"EMU" actually is "Emulex Corporation", so not a good idea to use that
by default. Lets use the Red Hat vendor id instead, which is in line
with the pci ids which are allocated from Red Hat vendor ids too.
Vendor list is available from http://www.uefi.org/pnp_id_list
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181005091934.12143-1-kraxel@redhat.com
If QEMU is compiled with clang-7 it results in the warning:
hw/display/qxl.c:1884:19: error: misaligned or large atomic operation
may incur significant performance penalty [-Werror,-Watomic-alignment]
old_pending = atomic_fetch_or(&d->ram->int_pending, le_events);
^
This is because the Spice headers forgot to define the QXLRam struct
with the '__aligned__(4)' attribute. clang 7 and newer will thus
warn that the access here to int_pending might not be 4-aligned
(because the QXLRam object d->ram points at might start at a
misaligned address). In fact we set up d->ram in init_qxl_ram() so
it always starts at a 4K boundary, so we know the atomic access here
is OK.
Newer Spice versions (with Spice commit
beda5ec7a6848be20c0cac2a9a8ef2a41e8069c1) will fix the bug;
for older Spice versions, work around it by telling the compiler
explicitly that the alignment is OK using __builtin_assume_aligned().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180927155538.699-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit bc37b06a5 added NBD_CMD_CACHE support, but used the wrong value
for NBD_FLAG_SEND_CACHE flag for negotiation. That commit picked bit 8,
which had already been assigned by the NBD specification to mean
NBD_FLAG_CAN_MULTI_CONN, and which was already implemented in the
Linux kernel as a part of stable userspace-kernel API since 4.10:
"bit 8, NBD_FLAG_CAN_MULTI_CONN: Indicates that the server operates
entirely without cache, or that the cache it uses is shared among all
connections to the given device. In particular, if this flag is
present, then the effects of NBD_CMD_FLUSH and NBD_CMD_FLAG_FUA
MUST be visible across all connections when the server sends its reply
to that command to the client. In the absense of this flag, clients
SHOULD NOT multiplex their commands over more than one connection to
the export.
...
bit 10, NBD_FLAG_SEND_CACHE: documents that the server understands
NBD_CMD_CACHE; however, note that server implementations exist
which support the command without advertising this bit, and
conversely that this bit does not guarantee that the command will
succeed or have an impact."
Consequences:
- a client trying to use NBD_CMD_CACHE per the NBD spec will not
see the feature as available from a qemu 3.0 server (not fatal,
clients already have to be prepared for caching to not exist)
- a client accidentally coded to the qemu 3.0 bit value instead
of following the spec may interpret NBD_CMD_CACHE as being available
when it is not (probably not fatal, the spec says the server should
gracefully fail unknown commands, and that clients of NBD_CMD_CACHE
should be prepared for failure even when the feature is advertised);
such clients are unlikely (perhaps only in unreleased Virtuozzo code),
and will disappear over time
- a client prepared to use multiple connections based on
NBD_FLAG_CAN_MULTI_CONN may cause data corruption when it assumes
that caching is consistent when in reality qemu 3.0 did not have
a consistent cache. Partially mitigated by using read-only
connections (where nothing needs to be flushed, so caching is
indeed consistent) or when using qemu-nbd with the default -e 1
(at most one client at a time); visible only when using -e 2 or
more for a writable export.
Thus the commit fixes negotiation flag in QEMU according to the
specification.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
CC: Valery Vdovin <valery.vdovin@acronis.com>
CC: Eric Blake <eblake@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: qemu-stable@nongnu.org
Message-Id: <20181004100313.4253-1-den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: enhance commit message, add defines for unimplemented flags]
Signed-off-by: Eric Blake <eblake@redhat.com>
As the kernel has no way of disallowing the start of a huge page
backed VM, we can migrate a running huge backed VM to a host that has
no huge page KVM support.
Let's glue huge page support support to the 3.1 machine, so we do not
migrate to a destination host that doesn't have QEMU huge page support
and can stop migration if KVM doesn't indicate support.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20180928093435.198573-1-frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
struct SubchDev embeds several other structures which are marked with
QEMU_PACKED. This causes the compiler to not care for proper alignment
of these structures. When we later pass around pointers to the unaligned
struct members during migration, this causes problems on host architectures
like Sparc that can not do unaligned memory access.
Most of the structs in ioinst.h are naturally aligned, so we can fix
most of the problem by removing the QEMU_PACKED statements (and use
QEMU_BUILD_BUG_MSG() statements instead to make sure that there is no
padding). However, for the struct SCHIB, we have to keep the QEMU_PACKED
since the compiler adds some padding here otherwise. Move this struct
to the beginning of struct SubchDev instead to fix the alignment problem
here, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538036615-32542-4-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The uint16_t member cu_type of struct SenseId is not naturally aligned,
and since the struct is marked with QEMU_PACKED, this can lead to
unaligned memory accesses - which does not work on architectures like
Sparc. Thus remove the QEMU_PACKED here and rather copy the struct
byte by byte when we do copy_sense_id_to_guest().
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538036615-32542-3-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
After the previous commit, nbd_client_new's first parameter is always
NULL. Let's drop it with all corresponding old-style negotiation code
path which is unreachable now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181003170228.95973-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: re-wrap short line]
Signed-off-by: Eric Blake <eblake@redhat.com>
This is mostly for readability of the code. Let's make it clear which
callers can create an implicit monitor when the chardev is muxed.
This will also enforce a safer behaviour, as we don't really support
creating monitor anywhere/anytime at the moment. Add an assert() to
make sure the programmer explicitely wanted that behaviour.
There are documented cases, such as: -serial/-parallel/-virtioconsole
and to less extent -debugcon.
Less obvious and questionable ones are -gdb, SLIRP -guestfwd and Xen
console. Add a FIXME note for those, but keep the support for now.
Other qemu_chr_new() callers either have a fixed parameter/filename
string or do not need it, such as -qtest:
* qtest.c: qtest_init()
Afaik, only used by tests/libqtest.c, without mux. I don't think we
support it outside of qemu testing: drop support for implicit mux
monitor (qemu_chr_new() call: no implicit mux now).
* hw/
All with literal @filename argument that doesn't enable mux monitor.
* tests/
All with @filename argument that doesn't enable mux monitor.
On a related note, the list of monitor creation places:
- the chardev creators listed above: all from command line (except
perhaps Xen console?)
- -gdb & hmp gdbserver will create a "GDB monitor command" chardev
that is wired to an HMP monitor.
- -mon command line option
From this short study, I would like to think that a monitor may only
be created in the main thread today, though I remain skeptical :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Fix up conformance to GTK-Doc function comment style, as documented in
https://developer.gnome.org/gtk-doc-manual/stable/documenting_symbols.html.en
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Now that all the users of old_mmio MemoryRegion accessors
have been converted, we can remove the core code support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180824170422.5783-2-peter.maydell@linaro.org>
Based-on: <20180802174042.29234-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before this change, memory-backend-file object is valid for Linux hosts
only because hostmem-file.c is compiled only on Linux hosts.
However, other POSIX-based hosts (such as macOS) can support
memory-backend-file object in the same way as on Linux hosts.
This patch makes hostmem-file.c and related functions to be compiled on
all POSIX-based hosts to make available memory-backend-file on them.
Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com>
Message-Id: <20180924123205.29651-1-hikarupsp@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch moves definitions of Windows dump structures to
include/qemu/win_dump_defs.h to keep create_win_dump() prototype separate.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Message-Id: <1535546488-30208-2-git-send-email-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Slirp and VNC modules use virtual clock for processing some events that
are related to the guest execution speed.
But virtual clock-related events are consideres to be deterministic and
are recorded/replayed by icount mechanism. But slirp and VNC lie outside
the recorded guest core (which includes CPU and peripherals).
Therefore slirp and VNC are external for the guest, but should work at
guest speed.
This patch introduces new virtual clock which can be used for external
subsystems for running timers that are synchronized with the guest.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180912082002.3228.82417.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In record/replay icount mode vCPU thread and iothread synchronize
the execution using the checkpoints.
vCPU thread processes the virtual timers and iothread processes all others.
When iothread wants to wake up sleeping vCPU thread, it sends dummy queued
work. Therefore it could be the following sequence of the events in
record mode:
- IO: sending dummy work
- IO: processing timers
- CPU: wakeup
- CPU: clearing dummy work
- CPU: processing virtual timers
But due to the races in replay mode the sequence may change:
- IO: sending dummy work
- CPU: wakeup
- CPU: clearing dummy work
- CPU: sleeping again because nothing to do
- IO: Processing timers
- CPU: zzzz
In this case vCPU will not wake up, because dummy work is not to be set up
again.
This patch tries to wake up the vCPU when it sleeps and the icount warp
checkpoint isn't met. It means that vCPU has something to do, because
there are no other reasons of non-matching warp checkpoint.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
--
v5: improve checking that vCPU is still sleeping
Message-Id: <20180912081945.3228.19776.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously, if the size of initrd >=2G, qemu exits with error:
root@haswell-OptiPlex-9020:/home/lizj# /home/lizhijian/lkp/qemu-colo/x86_64-softmmu/qemu-system-x86_64 -kernel ./vmlinuz-4.16.0-rc4 -initrd large.cgz -nographic
qemu: error reading initrd large.cgz: No such file or directory
root@haswell-OptiPlex-9020:/home/lizj# du -sh large.cgz
2.5G large.cgz
this patch changes the caller side that use this function to calculate
size of initrd file as well.
v2: update error message and int64_t printing format
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <1536833233-14121-1-git-send-email-lizhijian@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run some memfd-related checks before registering hostmem-memfd &
various properties. This will help libvirt to figure out what the host
is supposed to be capable of.
qemu_memfd_check() is changed to a less optimized version, since it is
used with various flags, it no longer caches the result.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180906161415.8543-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This introduces read/set accessors for int64_t and uint64_t.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180910232752.31565-3-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180903171831.15446-4-cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity does not see anymore that qemu_mutex_lock is taking a lock.
Hide all the QSP magic so that static analysis works again.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- qcow2 cache option default changes (Linux: 32 MB maximum, limited by
whatever cache size can be made use of with the specific image;
default cache-clean-interval of 10 minutes)
- reopen: Allow specifying unchanged child node references, and changing
a few generic options (discard, detect-zeroes)
- Fix werror/rerror defaults for -device drive=<node-name>
- Test case fixes
-----BEGIN PGP SIGNATURE-----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=ai81
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2 cache option default changes (Linux: 32 MB maximum, limited by
whatever cache size can be made use of with the specific image;
default cache-clean-interval of 10 minutes)
- reopen: Allow specifying unchanged child node references, and changing
a few generic options (discard, detect-zeroes)
- Fix werror/rerror defaults for -device drive=<node-name>
- Test case fixes
# gpg: Signature made Mon 01 Oct 2018 18:17:35 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (23 commits)
tests/test-bdrv-drain: Fix too late qemu_event_reset()
test-replication: Lock AioContext around blk_unref()
qcow2: Fix cache-clean-interval documentation
block-backend: Set werror/rerror defaults in blk_new()
qcow2: Explicit number replaced by a constant
qcow2: Set the default cache-clean-interval to 10 minutes
qcow2: Resize the cache upon image resizing
qcow2: Increase the default upper limit on the L2 cache size
qcow2: Assign the L2 cache relatively to the image size
qcow2: Avoid duplication in setting the refcount cache size
qcow2: Make sizes more humanly readable
include: Add a lookup table of sizes
qcow2: Options' documentation fixes
block: Allow changing 'detect-zeroes' on reopen
block: Allow changing 'discard' on reopen
file-posix: Forbid trying to change unsupported options during reopen
block: Forbid trying to change unsupported options during reopen
block: Allow child references on reopen
block: Don't look for child references in append_open_options()
block: Remove child references from bs->{options,explicit_options}
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adding a lookup table for the powers of two, with the appropriate size
prefixes. This is needed when a size has to be stringified, in which
case something like '(1 * KiB)' would become a literal '(1 * (1L << 10))'
string. Powers of two are used very often for sizes, so such a table
will also make it easier and more intuitive to write them.
