qemu-io and qemu-img already mirror the qemu version string,
time to make qemu-nbd do the same.
Reported-by: 陳培泓 <pahome.chen@mirlab.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170721135047.25005-2-eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
The upstream NBD Protocol has defined a new extension to allow
the server to advertise block sizes to the client, as well as
a way for the client to inform the server whether it intends to
obey block sizes.
When using the block layer as the client, we will obey block
sizes; but when used as 'qemu-nbd -c' to hand off to the
kernel nbd module as the client, we are still waiting for the
kernel to implement a way for us to learn if it will honor
block sizes (perhaps by an addition to sysfs, rather than an
ioctl), as well as any way to tell the kernel what additional
block sizes to obey (NBD_SET_BLKSIZE appears to be accurate
for the minimum size, but preferred and maximum sizes would
probably be new ioctl()s), so until then, we need to make our
request for block sizes conditional.
When using ioctl(NBD_SET_BLKSIZE) to hand off to the kernel,
use the minimum block size as the sector size if it is larger
than 512, which also has the nice effect of cooperating with
(non-qemu) servers that don't do read-modify-write when
exposing a block device with 4k sectors; it might also allow
us to visit a file larger than 2T on a 32-bit kernel.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-10-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD Protocol is introducing some additional information
about exports, such as minimum request size and alignment, as
well as an advertised maximum request size. It will be easier
to feed this information back to the block layer if we gather
all the information into a struct, rather than adding yet more
pointer parameters during negotiation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-2-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu proper has done so for 13 years
(8a7ddc38a6), qemu-img and qemu-io have
done so for four years (526eda14a6).
Ignoring this signal is especially important in qemu-nbd because
otherwise a client can easily take down the qemu-nbd server by dropping
the connection when the server wants to send something, for example:
$ qemu-nbd -x foo -f raw -t null-co:// &
[1] 12726
$ qemu-io -c quit nbd://localhost/bar
can't open device nbd://localhost/bar: No export with name 'bar' available
[1] + 12726 broken pipe qemu-nbd -x foo -f raw -t null-co://
In this case, the client sends an NBD_OPT_ABORT and closes the
connection (because it is not required to wait for a reply), but the
server replies with an NBD_REP_ACK (because it is required to reply).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20170611123714.31292-1-mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Back in qemu 2.5, qemu-nbd was immune to port probes (a transient
server would not quit, regardless of how many probe connections
came and went, until a connection actually negotiated). But we
broke that in commit ee7d7aa when removing the return value to
nbd_client_new(), although that patch also introduced a bug causing
an assertion failure on a client that fails negotiation. We then
made it worse during refactoring in commit 1a6245a (a segfault
before we could even assert); the (masked) assertion was cleaned
up in d3780c2 (still in 2.6), and just recently we finally fixed
the segfault ("nbd: Fully intialize client in case of failed
negotiation"). But that still means that ever since we added
TLS support to qemu-nbd, we have been vulnerable to an ill-timed
port-scan being able to cause a denial of service by taking down
qemu-nbd before a real client has a chance to connect.
Since negotiation is now handled asynchronously via coroutines,
we no longer have a synchronous point of return by re-adding a
return value to nbd_client_new(). So this patch instead wires
things up to pass the negotiation status through the close_fn
callback function.
Simple test across two terminals:
$ qemu-nbd -f raw -p 30001 file
$ nmap 127.0.0.1 -p 30001 && \
qemu-io -c 'r 0 512' -f raw nbd://localhost:30001
Note that this patch does not change what constitutes successful
negotiation (thus, a client must enter transmission phase before
that client can be considered as a reason to terminate the server
when the connection ends). Perhaps we may want to tweak things
in a later patch to also treat a client that uses NBD_OPT_ABORT
as being a 'successful' negotiation (the client correctly talked
the NBD protocol, and informed us it was not going to use our
export after all), but that's a discussion for another day.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170608222617.20376-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a non-NBD client connects to qemu-nbd, we would end up with
a SIGSEGV in nbd_client_put() because we were trying to
unregister the client's association to the export, even though
we skipped inserting the client into that list. Easy trigger
in two terminals:
$ qemu-nbd -p 30001 --format=raw file
$ nmap 127.0.0.1 -p 30001
nmap claims that it thinks it connected to a pago-services1
server (which probably means nmap could be updated to learn the
NBD protocol and give a more accurate diagnosis of the open
port - but that's not our problem), then terminates immediately,
so our call to nbd_negotiate() fails. The fix is to reorder
nbd_co_client_start() to ensure that all initialization occurs
before we ever try talking to a client in nbd_negotiate(), so
that the teardown sequence on negotiation failure doesn't fault
while dereferencing a half-initialized object.
