crash assumes the physical base in the kdump subheader of
makedumpfile formatted dumps is correct. Zero is not correct
for all architectures, so allow it to be changed.
(No functional change.)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-5-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is necessary for targets that don't have TARGET_PAGE_SIZE ==
real-target-page-size. The target should set the page size to the
correct one, if known, or, if not known, to the maximum page size
it supports.
(No functional change.)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-4-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only one of three architectures implementing qmp-dump-guest-memory write
qemu notes. And, another architecture (arm/aarch64) is coming, which
won't use them either. Make the common implementation truly common.
(No functional change.)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
dump-guest-memory is supported by more than just x86, however
the paging option is not.
(No functional change.)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1452542185-10914-2-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Xilinx ZynqMP SoC and EP108 board supports three memory regions:
- A 2GB region starting at 0
- A 32GB region starting at 32GB
- A 256GB region starting at 768GB
This patch adds support for the first two memory regions, which is
automatically created based on the size specified by the QEMU memory
command line argument.
On hardware the physical memory region is one continuous region, it is then
mapped into the three different regions by the DDRC. As we don't model the
DDRC this is done at startup by QEMU. The board creates the memory region and
then passes that memory region to the SoC. The SoC then maps the memory
regions.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: a1e47db941d65733724a300fcd98b74fbeeaaf22.1452637205.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
arm_regime_using_lpae_format checks whether the LPAE extension is used
for stage 1 translation regimes. MMU indexes not exclusively of a stage 1
regime won't work with this method.
In case of ARMMMUIdx_S12NSE0 or ARMMMUIdx_S12NSE1, offset these values
by ARMMMUIdx_S1NSE0 to get the right index indicating a stage 1
translation regime.
Rename also the function to arm_s1_regime_using_lpae_format and update
the comments to reflect the change.
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Message-id: 1452854262-19550-1-git-send-email-a.rigo@virtualopensystems.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 8acc216b95 attempted to silence some sign-compare
warnings in libvixl by adding -Wno-sign-compare to the CFLAGS
for the relevant objects. Unfortunately it was ineffective
because it was placed before $(QEMU_CFLAGS), so the -Wall in
the general flags overrode -Wno-sign-compare rather than
vice-versa. Reorder the flags so the warning suppression works.
Thanks to Franz-Josef Haider <Franz-Josef.Haider@student.uibk.ac.at>
for pointing out what was wrong with the original patch.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1452783202-576-1-git-send-email-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OVhB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2016-01-13' into staging
Error reporting patches for 2016-01-13
# gpg: Signature made Wed 13 Jan 2016 14:21:48 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2016-01-13: (41 commits)
checkpatch: Detect newlines in error_report and other error functions
error: Consistently name Error * objects err, and not errp
s390/sclp: Simplify control flow in sclp_realize()
hw/s390x: Rename local variables Error *l_err to just err
error: Clean up errors with embedded newlines (again)
vhdx: Fix "log that needs to be replayed" error message
pci-assign: Clean up "Failed to assign" error messages
vmdk: Clean up "Invalid extent lines" error message
vmdk: Clean up control flow in vmdk_parse_extents() a bit
error: Strip trailing '\n' from error string arguments (again)
qemu-io qemu-nbd: Use error_report() etc. instead of fprintf()
migration: Use error_reportf_err() instead of monitor_printf()
spapr: Use error_reportf_err()
error: Use error_prepend() where it makes obvious sense
error: Use error_reportf_err() where it makes obvious sense
error: Don't decorate original error message when adding to it
error: New error_prepend(), error_reportf_err()
test-throttle: Simplify qemu_init_main_loop() error handling
qemu-nbd: Clean up "Failed to load snapshot" error message
block: Clean up "Could not create temporary overlay" error message
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- new compat machine
- remove the old s390-virtio machine
- fixes and some cleanup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=BUUK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20160113' into staging
This first round of s390x patches includes:
- new compat machine
- remove the old s390-virtio machine
- fixes and some cleanup
# gpg: Signature made Wed 13 Jan 2016 14:55:55 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20160113:
s390x/pci: return real state during listing PCI
virtio-ccw: fix sanity check for vector
s390: Introduce CCW_COMPAT_2_5
s390x/virtio: use qemu_check_nic_model()
s390x/pci: code cleanup
s390x/pci: reject some operations to disabled PCI function
s390x: remove s390-virtio devices
s390x: remove s390-virtio machine
s390x: add 2.6 compat machine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWlihJAAoJEB6aO1+FQIO2ghMQAI1PArGXyhM93YT3ajWLExcV
PNCV2ECW6a41Pt/uJPJfXgK9/eGNGwHD32jIMvVECdXMx9fsckAjr46sb4i3zYIm
xiGGGlavjzNedWwaHpxV/U0gI68KIK3WHgFjEtWw1KXEXE3ZVF+u9eHgcRx4hAtg
W1JIPAVZ8hrMdlnN/WrDa7O6F7TQLCvX9SMuHxfAkE6jYJeABQt6PpSMMPZfWjmQ
R80kNpDUayRJ/ASVaFiZ/t7bZHAgZC1aj6AuMEY93u/ROfZmKZtUxk1qbKrEUMGa
WWXOW/UupSzBYUpjjC9MBMW9JxP06YDd2JbkKcS4pClPBeNltQBb2QXQ5YJ5dkgM
cTnYgD+ZWamYT802/kAxiKplcbTtVnUMTiGdG9ybMeg0FtN7zU6rvlGbG7+J318Q
sWBjberCXNLVSbpIaHY8ZhkYIUqZNXOqllnqIZZSdsP3XoWHqA5q+RzoNHuDl1+6
P5iCcLfxnjKEkl5F5x8cxS8Z99BpIv/dmRjHy5CTSsDP+v6P/msO/QBootWNibtq
kBk7luNqmx7YwCQBOQ6P56X+wrAG4ZOKY2Ew3SEP/ZLMdwEmH48hsNAQvdvmmQk9
s/fF6JX8qqdKBL4HNgxa1mac+baHanq7PpmmYMbSZ51wVh7GGJH+pphNr5TZYCaj
tqNQrPwwzu9rtNh6+hxg
=WXmY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.6-1' into staging
migration fixes for postcopy, xbzrle, multithread decompression
# gpg: Signature made Wed 13 Jan 2016 10:34:49 GMT using RSA key ID 854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-migration/tags/migration-for-2.6-1:
multithread decompression: Avoid one copy
Use qemu_get_buffer_in_place for xbzrle data
Migration: Emit event at start of pass
Postcopy: Send events/change state on incoming side
migration: Add state records for migration incoming
migration: Export migrate_set_state()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We don't want newlines embedded in error messages. This seems to be a common
problem with new code so let's try to catch it with checkpatch.
This will not catch cases where newlines are inserted into the middle of an
existing multi-line statement. But those cases should be rare.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <1449858642-24267-1-git-send-email-jjherne@linux.vnet.ibm.com>
[Rephrased "Error function text" to "Error messages", dropped
error_vprintf, error_printf, error_printf from $qemu_error_funcs,
because they may legitimately print newlines]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-25-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Let's follow established naming practice here as well.
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-23-git-send-email-armbru@redhat.com>
The arguments of error_report() should yield a short error string
without newlines.
A few places try to print additional help after the error message by
embedding newlines in the error string. That's nice, but let's do it
the right way. Commit 474c213 cleaned up some, but they keep coming
back. Offenders tracked down with the Coccinelle semantic patch from
commit 312fd5f.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The arguments of error_setg_errno() should yield a short error string
without newlines.
Here, we try to append additional help to the error message by
embedding newlines in the error string. That's nice, but it's doesn't
play nicely with the errno part. tests/qemu-iotests/070.out shows the
resulting mess:
can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed. To replay the log, execute:
qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx': Operation not permitted
Switch to error_setg() and error_append_hint(). Result:
can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed
To replay the log, run:
qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx'
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-21-git-send-email-armbru@redhat.com>
The arguments of error_setg() & friends should yield a short error
string without newlines.
Two places try to append additional help to the error message by
embedding newlines in the error string. That's nice, but let's do it
the right way, with error_append_hint().
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-20-git-send-email-armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
vmdk_parse_extents() reports parse errors like this:
error_setg(errp, "Invalid extent lines:\n%s", p);
where p points to the beginning of the malformed line in the image
descriptor. This results in a multi-line error message
Invalid extent lines:
<first line that doesn't parse>
<remaining text that may or may not parse, if any>
Error messages should not have newlines embedded. Since the remaining
text is not helpful, we can simply report:
Invalid extent line: <first line that doesn't parse>
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-19-git-send-email-armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Factor out loop stepping to turn a while-loop with goto into a
for-loop with continue.
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1450452927-8346-18-git-send-email-armbru@redhat.com>
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back. Tracked down with the Coccinelle semantic patch
from commit 312fd5f.
Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
Just three instances left.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-16-git-send-email-armbru@redhat.com>
Both error_reportf_err() and monitor_printf() print to the same
destination when monitor_printf() is used correctly, i.e. within an
HMP monitor. Elsewhere, monitor_printf() does nothing, while
error_reportf_err() reports to stderr.
Both changed functions are HMP command handlers. These should only
run within an HMP monitor.
Unlike monitor_printf(), error_reportf_err() uses the error whole
instead of just its message obtained with error_get_pretty(). This
avoids suppressing its hint (see commit 50b7b00), but I don't think
the errors touched in this commit can come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-15-git-send-email-armbru@redhat.com>
Not caught by Coccinelle, because we report the error only
conditionally here.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-14-git-send-email-armbru@redhat.com>
Done with this Coccinelle semantic patch
@@
expression FMT, E1, E2;
expression list ARGS;
@@
- error_setg(E1, FMT, ARGS, error_get_pretty(E2));
+ error_propagate(E1, E2);/*###*/
+ error_prepend(E1, FMT/*@@@*/, ARGS);
followed by manual cleanup, first because I can't figure out how to
make Coccinelle transform strings, and second to get rid of now
superfluous error_propagate().
We now use or propagate the original error whole instead of just its
message obtained with error_get_pretty(). This avoids suppressing its
hint (see commit 50b7b00), but I can't see how the errors touched in
this commit could come with hints. It also improves the message
printed with &error_abort when we screw up (see commit 1e9b65b).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Done with this Coccinelle semantic patch
@@
expression FMT, E, S;
expression list ARGS;
@@
- error_report(FMT, ARGS, error_get_pretty(E));
+ error_reportf_err(E, FMT/*@@@*/, ARGS);
(
- error_free(E);
|
exit(S);
|
abort();
)
followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.
We now use the error whole instead of just its message obtained with
error_get_pretty(). This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Prepend the additional information, colon, space to the original
message without enclosing it in parenthesis or quotes, like we do
elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-11-git-send-email-armbru@redhat.com>
Instead of simply propagating an error verbatim, we sometimes want to
add to its message, like this:
frobnicate(arg, &err);
error_setg(errp, "Can't frobnicate %s: %s",
arg, error_get_pretty(err));
error_free(err);
This is suboptimal, because it loses err's hint (if any). Moreover,
when errp is &error_abort or is subsequently propagated to
&error_abort, the abort message points to the place where we last
added to the error, not to the place where it originated.
To avoid these issues, provide means to add to an error's message in
place:
frobnicate(arg, errp);
error_prepend(errp, "Can't frobnicate %s: ", arg);
Likewise, reporting an error like
frobnicate(arg, &err);
error_report("Can't frobnicate %s: %s", arg, error_get_pretty(err));
can lose err's hint. To avoid:
error_reportf_err(err, "Can't frobnicate %s: ", arg);
The next commits will put these functions to use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-10-git-send-email-armbru@redhat.com>
The code looks like it tries to check for both qemu_init_main_loop()
and qemu_get_aio_context() failure in one conditional. In fact,
qemu_get_aio_context() can fail only after qemu_init_main_loop()
failed.
Simplify accordingly: check for qemu_init_main_loop() error directly,
without bothering to improve its error message. Call
qemu_get_aio_context() only when qemu_get_aio_context() succeeded. It
can't fail then, so no need to check.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-9-git-send-email-armbru@redhat.com>
bdrv_snapshot_load_tmp() sets an error and returns -errno on failure.
We report both even though the error message is self-contained. Drop
the redundant strerror().
While there: setting errno right before exit() is pointless, so drop
that, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-8-git-send-email-armbru@redhat.com>
bdrv_create() sets an error and returns -errno on failure. When the
latter is interesting, the error is created with error_setg_errno().
bdrv_append_temp_snapshot() uses the error's message to create a new
one with error_setg_errno(). This adds a strerror() that is either
uninteresting or duplicate. Use error_setg() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-7-git-send-email-armbru@redhat.com>
While there, tighten error_append_hint()'s assertion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-6-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Unlike ad hoc prints, error_report_err() uses the error whole instead
of just its message obtained with error_get_pretty(). This avoids
suppressing its hint (see commit 50b7b00). Example:
$ bld/ivshmem-server -l 42@
Parameter 'shm_size' expects a size
You may use k, M, G or T suffixes for kilobytes, megabytes, gigabytes and terabytes.
The last line is new with this patch.
While there, drop a "cannot parse shm size: " message prefix; it's
redundant, because the error message proper is always of the form
"Parameter 'shm_size' expects ...".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-5-git-send-email-armbru@redhat.com>
Both error_report_err() and monitor_printf() print to the same
destination when monitor_printf() is used correctly, i.e. within an
HMP monitor. Elsewhere, monitor_printf() does nothing, while
error_report_err() reports to stderr.
Most changed functions are HMP command handlers. These should only
run within an HMP monitor. The one exception is bdrv_password_cb(),
which should also only run within an HMP monitor.
Four command handlers prefix the error message with the command name:
balloon, migrate_set_capability, migrate_set_parameter, migrate.
Pointless, drop.
Unlike monitor_printf(), error_report_err() uses the error whole
instead of just its message obtained with error_get_pretty(). This
avoids suppressing its hint (see commit 50b7b00). Example:
(qemu) device_add ivshmem,id=666
Parameter 'id' expects an identifier
Identifiers consist of letters, digits, '-', '.', '_', starting with a letter.
Try "help device_add" for more information
The "Identifiers consist of..." line is new with this patch.
Coccinelle semantic patch:
@@
expression M, E;
@@
- monitor_printf(M, "%s\n", error_get_pretty(E));
- error_free(E);
+ error_report_err(E);
@r1@
expression M, E;
format F;
position p;
@@
- monitor_printf(M, "...%@F@\n", error_get_pretty(E));@p
- error_free(E);
+ error_report_err(E);
@script:python@
p << r1.p;
@@
print "%s:%s:%s: prefix dropped" % (p[0].file, p[0].line, p[0].column)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-4-git-send-email-armbru@redhat.com>
Same Coccinelle semantic patch as in commit 565f65d.
We now use the original error whole instead of just its message
obtained with error_get_pretty(). This avoids suppressing its hint
(see commit 50b7b00), but I don't think the errors touched in this
commit can come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-3-git-send-email-armbru@redhat.com>
Coccinelle semantic patch
@@
expression E;
expression list ARGS;
@@
- errx(E, ARGS);
+ error_report(ARGS);
+ exit(E);
@@
expression E, FMT;
expression list ARGS;
@@
- err(E, FMT, ARGS);
+ error_report(FMT /*": %s"*/, ARGS, strerror(errno));
+ exit(E);
followed by a replace of '"/*": %s"*/' by ' : %s"', because I can't
figure out how to make Coccinelle transform strings.
A few of the error messages touched have trailing newlines. They'll
be stripped later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-2-git-send-email-armbru@redhat.com>
audio_init() should not use hw_error(), because dumping CPU registers
is unhelpful there, and aborting is wrong, because it can be called
called from an audio device's realize() method.
The two uses of hw_error() come from commit 0d9acba:
* When qemu_new_timer() fails. It couldn't fail back then, and it
can't fail now. Drop the unreachable error handling.
* When no_audio_driver can't be initialized. It couldn't fail back
then, and it can't fail now. Replace the error handling by an
assertion.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
isa_bus_irqs(), isa_create() and isa_try_create() call hw_error() when
passed a null bus. Use of hw_error() has always been questionable,
because these are used only during machine initialization, and
printing CPU registers isn't useful there.
Since the previous commit, passing a null bus is a programming error.
Drop the hw_error() and simply let it crash.
