Provide a helper to be used by shared waker functions to request
shared pages from the source.
The last_rb pointer is moved into the incoming state since this
helper can update it as well as the main fault thread function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Utility for testing the map when you already know the offset
in the RAMBlock.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notify the vhost-user slave on reception of the 'postcopy-listen'
event from the source.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow other userfaultfd's to be registered into the fault thread
so that handlers for shared memory can get responses.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wire up a notifier to send a VHOST_USER_POSTCOPY_ADVISE
message on an incoming advise.
Later patches will fill in the behaviour/contents of the
message.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a notifier chain for postcopy with a 'reason' flag
and an opportunity for a notifier member to return an error.
Call it when enabling postcopy.
This will initially used to enable devices to declare they're unable
to postcopy and later to notify of devices of stages within postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use a flag on the RAMBlock to state whether it has the
UFFDIO_ZEROPAGE capability, use it when it's available.
This allows the use of postcopy on tmpfs as well as hugepage
backed files.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When setting migration capabilities via QMP/HMP, we'll apply them even
if the capability check failed. Fix it.
Fixes: 4a84214ebe ("migration: provide migrate_caps_check()", 2017-07-18)
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180305094938.31374-1-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
this actually limits (as the original commit mesage suggests) the
number of I/O buffers that can be allocated and not the number
of parallel (inflight) I/O requests.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1520507908-16743-4-git-send-email-pl@kamp.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reset the dirty bitmap before reading to make sure we don't miss
any new data.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1520507908-16743-3-git-send-email-pl@kamp.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
this patch makes the bulk phase of a block migration to take
place before we start transferring ram. As the bulk block migration
can take a long time its pointless to transfer ram during that phase.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <1520507908-16743-2-git-send-email-pl@kamp.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Spotted thanks to ASAN:
QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 tests/migration-test -p /x86_64/migration/bad_dest
==30302==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7f60efba1a38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
#1 0x7f60eef3cf75 in g_malloc0 ../glib/gmem.c:124
#2 0x55ca9094702c in error_copy /home/elmarco/src/qemu/util/error.c:203
#3 0x55ca9037a30f in migrate_set_error /home/elmarco/src/qemu/migration/migration.c:1139
#4 0x55ca9037a462 in migrate_fd_error /home/elmarco/src/qemu/migration/migration.c:1150
#5 0x55ca9038162b in migrate_fd_connect /home/elmarco/src/qemu/migration/migration.c:2411
#6 0x55ca90386e41 in migration_channel_connect /home/elmarco/src/qemu/migration/channel.c:81
#7 0x55ca9038335e in socket_outgoing_migration /home/elmarco/src/qemu/migration/socket.c:85
#8 0x55ca9083dd3a in qio_task_complete /home/elmarco/src/qemu/io/task.c:142
#9 0x55ca9083d6cc in gio_task_thread_result /home/elmarco/src/qemu/io/task.c:88
#10 0x7f60eef37317 in g_idle_dispatch ../glib/gmain.c:5552
#11 0x7f60eef3490b in g_main_dispatch ../glib/gmain.c:3182
#12 0x7f60eef357ac in g_main_context_dispatch ../glib/gmain.c:3847
#13 0x55ca90927231 in glib_pollfds_poll /home/elmarco/src/qemu/util/main-loop.c:214
#14 0x55ca90927420 in os_host_main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:261
#15 0x55ca909275fa in main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:515
#16 0x55ca8fc1c2a4 in main_loop /home/elmarco/src/qemu/vl.c:1942
#17 0x55ca8fc2eb3a in main /home/elmarco/src/qemu/vl.c:4724
#18 0x7f60e4082009 in __libc_start_main (/lib64/libc.so.6+0x21009)
Indirect leak of 45 byte(s) in 1 object(s) allocated from:
#0 0x7f60efba1850 in malloc (/lib64/libasan.so.4+0xde850)
#1 0x7f60eef3cf0c in g_malloc ../glib/gmem.c:94
#2 0x7f60eef3d1cf in g_malloc_n ../glib/gmem.c:331
#3 0x7f60eef596eb in g_strdup ../glib/gstrfuncs.c:363
#4 0x55ca90947085 in error_copy /home/elmarco/src/qemu/util/error.c:204
#5 0x55ca9037a30f in migrate_set_error /home/elmarco/src/qemu/migration/migration.c:1139
#6 0x55ca9037a462 in migrate_fd_error /home/elmarco/src/qemu/migration/migration.c:1150
#7 0x55ca9038162b in migrate_fd_connect /home/elmarco/src/qemu/migration/migration.c:2411
#8 0x55ca90386e41 in migration_channel_connect /home/elmarco/src/qemu/migration/channel.c:81
#9 0x55ca9038335e in socket_outgoing_migration /home/elmarco/src/qemu/migration/socket.c:85
#10 0x55ca9083dd3a in qio_task_complete /home/elmarco/src/qemu/io/task.c:142
#11 0x55ca9083d6cc in gio_task_thread_result /home/elmarco/src/qemu/io/task.c:88
#12 0x7f60eef37317 in g_idle_dispatch ../glib/gmain.c:5552
#13 0x7f60eef3490b in g_main_dispatch ../glib/gmain.c:3182
#14 0x7f60eef357ac in g_main_context_dispatch ../glib/gmain.c:3847
#15 0x55ca90927231 in glib_pollfds_poll /home/elmarco/src/qemu/util/main-loop.c:214
#16 0x55ca90927420 in os_host_main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:261
#17 0x55ca909275fa in main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:515
#18 0x55ca8fc1c2a4 in main_loop /home/elmarco/src/qemu/vl.c:1942
#19 0x55ca8fc2eb3a in main /home/elmarco/src/qemu/vl.c:4724
#20 0x7f60e4082009 in __libc_start_main (/lib64/libc.so.6+0x21009)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180306170959.3921-1-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A new parameter "context" is added to qio_channel_tls_handshake() is to
allow the TLS to be run on a non-default context. Still, no functional
change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We have worked on qio_task_run_in_thread() already. Further, let
all the qio channel APIs use that context.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Let the callers take the object, then pass it to migrate_init().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-12-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We will not allow failures to happen when sending data from destination
to source via the return path. However it is possible that there can be
errors along the way. This patch allows the migrate_send_rp_message()
to return error when it happens, and further extended it to
migrate_send_rp_req_pages().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-9-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A general helper to notify the fault thread.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-4-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It was only used for quitting the page fault thread before. Let it be
something more useful - now we can use it to notify a "wake" for the
page fault thread (for any reason), and it only means "quit" if the
fault_thread_quit is set.
Since we changed what it does, renaming it to userfault_event_fd.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the postcopy down due to some reason, we can always see this on dst:
qemu-system-x86_64: RP: Received invalid message 0x0000 length 0x0000
However in most cases that's not the real issue. The problem is that
qemu_get_be16() has no way to show whether the returned data is valid or
not, and we are _always_ assuming it is valid. That's possibly not wise.
The best approach to solve this would be: refactoring QEMUFile interface
to allow the APIs to return error if there is. However it needs quite a
bit of work and testing. For now, let's explicitly check the validity
first before using the data in all places for qemu_get_*().
This patch tries to fix most of the cases I can see. Only if we are with
this, can we make sure we are processing the valid data, and also can we
make sure we can capture the channel down events correctly.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Avoid crash in cleanup after a very early migration failure
(possibly due to my 688a3dcba9 'Route errors down ...')
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180212160340.15333-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
QEMUFile uses buffered IO so when writing small amounts (such as the Xen
device state file), the actual write call and any errors that may occur
only happen as part of qemu_fclose(). Therefore, report IO errors when
saving the device state under Xen by checking the return value of
qemu_fclose().
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Message-Id: <20180206163039.23661-1-ross.lagerwall@citrix.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
The macro expansions of qdict_put_TYPE() and qlist_append_TYPE() need
qbool.h, qnull.h, qnum.h and qstring.h to compile. We include qnull.h
and qnum.h in the headers, but not qbool.h and qstring.h. Works,
because we include those wherever the macros get used.
Open-coding these helpers is of dubious value. Turn them into
functions and drop the includes from the headers.
This cleanup makes the number of objects depending on qapi/qmp/qnum.h
from 4551 (out of 4743) to 46 in my "build everything" tree. For
qapi/qmp/qnull.h, the number drops from 4552 to 21.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-10-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-4-armbru@redhat.com>
If postcopy-ram was set on the source but not on the destination,
migration doesn't occur, the destination prints an error and boots
the guest:
qemu-system-ppc64: Expected vmdescription section, but got 0
We end up with two running instances.
This behaviour was introduced in 2.11 by commit 58110f0acb "migration:
split common postcopy out of ram postcopy" to prepare ground for the
upcoming dirty bitmap postcopy support. It adds a new case where the
source may send an empty postcopy advise because dirty bitmap doesn't
need to check page sizes like RAM postcopy does.
If the source has enabled postcopy-ram, then it sends an advise with
the page size values. If the destination hasn't enabled postcopy-ram,
then loadvm_postcopy_handle_advise() leaves the page size values on
the stream and returns. This confuses qemu_loadvm_state() later on
and causes the destination to start execution.
As discussed several times, postcopy-ram should be enabled both sides
to be functional. This patch changes the destination to perform some
extra checks on the advise length to ensure this is the case. Otherwise
an error is returned and migration is aborted.
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <151791621042.19120.3103118434734245776.stgit@bahia>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since qemu_fopen_channel_{in,out}put take references on the underlying
IO channels, make sure to release our references to them.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Message-Id: <20171101142526.1006-2-ross.lagerwall@citrix.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In e91d895 I added the new pause-before-switchover mechanism
to allow migration completion to be delayed; this changes the
last state prior to completion to MIGRATE_STATUS_DEVICE rather
than MIGRATE_STATUS_ACTIVE.
Fix the failure path in migration_completion to recover the block
devices if it fails in MIGRATE_STATUS_DEVICE, not just the
MIGRATE_STATUS_ACTIVE that it previously had.
This corresponds to rh bz:
https://bugzilla.redhat.com/show_bug.cgi?id=1538494
whose symptom is an occasional source crash on a failed migration.
Fixes: e91d8951d5
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It already has RAMBlock and offset, it can calculate it itself.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: b15df1ae50 ("migration: cleanup stats update into function")
The threshold size is changed to be recorded in s->threshold_size.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MAX_VM_CMD_PACKAGED_SIZE is a constant used in qemu_savevm_send_packaged
and loadvm_handle_cmd_packaged to determine whether a package is too
big to be sent or received. qemu_savevm_send_packaged is called inside
postcopy_start (migration/migration.c) to send the MigrationState
in a single blob to the destination, using the MIG_CMD_PACKAGED subcommand,
which will read it up using loadvm_handle_cmd_packaged. If the blob is
larger than MAX_VM_CMD_PACKAGED_SIZE, an error is thrown and the postcopy
migration is aborted. Both MAX_VM_CMD_PACKAGED_SIZE and MIG_CMD_PACKAGED
were introduced by commit 11cf1d984b ("MIG_CMD_PACKAGED: Send a packaged
chunk ..."). The constant has its original value of 1ul << 24 (16MB).
The current MAX_VM_CMD_PACKAGED_SIZE value is not enough to support postcopy
migration of bigger pseries guests. The blob size for a postcopy migration of
a pseries guest with the following setup:
qemu-system-ppc64 --nographic -vga none -machine pseries,accel=kvm -m 64G \
-smp 1,maxcpus=32 -device virtio-blk-pci,drive=rootdisk \
-drive file=f27.qcow2,if=none,cache=none,format=qcow2,id=rootdisk \
-netdev user,id=u1 -net nic,netdev=u1
Goes around 12MB. Bumping the RAM to 128G makes the blob sizes goes to 20MB.
With 256G the blob goes to 37MB - more than twice the current maximum size.
At this moment the pseries machine can handle guests with up to 1TB of RAM,
making this postcopy blob goes to 128MB of size approximately.
Following the discussions made in [1], there is a need to understand what
devices are aggressively consuming the blob in that manner and see if that
can be mitigated. Until then, we can set MAX_VM_CMD_PACKAGED_SIZE to the
maximum value allowed. Since the size is a 32 bit int variable, we can set
it as 1ul << 32, giving a maximum blob size of 4G that is enough to support
postcopy migration of 32TB RAM guests given the above constraints.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2018-01/msg06313.html
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Route async errors (especially from sockets) down through
migration_channel_connect and on to migrate_fd_connect where they
can be cleaned up.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Allow whatever is performing the connection to pass migrate_fd_connect
an error to indicate there was a problem during connection, an allow
us to clean up.
The caller must free the error.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
laying on the mailing list for a while, but apparently no
maintainer feels really responsible for picking up.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJaZcaYAAoJEC7Z13T+cC21ab0P/3fE52pp0BEWRfM3MkTyJCgs
c3ZDR2raLsrwl5MMoeV6TCZ8ILp3RR5ipdnpsxAlUKi0e953hduFXJ/A9meElogu
i1BdCl7SBYUWXg9WKqH5cX9LGiGiRLQ53KehCB6wa4nXBjkL1bGtbprbp5kCb+Sn
tavBoIqkwxC2VvqJHL23uS7n/3bPkr4XA1bA/VWezm7be6f5bEqBzORdxPabRC3f
M7b1ntl2Xj9PXpwKZkHgET8Wg1Ne5kCUvvx9o22iMuHhBHsxAmMc06Q96wihDUI3
/CwzaErGrykGRX95y++yaBMUEYMSk90dv9cXHTMryDw/0id0OMnpcGm6SeQHlcQT
ATrhnH1VzEcgGJPYpqKxNvb0pJZ7t7gYUSi0HMC83PG2S9wD/kBvtB8rqumTolKB
cvI6l7PFfCZIr3FsTyGHX1KVRHX8PWljnKIvAbyUEuK4XDnSX7hT+7jQvuxj4HSZ
/ZlksnSIHcUf5gx6zG2StVKo5TEnY6JUhf8CuQeILW0ZGj6V/aUFbR5aMmgVinyj
p/2OOUsze6rYCcpVE2kI7hSMrSXk4QfvPyIvjGf86EVxTM4SK03bP4QVFwtZtFzA
HXXFIgKNcE7I7BhghC6PLcmHaYBiK8A5EIvXpgi4tD7L3PFLos6wtR6T2ze3mBn2
JyKxGw9rExlAJMi5/WE9
=JCAM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth/tags/pull-request-2018-01-22' into staging
Pull request for various patches that have been reviewed and
laying on the mailing list for a while, but apparently no
maintainer feels really responsible for picking up.
# gpg: Signature made Mon 22 Jan 2018 11:10:16 GMT
# gpg: using RSA key 0x2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth/tags/pull-request-2018-01-22:
hw/isa: Replace fprintf(stderr, "*\n" with error_report()
hw/ipmi: Replace fprintf(stderr, "*\n" with error_report()
hw/bt: Replace fprintf(stderr, "*\n" with error_report()
Fixes after renaming __FUNCTION__ to __func__
Replace all occurances of __FUNCTION__ with __func__
tests/cpu-plug-test: Test CPU hot-plugging on s390x
tests/cpu-plug-test: Check CPU hot-plugging on ppc64, too
tests/cpu-plug-test: Check the CPU hot-plugging with device_add, too
tests: Rename pc-cpu-test.c to cpu-plug-test.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commits
ca6011c migration: add postcopy total blocktime into query-migrate
5f32dc8 migration: add blocktime calculation into migration-test
2f7dae9 migration: postcopy_blocktime documentation
3be98be migration: calculate vCPU blocktime on dst side
01a87f0 migration: add postcopy blocktime ctx into MigrationIncomingState
31bf06a migration: introduce postcopy-blocktime capability
as they don't build on ppc32 due to trying to do atomic accesses
on types that are larger than the host pointer type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.
One line in hcd-musb.c was manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'. Although our coding style frowns on brace-less 'if':
if (cond)
statement;
else
something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'. But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'. Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.
The change should have no semantic impact. I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.
Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is already called in migrate_fd_cleanup.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Keep the one in migrate_fd_cleanup() would be enough. Removing the other
two.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch only moved the last part of migration_thread() into a new
function migration_iteration_finish() to make it much shorter. With
previous works to remove some local variables, now it's fairly easy to
do that.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The major work for migration iterations are to move RAM/block/... data
via qemu_savevm_state_iterate(). Generalize those part into a single
function.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We have quite a few lines in migration_thread() that calculates some
statistics for the migration interations. Isolate it into a single
function to improve readability.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It converts the old if clauses into switch, explicitly mentions the
possible migration states. The old nested "if"s are not clear on what
we do on different states.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Generalize the calculation part when migration complete into a
function to simplify migration_thread().
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce MigrationState.downtime_start to replace the local variable
"start_time" in migration_thread to avoid passing things around.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Firstly, it was passed around. Let's just move it into MigrationState
just like many other variables as state of migration, renaming it to
vm_was_running.
One thing to mention is that for postcopy, we actually don't need this
knowledge at all since postcopy can't resume a VM even if it fails (we
can see that from the old code too: when we try to resume we also check
against "entered_postcopy" variable). So further we do this:
- in postcopy_start(), we don't update vm_old_running since useless
- in migration_thread(), we don't need to check entered_postcopy when
resume, since it's only used for precopy.
Comment this out too for that variable definition.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Michael S. Tsirkin