While debugging this, I also noticed that nbd_update_server_watch()
called by nbd_client_closed() was still adding a channel to accept
the next client, even when the state was no longer RUNNING. That
is fixed by making nbd_can_accept() pay attention to the current
state.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170527030421.28366-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move to modern errp scheme from just LOGging errors.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170526110913.89098-1-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qemu-ga's socket activation support was not obeying the LISTEN_PID
environment variable, which avoids that a process uses a socket-activation
file descriptor meant for its parent.
Mess can for example ensue if a process forks a children before consuming
the socket-activation file descriptor and therefore setting O_CLOEXEC
on it.
Luckily, qemu-nbd also got socket activation code, and its copy does
support LISTEN_PID. Some extra fixups are needed to ensure that the
code can be used for both, but that's what this patch does. The
main change is to replace get_listen_fds's "consume" argument with
the FIRST_SOCKET_ACTIVATION_FD macro from the qemu-nbd code.
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Socket activation (sometimes known as systemd socket activation)
allows an Internet superserver to pass a pre-opened listening socket
to the process, instead of having qemu-nbd open a socket itself. This
is done via the LISTEN_FDS and LISTEN_PID environment variables, and a
standard file descriptor range.
This change partially implements socket activation for qemu-nbd. If
the environment variables are set correctly, then socket activation
will happen automatically, otherwise everything works as before. The
limitation is that LISTEN_FDS must be 1.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20170204100317.32425-2-rjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD protocol allows servers to advertise a human-readable
description alongside an export name during NBD_OPT_LIST. Add
an option to pass through the user's string to the NBD client.
Doing this also makes it easier to test commit 200650d4, which
is the client counterpart of receiving the description.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-2-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using the --fork option, one can make qemu-nbd fork the worker process.
The original process will exit on error of the worker or once the worker
enters the main loop.
Suggested-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove the notion of there being a single global array
of trace events, by introducing a method for registering
groups of events.
The module_call_init() needs to be invoked at the start
of any program that wants to make use of the trace
support. Currently this covers system emulators qemu-nbd,
qemu-img and qemu-io.
[Squashed the following fix from Daniel P. Berrange
<berrange@redhat.com>:
linux-user/bsd-user: initialize trace events subsystem
The bsd-user/linux-user programs make use of the CPU emulation
code and this now requires that the trace events subsystem
is enabled, otherwise it'll crash trying to allocate an empty
trace events bitmap for the CPU object.
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-14-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When --offset is set the apparent device size has to be adjusted
accordingly. Otherwise client may request read/write beyond the file end
which would fail.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Message-Id: <8a31654cb182932db78b95aae1e904fc2bd1c465.1475698895.git.tgolembi@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The builtin NBD server uses its own BlockBackend now instead of reusing
the monitor/guest device one.
This means that it has its own writethrough setting now. The builtin
NBD server always uses writeback caching now regardless of whether the
guest device has WCE enabled. qemu-nbd respects the cache mode given on
the command line.
We still need to keep a reference to the monitor BB because we put an
eject notifier on it, but we don't use it for any I/O.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Rather than asserting that nbdflags is within range, just give
it the correct type to begin with :) nbdflags corresponds to
the per-export portion of NBD Protocol "transmission flags", which
is 16 bits in response to NBD_OPT_EXPORT_NAME and NBD_OPT_GO.
Furthermore, upstream NBD has never passed the global flags to
the kernel via ioctl(NBD_SET_FLAGS) (the ioctl was first
introduced in NBD 2.9.22; then a latent bug in NBD 3.1 actually
tried to OR the global flags with the transmission flags, with
the disaster that the addition of NBD_FLAG_NO_ZEROES in 3.9
caused all earlier NBD 3.x clients to treat every export as
read-only; NBD 3.10 and later intentionally clip things to 16
bits to pass only transmission flags). Qemu should follow suit,
since the current two global flags (NBD_FLAG_FIXED_NEWSTYLE
and NBD_FLAG_NO_ZEROES) have no impact on the kernel's behavior
during transmission.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1469129688-22848-3-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Please note, trace_init_backends() must be called in the final process,
i.e. after daemonization. This is necessary to keep tracing thread in
the proper process.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-6-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The *_to_cpup() functions are not very useful, as they simply do
a pointer dereference and then a *_to_cpu(). Instead use either:
* ld*_*_p(), if the data is at an address that might not be
correctly aligned for the load
* a local dereference and *_to_cpu(), if the pointer is
the correct type and known to be correctly aligned
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1465570836-22211-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In addition to making the code simpler, this will replace the
long error messages:
cannot initialize crypto: Unable to initialize GNUTLS library: [...]
cannot initialize crypto: Unable to initialize gcrypt
with shorter messages:
Unable to initialize GNUTLS library: [...]
Unable to initialize gcrypt
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move it to the actual users. There are still a few includes of
qemu/bswap.h in headers; removing them is left for future work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sector-based blk_read() should die; switch to byte-based
blk_pread() instead.
Add a constant for our magic number 512, to make it obvious
that this size will NOT change even if BDRV_SECTOR_SIZE does,
even though the two happen to be the same for now. Split
assignments from conditionals to keep checkpatch.pl happy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_opts_foreach() runs its callback with the error location set to
the option's location. Any errors the callback reports use the
option's location automatically.
Commit 90998d5 moved the actual error reporting from "inside"
qemu_opts_foreach() to after it. Here's a typical hunk:
if (qemu_opts_foreach(qemu_find_opts("object"),
- object_create,
- object_create_initial, NULL)) {
+ user_creatable_add_opts_foreach,
+ object_create_initial, &err)) {
+ error_report_err(err);
exit(1);
}
Before, object_create() reports from within qemu_opts_foreach(), using
the option's location. Afterwards, we do it after
qemu_opts_foreach(), using whatever location happens to be current
there. Commonly a "none" location.
This is because Error objects don't have location information.
Problematic.
Reproducer:
$ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar
qemu-system-x86_64: Property '.foo' not found
Note no location. This commit restores it:
qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found
Note that the qemu_opts_foreach() bug just fixed could mask the bug
here: if the location it leaves dangling hasn't been clobbered, yet,
it's the correct one.
Reported-by: Eric Blake <eblake@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Paragraph on Error added to commit message]
From time to time qemu-nbd is crashing on the following assert:
assert(state == TERMINATING);
nbd_export_closed
nbd_export_put
main
and the state at the moment of the crash is evaluated to TERMINATE.
During shutdown process of the client the nbd_client_thread thread sends
SIGTERM signal and the main thread calls the nbd_client_closed callback.
If the SIGTERM callback will be executed after change the state to
TERMINATING, then the state will once again be TERMINATE.
To solve the issue, we must change the state to TERMINATE only if the state
is RUNNING. In the other case we are shutting down already.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1460629215-11567-1-git-send-email-den@openvz.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Any programs which call the qcrypto APIs should ensure that
qcrypto_init() has been called before anything else which
can use crypto. Essentially this means right at the start
of the main method before initializing anything else.
This is important because some versions of gnutls/gcrypt
require explicit initialization before use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Tested-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 3d4b2f9c added -x to force qemu-nbd to use new-style
negotiation, but while it documented it in the man page, it
omitted docs in the --help output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1459908128-11925-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Before this patch, blk_new() automatically assigned a name to the new
BlockBackend and considered it referenced by the monitor. This patch
removes the implicit monitor_add_blk() call from blk_new() (and
consequently the monitor_remove_blk() call from blk_delete(), too) and
thus blk_new() (and related functions) no longer take a BB name
argument.
In fact, there is only a single point where blk_new()/blk_new_open() is
called and the new BB is monitor-owned, and that is in blockdev_init().
Besides thus relieving us from having to invent names for all of the BBs
we use in qemu-img, this fixes a bug where qemu cannot create a new
image if there already is a monitor-owned BB named "image".
