This allows to easily tag devices as non-migratable,
so any attempt to migrate a virtual machine with the
device in question active will make migration fail.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A host chardev could close just before the guest sends some data to be
written. This will cause an -EPIPE error. This shouldn't be propagated
to virtio-serial-bus.
Ideally we should close the port once -EPIPE is received, but since the
chardev interface doesn't return such meaningful values to its users,
all we get is -1 for any kind of error. Just return 0 for now and wait
for chardevs to return better error messages to act better on the return
messages.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
We were previously allowing arbitrarily-long indirect descriptors, which
could lead to a buffer overflow in qemu-kvm process.
CVE-2011-2212
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost dev stop failed to clear the log field.
Typically not an issue as dev start overwrites this field,
but if logging gets disabled before the following start,
it doesn't so this causes a double free.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The new xen_console protocol changed the default xen_console output device
from whatever Qemu chose to whatever xenstore choses and "pty" as fallback.
This is not how Qemu works. It has its own serial redirection semantics. So
it xenstore doesn't contain information on what to do, Qemu is the place to
ask.
Signed-off-by: Alexander Graf <agraf@suse.de>
Since CS 21994 on xen-unstable.hg and CS
466608f3a32e1f9808acdf832a5843af37e5fcec on qemu-xen-unstable.git, few
changes have been introduced to the PV console xenstore protocol, as
described by the document docs/misc/console.txt under xen-unstable.hg.
From the Qemu point of view, very few modifications are needed to
correctly support the protocol: read from xenstore the "output" node
that tell us what the output of the PV console is going to be.
In case the output is a tty, write to xenstore the device name.
Changes in v2:
- fix error paths: free malloc'ed strings and close the xenstore
connection before returning;
- remove useless snprintf in xenstore_store_pv_console_info if i == 0.
Changes in v3:
- replace xs_daemon_open/xs_daemon_close with xs_open/xs_close.
Changes in v4:
- add a compatibility implementation of xs_open/xs_close.
Changes in v5:
- fix code style.
[agraf] fix build error due to missing stub
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Sometimes the toolstack uses "aio" without an additional format
identifier, in such cases use "raw".
Updated in v2:
- fix code style.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
When disk is a cdrom and the drive is empty the "params" node in
xenstore might be missing completely: cope with it instead of
segfaulting.
Updated in v2:
- actually removed the strchr(blkdev->params, ':') that caused the
segfault;
- free all the allocated strings from xenstore before returning;
Updated in v3:
- set blkdev fields to NULL after free'ing them.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Register the vkbd backend even when running as device emulator for HVM
guests: it is useful because it doesn't need a frequent timer like usb.
Check whether the XenInput DisplayState has been set in the initialise
state, rather than the input state.
In case the DisplayState hasn't been set and there is no vfb for this
domain, then set the XenInput DisplayState to the default one.
Changed in v2:
- use qemu_free instead of free;
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
con_init leaks the string "type", fix it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Xen won't be enabled if there is no backend support available for the
host. And that also means the map cache will work. So drop the separate
config switch and move the required stubs over to xen-stub.c.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This bug was introduced in 94d3f98a3f3caddd7875f9a11776daeb84962a7b:
scsi_cancel_io was checking if some request was pending before trying
to cancel it, while scsi_req_cancel always cancels the request.
This may lead to a crash of Qemu due to dereferencing a NULL pointer,
as exhibited by NetBSD 5.1 installer on MIPS Magnum emulation.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add ich9 controllers, Factor out properties to a separate
struct and reference it to reduce duplication.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To use as a companion controller, use pci-ohci as device and set the
masterbus and num-ports properties, ie:
-device usb-ehci,addr=0b.1,multifunction=on,id=ehci0
-device pci-ohci,addr=0b.0,multifunction=on,masterbus=ehci0.0,num-ports=4
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To use as a companion controller set the masterbus property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The PED bit should only be set for highspeed devices and the PEDC bit
should not be set on "normal" PED bit changes, only on io errors.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
with the "usb-ehci: cleanup port reset handling" patch in place no callers
are calling usb_attach(port, NULL) for a port where port->dev is NULL.
Doing that makes no sense as that causes the port detach op to get called
for a port with nothing attached. Add an assert that port->dev != NULL when
dev == NULL, and remove the check for not having a port->dev in the dev == NULL
case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Doing a usb_attach when dev is NULL will just result in the
port detach op getting called even though nothing was connected in
the first place.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Note this fixes 2 things in one go, first of all the device_destroy bus
op should be a device_detach bus op, as pending async packets from the
device should be cancelled on detach not on destroy.
Secondly having this as a bus op won't work with companion controllers, since
then there will be 1 bus driven by the ehci controller and thus 1 set of bus
ops, but the device being detached may be downstream of a handed over port.
Making the detach of a downstream device a port op allows the ehci controller
to forward this to the companion controller port for handed over ports.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This makes them consistent with the attach and detach ops, and in general
it makes sense to make portops take a port as argument. This also makes
adding support for a companion controller easier / cleaner.
[ kraxel: fix usb-musb.c build ]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is a preparation patch for adding support for USB companion controllers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann