A number of source files have statements accidentally
terminated by a double semicolon - eg 'foo = bar;;'.
This is harmless but a mistake none the less.
The tcg/ia64/tcg-target.c file is whitelisted because
it has valid use of ';;' in a comment containing assembly
code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There are several error messages that identify a BlockDriverState by
its device name. However those errors can be produced in nodes that
don't have a device name associated.
In those cases we should use bdrv_get_device_or_node_name() to fall
back to the node name and produce a more meaningful message. The
messages are also updated to use the more generic term 'node' instead
of 'device'.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 9823a1f0514fdb0692e92868661c38a9e00a12d6.1428485266.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix the length of the zero-fill for the back, which was accidentally
using the same value as for the front. This is caught by qemu-iotests
033.
For consistency, change the code for the front as well to use the length
stored in the iov (it is the same value, copied four lines above).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Jeff Cody <jcody@redhat.com>
The v1.0.0 spec calls out PAYLOAD_BLOCK_ZERO FileOffsetMB field as being
'reserved'. In practice, this means that Hyper-V will fail to read a
disk image with PAYLOAD_BLOCK_ZERO block states with a FileOffsetMB
value other than 0.
The other states that indicate a block that is not there
(PAYLOAD_BLOCK_UNDEFINED, PAYLOAD_BLOCK_NOT_PRESENT,
PAYLOAD_BLOCK_UNMAPPED) have multiple options for what FileOffsetMB may
be set to, and '0' is explicitly called out as an option.
For all the above states, we will also just set the FileOffsetMB value
to 0.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: a9fe92f53f07e6ab1693811e4312c0d1e958500b.1421787566.git.jcody@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that new VHDX images will default to BAT block states of
PAYLOAD_BLOCK_ZERO, we can indicate that VHDX has zero init.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 5e582703e36450b9ca939e2e5c9fa3930030f7fe.1418018421.git.jcody@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The VHDX spec specifies that the default new block state is
PAYLOAD_BLOCK_NOT_PRESENT for a dynamic VHDX image, and
PAYLOAD_BLOCK_FULLY_PRESENT for a fixed VHDX image.
However, in order to create space-efficient VHDX images with qemu-img
convert, it is desirable to be able to set has_zero_init to true for
VHDX.
There is currently an option when creating VHDX images, to use block
state ZERO for new blocks. However, this currently defaults to 'off'.
In order to be able to eventually set has_zero_init to true for VHDX,
this needs to default to 'on'.
This patch changes the default to 'on', and provides some help
information to warn against setting it to 'off' when using qemu-img
convert.
[Max Reitz pointed out that a full stop was missing at the end of the
VHDX_BLOCK_OPT_ZERO option help text. I have added it.
--Stefan]
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 85164899eacc86e150c3ceba793cf93b398dedd7.1418018421.git.jcody@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 0.95 VHDX spec defined PAYLOAD_BLOCK_UNMAPPED to be 5. The 1.00
VHDX spec redefines PAYLOAD_BLOCK_UNMAPPED to be 3 instead.
The original value of 5 is now an undefined state in the spec, but it
should be safe to treat it the same and return zeros for data read.
This way, we can maintain compatibility with any images out in the wild
that may have been created in accordance to the 0.95 spec.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 8a4d2da73a8dbc04cde62bea782fc09ff84b1cf1.1418018421.git.jcody@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
device_name[] can become non-empty only in bdrv_new_root() and
bdrv_move_feature_fields(). The latter is used only to undo damage
done by bdrv_swap(). The former is called only by blk_new_with_bs().
Therefore, when a BlockDriverState's device_name[] is non-empty, then
it's been created with a BlockBackend, and vice versa. Furthermore,
blk_new_with_bs() keeps the two names equal.
Therefore, device_name[] is redundant. Eliminate it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In vhdx_create_metadata(), we allocate 40 bytes to entry_buffer for
the various metadata table entries. However, we write out 64kB from
that buffer into the new file. Only write out the correct 40 bytes.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The parent_vhdx_guid variable is defined but never used, which provokes
complaints from newer versions of clang. Since the variable definition
is here acting as documentation of the image format, mark it with the
'unused' attribute to keep the compiler happy rather than simply
deleting it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When trying to create a fixed vhd image qemu-img will return the
following error:
qemu-img: test.vhdx: Could not create image: Cannot allocate memory
This happens because of a incorrect check in vhdx.c. Specifficaly,
in vhdx_create_bat(), after allocating memory for the BAT entry,
there is a check to determine if the allocation was unsuccsessful.
The error comes from the fact that it checks if s->bat isn't NULL,
which is true in case of succsessful allocation, and exits with
error ENOMEM.
Signed-off-by: Adelina Tuvenie <atuvenie@cloudbasesolutions.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently the file size requested by user is rounded down to nearest
sector, causing the actual file size could be a bit less than the size
user requested. Since some formats (like qcow2) record virtual disk
size in bytes, this can make the last few bytes cannot be accessed.
This patch fixes it by rounding up file size to nearest sector so that
the actual file size is no less than the requested file size.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
Patch created with Coccinelle, with two manual changes on top:
* Add const to bdrv_iterate_format() to keep the types straight
* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
inexplicably misses
Coccinelle semantic patch:
@@
type T;
@@
-g_malloc(sizeof(T))
+g_new(T, 1)
@@
type T;
@@
-g_try_malloc(sizeof(T))
+g_try_new(T, 1)
@@
type T;
@@
-g_malloc0(sizeof(T))
+g_new0(T, 1)
@@
type T;
@@
-g_try_malloc0(sizeof(T))
+g_try_new0(T, 1)
@@
type T;
expression n;
@@
-g_malloc(sizeof(T) * (n))
+g_new(T, n)
@@
type T;
expression n;
@@
-g_try_malloc(sizeof(T) * (n))
+g_try_new(T, n)
@@
type T;
expression n;
@@
-g_malloc0(sizeof(T) * (n))
+g_new0(T, n)
@@
type T;
expression n;
@@
-g_try_malloc0(sizeof(T) * (n))
+g_try_new0(T, n)
@@
type T;
expression p, n;
@@
-g_realloc(p, sizeof(T) * (n))
+g_renew(T, p, n)
@@
type T;
expression p, n;
@@
-g_try_realloc(p, sizeof(T) * (n))
+g_try_renew(T, p, n)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the vhdx block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
This patch contains several changes for endian conversion fixes for
VHDX, particularly for big-endian machines (multibyte values in VHDX are
all on disk in LE format).
Tests were done with existing qemu-iotests on an IBM POWER7 (8406-71Y).
This includes sample images created by Hyper-V, both with dirty logs and
without.
In addition, VHDX image files created (and written to) on a BE machine
were tested on a LE machine, and vice-versa.
Reported-by: Markus Armburster <armbru@redhat.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The VHDX spec v1.00 declares that "a header is current if it is the only
valid header or if it is valid and its SequenceNumber field is greater
than the other header’s SequenceNumber field. The parser must only use
data from the current header. If there is no current header, then the
VHDX file is corrupt."
However, the Disk2VHD tool from Microsoft creates a VHDX image file that
has 2 identical headers, including matching checksums and matching
sequence numbers. Likely, as a shortcut the tool is just writing the
header twice, for the active and inactive headers, during the image
creation. Technically, this should be considered a corrupt VHDX file
(at least per the 1.00 spec, and that is how we currently treat it).
But in order to accomodate images created with Disk2VHD, we can safely
create an exception for this case. If we find identical sequence
numbers, then we check the VHDXHeader-sized chunks of each 64KB header
sections (we won't rely just on the crc32c to indicate the headers are
the same). If they are identical, then we go ahead and use the first
one.
Reported-by: Nerijus Baliūnas <nerijus@users.sourceforge.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Other variables (e.g. sectors_per_block) are calculated using these
variables, and if not range-checked illegal values could be obtained
causing infinite loops and other potential issues when calculating
BAT entries.
The 1.00 VHDX spec requires BlockSize to be min 1MB, max 256MB.
LogicalSectorSize is required to be either 512 or 4096 bytes.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the bdrv_open() option BDRV_O_PROTOCOL which results in passing the
call to bdrv_file_open(). Additionally, make bdrv_file_open() static and
therefore bdrv_open() the only way to call it.
Consequently, all existing calls to bdrv_file_open() have to be adjusted
to use bdrv_open() with the BDRV_O_PROTOCOL flag instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Errors are inadvertently ignored in a few places. Has always been
broken. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow specifying a reference to an existing block device (by name) for
bdrv_file_open() instead of a filename and/or options.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If there is a dirty log file to be replayed in a VHDX image, it is
replayed in .vhdx_open(). However, if the file is opened read-only,
then a somewhat cryptic error message results.
This adds a more helpful error message for the user. If an image file
contains a log to be replayed, and is opened read-only, the user is
instructed to run 'qemu-img check -r all' on the image file.
Running qemu-img check -r all will cause the image file to be opened
r/w, which will replay the log file. If a log file replay is detected,
this is flagged, and bdrv_check will increase the corruptions_fixed
count for the image.
[Fixed typo in error message that was pointed out by Eric Blake
<eblake@redhat.com>.
--Stefan]
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds support for VHDX image creation, for images of type "Fixed"
and "Dynamic". "Differencing" types (i.e., VHDX images with backing
files) are currently not supported.
Options for image creation include:
* log size:
The size of the journaling log for VHDX. Minimum is 1MB,
and it must be a multiple of 1MB. Invalid log sizes will be
silently fixed by rounding up to the nearest MB.
