The xen pci_assign_dev_load_option_rom() currently creates a RAM
memory region with memory_region_init_ram_nomigrate(), and then
manually registers it with vmstate_register_ram(). In fact for
its only callsite, the 'owner' pointer we use for the init call
and the '&dev->qdev' pointer we use for the vmstate_register_ram()
call refer to the same object. Simplify the function to only
take a pointer to the device once instead of twice, and use
memory_region_init_ram() which automatically does the vmstate
register for us.
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a MSI interrupt is bound to a guest using
xc_domain_update_msi_irq (XEN_DOMCTL_bind_pt_irq) the interrupt is
left masked by default.
This causes problems with guests that first configure interrupts and
clean the per-entry MSIX table mask bit and afterwards enable MSIX
globally. In such scenario the Xen internal msixtbl handlers would not
detect the unmasking of MSIX entries because vectors are not yet
registered since MSIX is not enabled, and vectors would be left
masked.
Introduce a new flag in the gflags field to signal Xen whether a MSI
interrupt should be unmasked after being bound.
This also requires to track the mask register for MSI interrupts, so
QEMU can also notify to Xen whether the MSI interrupt should be bound
masked or unmasked
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reported-by: Andreas Kinzler <hfp@posteo.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
To catch the error message. Also modify the caller
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To catch the error message. Also modify the caller
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Introduce yet another mask for them, so that the generic routine can
handle them, at once rendering xen_pt_pmcsr_reg_write() superfluous.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The remaining log message in pci_msix_write() is wrong, as there guest
behavior may only appear to be wrong: For one, the old logic didn't
take the mask-all bit into account. And then this shouldn't depend on
host device state (i.e. the host may have masked the entry without the
guest having done so). Plus these writes shouldn't be dropped even when
an entry gets unmasked. Instead, if they can't be made take effect
right away, they should take effect on the next unmasking or enabling
operation - the specification explicitly describes such caching
behavior.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
msix->mmio is added to XenPCIPassthroughState's object as property.
object_finalize_child_property is called for XenPCIPassthroughState's
object, which calls object_property_del_all, which is going to try to
delete msix->mmio. object_finalize_child_property() will access
msix->mmio's obj. But the whole msix struct has already been freed
by xen_pt_msix_delete. This will cause segment fault when msix->mmio
has been overwritten.
This patch is to fix the issue.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To deal with xen_host_pci_[set|get]_ functions returning error values
and clearing ourselves in the init function we should make the
.exit (xen_pt_unregister_device) function be idempotent in case
the generic code starts calling .exit (or for fun does it before
calling .init!).
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
We do not want to have two entries to cache the guest configuration
registers: XenPTReg->data and dev.config. Instead we want to use
only the dev.config.
To do without much complications we rip out the ->data field
and replace it with an pointer to the dev.config. This way we
have the type-checking (uint8_t, uint16_t, etc) and as well
and pre-computed location.
Alternatively we could compute the offset in dev.config by
using the XenPTRRegInfo and XenPTRegGroup every time but
this way we have the pre-computed values.
This change also exposes some mis-use:
- In 'xen_pt_status_reg_init' we used u32 for the Capabilities Pointer
register, but said register is an an u16.
- In 'xen_pt_msgdata_reg_write' we used u32 but should have only use u16.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
As we do not use it outside our code.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The OpRegion shouldn't be mapped 1:1 because the address in the host
can't be used in the guest directly.
This patch traps read and write access to the opregion of the Intel
GPU config space (offset 0xfc).
The original patch is from Jean Guyader <jean.guyader@eu.citrix.com>
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Now we retrieve VGA bios like kvm stuff in qemu but we need to
fix Device Identification in case if its not matched with the
real IGD device since Seabios is always trying to compare this
ID to work out VGA BIOS.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This is done indirectly by adjusting two typedefs and helps emphasizing
that the respective tables aren't supposed to be modified at runtime
(as they may be shared between devices).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
... by default. Add a per-device "permissive" mode similar to pciback's
to allow restoring previous behavior (and hence break security again,
i.e. should be used only for trusted guests).
This is part of XSA-131.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>)
The adjustments are solely to make the subsequent patches work right
(and hence make the patch set consistent), namely if permissive mode
(introduced by the last patch) gets used (as both reserved registers
and reserved fields must be similarly protected from guest access in
default mode, but the guest should be allowed access to them in
permissive mode).
This is a preparatory patch for XSA-131.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Limit error messages resulting from bad guest behavior to avoid allowing
the guest to cause the control domain's disk to fill.
The first message in pci_msix_write() can simply be deleted, as this
is indeed bad guest behavior, but such out of bounds writes don't
really need to be logged.
The second one is more problematic, as there guest behavior may only
appear to be wrong: For one, the old logic didn't take the mask-all bit
into account. And then this shouldn't depend on host device state (i.e.
the host may have masked the entry without the guest having done so).
Plus these writes shouldn't be dropped even when an entry is unmasked.
Instead, if they can't be made take effect right away, they should take
effect on the next unmasking or enabling operation - the specification
explicitly describes such caching behavior. Until we can validly drop
the message (implementing such caching/latching behavior), issue the
message just once per MSI-X table entry.
Note that the log message in pci_msix_read() similar to the one being
removed here is not an issue: "addr" being of unsigned type, and the
maximum size of the MSI-X table being 32k, entry_nr simply can't be
negative and hence the conditonal guarding issuing of the message will
never be true.
This is XSA-130.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The old logic didn't work as intended when an access spanned multiple
fields (for example a 32-bit access to the location of the MSI Message
Data field with the high 16 bits not being covered by any known field).
Remove it and derive which fields not to write to from the accessed
fields' emulation masks: When they're all ones, there's no point in
doing any host write.
This fixes a secondary issue at once: We obviously shouldn't make any
host write attempt when already the host read failed.
This is XSA-128.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Peter Maydell