This table is generatred using the following AWK script:
BEGIN {
suffix="KMGTPE";
for(i=10; i<64; i++) {
val=2**i;
s=substr(suffix, int(i/10), 1);
n=2**(i%10);
pad=21-int(log(n)/log(10));
printf("#define S_%d%siB %*d\n", n, s, pad, val);
}
}
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'detect-zeroes' is one of the basic BlockdevOptions available for all
drivers, but it's not handled by bdrv_reopen_prepare(), so any attempt
to change it results in an error:
(qemu) qemu-io virtio0 "reopen -o detect-zeroes=on"
Cannot change the option 'detect-zeroes'
Since there's no reason why we shouldn't allow changing it and the
implementation is simple let's just do it.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Create a io region for an EDID data block.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180925075646.25114-4-kraxel@redhat.com
Helper function to figure the size of a edid blob, by checking how many
extensions are present. Both the base edid blob and the extensions are
128 bytes in size.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-3-kraxel@redhat.com
EDID is a metadata format to describe monitors. On physical hardware
the monitor has an eeprom with that data block which can be read over
i2c bus.
On a linux system you can usually find the EDID data block in
/sys/class/drm/$card/$connector/edid. xorg ships a edid-decode utility
which you can use to turn the blob into readable form.
I think it would be a good idea to use EDID for virtual displays too.
Needs changes in both qemu and guest kms drivers. This patch is the
first step, it adds an generator for EDID blobs to qemu. Comes with a
qemu-edid test tool included.
With EDID we can pass more information to the guest. Names and serial
numbers, so the guests display configuration has no boring "Unknown
Monitor". List of video modes. Display resolution, pretty important
in case we want add HiDPI support some day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-2-kraxel@redhat.com
seqlock_read_begin takes a const param since c04649eeea
("seqlock: constify seqlock_read_begin", 2018-08-23), so
we can constify the entire lookup.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Accessing the HT from an iterator results almost always
in a deadlock. Given that only one qht-internal function
uses this argument, drop it from the interface.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This currently has no users, but the use case is so common that I
think we must support it.
Note that without the appended we cannot safely remove a set of
elements; a 2-step approach (i.e. qht_iter first, keep track of
the to-be-deleted elements, and then a bunch of qht_remove calls)
would be racy, since between the iteration and the removals other
threads might insert additional elements.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Deprecate the "enforce-config-section" machine parameter
- Re-enable the wdt_ib700, endianness and vmxnet3 qtests
- Some trivial fixes and doc update patches that crossed my way
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJbqlsyAAoJEC7Z13T+cC21RbAP/3IvGfBxuRm6rBWoghjQgbl8
KU8nPnlZUtqjxmfUTILO/h+pJ3na5MQ8hh7v8JHi+xlQ2DPkECW21DtnfdxntVjw
+b+N5Ap6J22GHyEq4HJXPWAk2rDInqkU966DvL40RiMvOTfXdg9EO0TDX0VsVgZv
BR1r7/t3T0P7hiQ0XWb9U2JchRIC+Zgk34gXZPSTpoIv89fUhzNoK5LvAA6yV1FQ
TvE8VTKJm4wkqThH1ShtbJCBKjHjW/W8LYZr3YMothcs8vGjEdEcDL4BoJZDn3bF
h4VTkU+k8lp7W9LmlnPnu1WH/5ezhzdwJTeFaPJt4U10WKJptAS4vbK03DXlds9O
9d2BOXKrima2kSr1ejSe1f0kcE8fis1XFmSuhF61Nbw6ngT5+pP2JSc1XwFazd2K
zQwV4GXBLzAGnd4F2Ec+5TKzbGFVfczxeBDiBkkVmG+XdX/UXJpkpPYGAaw7DDiK
JwKVVYIPk1ll6MAbR6qEGsvE/adHNEm8lUdjXqwgbQlIeUZ2H0hCu9lJ0X81mtoQ
WZP+nMa/87COnlPX6VPVgxM2TXQOH/UbGz/WmYzZ6/gPKTX+gfwrHQGdp7Tjl33U
KxFKWioFnoqGuyWasvTtKEK67/IlrY+w1nXuuqKJg8J2/qx1SVtx45FHkRkxkIDx
4boRpx0XUqpDVdf8VhRB
=dXgp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2018-09-25' into staging
- Deprecate the usage of a network backend via "name" instead of "id"
- Deprecate the "enforce-config-section" machine parameter
- Re-enable the wdt_ib700, endianness and vmxnet3 qtests
- Some trivial fixes and doc update patches that crossed my way
# gpg: Signature made Tue 25 Sep 2018 16:58:42 BST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2018-09-25:
Revert "check: Move VMXNET3 test to common"
Revert "check: Move endianess test to common"
Revert "check: Move wdt_ib700 test to common"
tests/migration: Speed up the test on ppc64
hw/qdev-core: Fix description of instance_init
qdev: fix a typo in comment
docs: Fix some typos (most found by codespell)
trivial: Make bios files and source files non-executable
memfd: fix possible usage of the uninitialized file descriptor
hw/core/machine: Officially deprecate the enforce-config-section parameter
net/slirp: Deprecate the [hub_id name] parameter tuple
net: Deprecate the "name" parameter of -net
Makefile: Add missing dependency for qemu-deprecated.texi
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Drain fixes
- node-name parameters for block-commit
- Refactor block jobs to use transactional callbacks for exiting
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbqlBsAAoJEPQH2wBh1c9ABCQIAJ4adAAlr65kmcktHrOeQc6A
7VwSSCUa9B8BJS+/H3V8XF3eX1fa016cRQCHfH/ua3Wqavw00qcuS8Bz/ggc6qls
S1kNSSGhemvtf6ebTCN++HCxEg8g1RjsdnxaTiNWrYLKadX5kjLGofU1eAM2J/re
k5YsyB01X4RHS2L0eAUbYGgNFs+UJEU4p0aKGBPHsOj1LIYEzFhDTVNJ8OjNUG9R
mcMXFiYmQpJTV0hlIqL+pOtRvlR9YOKgkO8dmFkRe+z82f+GA+EZhLfpACxc7ilQ
HS4V2NMVucZ7G8gGudg9mqvd3u/AV5BiUtIGd0iIQ9pU9fUuPVPl977i5WHewoM=
=3TQt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xanclic/tags/pull-block-2018-09-25' into staging
Block layer patches:
- Drain fixes
- node-name parameters for block-commit
- Refactor block jobs to use transactional callbacks for exiting
# gpg: Signature made Tue 25 Sep 2018 16:12:44 BST
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/xanclic/tags/pull-block-2018-09-25: (42 commits)
test-bdrv-drain: Test draining job source child and parent
block: Use a single global AioWait
test-bdrv-drain: Fix outdated comments
test-bdrv-drain: AIO_WAIT_WHILE() in job .commit/.abort
job: Avoid deadlocks in job_completed_txn_abort()
test-bdrv-drain: Test nested poll in bdrv_drain_poll_top_level()
block: Remove aio_poll() in bdrv_drain_poll variants
blockjob: Lie better in child_job_drained_poll()
block-backend: Decrease in_flight only after callback
block-backend: Fix potential double blk_delete()
block-backend: Add .drained_poll callback
block: Add missing locking in bdrv_co_drain_bh_cb()
test-bdrv-drain: Test AIO_WAIT_WHILE() in completion callback
job: Use AIO_WAIT_WHILE() in job_finish_sync()
test-blockjob: Acquire AioContext around job_cancel_sync()
test-bdrv-drain: Drain with block jobs in an I/O thread
aio-wait: Increase num_waiters even in home thread
blockjob: Wake up BDS when job becomes idle
job: Fix missing locking due to mismerge
job: Fix nested aio_poll() hanging in job_txn_apply
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The part of the documentation of DeviceClass that talks about instance_init
is partly wrong: instance_init() functions must not abort or exit, since
the function is also called during introspection of the device already.
So if a device calls exit() during its instance_init() function, QEMU
terminates unexpectedly if somebody tries to just have a look at the
interfaces from the device with "device_add xyz,help" or with the
"device-list-properties" QOM command. This should never happen.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code looks better, it removes duplicated lines and it will ease
the introduction of common properties for the Aspeed machines.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180921161939.822-4-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In file included from /home/thuth/devel/qemu/hw/timer/aspeed_timer.c:16:
/home/thuth/devel/qemu/include/hw/misc/aspeed_scu.h:37:3: error:
redefinition of typedef 'AspeedSCUState' is a C11 feature
[-Werror,-Wtypedef-redefinition]
} AspeedSCUState;
^
/home/thuth/devel/qemu/include/hw/timer/aspeed_timer.h:27:31: note:
previous definition is here
typedef struct AspeedSCUState AspeedSCUState;
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180921161939.822-2-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GICv2's QEMU interface (sysbus MMIO regions, IRQs,
etc) is now quite complicated with the addition of the
virtualization extensions. Add a comment in the header
file which documents it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180823103818.31189-1-peter.maydell@linaro.org
When draining a block node, we recurse to its parent and for subtree
drains also to its children. A single AIO_WAIT_WHILE() is then used to
wait for bdrv_drain_poll() to become true, which depends on all of the
nodes we recursed to. However, if the respective child or parent becomes
quiescent and calls bdrv_wakeup(), only the AioWait of the child/parent
is checked, while AIO_WAIT_WHILE() depends on the AioWait of the
original node.
Fix this by using a single AioWait for all callers of AIO_WAIT_WHILE().
This may mean that the draining thread gets a few more unnecessary
wakeups because an unrelated operation got completed, but we already
wake it up when something _could_ have changed rather than only if it
has certainly changed.
Apart from that, drain is a slow path anyway. In theory it would be
possible to use wakeups more selectively and still correctly, but the
gains are likely not worth the additional complexity. In fact, this
patch is a nice simplification for some places in the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Block jobs claim in .drained_poll() that they are in a quiescent state
as soon as job->deferred_to_main_loop is true. This is obviously wrong,
they still have a completion BH to run. We only get away with this
because commit 91af091f92 added an unconditional aio_poll(false) to the
drain functions, but this is bypassing the regular drain mechanisms.
However, just removing this and telling that the job is still active
doesn't work either: The completion callbacks themselves call drain
functions (directly, or indirectly with bdrv_reopen), so they would
deadlock then.
As a better lie, tell that the job is active as long as the BH is
pending, but falsely call it quiescent from the point in the BH when the
completion callback is called. At this point, nested drain calls won't
deadlock because they ignore the job, and outer drains will wait for the
job to really reach a quiescent state because the callback is already
running.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
bdrv_do_drained_begin/end() assume that they are called with the
AioContext lock of bs held. If we call drain functions from a coroutine
with the AioContext lock held, we yield and schedule a BH to move out of
coroutine context. This means that the lock for the home context of the
coroutine is released and must be re-acquired in the bottom half.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
All callers in QEMU proper hold the AioContext lock when calling
job_finish_sync(). test-blockjob should do the same when it calls the
function indirectly through job_cancel_sync().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Even if AIO_WAIT_WHILE() is called in the home context of the
AioContext, we still want to allow the condition to change depending on
other threads as long as they kick the AioWait. Specfically block jobs
can be running in an I/O thread and should then be able to kick a drain
in the main loop context.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
In the context of draining a BDS, the .drained_poll callback of block
jobs is called. If this returns true (i.e. there is still some activity
pending), the drain operation may call aio_poll() with blocking=true to
wait for completion.
As soon as the pending activity is completed and the job finally arrives
in a quiescent state (i.e. its coroutine either yields with busy=false
or terminates), the block job must notify the aio_poll() loop to wake
up, otherwise we get a deadlock if both are running in different
threads.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Now that all of the jobs use the component finalization callbacks,
there's no use for the heavy-hammer .exit callback anymore.
job_exit becomes a glorified type shim so that we can call
job_completed from aio_bh_schedule_oneshot.
Move these three functions down into job.c to eliminate a
forward reference.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180906130225.5118-12-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add support for taking and passing forward job creation flags.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180906130225.5118-4-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add support for taking and passing forward job creation flags.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180906130225.5118-3-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add support for taking and passing forward job creation flags.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180906130225.5118-2-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The nRF51 is a Cortex-M0 microcontroller with an on-board radio module,
plus other common ARM SoC peripherals.
http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
This defines a basic model of the CPU and memory, with no peripherals
implemented at this stage.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-id: 20180831220920.27113-3-joel@jms.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: wrapped a few long lines]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here are the accumulated ppc target patches for the last several
weeks. Highlights are:
* A number of 40p / PReP cleanups
* Preliminary irq rework on the pseries machine towards the new
XIVE interrupt controller
There are a few patches which make small changes to generic device and
arm code as prerequisites to the 40p interrupt routing cleanup. They
have acks from the relevant maintainers.
-----BEGIN PGP SIGNATURE-----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=A62f
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180925' into staging
ppc patch queue 2018-09-25
Here are the accumulated ppc target patches for the last several
weeks. Highlights are:
* A number of 40p / PReP cleanups
* Preliminary irq rework on the pseries machine towards the new
XIVE interrupt controller
There are a few patches which make small changes to generic device and
arm code as prerequisites to the 40p interrupt routing cleanup. They
have acks from the relevant maintainers.
# gpg: Signature made Tue 25 Sep 2018 08:00:06 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.1-20180925:
40p: add fixed IRQ routing for LSI SCSI device
lsi53c895a: add optional external IRQ via qdev
scsi: remove unused lsi53c895a_create() and lsi53c810_create() functions
scsi: move lsi53c8xx_create() callers to lsi53c8xx_handle_legacy_cmdline()
scsi: add lsi53c8xx_handle_legacy_cmdline() function
sm501: Adjust endianness of pixel value in rectangle fill
spapr_pci: add an extra 'nr_msis' argument to spapr_populate_pci_dt
spapr: increase the size of the IRQ number space
spapr: introduce a spapr_irq class 'nr_msis' attribute
40p: use OR gate to wire up raven PCI interrupts
raven: some minor IRQ-related tidy-ups
hw/ppc: on 40p machine, change default firmware to OpenBIOS
target/ppc/cpu-models: Re-group the 970 CPUs together again
Record history of ppcemb target in common.json
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that these functions are no longer required they can be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is the function that will soon be used to replace lsi53c895a_create() and
lsi53c810_create().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
So that we don't have to call qdev_get_machine() to get the machine
class and the sPAPRIrq backend holding the number of MSIs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The new layout using static IRQ number does not leave much space to
the dynamic MSI range, only 0x100 IRQ numbers. Increase the total
number of IRQS for newer machines and introduce a legacy XICS backend
for pre-3.1 machines to maintain compatibility.
For the old backend, provide a 'nr_msis' value covering the full IRQ
number space as it does not use the bitmap allocator to allocate MSI
interrupt numbers.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The number of MSI interrupts a sPAPR machine can allocate is in direct
relation with the number of interrupts of the sPAPRIrq backend. Define
statically this value at the sPAPRIrq class level and use it for the
"ibm,pe-total-#msi" property of the sPAPR PHB.
According to the PAPR specs, "ibm,pe-total-#msi" defines the maximum
number of MSIs that are available to the PE. We choose to advertise
the maximum number of MSIs that are available to the machine for
simplicity of the model and to avoid segmenting the MSI interrupt pool
which can be easily shared. If the pool limit is reached, it can be
extended dynamically.
Finally, remove XICS_IRQS_SPAPR which is now unused.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Here's another pull request for qemu-3.1. No real theme here, just an
assortment of various fixes. Probably the most notable thing is the
removal of the ppcemb target which has been deprecated for some time
now.
-----BEGIN PGP SIGNATURE-----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=WnE4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180907' into staging
ppc patch queue 2018-09-07
Here's another pull request for qemu-3.1. No real theme here, just an
assortment of various fixes. Probably the most notable thing is the
removal of the ppcemb target which has been deprecated for some time
now.
# gpg: Signature made Fri 07 Sep 2018 08:30:02 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.1-20180907:
target-ppc: Extend HWCAP2 bits for ISA 3.0
target/ppc/kvm: set vcpu as online/offline
Fix a deadlock case in the CPU hotplug flow
spapr: Correct reference count on spapr-cpu-core
mac_newworld: implement custom FWPathProvider
uninorth: add ofw-addr property to allow correct fw path generation
mac_oldworld: implement custom FWPathProvider
grackle: set device fw_name and address for correct fw path generation
macio: add addr property to macio IDE object
macio: add macio bus to help with fw path generation
macio: move MACIOIDEState type declarations to macio.h
spapr_pci: fix potential NULL pointer dereference
spapr: fix leak of rev array
ppc: Remove deprecated ppcemb target
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAluQU38ACgkQIeENKd+X
cFRAXQgAlhNcwby+Jsk8sbLajMWXEtww9FIv+XESldPOJHmJyCkNDVZX8MuMM7+f
8NraD3YGDJvXP/BEcmyE5yPC6mx+OIi8ufzqP0rUML1x4+Tpxp8nZ7sBH197RtGg
eImPA6oKvg4wyfNOrZ+hGa8HF/iMT03TqeKggUPf3dVAs8LV2iUwBIzrRLB4IhIN
yFnhbcw8cW04tWUhYg4+viDY2k0q7fMrJZkASD/RjGMBjubJkwWvSYOdMIEWSpcG
2qLT5SohzUzHyKPONsoBKjSIP+nKgtyYR6IJh40FDd5S5RRMHe/n3q9jChIkHMma
x1eSNvVd41++QlBKqDeAlA+gbdK/uw==
=FJn/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-pullreq-20180905' into staging
A misc collection of RISC-V related patches for 3.1.
# gpg: Signature made Wed 05 Sep 2018 23:06:55 BST
# gpg: using RSA key 21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-pullreq-20180905:
riscv: remove define cpu_init()
hw/riscv/spike: Set the soc device tree node as a simple-bus
hw/riscv/virtio: Set the soc device tree node as a simple-bus
target/riscv: call gen_goto_tb on DISAS_TOO_MANY
target/riscv: optimize indirect branches
target/riscv: optimize cross-page direct jumps in softmmu
RISC-V: Simplify riscv_cpu_local_irqs_pending
RISC-V: Use atomic_cmpxchg to update PLIC bitmaps
RISC-V: Improve page table walker spec compliance
RISC-V: Update address bits to support sv39 and sv48
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
{error,warn}_report_once() are a special case of the new functions
and can simply switch to them.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180830145902.27376-3-cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Dispense with unlikely() to keep the macros as simple as possible]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add two functions to print an error/warning report once depending
on a passed-in condition variable and flip it if printed. This is
useful if you want to print a message not once-globally, but e.g.
once-per-device.
Inspired by warn_once() in hw/vfio/ccw.c, which has been replaced
with warn_report_once_cond().
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180830145902.27376-2-cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Function comments reworded]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Factor "bus_reserve", "io_reserve", "mem_reserve", "pref32_reserve"
and "pref64_reserve" fields of the "GenPCIERootPort" structure out
to "PCIResReserve" structure, so that other PCI bridges can
reuse it to add resource reserve capability.
Signed-off-by: Jing Liu <jing2.liu@linux.intel.com>
Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The PLIC previously used a mutex to protect against concurrent
access to the claimed and pending bitfields. Instead of using
a mutex, we update the bitfields using atomic_cmpxchg.
Rename sifive_plic_num_irqs_pending to sifive_plic_irqs_pending
and add an early out if any interrupts are pending as the
count of pending interrupts is not used.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
No functional change, just preparation for a followup patch
which needs a VirtIOGPU pointer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180829122101.29852-2-kraxel@redhat.com>
Now that the job infrastructure is handling the job_completed call for
all implemented jobs, we can remove the interface that allowed jobs to
schedule their own completion.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180830015734.19765-10-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Jobs are now expected to return their retcode on the stack, from the
.run callback, so we can remove that argument.
job_cancel does not need to set -ECANCELED because job_completed will
update the return code itself if the job was canceled.
While we're here, make job_completed static to job.c and remove it from
job.h; move the documentation of return code to the .run() callback and
to the job->ret property, accordingly.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20180830015734.19765-9-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
All jobs do the same thing when they leave their running loop:
- Store the return code in a structure
- wait to receive this structure in the main thread
- signal job completion via job_completed
Few jobs do anything beyond exactly this. Consolidate this exit
logic for a net reduction in SLOC.
More seriously, when we utilize job_defer_to_main_loop_bh to call
a function that calls job_completed, job_finalize_single will run
in a context where it has recursively taken the aio_context lock,
which can cause hangs if it puts down a reference that causes a flush.
You can observe this in practice by looking at mirror_exit's careful
placement of job_completed and bdrv_unref calls.
If we centralize job exiting, we can signal job completion from outside
of the aio_context, which should allow for job cleanup code to run with
only one lock, which makes cleanup callbacks less tricky to write.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180830015734.19765-4-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Jobs presently use both an Error object in the case of the create job,
and char strings in the case of generic errors elsewhere.
Unify the two paths as just j->err, and remove the extra argument from
job_completed. The integer error code for job_completed is kept for now,
to be removed shortly in a separate patch.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20180830015734.19765-3-jsnow@redhat.com
[mreitz: Dropped a superfluous g_strdup()]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Presently we codify the entry point for a job as the "start" callback,
but a more apt name would be "run" to clarify the idea that when this
function returns we consider the job to have "finished," except for
any cleanup which occurs in separate callbacks later.
As part of this clarification, change the signature to include an error
object and a return code. The error ptr is not yet used, and the return
code while captured, will be overwritten by actions in the job_completed
function.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180830015734.19765-2-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
These options likely do not work as expected as soon as the user
tries to use more than one network interface at once. The parameters
have been marked as deprecated since QEMU v2.6, so users had plenty
of time to move their scripts to the new syntax. Time to remove the
old parameters now.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 93f874fe9d.
Now with virtio-vga being resetted properly the
crash workaround is not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180821111313.27792-3-kraxel@redhat.com
We must call the reset functions for both virtio-gpu
and vga to properly reset the combo device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180821111313.27792-2-kraxel@redhat.com
This contains the offset of the IDE controller within the macio address space
and is required to allow the address to be included within the fw path.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As the in-built IDE controller is attached to the macio bus then we should also
model this the same in QEMU to aid fw path generation.
Note that all existing macio devices are moved onto the new macio bus so that
the qdev tree accurately reflects the real hardware.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The generated qapi_event_send_FOO() take an Error ** argument. They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().
Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There is no known available OS for ppc around anymore that uses page
sizes below 4k, so it does not make much sense that we keep wasting
our time on building and testing the ppcemb-softmmu target. It has
been deprecated since two releases, and nobody complained, so let's
remove this now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
vhost-user-gpu will share the same code to open a DRM node.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180713130916.4153-20-marcandre.lureau@redhat.com>
[ kraxel: buildfix: util/drm.o must be CONFIG_OPENGL not CONFIG_LINUX ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are many error_report()s that can be used in frequently called
functions, especially on IO paths. That can be unideal in that
malicious guest can try to trigger the error tons of time which might
use up the log space on the host (e.g., libvirt can capture the stderr
of QEMU and put it persistently onto disk). In VT-d emulation code, we
have trace_vtd_error() tracer. AFAIU all those places can be replaced
by something like error_report() but trace points are mostly used to
avoid the DDOS attack that mentioned above. However using trace points
mean that errors are not dumped if trace not enabled.
It's not a big deal in most modern server managements since we have
things like logrotate to maintain the logs and make sure the quota is
expected. However it'll still be nice that we just provide another way
to restrict message generations. In most cases, this kind of
error_report()s will only provide valid information on the first message
sent, and all the rest of similar messages will be mostly talking about
the same thing. This patch introduces *_report_once() helpers to allow
a message to be dumped only once during one QEMU process's life cycle.
It will make sure: (1) it's on by deffault, so we can even get something
without turning the trace on and reproducing, and (2) it won't be
affected by DDOS attack.
To implement it, I stole the printk_once() macro from Linux.
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815095328.32414-2-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Whitespace adjusted, comments improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbgCm7AAoJENSXKoln91plhJYH/jRqbCaUd04nGuyjOaYUajTL
brz3JD0XN2jD6NnDYUpuiNzawSojNzSklMA0u9AJiG+cpNK+gqW4fX+CYeX7ApjK
99+SXSejxnK3IJUNblQDD/hdCv9Dc1r12R7c80lm+aqJwi4C8hfULTbfrse/QdyA
KIHKl+c3uaWTPG2qC3mpPW/QS+IRPgRRwF/7GILuiagNmMcXyuMd2fQuePnf1rvD
ztTdtNJ0zfdFK1jlLa7D9Xe36RpS1uBinF429dNwXWM/+i1shvxc3Enzb4qEQNYe
ZeVxTomP/nO1elLZYdVUwdQYr6vmnvb1/mtTT6nq0NvHeLGjMZMqOBWGuAtdXoo=
=a8Jv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-aug-2018' into staging
MIPS queue August 2018 v6
# gpg: Signature made Fri 24 Aug 2018 16:52:27 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-aug-2018: (45 commits)
target/mips: Add definition of nanoMIPS I7200 CPU
mips_malta: Fix semihosting argument passing for nanoMIPS bare metal
mips_malta: Add setting up GT64120 BARs to the nanoMIPS bootloader
mips_malta: Add basic nanoMIPS boot code for Malta board
elf: Don't check FCR31_NAN2008 bit for nanoMIPS
elf: On elf loading, treat both EM_MIPS and EM_NANOMIPS as legal for MIPS
elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too
elf: Add EM_NANOMIPS value as a valid one for e_machine field
target/mips: Fix ERET/ERETNC behavior related to ADEL exception
target/mips: Add updating BadInstr and BadInstrX for nanoMIPS
target/mips: Add availability control via bit NMS
target/mips: Add emulation of DSP ASE for nanoMIPS - part 6
target/mips: Add emulation of DSP ASE for nanoMIPS - part 5
target/mips: Add emulation of DSP ASE for nanoMIPS - part 4
target/mips: Add emulation of DSP ASE for nanoMIPS - part 3
target/mips: Add emulation of DSP ASE for nanoMIPS - part 2
target/mips: Add emulation of DSP ASE for nanoMIPS - part 1
target/mips: Implement MT ASE support for nanoMIPS
target/mips: Fix pre-nanoMIPS MT ASE instructions availability control
target/mips: Add emulation of nanoMIPS 32-bit branch instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The JSON parser has three public headers, json-lexer.h, json-parser.h,
json-streamer.h. They all contain stuff that is of no interest
outside qobject/json-*.c.
Collect the public interface in include/qapi/qmp/json-parser.h, and
everything else in qobject/json-parser-int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-54-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-53-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-52-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-51-armbru@redhat.com>
json_message_process_token() accumulates tokens until it got the
sequence of tokens that comprise a single JSON value (it counts curly
braces and square brackets to decide). It feeds those token sequences
to json_parser_parse(). If a non-empty sequence of tokens remains at
the end of the parse, it's silently ignored. check-qjson.c cases
unterminated_array(), unterminated_array_comma(), unterminated_dict(),
unterminated_dict_comma() demonstrate this bug.
Fix as follows. Introduce a JSON_END_OF_INPUT token. When the
streamer receives it, it feeds the accumulated tokens to
json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-46-armbru@redhat.com>
The callback to consume JSON values takes QObject *json, Error *err.
If both are null, the callback is supposed to make up an error by
itself. This sucks.
qjson.c's consume_json() neglects to do so, which makes
qobject_from_json() null instead of failing. I consider that a bug.
The culprit is json_message_process_token(): it passes two null
pointers when it runs into a lexical error or a limit violation. Fix
it to pass a proper Error object then. Update the callbacks:
* monitor.c's handle_qmp_command(): the code to make up an error is
now dead, drop it.
* qga/main.c's process_event(): lumps the "both null" case together
with the "not a JSON object" case. The former is now gone. The
error message "Invalid JSON syntax" is misleading for the latter.
Improve it to "Input must be a JSON object".
* qobject/qjson.c's consume_json(): no update; check-qjson
demonstrates qobject_from_json() now sets an error on lexical
errors, but still doesn't on some other errors.
* tests/libqtest.c's qmp_response(): the Error object is now reliable,
so use it to improve the error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-40-armbru@redhat.com>
The JSON parser optionally supports interpolation. The lexer
recognizes interpolation tokens unconditionally. The parser rejects
them when interpolation is disabled, in parse_interpolation().
However, it neglects to set an error then, which can make
json_parser_parse() fail without setting an error.
Move the check for unwanted interpolation from the parser's
parse_interpolation() into the lexer's finite state machine. When
interpolation is disabled, '%' is now handled like any other
unexpected character.
The next commit will improve how such lexical errors are handled.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-39-armbru@redhat.com>
The JSON parser optionally supports interpolation. The code calls it
"escape". Awkward, because it uses the same term for escape sequences
within strings. The latter usage is consistent with RFC 8259 "The
JavaScript Object Notation (JSON) Data Interchange Format" and ISO C.
Call the former "interpolation" instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-38-armbru@redhat.com>
The classical way to structure parser and lexer is to have the client
call the parser to get an abstract syntax tree, the parser call the
lexer to get the next token, and the lexer call some function to get
input characters.
Another way to structure them would be to have the client feed
characters to the lexer, the lexer feed tokens to the parser, and the
parser feed abstract syntax trees to some callback provided by the
client. This way is more easily integrated into an event loop that
dispatches input characters as they arrive.
Our JSON parser is kind of between the two. The lexer feeds tokens to
a "streamer" instead of a real parser. The streamer accumulates
tokens until it got the sequence of tokens that comprise a single JSON
value (it counts curly braces and square brackets to decide). It
feeds those token sequences to a callback provided by the client. The
callback passes each token sequence to the parser, and gets back an
abstract syntax tree.
I figure it was done that way to make a straightforward recursive
descent parser possible. "Get next token" becomes "pop the first
token off the token sequence". Drawback: we need to store a complete
token sequence. Each token eats 13 + input characters + malloc
overhead bytes.
Observations:
1. This is not the only way to use recursive descent. If we replaced
"get next token" by a coroutine yield, we could do without a
streamer.
2. The lexer reports errors by passing a JSON_ERROR token to the
streamer. This communicates the offending input characters and
their location, but no more.
3. The streamer reports errors by passing a null token sequence to the
callback. The (already poor) lexical error information is thrown
away.
4. Having the callback receive a token sequence duplicates the code to
convert token sequence to abstract syntax tree in every callback.
5. Known bug: the streamer silently drops incomplete token sequences.
This commit rectifies 4. by lifting the call of the parser from the
callbacks into the streamer. Later commits will address 3. and 5.
The lifting removes a bug from qjson.c's parse_json(): it passed a
pointer to a non-null Error * in certain cases, as demonstrated by
check-qjson.c.
json_parser_parse() is now unused. It's a stupid wrapper around
json_parser_parse_err(). Drop it, and rename json_parser_parse_err()
to json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-35-armbru@redhat.com>
json_lexer_init() takes the function to process a token as an
argument. It's always json_message_process_token(). Makes the code
harder to understand for no actual gain. Drop the indirection.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-34-armbru@redhat.com>
The lexer always returns 0 when char feeding. Furthermore, none of the
caller care about the return value.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180326150916.9602-10-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180823164025.12553-32-armbru@redhat.com>
We reject bytes that can't occur in valid UTF-8 (\xC0..\xC1,
\xF5..\xFF in the lexer. That's insufficient; there's plenty of
invalid UTF-8 not containing these bytes, as demonstrated by
check-qjson:
* Malformed sequences
- Unexpected continuation bytes
- Missing continuation bytes after start bytes other than
\xC0..\xC1, \xF5..\xFD.
* Overlong sequences with start bytes other than \xC0..\xC1,
\xF5..\xFD.
* Invalid code points
Fixing this in the lexer would be bothersome. Fixing it in the parser
is straightforward, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-23-armbru@redhat.com>
Modify load_elf32()/load_elf64() to treat EM_NANOMIPS as legal as
EM_MIPS is.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Value 249 is registered as valid for usage for nanoMIPS executables.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
-----BEGIN PGP SIGNATURE-----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=GExd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20180822-1' into staging
migration/next for 20180822
# gpg: Signature made Wed 22 Aug 2018 12:07:59 BST
# gpg: using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20180822-1:
migration: hold the lock only if it is really needed
migration: move handle of zero page to the thread
migration: drop the return value of do_compress_ram_page
migration: introduce save_zero_page_to_file
migration: fix counting normal page for compression
migration: do not wait for free thread
migration: poll the cm event for destination qemu
tests/migration-test: Silence the kvm_hv message by default
migration: implement the shutdown for RDMA QIOChannel
migration: poll the cm event while wait RDMA work request completion
migration: invoke qio_channel_yield only when qemu_in_coroutine()
migration: implement io_set_aio_fd_handler function for RDMA QIOChannel
migration: Stop rdma yielding during incoming postcopy
migration: implement bi-directional RDMA QIOChannel
migration: create a dedicated connection for rdma return path
migration: disable RDMA WRITE after postcopy started
migrate/cpu-throttle: Add max-cpu-throttle migration parameter
docs/migration: Clarify pre_load in subsections
migration: Correctly handle subsections with no 'needed' function
qapi/migration.json: fix the description for "query-migrate" output
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJbfRjcAAoJEPSH7xhYctcj6vkP/0CxdFLEJ5zfmQCT9plrcenc
4CtR3syKimF1CSk9eKPE8V3oiZSBxuM1FJYPhH8d9UbYcWrItGLr/dgh1EAgurAI
P4oeWqI21CGeCWQGduhmQ51vSw1b8JTdNYWmb3QAsMBUugZYla4lvC3R5h63vmBI
4U1RzQrZmmN9svnNMx22dCInbPNoayR3Ekr7z/bF6sRG/B+ZwecenVoD9X8T/Ozu
epx9OOoBfMGDB5wbEEx/RUKrMsGH5D712QeMHUtGYmLRs1Wl4AV7Si+bSd3oi+GI
aL6ZjuaOofGaESOuH7fTkTGhGgmcPd7+pLPqpEYIJ3wmQOOQP/dp9B+6VXCxTQcA
y5F9FBEP5nQL+OIusvi+l65PqzstrKtxrSzWPGHgmosdLead15znZ4Z6YdOtHWHr
ZZOW55M2ZvlZvEWB3hHmT9rjZFP4Uu9XFIW05gzQiqVhcKemtgQ3hBiX+OvxRpPM
RpGLqGK/oDwadvEsNitYqbRJDe74VSAxOtmvEsDfJLzRoyHM1zHw3au00NdyGhMp
89Xc5AnkuHJLCFZ9duXErt5GQz/7EzHkLpQ16pqyuetgLc50ytED1tgqiJl6+Td1
IS4me8wwBpk+IvRD0zsh4p/FHocL684CSP5+AZwcy8RljtbBacbvmAS6484RSx4c
rWL39dB2uhvHEErmS9/+
=2bke
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/check/20180822' into staging
check/next for 20180822
# gpg: Signature made Wed 22 Aug 2018 09:03:40 BST
# gpg: using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/check/20180822:
check: Only test tpm devices when they are compiled in
check: Only test usb-ehci when it is compiled in
check: Only test usb-uhci devices when they are compiled in
check: Only test usb-ohci when it is compiled in
check: Only test nvme when it is compiled in
check: Only test pvpanic when it is compiled in
check: Only test wdt_ib700 when it is compiled in
check: Only test sdhci when it is compiled in
check: Only test i82801b11 when it is compiled in
check: Only test ioh3420 when it is compiled in
check: Only test ipack when it is compiled in
check: Only test hda when it is compiled in
check: Only test ac97 when it is compiled in
check: Only test es1370 when it is compiled in
check: Only test rtl8139 when it is compiled in
check: Only test pcnet when it is compiled in
check: Only test eepro100 when it is compiled in
check: Only test ne2000 when it is compiled in
check: Only test vmxnet3 when it is compiled in
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Validate the config settings that the guest tries to set.
The wiki page documentation is not really accurate here:
generally rather than failing requests to set bad parameters,
the hardware will just clip them to something sensible.
Validate the most important parameters: sizes and
the viewport offsets. This prevents the framebuffer
code from trying to read out-of-range memory.
In the property handling code, we validate the new parameters every
time we encounter a tag that sets them. This means we validate the
config multiple times if the request includes multiple config-setting
tags, but the code would require significant restructuring to do a
validation only once but still return the clipped settings for
get-parameter tags and the buffer allocation tag.
Validation of settings made via the older bcm2835_fb_mbox_push()
function will be done in the next commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-8-peter.maydell@linaro.org
The raspi framebuffir in bcm2835_fb supports the definition
of a virtual "viewport", which is smaller than the full
physical framebuffer size and at an adjustable offset within
it. Only the viewport area is sent to the screen. This allows
the guest to do things like double buffering, or scrolling
by adjusting the viewport origin. Currently QEMU doesn't
implement this at all.
Add support for this feature:
* the property mailbox code needs to distinguish the
virtual width/height from the physical width/height
* the framebuffer code needs to do something with the
virtual width/height/origin information
Note that the wiki documentation on the semantics of the
virtual and physical height and width has it the wrong way
around -- the virtual size is the size of the allocated
buffer, and the physical size is the size of the display,
so the virtual size is always the same as or larger than
the physical.
If the viewport size is set smaller than the physical
screen size, we ignore the viewport settings completely
and just display the physical screen area.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-7-peter.maydell@linaro.org
Abstract out the calculation of the pitch and size of the
framebuffer into functions that operate on the BCM2835FBConfig
struct -- these are about to get a little more complicated
when we add support for virtual and physical sizes differing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-6-peter.maydell@linaro.org
The bcm2835_fb's initial resolution and other parameters are set
via QOM properties. We should reset to those initial values on
device reset, which means we need to save the QOM property
values somewhere that they are not overwritten by guest
changes to the framebuffer configuration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-5-peter.maydell@linaro.org
The BCM2835FBState struct has a 'pitch' field which is a
cached copy of xres * (bpp >> 3), and a 'size' field which is
a cached copy of pitch * yres. However we don't actually do
anything with these fields; delete them. We retain the
now-unused slots in the VMState struct for migration
compatibility.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-4-peter.maydell@linaro.org
Refactor the fb property setting code so that rather than
using a set of pointers to local variables to track
whether a config value has been updated in the current
mbox and if so what its new value is, we just copy
all the current settings of the fb at the start, and
then update that copy as we go along, before asking
the fb to switch to it at the end.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-3-peter.maydell@linaro.org
The handling of framebuffer properties in the bcm2835_property code
is a bit clumsy, because for each of the many fb related properties
we try to track the value we're about to set and whether we're going
to be setting a value, and then we hand all the new values off
to the framebuffer via a function which takes them all as separate
arguments. It would be simpler if the property code could easily
copy all the framebuffer's current settings, update them with
the new specified values and then ask the framebuffer to switch
to the new set.
As the first part of this refactoring, pull all the fb config
settings fields in BCM2835FBState out into their own struct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-2-peter.maydell@linaro.org
Create a new include file for the pl022's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.
While we're adding the new file to MAINTAINERS, add
also the .c file, which was missing an entry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-16-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The IoTKit doesn't have any MSCs itself but it does need
some wiring to connect the external signals from MSCs
in the outer board model up to the registers and the
NVIC IRQ line.
We also need to expose a MemoryRegion corresponding to
the AHB bus, so that MSCs in the outer board model can
use that as their downstream port. (In the FPGA this is
the "AHB Slave Expansion" ports shown in the block
diagram in the AN505 documentation.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-14-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The IoTKit does not have any Master Security Contollers itself,
but it does provide registers in the secure privilege control
block which allow control of MSCs in the external system.
Add support for these registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-13-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement a model of the TrustZone Master Securtiy Controller,
as documented in the Arm CoreLink SIE-200 System IP for
Embedded TRM (DDI0571G):
https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g
The MSC is intended to sit in front of a device which can
be a bus master (eg a DMA controller) and programmably gate
its transactions. This allows a bus-mastering device to be
controlled by non-secure code but still restricted from
making accesses to addresses which are secure-only.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180820141116.9118-12-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Wire up the system control element's register banks
(sysctl and sysinfo).
This is the last of the previously completely unimplemented
components in the IoTKit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-11-peter.maydell@linaro.org
Implement the IoTKit system control element's system information
block; this is just a pair of read-only version/config registers,
plus the usual PID/CID ID registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-10-peter.maydell@linaro.org
The Arm IoTKit includes a system control element which
provides a block of read-only ID registers and a block
of read-write control registers. Implement a minimal
version of this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-9-peter.maydell@linaro.org
The IoTKit has a CMSDK timer device that runs on the S32KCLK.
Create this and wire it up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-8-peter.maydell@linaro.org
The IoTKit includes three different instances of the
CMSDK APB watchdog; create and wire them up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-7-peter.maydell@linaro.org
Now we have a model of the CMSDK dual timer, we can wire it
up in the IoTKit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-5-peter.maydell@linaro.org
The Arm Cortex-M System Design Kit includes a "dual-input timer module"
which combines two programmable down-counters. Implement a model
of this device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-4-peter.maydell@linaro.org
In the MPS2 FPGAIO, PSCNTR is a free-running downcounter with
a reload value configured via the PRESCALE register, and
COUNTER counts up by 1 every time PSCNTR reaches zero.
Implement these counters.
We can just increment the counters migration subsection's
version ID because we only added it in the previous commit,
so no released QEMU versions will be using it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-3-peter.maydell@linaro.org
The MPS2 FPGAIO block includes some simple free-running counters.
Implement these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-2-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814002653.12828-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814002653.12828-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some scanouts during boot are top-down without it.
y0_top is set from VHOST_USER_GPU_DMABUF_SCANOUT code path in the last
patch of this series.
In current QEMU code base, only vfio/display uses dmabuf API. But the
VFIO query interface doesn't provide or need that detail so far.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180713130916.4153-5-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlt+5OYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPtxwf8CQM/F+0L+EKeYfYcVgVZsDhhOkLj
Pm61q0bZsWKLby5jCqIDYw7Z/vodJnSS1DO0slIRoXxvQ9DwlkbBnBy/aG/E9U0q
WF1vbCezibDIt7sGcsu9F5zXU9eqe+E6dZfxFrv8FQSOFVxn34TfeJagWLCtzg0d
LnVTF/e4zJD8IQiM7w6lJQxua3fz13ssPEg2KnMkguDhACMwvZ/K/cA2AJkHRMhY
sroPMwLHlrF1NOoeCIrWxYUmSGCRCAy1DmiPGiiSs0yBq/dL0UkAa5Eu6HMQ7rgI
zUff3JDmzEjixUSIEbpVRN+yPCN0/ACSOpJUrKLDxXbc4nZ+PBQ04YpyPQ==
=UZiV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
# gpg: Signature made Thu 23 Aug 2018 17:46:30 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
KVM: cleanup unnecessary #ifdef KVM_CAP_...
target/i386: update MPX flags when CPL changes
i2c: pm_smbus: Add the ability to force block transfer enable
i2c: pm_smbus: Don't delay host status register busy bit when interrupts are enabled
i2c: pm_smbus: Add interrupt handling
i2c: pm_smbus: Add block transfer capability
i2c: pm_smbus: Make the I2C block read command read-only
i2c: pm_smbus: Fix the semantics of block I2C transfers
i2c: pm_smbus: Clean up some style issues
pc-dimm: assign and verify the "addr" property during pre_plug
pc: drop memory region alignment check for 0
util/oslib-win32: indicate alignment for qemu_anon_ram_alloc()
pc-dimm: assign and verify the "slot" property during pre_plug
ipmi: Use proper struct reference for BT vmstate
vhost-scsi: expose 't10_pi' property for VIRTIO_SCSI_F_T10_PI
vhost-scsi: unify vhost-scsi get_features implementations
vhost-user-scsi: move host_features into VHostSCSICommon
cpus: allow cpu_get_ticks out of BQL
cpus: protect TimerState writes with a spinlock
seqlock: add QemuLockable support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PIIX4 hardware has block transfer buffer always enabled in
the hardware, but the i801 does not. Add a parameter to pm_smbus_init
to force on the block transfer so the PIIX4 handler can enable this
by default, as it was disabled by default before.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-9-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the necessary code so that interrupts actually work from
the pm_smbus device.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-7-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There was no block transfer code in pm_smbus.c, and it is needed
for some devices. So add it.
This adds both byte-by-byte block transfers and buffered block
transfers.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-5-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The I2C block transfer commands was not implemented correctly, it
read a length byte and such like it was an smbus transfer.
So fix the smbus_read_block() and smbus_write_block() functions
so they can properly handle I2C transfers, and normal SMBus
transfers (for upcoming changes). Pass in a transfer size and
a bool to know whether to use the size byte (like SMBus) or use
the length given (like I2C).
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-3-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can assign and verify the address before realizing and trying to plug.
reading/writing the address property should never fail for DIMMs, so let's
reduce error handling a bit by using &error_abort. Getting access to the
memory region now might however fail. So forward errors from
get_memory_region() properly.
As all memory devices should use the alignment of the underlying memory
region for guest physical address asignment, do detection of the
alignment in pc_dimm_pre_plug(), but allow pc.c to overwrite the
alignment for compatibility handling.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180801133444.11269-5-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can assign and verify the slot before realizing and trying to plug.
reading/writing the slot property should never fail, so let's reduce
error handling a bit by using &error_abort.
To do this during pre_plug, add and use (x86, ppc) pc_dimm_pre_plug().
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180801133444.11269-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for having vhost-scsi also make use of host_features,
move it from struct VHostUserSCSI into struct VHostSCSICommon.
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Message-Id: <20180808195235.5843-2-gedwards@ddn.com>
Reviewed-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Iterating over the list without using atomics is undefined behaviour,
since the list can be modified concurrently by other threads (e.g.
every time a new thread is created in user-mode).
Fix it by implementing the CPU list as an RCU QTAILQ. This requires
a little bit of extra work to traverse list in reverse order (see
previous patch), but other than that the conversion is trivial.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-12-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's unnecessary because the pointer isn't dereferenced.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-3-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To avoid undefined behaviour.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-2-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The BQL is acquired via qemu_mutex_lock_iothread(), which makes
the profiler assign the associated wait time (i.e. most of
BQL wait time) entirely to that function. This loses the original
call site information, which does not help diagnose BQL contention.
Fix it by tracking the callers explicitly.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I first implemented this by deleting all entries in the global
hash table. But doing that safely slows down profiling, since
we'd need to introduce rcu_read_lock/unlock in the fast path.
What's implemented here avoids messing with the thread-local
data in the global hash table. It achieves this by taking a snapshot
of the current state, so that subsequent reports present the delta
wrt to the snapshot.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The goal of this module is to profile synchronization primitives (i.e.
mutexes, recursive mutexes and condition variables) so that scalability
issues can be quickly diagnosed.
Sync primitives are profiled by QSP based on the vaddr of the object accessed
as well as the call site (file:line_nr). That means the same object called
from two different call sites will be tracked in separate entries, which
might be reported together or separately (see subsequent commit on
call site coalescing).
Some perf numbers:
Host: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz
Command: taskset -c 0 tests/atomic_add-bench -d 5 -m
- Before: 54.80 Mops/s
- After: 54.75 Mops/s
That is, a negligible slowdown due to the now indirect call to
qemu_mutex_lock. Note that using a branch instead of an indirect
call introduces a more severe slowdown (53.65 Mops/s, i.e. 2% slowdown).
Enabling the profiler (with -p, added in this series) is more interesting:
- No profiling: 54.75 Mops/s
- W/ profiling: 12.53 Mops/s
That is, a 4.36X slowdown.
We can break down this slowdown by removing the get_clock calls or
the entry lookup:
- No profiling: 54.75 Mops/s
- W/o get_clock: 25.37 Mops/s
- W/o entry lookup: 19.30 Mops/s
- W/ profiling: 12.53 Mops/s
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixup some typos in the comments.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <20180813093402.10852-1-jusual@mail.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Try to hold src_page_req_mutex only if the queue is not
empty
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was not possible to compile out pvpanic. Use the same trick
than applesmc.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Here's my first ppc & spapr pull request for qemu-3.1. This contains
a bunch of things that have accumulated while 3.0 was in freeze.
Highlights are:
* SLOF firmware update
* A number of floating point cleanups from Richard Henderson and
Yasmin Beatriz
* A new model for assigning irq numbers on spapr, this is an
important preliminary step towards implementing the POWER9
"XIVE" interrupt controller
-----BEGIN PGP SIGNATURE-----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=viH7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180821' into staging
ppc patch queue 2018-08-21
Here's my first ppc & spapr pull request for qemu-3.1. This contains
a bunch of things that have accumulated while 3.0 was in freeze.
Highlights are:
* SLOF firmware update
* A number of floating point cleanups from Richard Henderson and
Yasmin Beatriz
* A new model for assigning irq numbers on spapr, this is an
important preliminary step towards implementing the POWER9
"XIVE" interrupt controller
# gpg: Signature made Tue 21 Aug 2018 05:32:44 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.1-20180821: (26 commits)
ppc: add DBCR based debugging
spapr_pci: factorize the use of SPAPR_MACHINE_GET_CLASS()
mac_newworld: don't use legacy fw_cfg_init_mem() function
mac_oldworld: don't use legacy fw_cfg_init_mem() function
40p: don't use legacy fw_cfg_init_mem() function
qemu-doc: mark ppc/prep machine as deprecated
hw/ppc: deprecate the machine type 'prep', replaced by '40p'
spapr: introduce a IRQ controller backend to the machine
hw/ppc/ppc405_uc: Convert away from old_mmio
hw/ppc/ppc_boards: Don't use old_mmio for ref405ep_fpga
hw/ppc/prep: Remove ifdeffed-out stub of XCSR code
spapr: introduce a fixed IRQ number space
spapr: Add a pseries-3.1 machine type
target/ppc: simplify bcdadd/sub functions
xics: don't include "target/ppc/cpu-qom.h" in "hw/ppc/xics.h"
vfio/spapr: Allow backing bigger guest IOMMU pages with smaller physical pages
target/ppc: bcdsub fix sign when result is zero
target/ppc: Use non-arithmetic conversions for fp load/store
target/ppc: Honor fpscr_ze semantics and tidy fre, fresqrt
target/ppc: Tidy helper_fsqrt
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes nvdimm persistence fixes queued before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbepoTAAoJECgfDbjSjVRpLioH/3BPps8FLh4x2gZSq3B+u72O
RYUA3I3TilEGyc9yf8o7e1Hf+pQAJBEmulcnKxXFVWZIJ1GVLPt4NZCMQGiPDnJL
+RCT/Q64PUy09hRjddAasikrvXa4YOsRgBgJJToO7v9PSQSaU3fC7O3hNea7KcF/
C4SSqkUgxyDhCCYHHblpKxFz/wtwy4ZaCGSdozIdmKNPJ6/ye8wOQ1Mq9e1Mwp18
S6ilJub5IwB6aM2KVMmX4AFomF4u2cn153ts8fI+Dyo4/NE6P4+viDlz3BOBKdzm
kmd49h6/n4Lenoo4oI1yNHSuIJJTVfvnoLu6rG7mPbQKgxNd1uN4KuUIygU5PCY=
=Xcaj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc: fixes
This includes nvdimm persistence fixes queued before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 20 Aug 2018 11:38:11 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
migration/ram: ensure write persistence on loading all data to PMEM.
migration/ram: Add check and info message to nvdimm post copy.
mem/nvdimm: ensure write persistence to PMEM in label emulation
hostmem-file: add the 'pmem' option
configure: add libpmem support
memory, exec: switch file ram allocation functions to 'flags' parameters
memory, exec: Expose all memory block related flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This proposal moves all the related IRQ routines of the sPAPR machine
behind a sPAPR IRQ backend interface 'spapr_irq' to prepare for future
changes. First of which will be to increase the size of the IRQ number
space, then, will follow a new backend for the POWER9 XIVE IRQ controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This proposal introduces a new IRQ number space layout using static
numbers for all devices, depending on a device index, and a bitmap
allocator for the MSI IRQ numbers which are negotiated by the guest at
runtime.
As the VIO device model does not have a device index but a "reg"
property, we introduce a formula to compute an IRQ number from a "reg"
value. It should minimize most of the collisions.
The previous layout is kept in pre-3.1 machines raising the
'legacy_irq_allocation' machine class flag.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The last user of the PowerPCCPU typedef in "hw/ppc/xics.h" vanished with
commit b1fd36c363. It isn't necessary to
include "target/ppc/cpu-qom.h" there anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment the PPC64/pseries guest only supports 4K/64K/16M IOMMU
pages and POWER8 CPU supports the exact same set of page size so
so far things worked fine.
However POWER9 supports different set of sizes - 4K/64K/2M/1G and
the last two - 2M and 1G - are not even allowed in the paravirt interface
(RTAS DDW) so we always end up using 64K IOMMU pages, although we could
back guest's 16MB IOMMU pages with 2MB pages on the host.
This stores the supported host IOMMU page sizes in VFIOContainer and uses
this later when creating a new DMA window. This uses the system page size
(64k normally, 2M/16M/1G if hugepages used) as the upper limit of
the IOMMU pagesize.
This changes the type of @pagesize to uint64_t as this is what
memory_region_iommu_get_min_page_size() returns and clz64() takes.
There should be no behavioral changes on platforms other than pseries.
The guest will keep using the IOMMU page size selected by the PHB pagesize
property as this only changes the underlying hardware TCE table
granularity.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This option has been deprecated for two releases; remove it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently our PL080/PL081 model uses a combination of the CPU's
address space (via cpu_physical_memory_{read,write}()) and the
system address space for performing DMA accesses.
For the PL081s in the MPS FPGA images, their DMA accesses
must go via Master Security Controllers. Switch the
PL080/PL081 model to take a MemoryRegion property which
defines its downstream for making DMA accesses.
Since the PL08x are only used in two board models, we
make provision of the 'downstream' link mandatory and convert
both users at once, rather than having it be optional with
a default to the system address space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The PL080 and PL081 have three outgoing interrupt lines:
* DMACINTERR signals DMA errors
* DMACINTTC is the DMA count interrupt
* DMACINTR is a combined interrupt, the logical OR of the other two
We currently only implement DMACINTR, because that's all the
realview and versatile boards needed, but the instances of the
PL081 in the MPS2 firmware images use all three interrupt lines.
Implement the missing DMACINTERR and DMACINTTC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Create a new include file for the pl081's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The Arm Cortex-M System Design Kit includes a simple watchdog module
based on a 32-bit down-counter. Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The mmio_interface device was a purely internal artifact
of the implementation of the memory subsystem's request_ptr
APIs. Now that we have removed those APIs, we can remove
the mmio_interface device too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20180817114619.22354-4-peter.maydell@linaro.org
Remove the obsolete MMIO request_ptr APIs; they have no
users now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20180817114619.22354-3-peter.maydell@linaro.org
Generate an interrupt if USR2_RDR and UCR4_DREN are both set.
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id: 1534341354-11956-1-git-send-email-hans-erik.floryd@rt-labs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If a vfio assigned device makes use of a physical IOMMU, then memory
ballooning is necessarily inhibited due to the page pinning, lack of
page level granularity at the IOMMU, and sufficient notifiers to both
remove the page on balloon inflation and add it back on deflation.
However, not all devices are backed by a physical IOMMU. In the case
of mediated devices, if a vendor driver is well synchronized with the
guest driver, such that only pages actively used by the guest driver
are pinned by the host mdev vendor driver, then there should be no
overlap between pages available for the balloon driver and pages
actively in use by the device. Under these conditions, ballooning
should be safe.
vfio-ccw devices are always mediated devices and always operate under
the constraints above. Therefore we can consider all vfio-ccw devices
as balloon compatible.
The situation is far from straightforward with vfio-pci. These
devices can be physical devices with physical IOMMU backing or
mediated devices where it is unknown whether a physical IOMMU is in
use or whether the vendor driver is well synchronized to the working
set of the guest driver. The safest approach is therefore to assume
all vfio-pci devices are incompatible with ballooning, but allow user
opt-in should they have further insight into mediated devices.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
sparc32plus has 64bit long type but only 32bit virtual address space.
For instance, "apt-get upgrade" failed because of a mmap()/msync()
sequence.
mmap() returned 0xff252000 but msync() used g2h(0xffffffffff252000)
to find the host address. The "(target_ulong)" in g2h() doesn't fix the
address because it is 64bit long.
This patch introduces an "abi_ptr" that is set to uint32_t
if the virtual address space is addressed using 32bit in the linux-user
case. It stays set to target_ulong with softmmu case.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180814171217.14680-1-laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[lv: added "%" in TARGET_ABI_FMT_ptr "%"PRIx64]
For the older machines (such as Mac and SPARC) the DT nodes representing
bootdevices for disk nodes are irregular for mainly historical reasons.
Since the majority of bootdevice nodes for these machines either do not have a
separate disk node or require different (custom) names then it is much easier
for processing to just disable all suffixes for a particular machine.
Introduce a new ignore_boot_device_suffixes MachineClass property to control
bootdevice suffix generation, defaulting to false in order to preserve
compatibility.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20180810124027.10698-1-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbdbIoAAoJENSXKoln91pl9KwIAJQ0CB4V/eRlvPOj828qLJyt
FxCETpCKBD1mSRX80E2HdYdaj8KfhhKrd9R2Wrk2VsiTQhLA0+hYsLxuT8VfPjsX
8WSN7egxzzA8Hzm1+wbwFCDNL13xjuhHWPk9YA1RYS6eQJot/Y27KYfvt/OPTrBO
jGaTmvXOE9q3qXZczP2TwipYkehg1+Ss5ZJl7dUmHc3Iek5t/H+kumkhBPoJqwAQ
wcwQuPm2KRGLuq9aB2IVbtfJA5Rme1GMFDWZicitJX2uK+Mx76fgi9IorrW6XAyM
6LM8DjvrivxW+UgZ+3QdJKkQCbyIrXqDAp1MRd3CWMlB576WWKm6RUTZclSo9gI=
=m1CJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-aug-2018' into staging
MIPS queue Aug 16, 2018
# gpg: Signature made Thu 16 Aug 2018 18:19:36 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-aug-2018:
qemu-doc: Amend MIPS-related items
linux-user: Add preprocessor availability control to some syscalls
linux-user: Update MIPS syscall numbers up to kernel 4.18 headers
elf: Add ELF flags for MIPS machine variants
elf: Remove duplicate preprocessor constant definition
target/mips: Check ELPA flag only in some cases of MFHC0 and MTHC0
target/mips: Don't update BadVAddr register in Debug Mode
target/mips: Implement CP0 Config1.WR bit functionality
target/mips: Add CP0 BadInstrX register
target/mips: Update some CP0 registers bit definitions
target/mips: Fix two instances of shadow variables
target/mips: Mark switch fallthroughs with interpretable comments
target/mips: Avoid case statements formulated by ranges - part 2
target/mips: Avoid case statements formulated by ranges - part 1
MAINTAINERS: Update target/mips maintainer's email addresses
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add MIPS machine variants ELF flags so that the emulation behavior
can be adjusted if needed.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Remove duplicate preprocessor constant definition for EF_MIPS_ARCH.
The duplicate was introduced in commit 45506bdd. It placed the
constant EF_MIPS_ARCH in a better place, however it did not remove
the original. This patch removes the original occurrence.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
This will be used to construct a memory region beyond the RAM region
to let firmwares scan the address space with load/store to guess how
much RAM the SoC has.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-7-joel@jms.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes the intended protection of read-only values in the
configuration register. They were being always set to zero by mistake.
The read-only fields depend on the configured memory size of the system,
so they cannot be fixed at compile time. The most straight forward
option was to store them in the state structure.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-3-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SDMC on the ast2500 has 170 registers.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-2-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds Intel Hexadecimal Object File format support to the
generic loader device. The file format specification is available here:
http://www.piclist.com/techref/fileext/hex/intel.htm
This file format is often used with microcontrollers such as the
micro:bit, Arduino, STM32, etc. Users expect to be able to run .hex
files directly with without first converting them to ELF. Most
micro:bit code is developed in web-based IDEs without direct user access
to binutils so it is important for QEMU to handle this file format
natively.
Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180814162739.11814-6-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Image file loaders may add a series of roms. If an error occurs partway
through loading there is no easy way to drop previously added roms.
This patch adds a transaction mechanism that works like this:
rom_transaction_begin();
...call rom_add_*()...
rom_transaction_end(ok);
If ok is false then roms added in this transaction are dropped.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180814162739.11814-5-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some ARM CPUs have bitbanded IO, a memory region that allows convenient
bit access via 32-bit memory loads/stores. This eliminates the need for
read-modify-update instruction sequences.
This patch makes this optional feature an ARMv7MState qdev property,
allowing boards to choose whether they want bitbanding or not.
Status of boards:
* iotkit (Cortex M33), no bitband
* mps2 (Cortex M3), bitband
* msf2 (Cortex M3), bitband
* stellaris (Cortex M3), bitband
* stm32f205 (Cortex M3), bitband
As a side-effect of this patch, Peter Maydell noted that the Ethernet
controller on mps2 board is now accessible. Previously they were hidden
by the bitband region (which does not exist on the real board).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180814162739.11814-2-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=DuZ8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-tests-2018-08-16' into staging
Testing patches for 2018-08-16
# gpg: Signature made Thu 16 Aug 2018 09:34:43 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-tests-2018-08-16: (25 commits)
libqtest: Improve error reporting for bad read from QEMU
tests/libqtest: Improve kill_qemu()
libqtest: Rename qtest_FOOv() to qtest_vFOO() for consistency
libqtest: Replace qtest_startf() by qtest_initf()
libqtest: Enable compile-time format string checking
migration-test: Clean up string interpolation into QMP, part 3
migration-test: Clean up string interpolation into QMP, part 2
migration-test: Clean up string interpolation into QMP, part 1
migration-test: Make wait_command() cope with '%'
tests: New helper qtest_qmp_receive_success()
migration-test: Make wait_command() return the "return" member
tests: Clean up string interpolation around qtest_qmp_device_add()
cpu-plug-test: Don't pass integers as strings to device_add
tests: Clean up string interpolation into QMP input (simple cases)
tests: Pass literal format strings directly to qmp_FOO()
qobject: qobject_from_jsonv() is dangerous, hide it away
test-qobject-input-visitor: Avoid format string ambiguity
libqtest: Simplify qmp_fd_vsend() a bit
qobject: New qobject_from_vjsonf_nofail(), qdict_from_vjsonf_nofail()
qobject: Replace qobject_from_jsonf() by qobject_from_jsonf_nofail()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qobject_from_jsonv() takes ownership of %p arguments. On failure, we
can't generally know whether we failed before or after %p, so
ownership becomes indeterminate. To avoid leaks, callers passing %p
must terminate on error, e.g. by passing &error_abort. Trap for the
unwary; document and give the function internal linkage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-11-armbru@redhat.com>
Every printf()-like function sooner or later needs its vprintf()-like
buddy. The next commit will need qobject_from_jsonf_nofail()'s buddy,
and qdict_from_jsonf_nofail()'s buddy will be used later in this
series. Add both.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-8-armbru@redhat.com>
Commit ab45015a96 "qobject: Let qobject_from_jsonf() fail instead of
abort" fails to accomplish its stated aim: the function can still
abort due to its use of &error_abort.
Its rationale for letting it fail is that all remaining users cope
fine with failure. Well, they're just fine with aborting, too; it's
what they do on failure.
Simply reverting the broken commit would bring back the unfortunate
asymmetry between qobject_from_jsonf() and qobject_from_jsonv(): one
aborts, the other returns null. So also rename it to
qobject_from_jsonf_nofail().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-7-armbru@redhat.com>
This reinstates commit b008326744,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.
Tests need to be updated to set the serial number with -global instead
of using the -drive option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This reinstates commit eae3bd1eb7,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive option addr was deprecated in QEMU 2.10. It's time to remove
it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This reinstates commit a7aff6dd10,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.
hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Add support for GICv2 virtualization extensions by mapping the necessary
I/O regions and connecting the maintenance IRQ lines.
Declare those additions in the device tree and in the ACPI tables.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-21-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit improve the way the GIC is realized and connected in the
ZynqMP SoC. The security extensions are enabled only if requested in the
machine state. The same goes for the virtualization extensions.
All the GIC to APU CPU(s) IRQ lines are now connected, including FIQ,
vIRQ and vFIQ. The missing CPU to GIC timers IRQ connections are also
added (HYP and SEC timers).
The GIC maintenance IRQs are back-wired to the correct GIC PPIs.
Finally, the MMIO mappings are reworked to take into account the ZynqMP
specifics. The GIC (v)CPU interface is aliased 16 times:
* for the first 0x1000 bytes from 0xf9010000 to 0xf901f000
* for the second 0x1000 bytes from 0xf9020000 to 0xf902f000
Mappings of the virtual interface and virtual CPU interface are mapped
only when virtualization extensions are requested. The
XlnxZynqMPGICRegion struct has been enhanced to be able to catch all
this information.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20180727095421.386-20-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the necessary parts of the virtualization extensions state to the
GIC state. We choose to increase the size of the CPU interfaces state to
add space for the vCPU interfaces (the GIC_NCPU_VCPU macro). This way,
we'll be able to reuse most of the CPU interface code for the vCPUs.
The only exception is the APR value, which is stored in h_apr in the
virtual interface state for vCPUs. This is due to some complications
with the GIC VMState, for which we don't want to break backward
compatibility. APRs being stored in 2D arrays, increasing the second
dimension would lead to some ugly VMState description. To avoid
that, we keep it in h_apr for vCPUs.
The vCPUs are numbered from GIC_NCPU to (GIC_NCPU * 2) - 1. The
`gic_is_vcpu` function help to determine if a given CPU id correspond to
a physical CPU or a virtual one.
For the in-kernel KVM VGIC, since the exposed VGIC does not implement
the virtualization extensions, we report an error if the corresponding
property is set to true.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-6-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a VMSTATE_UINT16_SUB_ARRAY macro to save a uint16_t sub-array in
a VMState.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727095421.386-5-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We set up TLB entries in tlb_set_page_with_attrs(), where we have
some logic for determining whether the TLB entry is considered
to be RAM-backed, and thus has a valid addend field. When we
look at the TLB entry in get_page_addr_code(), we use different
logic for determining whether to treat the page as RAM-backed
and use the addend field. This is confusing, and in fact buggy,
because the code in tlb_set_page_with_attrs() correctly decides
that rom_device memory regions not in romd mode are not RAM-backed,
but the code in get_page_addr_code() thinks they are RAM-backed.
This typically results in "Bad ram pointer" assertion if the
guest tries to execute from such a memory region.
Fix this by making get_page_addr_code() just look at the
TLB_MMIO bit in the code_address field of the TLB, which
tlb_set_page_with_attrs() sets if and only if the addend
field is not valid for code execution.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180713150945.12348-1-peter.maydell@linaro.org
The io_readx() function needs to know whether the load it is
doing is an MMU_DATA_LOAD or an MMU_INST_FETCH, so that it
can pass the right value to the cpu_transaction_failed()
function. Plumb this information through from the softmmu
code.
This is currently not often going to give the wrong answer,
because usually instruction fetches go via get_page_addr_code().
However once we switch over to handling execution from non-RAM by
creating single-insn TBs, the path for an insn fetch to generate
a bus error will be through cpu_ld*_code() and io_readx(),
so without this change we will generate a d-side fault when we
should generate an i-side fault.
We also have to pass the access type via a CPU struct global
down to unassigned_mem_read(), for the benefit of the targets
which still use the cpu_unassigned_access() hook (m68k, mips,
sparc, xtensa).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180710160013.26559-2-peter.maydell@linaro.org
The differences from ARMv7-M NVIC are:
* ARMv6-M only supports up to 32 external interrupts
(configurable feature already). The ICTR is reserved.
* Active Bit Register is reserved.
* ARMv6-M supports 4 priority levels against 256 in ARMv7-M.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because we need to make sure the pmem kind memory data is synced
after migration, we choose to call pmem_persist() when the migration
finish. This will make sure the data of pmem is safe and will not
lose if power is off.
Signed-off-by: Junyan He <junyan.he@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Guest writes to vNVDIMM labels are intercepted and performed on the
backend by QEMU. When the backend is a real persistent memort, QEMU
needs to take proper operations to ensure its write persistence on the
persistent memory. Otherwise, a host power failure may result in the
loss of guest label configurations.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When QEMU emulates vNVDIMM labels and migrates vNVDIMM devices, it
needs to know whether the backend storage is a real persistent memory,
in order to decide whether special operations should be performed to
ensure the data persistence.
This boolean option 'pmem' allows users to specify whether the backend
storage of memory-backend-file is a real persistent memory. If
'pmem=on', QEMU will set the flag RAM_PMEM in the RAM block of the
corresponding memory region. If 'pmem' is set while lack of libpmem
support, a error is generated.
Signed-off-by: Junyan He <junyan.he@intel.com>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As more flag parameters besides the existing 'share' are going to be
added to following functions
memory_region_init_ram_from_file
qemu_ram_alloc_from_fd
qemu_ram_alloc_from_file
let's switch them to use the 'flags' parameters so as to ease future
flag additions.
The existing 'share' flag is converted to the RAM_SHARED bit in ram_flags,
and other flag bits are ignored by above functions right now.
Signed-off-by: Junyan He <junyan.he@intel.com>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We need to use these flags in other files rather than just in exec.c,
For example, RAM_SHARED should be used when create a ram block from file.
We expose them the exec/memory.h
Signed-off-by: Junyan He <junyan.he@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.
Before that, valgrind points out bad memory write to console
surface. The VGA code is not aware that virtio-gpu got a message
surface scanout when the display is disabled. Let's reset VGA graphic
mode when it is the case, so that a new display surface is created
when doing further VGA operations.
https://bugs.launchpad.net/qemu/+bug/1784900/
Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Message-id: 20180803153235.4134-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
BDRV_REQ_MAY_UNMAP in a write_zeroes request does not only allow the
driver to unmap the blocks, but it actively requests that the blocks be
unmapped afterwards if at all possible.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
MSR_SMI_COUNT started being migrated in QEMU 2.12. Do not migrate it
on older machine types, or the subsection causes a load failure for
guests that use SMM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qstring_from_substr() parameters @start and @end are of type int.
blkdebug_parse_filename(), blkverify_parse_filename(), nbd_parse_uri(),
and qstring_from_str() pass @end values of type size_t or ptrdiff_t.
Values exceeding INT_MAX get truncated, with possibly disastrous
results.
Such huge substrings seem unlikely, but we found one in a core dump,
where "info tlb" executed via QMP's human-monitor-command apparently
produced 35 GiB of output.
Fix by changing the parameters size_t.
Signed-off-by: liujunjie <liujunjie23@huawei.com>
Message-Id: <20180724134339.17832-1-liujunjie23@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Calling qcrypto_init ensures that all relevant initialization is
done. In particular this honours the debugging settings and thread
settings.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
@cur_mon is null unless the main thread is running monitor code, either
HMP code within monitor_read(), or QMP code within
monitor_qmp_dispatch().
Use of @cur_mon outside the main thread is therefore unsafe.
Most of its uses are in monitor command handlers. These run in the main
thread.
However, there are also uses hiding elsewhere, such as in
error_vprintf(), and thus error_report(), making these functions unsafe
outside the main thread. No such unsafe uses are known at this time.
Regardless, this is an unnecessary trap. It's an ancient trap, though.
More recently, commit cf869d5317 "qmp: support out-of-band (oob)
execution" spiced things up: the monitor I/O thread assigns to @cur_mon
when executing commands out-of-band. Having two threads save, set and
restore @cur_mon without synchronization is definitely unsafe. We can
end up with @cur_mon null while the main thread runs monitor code, or
non-null while it runs non-monitor code.
We could fix this by making the I/O thread not mess with @cur_mon, but
that would leave the trap armed and ready.
Instead, make @cur_mon thread-local. It's now reliably null unless the
thread is running monitor code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[peterx: update subject and commit message written by Markus]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180720033451.32710-1-peterx@redhat.com>
aux_create_slave() calls qdev_init_nofail() which in turn "realizes"
the corresponding object. This is unlike qdev_create(), and it is wrong
because qdev_init_nofail() must not be called from an instance_init
function. Move qdev_init_nofail() and the subsequent aux_map_slave into
the caller's realize function.
There are two more bugs that needs to be fixed here, too, where the
objects are created but not added as children. Therefore when
you call object_unparent on them, nothing happens.
In particular dpcd and edid give you an infinite loop in bus_unparent,
because device_unparent is not called and does not remove them from
the list of devices on the bus.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-17-git-send-email-thuth@redhat.com
[thuth: Added Paolo's fixup for the dpcd and edid unparenting]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of functions are initializing an object and attach it immediately
afterwards to the system bus. Provide a common function for this, which
also uses object_initialize_child() to make sure that the reference
counter is correctly initialized to 1 afterwards.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1531745974-17187-3-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of code is using the object_initialize() function followed by a call
to object_property_add_child() to add the newly initialized object as a child
of the current object. Both functions increase the reference counter of the
new object, but many spots that call these two functions then forget to drop
one of the superfluous references. So the newly created object is often not
cleaned up correctly when the parent is destroyed. In the worst case, this
can cause crashes, e.g. because device objects are not correctly removed from
their parent_bus.
Since this is a common pattern between many code spots, let's introduce a
new function that takes care of calling all three required initialization
functions, first object_initialize(), then object_property_add_child() and
finally object_unref(). And since the function does a similar job like
object_new_with_props(), also allow to set additional properties via
varargs, and use user_creatable_complete() to make sure that the functions
can be used similarly.
And while we're at object.h, also fix some copy-n-paste errors in the
comments there ("to store the area" --> "to store the error").
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1531745974-17187-2-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AST2500 SoC family changes the runtime behaviour of the hardware
strapping register (SCU70) to write-1-set/write-1-clear, with
write-1-clear implemented on the "read-only" SoC revision register
(SCU7C). For the the AST2400, the hardware strapping is
runtime-configured with read-modify-write semantics.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20180709143524.17480-1-andrew@aj.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ->pre_plug() callback is invoked before the device is realized. The
->plug() callback is invoked when the device is being realized but
before it is reset.
This patch adds a ->post_plug() callback which is invoked after the
device has been reset. This callback is needed by HotplugHandlers that
need to wait until after ->reset().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180716083732.3347-2-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This matches the types used for bytes in the rest parts of block layer.
In the case of bdrv_co_truncate, new_bytes can be the image size which
probably doesn't fit in a 32 bit int.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Other I/O functions are already using a BdrvChild pointer in the API, so
make discard do the same. It makes it possible to initiate the same
permission checks before doing I/O, and much easier to share the
helper functions for this, which will be added and used by write,
truncate and copy range paths.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit a7aff6dd10.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit eae3bd1eb7.
Reverted to avoid conflicts for geometry options revert.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit b008326744.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Serialized writes should be used in copy-on-write of backup(sync=none)
for image fleecing scheme.
We need to change an assert in bdrv_aligned_pwritev, added in
28de2dcd88. The assert may fail now, because call to
wait_serialising_requests here may become first call to it for this
request with serializing flag set. It occurs if the request is aligned
(otherwise, we should already set serializing flag before calling
bdrv_aligned_pwritev and correspondingly waited for all intersecting
requests). However, for aligned requests, we should not care about
outdating of previously read data, as there no such data. Therefore,
let's just update an assert to not care about aligned requests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pass read flags and write flags separately. This is needed to handle
coming BDRV_REQ_NO_SERIALISING clearly in following patches.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Here two things are fixed:
1. Architecture
On each recursion step, we go to the child of src or dst, only for one
of them. So, it's wrong to create tracked requests for both on each
step. It leads to tracked requests duplication.
2. Wait for serializing requests on write path independently of
BDRV_REQ_NO_SERIALISING
Before commit 9ded4a0114 "backup: Use copy offloading",
BDRV_REQ_NO_SERIALISING was used for only one case: read in
copy-on-write operation during backup. Also, the flag was handled only
on read path (in bdrv_co_preadv and bdrv_aligned_preadv).
After 9ded4a0114, flag is used for not waiting serializing operations
on backup target (in same case of copy-on-write operation). This
behavior change is unsubstantiated and potentially dangerous, let's
drop it and add additional asserts and documentation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit dcf94a23b1 ('block: Don't poll in parent drain callbacks')
removed polling in bdrv_child_cb_drained_begin() on the grounds that the
original bdrv_drain() already will poll and BdrvChildRole.drained_begin
calls must not cause graph changes (and therefore must not call
aio_poll() or the recursion through the graph will break.
This reasoning is correct for calls through bdrv_do_drained_begin().
However, BdrvChildRole.drained_begin is also called when a node that is
already in a drained section (i.e. bdrv_do_drained_begin() has already
returned and therefore can't poll any more) is attached to a new parent.
In this case, we must explicitly poll to have all requests completed
before the drained new child can be attached to the parent.
In bdrv_replace_child_noperm(), we know that we're not inside the
recursion of bdrv_do_drained_begin() because graph changes are not
allowed there, and bdrv_replace_child_noperm() is a graph change. The
call of BdrvChildRole.drained_begin() must therefore be followed by a
BDRV_POLL_WHILE() that waits for the completion of requests.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit b08199c6fb accidentally added a reference to a doc
comment to a nonexistent memory_region_allocate_aux_memory().
This was a leftover from a previous version of the patchset
which defined memory_region_allocate_aux_memory() for
"allocate RAM MemoryRegion and register it for migration"
and left "memory_region_init_ram()" with its original semantics
of "allocate RAM MR but do not register for migration". In
the end we decided on the approach of "memory_region_init_ram()
registers the MR for migration, and memory_region_init_ram_nomigrate()
is a new function which does not", but this comment change
got left in by mistake. Revert that part of the commit.
Reported-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180702130605.13611-1-peter.maydell@linaro.org
The CMSDK timer behaviour is that an interrupt is triggered when the
counter counts down from 1 to 0; however one is not triggered if the
counter is manually set to 0 by a guest write to the counter register.
Currently ptimer can't handle this; add a policy option to allow
a ptimer user to request this behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20180703171044.9503-2-peter.maydell@linaro.org
smmu_iommu_mr() aims at returning the IOMMUMemoryRegion corresponding
to a given sid. The function extracts both the PCIe bus number and
the devfn to return this data. Current computation of devfn is wrong
as it only returns the PCIe function instead of slot | function.
Fixes 32cfd7f39e ("hw/arm/smmuv3: Cache/invalidate config data")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1530775623-32399-1-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the Cadence GEM ethernet device. This also requires us to
expose the plic interrupt lines.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Instead of creating the interrupt in lines with qemu_allocate_irq() use
qdev_init_gpio_in() as this gives us the ability to use the qdev*gpio*()
helpers later on.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine.
We leave the SoC, RAM, device tree and reset/fdt loading as part of the
machine. All the other device creation has been moved to the SoC.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
- qcow2: Use worker threads for compression to improve performance of
'qemu-img convert -W' and compressed backup jobs
- blklogwrites: New filter driver to log write requests to an image in
the dm-log-writes format
- file-posix: Fix image locking during image creation
- crypto: Fix memory leak in error path
- Error out instead of silently truncating node names
-----BEGIN PGP SIGNATURE-----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=z5AC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Use worker threads for compression to improve performance of
'qemu-img convert -W' and compressed backup jobs
- blklogwrites: New filter driver to log write requests to an image in
the dm-log-writes format
- file-posix: Fix image locking during image creation
- crypto: Fix memory leak in error path
- Error out instead of silently truncating node names
# gpg: Signature made Thu 05 Jul 2018 11:24:33 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
file-posix: Unlock FD after creation
file-posix: Fix creation locking
block/blklogwrites: Add an option for the update interval of the log superblock
block/blklogwrites: Add an option for appending to an old log
block/blklogwrites: Change log_sector_size from int64_t to uint64_t
block/crypto: Fix memory leak in create error path
block: Don't silently truncate node names
block: Add blklogwrites
block: Move two block permission constants to the relevant enum
qcow2: add compress threads
qcow2: refactor data compression
qemu-img: allow compressed not-in-order writes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows using the two constants outside of block.c, which will
happen in a subsequent patch.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add _locked version of bdrv_enable_dirty_bitmap, to fix dirty bitmap
migration in the following patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180625165745.25259-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
By using the more specific type, we get fewer downcasts. The
downcasts are safe, but not obviously so, at least not locally.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-24-armbru@redhat.com>
All callers of qmp_build_error_object() duplicate the code to wrap it
in a response object. Replace it by qmp_error_response() that
captures the duplicated code, including error_free().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-23-armbru@redhat.com>
Many uses of qobject_from_jsonf() convert JSON objects. Create new
convenience function qdict_from_jsonf_nofail() that includes the
conversion to QDict. The next few commits will put it to use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-22-armbru@redhat.com>
handle_qmp_command() reports certain errors right away. This is wrong
when OOB is enabled, because the errors can "jump the queue" then, as
the previous commit demonstrates.
To fix, we need to delay errors until dispatch. Do that for semantic
errors, mostly by reverting ill-advised parts of commit cf869d5317
"qmp: support out-of-band (oob) execution". Bonus: doesn't run
qmp_dispatch_check_obj() twice, once in handle_qmp_command(), and
again in do_qmp_dispatch(). That's also due to commit cf869d5317.
The next commit will fix queue jumping for syntax errors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-18-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution"
accidentally made qemu-ga accept and ignore "control". Fix that.
Out-of-band execution in a monitor that doesn't support it now fails
with
{"error": {"class": "GenericError", "desc": "QMP input member 'control' is unexpected"}}
instead of
{"error": {"class": "GenericError", "desc": "Please enable out-of-band first for the session during capabilities negotiation"}}
The old description is suboptimal when out-of-band cannot not be
enabled, or the command doesn't support out-of-band execution.
The new description is a bit unspecific, but it'll do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-12-armbru@redhat.com>