Default is 1MB.
* block size:
This is the size of a payload block. The range is 1MB to 256MB,
inclusive, and must be a multiple of 1MB as well. Invalid sizes
and multiples will be silently fixed. If '0' is passed, then
a sane size is chosen (depending on virtual image size).
Default is 0 (Auto-select).
* subformat:
- "dynamic"
An image without data pre-allocated.
- "fixed"
An image with data pre-allocated.
Default is "dynamic"
When creating the image file, the lettered sections are created:
-----------------------------------------------------------------.
| (A) | (B) | (C) | (D) | (E)
| File ID | Header1 | Header 2 | Region Tbl 1 | Region Tbl 2
| | | | |
.-----------------------------------------------------------------.
0 64KB 128KB 192KB 256KB 320KB
.---- ~ ----------- ~ ------------ ~ ---------------- ~ -----------.
| (F) | (G) | (H) |
| Journal Log | BAT / Bitmap | Metadata | .... data ......
| | | |
.---- ~ ----------- ~ ------------ ~ ---------------- ~ -----------.
1MB (var.) (var.) (var.)
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is preperation for vhdx_create(). The ability to write headers,
and calculate the number of BAT entries will be needed within the
create() functions, so move this relevant code into helper functions.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In preparation for vhdx_create(), move more endian translation
functions out to vhdx-endian.c.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Bit shifting can be fun, but in this case it was unnecessary. The
upper 44 bits of the 64-bit BAT entry is specifies the File Offset,
so we shifted the bits to get access to the value.
However, per the spec the value is in MB. So we dutifully shifted back
to the left by 20 bits, to convert to a true uint64_t file offset.
This replaces those steps with just a bit mask, to get rid of the lower
20 bits instead.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds support for writing to VHDX image files, using coroutines.
Writes into the BAT table goes through the VHDX log. Currently, BAT
table writes occur when expanding a dynamic VHDX file, and allocating a
new BAT entry.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Regions in the image file cannot overlap - the log, region tables,
and metdata must all be unique and non-overlapping.
This adds region checking by means of a QLIST; there can be a variable
number of regions and metadata (there may be metadata or region tables
that we do not recognize / know about, but are not required).
This adds the capability to register a region for later checking, and
to check against registered regions for any overlap.
Also, if neither the BAT or Metadata region tables are found, return
error.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds support for VHDX v0 logs, as specified in Microsoft's
VHDX Specification Format v1.00:
https://www.microsoft.com/en-us/download/details.aspx?id=34750
The following support is added:
* Log parsing, and validation - validate that an existing log
is correct.
* Log search - search through an existing log, to find any valid
sequence of entries.
* Log replay and flush - replay an existing log, and flush/clear
the log when complete.
The VHDX log is a circular buffer, with elements (sectors) of 4KB.
A log entry is a variably-length number of sectors, that is
comprised of a header and 'descriptors', that describe each sector.
A log may contain multiple entries, know as a log sequence. In a log
sequence, each log entry immediately follows the previous entry, with an
incrementing sequence number. There can only ever be one active and
valid sequence in the log.
Each log entry must match the file log GUID in order to be valid (along
with other criteria). Once we have flushed all valid log entries, we
marked the file log GUID to be zero, which indicates a buffer with no
valid entries.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow tracking of first file write in the VHDX image, as well as
the ability to update the GUID in the header. This is in preparation
for log support.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This moves the endian translation functions out from the vhdx.c source,
into a separate source file. In addition to the previously defined
endian functions, new endian translation functions for log support are
added as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In preparation for VHDX log support, move these structures to the
header.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds the ability to update the headers in a VHDX image, including
generating a new MS-compatible GUID.
As VHDX depends on uuid.h, VHDX is now a configurable build option. If
VHDX support is enabled, that will also enable uuid as well. The
default is to have VHDX enabled.
To enable/disable VHDX: --enable-vhdx, --disable-vhdx
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Just a couple of minor comments to help note where allocated
buffers are freed, and a typo fix.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This blocks migration for VHDX image files, until the
functionality can be supported.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds in read-only support to the VHDX image format. This supports
reads for fixed-size, and dynamic sized VHDX images.
Differencing files are still unsupported.
The image must be opened without BDRV_O_RDWR set, because we do not
yet update the headers. I.e., pass 'readonly=on' in the drive image
options from the QEMU commandline.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the initial block driver framework for VHDX image support
(i.e. Hyper-V image file formats), that supports opening VHDX files, and
parsing the headers.
This commit does not yet enable:
- reading
- writing
- updating the header
- differencing files (images with parents)
- log replay / dirty logs (only clean images)
This is based on Microsoft's VHDX specification:
"VHDX Format Specification v0.95", published 4/12/2012
https://www.microsoft.com/en-us/download/details.aspx?id=29681
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange