Until recently all scsi commands sent to scsi-disk did either transfer
data or finished instantly. The correct implementation of
SYNCRONIZE_CACHE changed the picture though, and usb-storage needs
a fix to handle that case correctly.
Put status word into device state, fill it in command_complete, have
usb_msd_send_status just send it out.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb_msd_send_status can be called from different code paths, move the
debug message into the function to make sure it is printed
unconditionally.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some USB drivers, for example USBASPI.SYS, will skip different type of
device which has same VID/PID. The following patch helps preventing
usb-msd being skipped by the driver.
Signed-off-by: Roy Tam <roytam@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This only requires changes in two places: in SCSIBus, we need to look
for a free LUN if somebody creates a device with a pre-existing scsi-id
but the default LUN (-1, meaning "search for a free spot"); in vSCSI,
we need to actually parse the LUN according to the SCSI spec.
For vSCSI, max_target/max_lun are set according to the logical unit
addressing format in SAM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a usb packet is canceled we need to check whenever we actually have
a scsi request in flight before we try to cancel it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For now, this just protects against programming errors like having the
same drive back multiple non-qdev devices, or untimely bdrv_delete().
Later commits will add other interesting uses.
While there, rename BlockDriverState member peer to dev, bdrv_attach()
to bdrv_attach_dev(), bdrv_detach() to bdrv_detach_dev(), and
bdrv_get_attached() to bdrv_get_attached_dev().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Right now the CDB is not passed to the SCSIBus until scsi_req_enqueue.
Passing it to scsi_req_new will let scsi_req_new dispatch common requests
through different reqops.
Moving the memcpy to scsi_req_new is a hack that will go away as
soon as scsi_req_new will also take care of the parsing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Zap data pointer from USBPacket, add a QEMUIOVector instead.
Add a bunch of helper functions to manage USBPacket data.
Switch over users to the new interface.
Note that USBPacket->len was used for two purposes: First to
pass in the buffer size and second to return the number of
transfered bytes or the status code on async transfers. There
is a new result variable for the latter. A new status code
was added to catch uninitialized result.
Nobody creates iovecs with more than one element (yet).
Some users are (temporarely) limited to iovecs with a single
element to keep the patch size as small as possible.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Correct typos of "licenced" to "licensed".
Reviewed-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de>
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
'tag' is just an abstraction to identify the command
from the driver. So we should make that explicit by
replacing 'tag' with a driver-defined pointer 'hba_private'.
This saves the lookup for driver handling several commands
in parallel.
'tag' is still being kept for tracing purposes.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It needs to be a qdev property, because it belongs to the drive's
guest part. Precedence: commit a0fef654 and 6ced55a5.
Bonus: info qtree now shows the serial number.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
... and remove some SCSIDevice variables or fields that now become unused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the common part of scsi-disk.c and scsi-generic.c to the SCSI layer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is for when the request must be dropped in the void,
but still memory should be freed. To this end, the devices
register a second callback in SCSIBusOps.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently the SCSIRequest structure is abstracted away and cannot accessed
directly from the driver. This requires the handler to do a lookup on
an abstract 'tag' which identifies the SCSIRequest structure.
With this patch the SCSIRequest structure is exposed to the driver. This
allows use to use it directly as an argument to the SCSIDeviceInfo
callback functions and remove the lookup.
A new callback function 'alloc_req' is introduced matching 'free
req'; unref'ing to free up resources after use is moved into the
scsi_command_complete callbacks.
This temporarily introduces a leak of requests that are cancelled,
when they are removed from the queue and not from the driver. This
is fixed later by introducing scsi_req_cancel. That patch in turn
depends on this one, because the argument to scsi_req_cancel is a
SCSIRequest.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are more operations than a SCSI bus can handle, besides completing
commands. One example, which this series will introduce, is cleaning up
after a request is cancelled.
More long term, a "SCSI bus" can represent the LUNs attached to a
target; in this case, while all commands will ultimately reach a logical
unit, it is the target who is in charge of answering REPORT LUNs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Remove the cancel callback from the USBPacket struct, move it over
to USBDeviceInfo. Zap usb_defer_packet() which is obsolete now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb_msd_copy_data() may cause a recursive call to
usb_msd_command_complete() which in turn may complete
the packet, setting s->packet to NULL in case it does.
Recheck s->packet before calling usb_packet_complete()
to fix the double call.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows using the generic usb_generic_handle_packet function from
device code which does ASYNC control requests (such as the linux host
pass through code).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Previously we relied on the .bNumInterfaces, but that won't always be
accurate after the introduction of grouped interfaces.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Initialize scsi_len with zero when starting a new request, so any
stuff leftover from the previous request is cleared out. This may
happen in case the data returned by the scsi command doesn't fit
into the buffer provided by the guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Watch this:
(qemu) drive_add 0 if=none
(qemu) info block
none0: type=hd removable=0 [not inserted]
(qemu) drive_del none0
Segmentation fault (core dumped)
add_init_drive() is confused about drive_init()'s failure modes, and
cleans up when it shouldn't. This leaves the DriveInfo with member
opts dangling. drive_del attempts to free it, and dies.
drive_init() behaves as follows:
* If it created a drive with media, it returns its DriveInfo.
* If it created a drive without media, it clears *fatal_error and
returns NULL.
* If it couldn't create a drive, it sets *fatal_error and returns
NULL.
Of its three callers:
* drive_init_func() is correct.
* usb_msd_init() assumes drive_init() failed when it returns NULL.
This is correct only because it always passes option "file", and
"drive without media" can't happen then.
* add_init_drive() assumes drive_init() failed when it returns NULL.
This is incorrect.
Clean up drive_init() to return NULL on failure and only on failure.
Drop its parameter fatal_error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
USB Mass Storage Devices sometimes have the RMB (removable) bit set in
the SCSI INQUIRY response. Thumbdrives tend to have the bit set whereas
hard disks do not.
Operating systems differentiate between removable devices and fixed
devices. Under Linux, the anaconda installer looks for removable
devices. Under Windows, only fixed devices may have more than one
partition and AutoRun is also affected by the removable bit.
For these reasons, allow USB Mass Storage Devices to override the
removable bit:
qemu -usb
-drive if=none,file=test.img,cache=none,id=disk0
-device usb-storage,drive=disk0,removable=on
The default is off.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
scsi-disk devices may wish to override the removable bit. Add support
for a qdev property on SCSI devices. This is will be used by usb-msd.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The scsi layer may return us more data than the guests wants to have.
Handle this by just ignoring the extra bytes and calling the
{read,write}_data callback to finish the request.
Seen happening in real life with some extended inquiry command.
With this patch applied the linux kernel stops reseting the device
once at boot.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change usb_msd_send_status() to take a pointer to the status packet
instead of writing the status to s->usb_buf which might not point
to the correct location.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add high speed support to the usb mass storage device. With this patch
applied the linux kernel recognises the usb storage device as highspeed
capable device and suggests to connect it to a highspeed port instead of
the uhci. Tested with both uhci and (not-yet submitted) ehci.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch moves setting and clearing the remote_wakeup feature
bit (via USB_REQ_{SET,CLEAR}_FEATURE) to common code. Also
USB_REQ_GET_STATUS handling is moved to common code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds fields to the USBDevice struct for the current
speed (hard-wired to full speed for now) and current device
configuration. Also a init function is added which inializes
these fields. This allows USB_REQ_{GET,SET}_CONFIGURATION
handling to be moved to common code.
For most drivers the conversion is trivial ad they support a single
configuration only anyway. One exception is bluetooth where some
device-specific setup code runs after get/set configuration. The
other is usb-net which actually has two configurations so the
the code to check for the active configuration has been adapted.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Changing block.h or blockdev.h resulted in recompiling most objects.
Move DriveInfo typedef and BlockInterfaceType enum definitions
to qemu-common.h and rearrange blockdev.h use to decrease churn.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Switch tree to lookup-by-name using qemu_find_opts().
Also hook up virtfs options so qemu_find_opts works for them too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann