The expiration timeout must only affect packets that are queued due to
pending ARP resolutions. The old version broke ping e.g.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
No need to update the current time for each packet we send from the
queue. Processing time is comparably short.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Should be uint32_t for IPv4, not int. Also avoid in_addr_t without
proper includes. Fixes build regression on mingw32.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
In the current implementation, if Slirp tries to send an IP packet to a client
with an unknown hardware address, the packet is simply dropped and an ARP
request is sent (if_encap in slirp/slirp.c).
With this patch, Slirp will send the ARP request, re-queue the packet and try
to send it later. The packet is dropped after one second if the ARP reply is
not received.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch adds a simple ARP table in Slirp and also adds handling of
gratuitous ARP requests.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
cppcheck detected two rather strange comments which were not
correctly written as C comments.
They did not cause any harm because they were framed by
#ifdef notdef ... #endif, so they were never compiled.
Fix them nevertheless (we could also remove the unused code).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Avoid warnings like these by wrapping recv():
CC slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'
Remove also casts used to avoid warnings.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Linux 3.0 gained support for unprivileged ICMP ping sockets. Use this
feature to forward guest pings to the outer world. The host admin has to
set the ping_group_range in order to grant access to those sockets. To
allow ping for the users group (GID 100):
echo 100 100 > /proc/sys/net/ipv4/ping_group_range
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Recent smb daemons tend to terminate themselves via a process group
SIGTERM. If the daemon is still in qemu's group by that time, qemu will
die as well. Avoid this by always pushing fork_exec processes into a
group of their own, not just (unused) type 2 execs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of accepting every DHCP/BOOTP and TFTP packet, only invoke the
built-in servers if the target is the virtual host.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This aligns the code to what the documentation claims: Allow everything
but requests that would have to be routed outside of the virtual LAN.
So we need to drop the unneeded IP-level filter, allow TFTP requests,
and add the missing protocol-level filter to ICMP.
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
SLIRP -smb support wants to fork a process and forget about reaping it.
To please it, add a generic service to register a process id and let
QEMU reap it. In the future it could be enhanced to pass a status,
but this would be unused.
With this in place, the SIGCHLD signal handler would not stomp on pclose
anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This was done with:
sed -i '/get_clock\>.*rt_clock/s/get_clock\>/get_clock_ms/' \
$(git grep -l 'get_clock\>.*rt_clock' )
sed -i '/new_timer\>.*rt_clock/s/new_timer\>/new_timer_ms/' \
$(git grep -l 'new_timer\>.*rt_clock' )
after checking that get_clock and new_timer never occur twice
on the same line. There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
make the code compile correctly when DEBUG is activated.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
x.tp_buf was declared as a uint8_t array, but always used as
a char array (which needed a lot of type casts).
The patch includes these changes:
* Fix declaration of x.tp_buf and remove all type casts.
* Use offsetof() to get the offset of x.tp_buf.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since the addition of the slirp member to struct mbuf, the value of
SLIRP_MSIZE and the initialization of m_size have not been correct,
resulting in overrunning the end of the malloc'd buffer in some cases.
Signed-off-by: Bruce Rogers <brogers@novell.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to RFC 1350 (TFTP Revision 2) the mode field can contain any
combination of upper and lower case; also RFC 2349 propagates that the
transfer size option ("tsize") is case in-sensitive too.
Current implementation of embedded TFTP server missed that what does
mess some TFTP clients. Fixed by using STRCASECMP(3) in the required
places.
Signed-off-by: Sergei Gavrikov <sergei.gavrikov@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
Slirp code tries to be smart an avoid data copy by using pointer to
the data. This solution leads to unaligned access, in this case
preq_addr, which is a 32-bit long structure. There is no real point
of avoiding data copy in a such case, as the value itself is smaller
or the same size as a pointer.
The patch replaces pointers to the preq_addr structure by the strcture
itself, and use the address 0.0.0.0 if no address has been requested
(this is not a valid address in such a request). It compares it with
htonl(0L) for correctness reasons, in case a code checker look for such
mistakes. It also uses memcpy() for copying the data, which takes care
of alignement issues.
This fixes an unaligned access on IA64 host while requesting a DHCP
address.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Neither DECLARE_SPRINTF nor BAD_SPRINTF are needed for QEMU.
QEMU won't support systems with missing or bad declarations
for sprintf. The unused code was detected while looking for
functions with missing format checking. Instead of adding
GCC_FMT_ATTR, the unused code was removed.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Haiku has O_BINARY in fcntl.h.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
IEEE 802.3 standard requires Ethernet frames to be at least 64 bytes long.
If it is not the case, they will be considered as runt frames, and may be ignored by netcard and/or OS
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Packets with TTL=1 may be directed to local network (DHCP/DNS servers for example), so don't discard them
This is required by old versions of NetBSD which send DHCP DISCOVER packets with TTL=1
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The previous patches replaced u_int8_t, u_int16_t, u_int32_t, u_int64_t
by standard int types from stdint.h,
so we can now remove their declarations which are no longer needed.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is no need to have a second set of integral types.
Replace them by the standard types from stdint.h.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When available, we'd like to be able to access the DeviceState
when registering a savevm. For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A data structure of type sockaddr_in is allocated from stack but not
properly initialized. This may lead to a failure in the bind() call
later on. Fixed by filling the contents of the structure with zeroes
before using it.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commits 376253ec..731b0364 introduced global variable cur_mon, which
points to the "default monitor" (if any), except during execution of
monitor_read() or monitor_control_read() it points to the monitor from
which we're reading instead (the "current monitor"). Monitor command
handlers run within monitor_read() or monitor_control_read().
Default monitor and current monitor are really separate things, and
squashing them together is confusing and error-prone.
For instance, usb_host_scan() can run both in "info usbhost" and
periodically via usb_host_auto_check(). It prints to cur_mon, which
is what we want in the former case: the monitor executing "info
usbhost". But since that's the default monitor in the latter case, it
periodically spams the default monitor there.
A few places use cur_mon to log stuff to the default monitor. If we
ever log something while cur_mon points to current monitor instead of
default monitor, the log temporarily "jumps" to another monitor.
Whether that can or cannot happen isn't always obvious.
Maybe logging to the default monitor (which may not even exist) is a
bad idea, and we should log to stderr or a logfile instead. But
that's outside the scope of this commit.
Change cur_mon to point to the current monitor. Create new
default_mon to point to the default monitor. Update users of cur_mon
accordingly.
This fixes the periodical spamming of the default monitor by
usb_host_scan(). It also stops "log jumping", should that problem
exist.
Although the value stored to 'r' is used in the enclosing expression,
the value is never actually read from 'r'.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Most of these are obvious NULL-deref bug fixes, for example,
the ones in these files:
block/curl.c
net.c
slirp/misc.c
and the first one in block/vvfat.c.
The others in block/vvfat.c may not lead to an immediate segfault, but I
traced the two schedule_rename(..., strdup(path)) uses, and a failed
strdup would appear to trigger this assertion in handle_renames_and_mkdirs:
assert(commit->path);
The conversion to use qemu_strdup in envlist_to_environ is not technically
needed, but does avoid a theoretical leak in the caller when strdup fails
for one value, but later succeeds in allocating another buffer(plausible,
if one string length is much larger than the others). The caller does
not know the length of the returned list, and as such can only free
pointers until it hits the first NULL. If there are non-NULL pointers
beyond the first, their buffers would be leaked. This one is admittedly
far-fetched.
The two in linux-user/main.c are worth fixing to ensure that an
OOM error is diagnosed up front, rather than letting it provoke some
harder-to-diagnose secondary error, in case of exec failure, or worse, in
case the exec succeeds but with an invalid list of command line options.
However, considering how unlikely it is to encounter a failed strdup early
in main, this isn't a big deal. Note that adding the required uses of
qemu_strdup here and in envlist.c induce link failures because qemu_strdup
is not currently in any library they're linked with. So for now, I've
omitted those changes, as well as the fixes in target-i386/helper.c
and target-sparc/helper.c.
If you'd like to see the above discussion (or anything else)
in the commit log, just let me know and I'll be happy to adjust.