If a BB and its BDS tree are created in a single operation, as of this
patch the BDS tree will be created before the BB is given a name
(whereas it was the other way around before). This results in minor
change to the output of iotest 087, whose reference output is amended
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An upcoming patch will alter how simple unions, like SocketAddress,
are laid out, which will impact all lines of the form 'addr->u.XXX'
(expanding it to the longer 'addr->u.XXX.data'). For better
legibility in that patch, and less need for line wrapping, it's better
to use a temporary variable to reduce the effect of a layout change to
just the variable initializations, rather than every reference within
a SocketAddress. Also, take advantage of some C99 initialization where
it makes sense (simplifying g_new0() to g_new()).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
When declaring the 'struct option' array, use the standard
constants no_argument/required_argument, instead of magic
values 0 and 1.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When defining values for long options, the normal practice is
to start numbering from 256, to avoid overlap with the range
of valid values for short options.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently qemu-nbd allows an image filename to be passed on the
command line, but unless using the JSON format, it does not have
a way to set any options except the format eg
qemu-nbd https://127.0.0.1/images/centos7.iso
qemu-nbd /home/berrange/demo.qcow2
This adds a --image-opts arg that indicates that the positional
filename should be interpreted as a full option string, not
just a filename.
qemu-nbd --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off
qemu-nbd --image-opts driver=file,filename=/home/berrange/demo.qcow2
This flag is mutually exclusive with the '-f' flag.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This modifies the qemu-nbd program so that it is possible to
request the use of TLS with the server. It simply adds a new
command line option --tls-creds which is used to provide the
ID of a QCryptoTLSCreds object previously created via the
--object command line option.
For example
qemu-nbd --object tls-creds-x509,id=tls0,endpoint=server,\
dir=/home/berrange/security/qemutls \
--tls-creds tls0 \
--exportname default
TLS requires the new style NBD protocol, so if no export name
is set (via --export-name), then we use the default NBD protocol
export name ""
TLS is only supported when using an IPv4/IPv6 socket listener.
It is not possible to use with UNIX sockets, which includes
when connecting the NBD server to a host device.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-16-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This extends the NBD protocol handling code so that it is capable
of negotiating TLS support during the connection setup. This involves
requesting the STARTTLS protocol option before any other NBD options.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-14-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu-nbd server currently always uses the old style protocol
since it never sets any export name. This is a problem because
future TLS support will require use of the new style protocol
negotiation.
This adds "--exportname NAME" / "-x NAME" arguments to qemu-nbd
which allow the user to set an explicit export name. When an
export name is set the server will always use the new style
NBD protocol.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-11-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all callers are converted to use I/O channels for
initial connection setup, it is possible to switch the core
NBD protocol handling core over to use QIOChannel APIs for
actual sockets I/O.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-7-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This converts the qemu-nbd server to use the QIOChannelSocket
class for initial listener socket setup and accepting of client
connections. Actual I/O is still being performed against the
socket file descriptor using the POSIX socket APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-5-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow creation of user creatable object types with qemu-nbd
via a new --object command line arg. This will be used to supply
passwords and/or encryption keys to the various block driver
backends via the recently added 'secret' object type.
# printf letmein > mypasswd.txt
# qemu-nbd --object secret,id=sec0,file=mypasswd.txt \
...other nbd args...
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
Rename the parameter "close" to "close_fn" to disambiguous with
close(2).
This unifies error handling paths of NBDClient allocation:
nbd_client_new will shutdown the socket and call the "close_fn" callback
if negotiation failed, so the caller don't need a different path than
the normal close.
The returned pointer is never used, make it void in preparation for the
next patch.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1452760863-25350-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The arguments of error_report() should yield a short error string
without newlines.
A few places try to print additional help after the error message by
embedding newlines in the error string. That's nice, but let's do it
the right way. Commit 474c213 cleaned up some, but they keep coming
back. Offenders tracked down with the Coccinelle semantic patch from
commit 312fd5f.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back. Tracked down with the Coccinelle semantic patch
from commit 312fd5f.
Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
Just three instances left.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-16-git-send-email-armbru@redhat.com>
Done with this Coccinelle semantic patch
@@
expression FMT, E, S;
expression list ARGS;
@@
- error_report(FMT, ARGS, error_get_pretty(E));
+ error_reportf_err(E, FMT/*@@@*/, ARGS);
(
- error_free(E);
|
exit(S);
|
abort();
)
followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.
We now use the error whole instead of just its message obtained with
error_get_pretty(). This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_snapshot_load_tmp() sets an error and returns -errno on failure.
We report both even though the error message is self-contained. Drop
the redundant strerror().
While there: setting errno right before exit() is pointless, so drop
that, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-8-git-send-email-armbru@redhat.com>
Eric Blake