bcdcpsgn.: Decimal copy sign. Given two registers vra and vrb, it
copies the vra value with vrb sign to the result register vrt.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bcdctsq.: Decimal convert to signed quadword. It is possible to
convert packed decimal values to signed quadwords.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bcdcfsq.: Decimal convert from signed quadword. It is not possible
to convert values less than -10^31-1 or greater than 10^31-1 to be
represented in packed decimal format.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
[dwg: Corrected constant which should be 10^16-1 but was 10^17-1]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
stxsd: Store VSX Scalar Dword
stxssp: Store VSX Scalar SP
Moreover, DQ-Form/DS-FORM instructions shares the same primary
opcode(0x3D). For DQ-FORM bits 29:31 are used, for DS-FORM bits 30:31
are used. Common routine to decode primary opcode(0x3D) -
ds-form/dq-form instructions is required.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
lxsd: Load VSX Scalar Dword
lxssp: Load VSX Scalar Single
Moreover, DS-Form instructions shares the same primary opcode, bits
30:31 are used to decode the instruction. Use a common routine to decode
primary opcode(0x39) - ds-form instructions and branch-out depending on
bits 30:31.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- xscmpodp & xscmpudp are missing flags reset.
- In xscmpodp, VXCC should be set only if VE is 0 for signalling NaN case
and VXCC should be set by explicitly checking for quiet NaN case.
- Comparison is being done only if the operands are not NaNs. However as
per ISA, it should be done even when operands are NaNs.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add _BIT to CRF_[GT,LT,EQ_SO] and introduce CRF_[GT,LT,EQ,SO] for usage
without shifts in the code. This would simplify the code.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move instruction decode helpers to target-ppc/internal.h so that some
of these can be used from outside of translate.c. This movement also
helps to get rid of some duplicate helpers from target-ppc/fpu_helper.c.
Suggested-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ldl_p has a signed return type so assigning it to uint64_t implicitly
sign-extends the value. This results in devices with min_access_size = 8
seeing unexpected values passed to their write handlers.
Example: guest performs a 32-bit write of 0x80000000 to an mmio region
and the handler receives 0xFFFFFFFF80000000 in its value argument.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-Id: <1485440557-10384-1-git-send-email-lprosek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Turn Chardev into Object.
qemu_chr_alloc() is replaced by the qemu_chardev_new() constructor. It
will call qemu_char_open() to open/intialize the chardev with the
ChardevCommon *backend settings.
The CharDriver::create() callback is turned into a ChardevClass::open()
which is called from the newly introduced qemu_chardev_open().
"chardev-gdb" and "chardev-hci" are internal chardev and aren't
creatable directly with -chardev. Use a new internal flag to disable
them. We may want to use TYPE_USER_CREATABLE interface instead, or
perhaps allow -chardev usage.
Although in general we keep typename and macros private, unless the type
is being used by some other file, in this patch, all types and common
helper macros for qemu-char.c are in char.h. This is to help transition
now (some types must be declared early, while some aren't shared) and
when splitting in several units. This is to be improved later.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vc_chr_write() is more appropriate than _puts() since no newline is
appended, even though it's not used only as a callback.
Keep "qemu_chr_parse" prefix, most chardev parse functions use this
prefix atm.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of registering a vc handler to allocate the Gtk VC Chardev,
overwrite the console.c char driver.
A later patch, when switching to QOM, will register a default console vc
QOM class if none has been registered before.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set errp to report errors up to the right monitor.
Use error_append_hint() to give hints about parameters on !qmp monitors,
instead of a direct fprintf() call.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the types to follow the name of the chardev kind.
- socket: TCPChardev -> SocketChardev
- udp: NetChardev -> UdpChardev
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pick a uniform chardev type name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use common allocator for CharDriverState.
Rename the now untouched parent field.
The casts added are temporary, they are replaced with QOM type-safe
macros in a later patch in this series.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a single allocation for CharDriverState, this avoids extra
allocations & pointers, and is a step towards more object-oriented
CharDriver.
Gtk console is a bit peculiar, gd_vc_chr_set_echo() used to have a
temporary VirtualConsole to save the echo bit. Instead now, we consider
whether vcd->console is set or not, and restore the echo bit saved in
VCDriverState when calling gd_vc_vte_init().
The casts added are temporary, they are replaced with QOM type-safe
macros in a later patch in this series.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a feature flag rather than a structure field for "replay".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows to remove the "is_mux" field from CharDriverState.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This shortens the code a bit.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes the code more declarative, and avoids duplicating the
information on all instances.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Number and kinds of backends is known at compile-time, use a fixed-sized
static array to simplify iterations & lookups.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to allocate & copy fields, let's use static const struct instead.
Add an alias field to the CharDriver structure to cover the cases where
we previously registered a driver twice under two names.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I am pretty sure that's the word Fabrice Bellard intended to write.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Available since commit db418a0a7e
(October 2011, qemu 1.0)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
test.char.exe fails to link:
qemu-char.o: In function `win_chr_free':
/home/elmarco/src/qemu/qemu-char.c:2149: undefined reference to `qemu_del_polling_cb'
/home/elmarco/src/qemu/qemu-char.c:2151: undefined reference to `qemu_del_polling_cb'
qemu-char.o: In function `win_stdio_thread':
/home/elmarco/src/qemu/qemu-char.c:2568: undefined reference to `qemu_del_wait_object'
qemu-char.o: In function `qemu_chr_open_stdio':
/home/elmarco/src/qemu/qemu-char.c:2661: undefined reference to `qemu_add_wait_object'
/home/elmarco/src/qemu/qemu-char.c:2646: undefined reference to
`qemu_add_wait_object'
...
It needs main-loop.o symbols, among others. Linking with
$(test-block-obj-y) brings what's necessary. We could try to eventually
strip to the minimum if needed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit f57b4b5f moved qemu_iscsi_opts into vl.c. This
made them invisible for qemu-img, qemu-nbd etc.
Fixes: f57b4b5fb1
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1485262161-18543-1-git-send-email-pl@kamp.de>
[Drop useless #ifdef. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-Id: <1484921496-11257-4-git-send-email-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes timekeeping of x86-64 Darwin/OS X/macOS guests when using KVM.
Darwin/OS X/macOS for x86-64 uses the TSC for timekeeping; it normally calibrates this by querying various clock frequency scaling MSRs. Details depend on the exact CPU model detected. The local APIC timer frequency is extracted from (EFI) firmware.
This is problematic in the presence of virtualisation, as the MSRs in question are typically not handled by the hypervisor. VMWare (Fusion) advertises TSC and APIC frequency via a custom 0x40000010 CPUID leaf, in the eax and ebx registers respectively. This is documented at https://lwn.net/Articles/301888/ among other places.
Darwin/OS X/macOS looks for the generic 0x40000000 hypervisor leaf, and if this indicates via eax that leaf 0x40000010 might be available, that is in turn queried for the two frequencies.
This adds a CPU option "vmware-cpuid-freq" to enable the same behaviour when running Qemu with KVM acceleration, if the KVM TSC frequency can be determined, and it is stable. (invtsc or user-specified) The virtualised APIC bus cycle is hardcoded to 1GHz in KVM, so ebx of the CPUID leaf is also hardcoded to this value.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-Id: <1484921496-11257-2-git-send-email-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can get the maximum number of bytes for a single I/O transfer
from the BLKSECTGET ioctl, but we only perform this for block
devices. scsi-generic devices are represented as character devices,
and so do not issue this today. Update this, so that virtio-scsi
devices using the scsi-generic interface can return the same data.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170120162527.66075-4-farman@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 6f6071745b ("raw-posix: Fetch max sectors for host block device")
introduced a routine to call the kernel BLKSECTGET ioctl, which stores the
result back to user space. However, the size of the data returned depends
on the routine handling the ioctl. The (compat_)blkdev_ioctl returns a
short, while sg_ioctl returns an int. Thus, on big-endian systems, we can
find ourselves accidentally shifting the result to a much larger value.
(On s390x, a short is 16 bits while an int is 32 bits.)
Also, the two ioctl handlers return values in different scales (block
returns sectors, while sg returns bytes), so some tweaking of the outputs
is required such that hdev_get_max_transfer_length returns a value in a
consistent set of units.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170120162527.66075-3-farman@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running with debug enabled, the scsi-generic cdb that is
dumped skips byte 0 of the command, which is the opcode. This
makes identifying which command is being issued/completed a
little difficult. Example:
0x00 0x00 0x01 0x00 0x00
scsi-generic: scsi_read_data 0x0
scsi-generic: Data ready tag=0x0 len=164
scsi-generic: scsi_read_data 0x0
scsi-generic: Command complete 0x0x10a42c60 tag=0x0 status=0
Improve this by adding a message prior to the loop, similar to
what exists for scsi-disk. Clean up a few other messages to be
more explicit of what is being represented. Example:
scsi-generic: Command: data=0x12 0x00 0x00 0x01 0x00 0x00
scsi-generic: scsi_read_data tag=0x0
scsi-generic: Data ready tag=0x0 len=164
scsi-generic: scsi_read_data tag=0x0
scsi-generic: Command complete 0x0x10a452d0 tag=0x0 status=0
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170120162527.66075-2-farman@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that CPUs show up in the help text of "-device ?",
we should group them into an appropriate category.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1484917276-7107-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nb_cls_shrunk in iscsi_allocmap_update can become -1 if the
request starts and ends within the same cluster. This results
in passing -1 to bitmap_set and bitmap_clear and they don't
handle negative values properly. In the end this leads to data
corruption.
Fixes: e1123a3b40
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1484579832-18589-1-git-send-email-pl@kamp.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The generic edk2 SMM infrastructure prefers
EFI_SMM_CONTROL2_PROTOCOL.Trigger() to inject an SMI on each processor. If
Trigger() only brings the current processor into SMM, then edk2 handles it
in the following ways:
(1) If Trigger() is executed by the BSP (which is guaranteed before
ExitBootServices(), but is not necessarily true at runtime), then:
(a) If edk2 has been configured for "traditional" SMM synchronization,
then the BSP sends directed SMIs to the APs with APIC delivery,
bringing them into SMM individually. Then the BSP runs the SMI
handler / dispatcher.
(b) If edk2 has been configured for "relaxed" SMM synchronization,
then the APs that are not already in SMM are not brought in, and
the BSP runs the SMI handler / dispatcher.
(2) If Trigger() is executed by an AP (which is possible after
ExitBootServices(), and can be forced e.g. by "taskset -c 1
efibootmgr"), then the AP in question brings in the BSP with a
directed SMI, and the BSP runs the SMI handler / dispatcher.
The smaller problem with (1a) and (2) is that the BSP and AP
synchronization is slow. For example, the "taskset -c 1 efibootmgr"
command from (2) can take more than 3 seconds to complete, because
efibootmgr accesses non-volatile UEFI variables intensively.
The larger problem is that QEMU's current behavior diverges from the
behavior usually seen on physical hardware, and that keeps exposing
obscure corner cases, race conditions and other instabilities in edk2,
which generally expects / prefers a software SMI to affect all CPUs at
once.
Therefore introduce the "broadcast SMI" feature that causes QEMU to inject
the SMI on all VCPUs.
While the original posting of this patch
<http://lists.nongnu.org/archive/html/qemu-devel/2015-10/msg05658.html>
only intended to speed up (2), based on our recent "stress testing" of SMM
this patch actually provides functional improvements.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20170126014416.11211-3-lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce the following fw_cfg files:
- "etc/smi/supported-features": a little endian uint64_t feature bitmap,
presenting the features known by the host to the guest. Read-only for
the guest.
The content of this file will be determined via bit-granularity ICH9-LPC
device properties, to be introduced later. For now, the bitmask is left
zeroed. The bits will be set from machine type compat properties and on
the QEMU command line, hence this file is not migrated.
- "etc/smi/requested-features": a little endian uint64_t feature bitmap,
representing the features the guest would like to request. Read-write
for the guest.
The guest can freely (re)write this file, it has no direct consequence.
Initial value is zero. A nonzero value causes the SMI-related fw_cfg
files and fields that are under guest influence to be migrated.
- "etc/smi/features-ok": contains a uint8_t value, and it is read-only for
the guest. When the guest selects the associated fw_cfg key, the guest
features are validated against the host features. In case of error, the
negotiation doesn't proceed, and the "features-ok" file remains zero. In
case of success, the "features-ok" file becomes (uint8_t)1, and the
negotiated features are locked down internally (to which no further
changes are possible until reset).
The initial value is zero. A nonzero value causes the SMI-related
fw_cfg files and fields that are under guest influence to be migrated.
The C-language fields backing the "supported-features" and
"requested-features" files are uint8_t arrays. This is because they carry
guest-side representation (our choice is little endian), while
VMSTATE_UINT64() assumes / implies host-side endianness for any uint64_t
fields. If we migrate a guest between hosts with different endiannesses
(which is possible with TCG), then the host-side value is preserved, and
the host-side representation is translated. This would be visible to the
guest through fw_cfg, unless we used plain byte arrays. So we do.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20170126014416.11211-2-lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adding one more option "-f" for "info mtree" to dump the flat views of
all the address spaces.
This will be useful to debug the memory rendering logic, also it'll be
much easier with it to know what memory region is handling what address
range.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1484556005-29701-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We were dumping RW bits for each memory region, that might be confusing.
It'll make more sense to dump the memory region type directly rather
than the RW bits since that's how the bits are derived.
Meanwhile, with some slight cleanup in the function.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1484556005-29701-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements saving/restoring of static apic_delivered variable.
v8: saving static variable only for one of the APICs
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170126123429.5412.94368.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes replaying the exception when TB cache is full.
It breaks cpu loop execution through setting exception_index
to process such queued work as TB flush.
v8: moved setting of exeption_index to tb_gen_code
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170126123418.5412.33815.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements initial vmstate creation or loading at the start
of record/replay. It is needed for rewinding the execution in the replay mode.
v4 changes:
- snapshots are not created by default anymore
v3 changes:
- added rrsnapshot option
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170124071746.4572.61449.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jose Ricardo Ziviani