>From 9af42864fd1ea666bd25e2cecfdfae74c20aa8c7 Mon Sep 17 00:00:00 2001
From: Jim Meyering <meyering@redhat.com>
Date: Mon, 8 Feb 2010 18:29:29 +0100
Subject: [PATCH] don't dereference NULL after failed strdup
Handle failing strdup by replacing each use with qemu_strdup,
so as not to dereference NULL or trigger a failing assertion.
* block/curl.c (curl_open): s/\bstrdup\b/qemu_strdup/
* block/vvfat.c (init_directories): Likewise.
(get_cluster_count_for_direntry, check_directory_consistency): Likewise.
* net.c (parse_host_src_port): Likewise.
* slirp/misc.c (fork_exec): Likewise.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to RFC 1350 and RFC 2347, TFTP server should answer RRQ by
either OACK or DATA packet. Qemu's internal TFTP server answers RRQ with
additional options by sending both OACK and DATA packet, thus breaking
the "lock-step" feature of the protocol, and also confuses client.
Proposed solution would be to, in case of OACK packet, wait for ACK
from client and just then start sending data. Attached patch implements
this.
Signed-off-by: Thomas Horsten <thomas@horsten.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a PXE client only wants to find out the size of a file, it will
open the file and then abort the transfer by sending a TFTP ERROR packet.
The ERROR packet should cause qemu to terminate the session. If not,
the sessions will soon run out and cause timeouts in the client.
Also, if a TFTP session already exists with same IP/UDP port, it
should be terminated when a new RRQ is received, instead of creating a
duplicate (which will never be used).
A patch for gPXE to send the ERROR packet is also being submitted to
gPXE. Together they resolve slowness/hanging when booting pxegrub from
qemu's internal TFTP server. The patch from Milan Plzik to return
after sending OACK is also required for a complete fix.
Signed-off-by: Thomas Horsten <thomas@horsten.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
CC slirp/misc.o
cc1: warnings being treated as errors
slirp/misc.c: In function 'fork_exec':
slirp/misc.c:209: error: ignoring return value of 'write', declared with attribute warn_unused_result
make: *** [slirp/misc.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
At least under some mingw compilers slirp networking fails without declaring
these fields packed.
From: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file
descriptors that don't need to be passed to children to stop this misbehaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
460fec67ee introduced a use-after free in slirp.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Starting with commit df7a86ed73,
mingw32 builds result in a compiler warning for dns_addr:
CC slirp/slirp.o
/home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: missing braces around initializer
/home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: (near initialization for ‘dns_addr.S_un’)
Removing the assignment fixes the warning without the need of special code
for mingw32 (and also saves some bytes in the resulting binary).
To fix another potential compiler warning, the missing 'static'
attribute was added.
The same changes were applied to dns_addr_time.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Currently the qemu user-mode networking stack reads the host DNS
configuration (/etc/resolv.conf or the Windows equivalent) only once
when qemu starts. This causes name lookups in the guest to fail if the
host is moved to a different network from which the original DNS servers
are unreachable, a common occurrence when the host is a laptop.
This patch changes the slirp code to read the host DNS configuration on
demand, caching the results for at most 1 second to avoid unnecessary
overhead if name lookups occur in rapid succession. On non-Windows
hosts, /etc/resolv.conf is re-read only if the file has been replaced or
if its size or mtime has changed.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Three problems with our_addr:
- It's determined only once when qemu starts, but the address can change
(just like the DNS configuration can).
- It's supposed to be the IP address of a host network interface, but
there's no guarantee that gethostbyname(gethostname()) actually does
that: the host might be a laptop that has only a loopback interface up,
or the hostname might be localhost.localdomain, etc.
- It's useless at best: get_dns_addr() calls it, there's no reason to
send DNS requests to a different IP address if you're running a DNS
server on the host and resolv.conf points to 127.0.0.1.
These problems are easily solved by removing the code.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Calling gettimeofday() to compute a time interval can cause problems if
the system clock jumps forwards or backwards; replace updtime() with
qemu_get_clock(rt_clock), which calls clock_gettime(CLOCK_MONOTONIC) if
it is available.
Also remove some useless macros.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The UDP emulation code for talk has been commented out since the
beginning of time, and unless someone who runs CU-SeeMe on qemu with
user-mode networking can vouch that the special magic (a) is necessary
and (b) works, let's get rid of the code.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Unless a virtual server address was explicitly defined (which is
impossible with the legacy -net channel format), guestfwd did not
properly forwarded host->guest packets. This patch fixes it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
[ Applies on top of my recently posted slirp series. ]
Allow tftp requests with filenames that do not start with a slash.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Once again this was a long journey to reach the destination: Allow to
instantiate slirp multiple times. But as in the past, the journey was
worthwhile, cleaning up, fixing and enhancing various parts of the user
space network stack along the way.
What is this particular change good for? Multiple slirps instances
allow separated user space networks for guests with multiple NICs. This
is already possible, but without any slirp support for the second
network, ie. without a chance to talk to that network from the host via
IP. We have a legacy guest system here that benefits from this slirp
enhancement, allowing us to run both of its NICs purely over
unprivileged user space IP stacks.
Another benefit of this patch is that it simply removes an artificial
restriction of the configuration space qemu is providing, avoiding
another source of surprises that users may face when playing with
possible setups.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allocate the internal slirp state dynamically and provide and call
slirp_cleanup to properly release it after use. This patch finally
unbreaks slirp release and re-instantiation via host_net_* monitor
commands.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This now also exports the internal state to the slirp users in qemu,
returning it from slirp_init and expecting it along with service
invocations. Additionally provide an opaque value interface for the
callbacks from slirp into the qemu core.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The essence of this patch is to stuff (almost) all global variables of
the slirp stack into the structure Slirp. In this step, we still keep
the structure as global variable, directly accessible by the whole
stack. Changes to the external interface of slirp will be applied in
the following patches.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
link_up is true once slirp is initialized, so these check are really not
required.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid the need for slirp_is_inited by refactoring the protected
slirp_select_* functions. This also avoids the clearing of all fd sets
on select errors.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Drop redundant typecasts in both variants and remove the pointless
round-up in the UNIX version.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, ip_id is always initialized to 0 on slirp startup (despite
the broken attempt to derive it from the clock). This is good for
reproducibility. But it is not preserved across save/restore. This patch
therefore drops the dead initialization code from ip_init and introduces
ip_id to the persistent slirp state.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to prepare re-initialization and multi-instance slirp, factor
out init code that is of global scope and (at least for now) only need
to be run once.
This also fixes the potentially uninitialized use of our_addr in
get_dns_addr.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This changes the filename handling from a static buffer in tftp_session
for the client-provided name + prefix to a dynamically allocated buffer
that keeps the combined path in one place.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Specifically make the filename extraction more readable, and always
report errors back to the client.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The return code of tftp_send_error is not used, drop it. And also make
sure to always terminate the session.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Perform check for set prefix early (if it's not given, tftp is disabled)
and drop redundant second check.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As agreed on the mailing list, there is no interest in keeping the
usually disabled slirp statistics in the tree. So this patch removes
them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
After all its years inside the qemu tree, there is no point in keeping
the dead code paths of slirp. This patch is a first round of removing
usually commented out code parts. More cleanups need to follow (and
maybe finally a proper reindention).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Break out sockstats from the slirp statistics and present them under the
new info category "usernet". This patch also improves the current output
/wrt proper reporting connection source and destination.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Prevent that the users accidentally shoots down dynamic sockets. This
allows to remove looping for removals as there can now only be one
match.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Mark sockets that describe host forwardings. This is required for their
(and only their) proper deletion and for pretty-printing.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This prepares for adding flags to socket.so_state that must not be
removed during the lifetime of a socket.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Extend the hostfwd rule format so that the user can specify on which
host interface qemu should listen for incoming connections. If omitted,
binding will takes place against all interfaces.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For UDP host forwardings, fport is not stable, every outgoing packet of
the redirection can modify it. Use getsockname instead to look up the
port that is actually used on the host side.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With the internal IP configuration made more flexible, we can now
enhance the user interface. This patch adds a number of new options to
"-net user": net (address and mask), host, dhcpstart, dns and smbserver.
It also renames "redir" to "hostfwd" and "channel" to "guestfwd" in
order to (hopefully) clarify their meanings. The format of guestfwd is
extended so that the user can define not only the port but also the
virtual server's IP address the forwarding starts from.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The user mode IP stack is currently only minimally configurable /wrt to
its virtual IP addresses. This is unfortunate if some guest has a fixed
idea of which IP addresses to use.
Therefore this patch prepares the stack for fully configurable IP
addresses and masks. The user interface and default addresses remain
untouched in this step, they will be enhanced in the following patch.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
So far a couple of slirp-related parameters were expressed via
stand-alone command line options. This it inconsistent and unintuitive.
Moreover, it prevents both dynamically reconfigured (host_net_add/
delete) and multi-instance slirp.
This patch refactors the configuration by turning -smb, -redir, -tftp
and -bootp as well as -net channel into options of "-net user". The old
stand-alone command line options are still processed, but no longer
advertised. This allows smooth migration of management applications to
to the new syntax and also the extension of that syntax later in this
series.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 1c6ed9f337.
It's redundant to slirp statistics, which are going to be split up /
reworked later on.
Conflicts:
monitor.c
net.c
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The socket faddr/fport is already updated a few lines below, so these
are completely redundant.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Work around buffer and ioctlsocket argument type signedness problems
Suppress a prototype which is unused on mingw32
Expand a macro to avoid warnings from some GCC versions
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch reorders the initialization of slirp itself as well as its
associated features smb and redirection. So far the first reference to
slirp triggered the initialization, independent of the actual -net user
option which may carry additional parameters. Now we save any request to
add a smb export or some redirections until the actual initialization of
the stack. This also allows to move a few parameters that were passed
via global variable into the argument list of net_slirp_init.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
In case you're wondering what connections exactly you have open
or maybe redir'ed in the past, you can't really find out from qemu
right now.
This patch enables you to see all current connections the host
only networking holds open, so you can kill them using the previous
patch.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Using the new host_net_redir command you can easily create redirections
on the fly while your VM is running.
While that's great, it's missing the removal of redirections, in case you
want to have a port closed again at a later point in time.
This patch adds support for removal of redirections.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In case a client restarts a DHCP recovery without releasing its old
address, reassign the same address to prevent consuming free addresses
and moving away from the standard client address.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This adds proper handling of the ciaddr field as well as the "Requested
IP Address" option to slirp's DHCP server. If the client requests an
invalid or used IP, a NAK reply is sent, if it requests a specific but
valid IP, this is now respected.
NAK'ing invalid IPs is specifically useful when changing the slirp IP
range via '-net user,ip=...' while the client saved its previously used
address and tries to reacquire it. Now this will be NAK'ed and the
client will start a new discovery round.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7198 c046a42c-6fe2-441c-8c8c-71466251a162
We want to globally define WIN_LEAN_AND_MEAN and WINVER to particular values so
let's do it in OS_CFLAGS.
Then, we can pepper in windows.h includes where using #includes that require it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6783 c046a42c-6fe2-441c-8c8c-71466251a162
Refactor the monitor API and prepare it for decoupled terminals:
term_print functions are renamed to monitor_* and all monitor services
gain a new parameter (mon) that will once refer to the monitor instance
the output is supposed to appear on. However, the argument remains
unused for now. All monitor command callbacks are also extended by a mon
parameter so that command handlers are able to pass an appropriate
reference to monitor output services.
For the case that monitor outputs so far happen without clearly
identifiable context, the global variable cur_mon is introduced that
shall once provide a pointer either to the current active monitor (while
processing commands) or to the default one. On the mid or long term,
those use case will be obsoleted so that this variable can be removed
again.
Due to the broad usage of the monitor interface, this patch mostly deals
with converting users of the monitor API. A few of them are already
extended to pass 'mon' from the command handler further down to internal
functions that invoke monitor_printf.
At this chance, monitor-related prototypes are moved from console.h to
a new monitor.h. The same is done for the readline API.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
Fix SIGSEGV crash in networking code (bug was introduced in r6288).
Thanks to Gleb Natapov for finding this fix.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6545 c046a42c-6fe2-441c-8c8c-71466251a162
According to the FSF, the 4-clause BSD license, which slirp is covered under,
is not compatible with the GPL or LGPL[1].
[1] http://www.fsf.org/licensing/licenses/index_html#GPLIncompatibleLicenses
There are three declared copyright holders in slirp that use the 4-clause
BSD license, the Regents of UC Berkley, Danny Gasparovski, and Kelly Price.
Below are the appropriate permissions to remove the advertise clause from slirp
from each party.
Special thanks go to Richard Fontana from Red Hat for contacting all of the
necessary authors to resolve this issue!
Regents of UC Berkley:
From ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change
July 22, 1999
To All Licensees, Distributors of Any Version of BSD:
As you know, certain of the Berkeley Software Distribution ("BSD") source
code files require that further distributions of products containing all or
portions of the software, acknowledge within their advertising materials
that such products contain software developed by UC Berkeley and its
contributors.
Specifically, the provision reads:
" * 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors."
Effective immediately, licensees and distributors are no longer required to
include the acknowledgement within advertising materials. Accordingly, the
foregoing paragraph of those BSD Unix files containing it is hereby deleted
in its entirety.
William Hoskins
Director, Office of Technology Licensing
University of California, Berkeley
Danny Gasparovski:
Subject: RE: Slirp license
Date: Thu, 8 Jan 2009 10:51:00 +1100
From: "Gasparovski, Daniel" <Daniel.Gasparovski@ato.gov.au>
To: "Richard Fontana" <rfontana@redhat.com>
Hi Richard,
I have no objection to having Slirp code in QEMU be licensed under the
3-clause BSD license.
Thanks for taking the effort to consult me about this.
Dan ...
Kelly Price:
Date: Thu, 8 Jan 2009 19:38:56 -0500
From: "Kelly Price" <strredwolf@gmail.com>
To: "Richard Fontana" <rfontana@redhat.com>
Subject: Re: Slirp license
Thanks for contacting me, Richard. I'm glad you were able to find
Dan, as I've been "keeping the light on" for Slirp. I have no use for
it now, and I have little time for it (now holding onto Keenspot's
Comic Genesis and having a regular US state government position). If
Dan would like to return to the project, I'd love to give it back to
him.
As for copyright, I don't own all of it. Dan does, so I will defer to
him. Any of my patches I will gladly license to the 3-part BSD
license. My interest in re-licensing was because we didn't have ready
info to contact Dan. If Dan would like to port Slirp back out of
QEMU, a lot of us 64-bit users would be grateful.
Feel free to share this email address with Dan. I will be glad to
effect a transfer of the project to him and Mr. Bellard of the QEMU
project.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6451 c046a42c-6fe2-441c-8c8c-71466251a162
Windows Vista drops unicast dhcp replies to its yet-unconfigured address,
so use a broadcast address. This behaviour is allowed by the RFC.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6430 c046a42c-6fe2-441c-8c8c-71466251a162
The emulated network cards in QEMU allows local users to execute arbitrary
code by writing Ethernet frames with a size larger than the slirp's default
MTU, which triggers a heap-based buffer overflow in the slirp library.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5920 c046a42c-6fe2-441c-8c8c-71466251a162
Vectored IO APIs will require some sort of vector argument. It makes sense to
use struct iovec and just define it globally for Windows.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5889 c046a42c-6fe2-441c-8c8c-71466251a162
Right now, we sprinkle #if defined(QEMU_IMG) && defined(QEMU_NBD) all over the
code. It's ugly and causes us to have to build multiple object files for
linking against qemu and the tools.
This patch introduces a new file, qemu-tool.c which contains enough for
qemu-img, qemu-nbd, and QEMU to all share the same objects.
This also required getting qemu-nbd to be a bit more Windows friendly. I also
changed the Windows block-raw to use normal IO instead of overlapping IO since
we don't actually do AIO yet on Windows. I changed the various #if 0's to
#if WIN32_AIO to make it easier for someone to eventually fix AIO on Windows.
After this patch, there are no longer any #ifdef's related to qemu-img and
qemu-nbd.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5226 c046a42c-6fe2-441c-8c8c-71466251a162
At the same time remove a bogus test (tested by Jason Wessel).
Quiet some gcc4 warnings from slirp compilation.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4402 c046a42c-6fe2-441c-8c8c-71466251a162
Jan Kiszka