqueue test
vhost-user-test: make features mask an init_virtio_dev() argument
vhost-user-test: setup virtqueues in all tests
vhost-user-test: extract read-guest-mem test from main loop
vhost-user-test: fix features mask
hw/acpi-build: Make next_base easy to follow
ACPI/unit-test: Add a testcase for RAM allocation in numa node
hw/pci-bridge: fix QEMU crash because of pcie-root-port
intel-iommu: Extend address width to 48 bits
intel-iommu: Redefine macros to enable supporting 48 bit address width
vhost-user: fix multiple queue specification
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU will assert on vhost-user backed virtio device hotplug if QEMU is
using more RAM regions than VHOST_MEMORY_MAX_NREGIONS (for example if
it were started with a lot of DIMM devices).
Fix it by returning error instead of asserting and let callers of
vhost_set_mem_table() handle error condition gracefully.
Cc: qemu-stable@nongnu.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We currently take a pointer to a misaligned field of a packed structure.
clang reports this as a build warning.
A fix is to keep payload in a separate structure, and access is it
from there using a vectored write.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Christian Borntraeger