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1450354795-31608-12-git-send-email-armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We can have at most one ISA bus. If you try to create another one,
isa_bus_new() complains to stderr and returns null.
isa_bus_new() is called in two contexts, machine's init() and device's
realize() methods. Since complaining to stderr is not proper in the
latter context, convert isa_bus_new() to Error.
Machine's init():
* mips_jazz_init(), called from the init() methods of machines
"magnum" and "pica"
* mips_r4k_init(), the init() method of machine "mips"
* pc_init1() called from the init() methods of non-q35 PC machines
* typhoon_init(), called from clipper_init(), the init() method of
machine "clipper"
These callers always create the first ISA bus, hence isa_bus_new()
can't fail. Simply pass &error_abort.
Device's realize():
* i82378_realize(), of PCI device "i82378"
* ich9_lpc_realize(), of PCI device "ICH9-LPC"
* pci_ebus_realize(), of PCI device "ebus"
* piix3_realize(), of PCI device "pci-piix3", abstract parent of
"PIIX3" and "PIIX3-xen"
* piix4_realize(), of PCI device "PIIX4"
* vt82c686b_realize(), of PCI device "VT82C686B"
Propagate the error. Note that these devices are typically created
only by machine init() methods with qdev_init_nofail() or similar. If
we screwed up and created an ISA bus before that call, we now give up
right away. Before, we'd hobble on, and typically die in
isa_bus_irqs(). Similar if someone finds a way to hot-plug one of
these critters.
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1450370121-5768-11-git-send-email-armbru@redhat.com>
These are "ICH9-LPC" and "ebus".
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1450370121-5768-10-git-send-email-armbru@redhat.com>
platform_bus_map_irq() and platform_bus_map_mmio() use hw_error() to
fail. They run in machine_init_done_notifiers, via
platform_bus_init_notify() and link_sysbus_device(). Printing CPU
registers is not helpful there.
Replace hw_error() by error_report(); exit(1). If these are
programming errors, it should be replaced by an assertion instead.
While there, observe that both functions always return 0, and
link_sysbus_device() ignores the return value. Change them to void.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-9-git-send-email-armbru@redhat.com>
virt_set_gic_version() calls exit(1) when passed an invalid property
value. Property setters are not supposed to do that. Screwed up in
commit b92ad39. Harmless, because the property belongs to a machine.
Set an error object instead.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Since commit 50b7b00, we have error_append_hint() to conveniently
accumulate Error member @hint. error_report_err() prints it with a
newline appended. Consequently, users of error_append_hint() need to
know whether theirs is the final line of the hint to decide whether it
needs a newline. Not a nice interface.
Change error_report_err() to print just the hint, and the (still few)
users of error_append_hint() to add the required newline.
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450370121-5768-7-git-send-email-armbru@redhat.com>
Device realize() methods aren't supposed to call hw_error(), they
should set an error and fail cleanly. Blindly doing that would be
easy enough, but then realize() would fail without undoing its side
effects. Just mark it FIXME for now.
Cc: "Andreas Färber" <andreas.faerber@web.de>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-6-git-send-email-armbru@redhat.com>
Device init() methods aren't supposed to call hw_error(), they should
report the error and fail cleanly. Do that.
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <1450370121-5768-5-git-send-email-armbru@redhat.com>
Device realize() methods aren't supposed to call hw_error(), they
should set an error and fail cleanly. Do that.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1450370121-5768-4-git-send-email-armbru@redhat.com>
Device init() methods aren't supposed to call hw_error(), they should
report the error and fail cleanly. Do that.
The errors are all device misconfiguration. All callers use
qdev_init_nofail(), so this patch merely converts hw_error() crashes
into &error_abort crashes. Improvement, because now it crashes closer
to where the misconfiguration bug would be, and a few more bad
examples of hw_error() use are gone.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1450370121-5768-3-git-send-email-armbru@redhat.com>
Printing CPU registers is not helpful during machine initialization.
Moreover, these are straightforward configuration or "can get
resources" errors, so dumping core isn't appropriate either. Replace
hw_error() by error_report(); exit(1). Matches how we report these
errors in other machine initializations.
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-2-git-send-email-armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1449764955-10741-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones