Commit Graph

214 Commits

Author SHA1 Message Date
Philippe Mathieu-Daudé 72cd500b72 linux-user/sh4: fix incorrect memory write
not hit since 2009! :)

linux-user/elfload.c:1102:20: warning: Out of bound memory access (access exceeds upper limit of memory block)
        (*regs[i]) = tswap32(env->gregs[i]);
        ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~

Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-31 13:06:39 +03:00
Peter Maydell 82991bed73 linux-user: Put PPC AT_IGNOREPPC auxv entries in the right place
The 32-bit PPC auxv is a bit complicated because in the
mists of time it used to be 16-aligned rather than directly
after the environment. Older glibc versions had code to
try to probe for whether it needed alignment or not:
https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/powerpc/dl-sysdep.c;hb=e84eabb3871c9b39e59323bf3f6b98c2ca9d1cd0
and the kernel has code which puts some magic entries at
the bottom to ensure that the alignment probe fails:
http://elixir.free-electrons.com/linux/latest/source/arch/powerpc/include/asm/elf.h#L158

QEMU has similar code too, but it was broken by commit
7c4ee5bcc8, which changed elfload.c from filling in
the auxv starting at the highest address and working down
to starting at the lowest address and working up. This
means that the ARCH_DLINFO hook must now be invoked first
rather than last, and the entries in it for PPC must
be reversed so that the magic AT_IGNOREPPC entries come
at the lowest address in the auxv as they should.

The effect of this was that if running a guest binary that
used an old glibc with the alignment probing the guest ld.so
code would segfault if the size of the guest environment and
argv happened to put the auxv at an address that triggered
the alignment code in the guest glibc.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Richard Henderson <rth@twiddle.net>
Message-id: 1498582198-6649-1-git-send-email-peter.maydell@linaro.org
2017-06-29 10:25:26 +01:00
Stafford Horne d89e71e873 target/openrisc: implement shadow registers
Shadow registers are part of the openrisc spec along with sr[cid], as
part of the fast context switching feature.  When exceptions occur,
instead of having to save registers to the stack if enabled the CID will
increment and a new set of registers will be available.

This patch only implements shadow registers which can be used as extra
scratch registers via the mfspr and mtspr if required.  This is
implemented in a way where it would be easy to add on the fast context
switching, currently cid is hardcoded to 0.

This is need for openrisc linux smp kernels to boot correctly.

Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-05-04 09:39:01 +09:00
Peter Maydell 1e06262da6 linux-user: Use correct types in load_symbols()
Coverity doesn't like the code in load_symbols() which assumes
it can use 'int' for a variable that might hold an offset into
the guest ELF file, because in a 64-bit guest that could
overflow. Guest binaries with 2GB sections aren't very likely
and this isn't a security issue because we fully trust the
guest linux-user binary anyway, but we might as well use the
right types, which will placate Coverity. Use uint64_t to
hold section sizes, and bail out if the symbol table is too
large rather than just overflowing an int.

(Coverity issue CID1005776)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1486249533-5260-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2017-02-16 15:29:30 +01:00
Richard Henderson 84775c43f3 target/openrisc: Keep SR_F in a separate variable
This avoids having to keep merging and extracting the flag from SR.

Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14 08:14:59 +11:00
Marek Vasut a0a839b65b nios2: Add usermode binaries emulation
Add missing bits for qemu-user required for emulating Altera Nios2
userspace binaries.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-4-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-24 13:10:35 -08:00
Richard Henderson 7c248bcda1 linux-user: Add HPPA startup and main loop
Including support for the atomic memory op syscalls.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-23 09:52:40 -08:00
Richard Henderson 7c4ee5bcc8 linux-user: Support stack-grows-up in elfload.c
HPPA is a (the) stack-grows-up target, and supporting that requires
rearranging how we compute addresses while laying out the initial
program stack.  In addition, hppa32 requires 64-byte stack alignment
so parameterize that as well.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-22 18:14:10 -08:00
Alex Bennée 98c1076cc9 linux-user/elfload: ensure mmap_lock() held while setting up
Future patches will enforce the holding of mmap_lock() when we are
manipulating internal memory structures. Technically it doesn't matter
in the case of elfload as we haven't started executing yet. However it
is easier to grab the lock when required than special case the
translate-all API.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-8-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-31 10:51:16 +01:00
Michael Walle 58eb53083c linux-user: ppc64: fix ARCH_206 bit in AT_HWCAP
Only the POWER[789] CPUs should have the ARCH_206 bit set. This is what the
linux kernel does. I guess this was also the intention of commit 0e019746.
We have to make sure all *206 bits are set.

Before this patch, the flags check in the GET_FEATURES2 macro returned true
if _any_ bit was set. This worked well as long as there was only one bit
set in the 'flag' parameter. But as explained before, we have to make sure
all bits in the 'flag' parameter are set.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-23 12:39:07 +10:00
Peter Maydell 0ef9ea290e linux-user: Use glib malloc functions in load_symbols()
Switch to using the glib malloc functions in load_symbols();
this deals with a Coverity complaint about possible
integer overflow calculating the allocation size with
'nsyms * sizeof(*syms)'.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:28:20 +03:00
Peter Maydell 772034b63e linux-user: Check dump_write() return in elf_core_dump()
One of the calls to dump_write() in elf_core_dump() was missing
a check for failure (spotted by Coverity). Add the check to
bring it into line with the other calls from this function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:28:03 +03:00
Peter Maydell 68754b442b linux-user: Pass missing MAP_ANONYMOUS to target_mmap() call
A target_mmap() call in load_elf_binary() was missing the MAP_ANONYMOUS
flag. (Spotted by Coverity, because target_mmap() will try to use
-1 as the filedescriptor in this case.)

This has never been noticed because the code in question is for
handling ancient SVr4 iBCS2 binaries.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:26:23 +03:00
Wei Jiangang b8da57fa15 linux-user: complete omission of removing uses of strdup
The 900cfbc just removed two unchecked uses of strdup
in fill_psinfo and missed the rest in core_dump_filename.
This patch fixes it.

Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Message-Id: <1459997185-15669-2-git-send-email-weijg.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-14 12:25:14 +02:00
Paolo Bonzini 02d0e09503 os-posix: include sys/mman.h
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h.  Include it in
sysemu/os-posix.h and remove it from everywhere else.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16 18:39:03 +02:00
Peter Maydell 167e4cdc29 linux-user: arm: Remove ARM_cpsr and similar #defines
The #defines of ARM_cpsr and friends in linux-user/arm/target-syscall.h
can clash with versions in the system headers if building on an
ARM or AArch64 build (though this seems to be dependent on the version
of the system headers). The QEMU defines are not very useful (it's
not clear that they're intended for use with the target_pt_regs struct
rather than (say) the CPUARMState structure) and we only use them in one
function in elfload.c anyway. So just remove the #defines and directly
access regs->uregs[].

Reported-by: Christopher Covington <cov@codeaurora.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:50:39 +03:00
Veronia Bahaa f348b6d1a5 util: move declarations out of qemu-common.h
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)

Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Peter Maydell d39594e9d9 linux-user: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-10-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:22 +00:00
Paolo Bonzini 1382902055 user: introduce "-d page"
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini 0c2d70c448 translate-all: ensure host page mask is always extended with 1's
Anthony reported that >4GB guests on Xen with 32bit QEMU broke after
commit 4ed023c ("Round up RAMBlock sizes to host page sizes", 2015-11-05).

In that patch sizes are masked against qemu_host_page_size/mask which
are uintptr_t, and thus 32bit on a 32bit QEMU, even though the ram space
might be bigger than 4GB on Xen.

Since ram_addr_t is not available on user-mode emulation targets, ensure
that we get a sign extension when masking away the low bits of the address.
Remove the ~10 year old scary comment that the type of these variables
is probably wrong, with another equally scary comment.  The new comment
however does not have "???" in it, which is arguably an improvement.

For completeness use the alignment macros in linux-user and bsd-user
instead of manually doing an &.  linux-user and bsd-user are not affected
by the Xen issue, however.

Reviewed-by: Juan Quintela <quintela@redhat.com>
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Fixes: 4ed023ce2a
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-02 13:12:30 +01:00
Markus Armbruster c78d65e8a7 linux-user: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).  Same Coccinelle semantic patch as in commit b45c03f.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:47 +03:00
Stefan Brüns 59baae9a62 linux-user: remove MAX_ARG_PAGES limit
Instead of creating a temporary copy for the whole environment and
the arguments, directly copy everything to the target stack.

For this to work, we have to change the order of stack creation and
copying the arguments.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:29:11 +03:00
Stefan Brüns 84646ee25b linux-user: remove unused image_info members
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:29:01 +03:00
Peter Crosthwaite 4ecd4d16a0 ppc: Rename ELF_MACHINE to be PPC specific
Rename ELF_MACHINE to be PPC specific. This is used as-is by the
various PPC bootloaders and is locally defined to ELF_MACHINE in linux
user in PPC specific ifdeffery.

This removes another architecture specific definition from the global
namespace (as desired by multi-arch).

Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:44 +02:00
Peter Crosthwaite b597c3f7da arm: Remove ELF_MACHINE from cpu.h
The only generic code relying on this is linux-user. Linux user
already has a lot of #ifdef TARGET_ customisation so instead, define
ELF_ARCH as either EM_ARM or EM_AARCH64 appropriately.

The armv7m bootloader can just pass EM_ARM directly, as that
is architecture specific code. Note that arm_boot already has its own
logic selecting an arm specific elf machine so this makes V7M more
consistent with arm_boot.

This removes another architecture specific definition from the global
namespace.

Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:43 +02:00
Peter Crosthwaite d276a604bf linux-user: elfload: Provide default for elf_check_arch
For many arch's this macro is defined as the predicatable behaviour
of checking the argument for eqaulity against ELF_ARCH. Provide a
default define as such, so only archs with special handling (usually
allowing multiple EM values) need to provide a def.

Arches that do any of:

1: provide this def exactly the same way as the new default
        (alpha, x86_64)
2: check against ELF_MACHINE while defining ELF_ARCH == ELF_MACHINE
        (arm, aarch64)
3: check against EM_FOO directly while defining ELF_ARCH == EM_FOO
        (unicore32, sparc32, ppc32, mips, openrisc, sh4, cris, m86k)

have their elf_check_arch removed as the default will provide the
correct behaviour.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:43 +02:00
Peter Crosthwaite 75be901cdc linux_user: elfload: Default ELF_MACHINE to ELF_ARCH
In most (but not all) cases, ELF_MACHINE and ELF_ARCH are safely the
same. Default ELF_MACHINE to ELF_ARCH. This makes defining ELF_MACHINE
optional for target-*/cpu.h when they are known to match.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:43 +02:00
Chen Gang b16189b222 linux-user: Support tilegx architecture in linux-user
Add main working flow feature, system call processing feature, and elf64
tilegx binary loading feature, based on Linux kernel tilegx 64-bit
implementation.

[rth: Moved all of the implementation of atomic instructions to a later patch.]

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP938552D42808AA60634582B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-15 07:41:19 -07:00
Daniel P. Berrange b6af097528 maint: remove / fix many doubled words
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:21:38 +03:00
Laurent Vivier 4cbea59869 linux-user: remove --enable-guest-base/--disable-guest-base
All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.

Anyway, guest base use can be disabled lively by setting guest
base to 0.

CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.

Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24 11:14:17 -07:00
Yongbok Kim 79cb1f1d69 linux-user: Use abi_ulong for TARGET_ELF_PAGESTART
TARGET_ELF_PAGESTART is required to use abi_ulong to correctly handle
addresses for different target bits width.
This patch fixes a problem when running a 64-bit user mode application
on 32-bit host machines.

Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-06-15 11:36:58 +03:00
Richard Henderson e42fd944f0 linux-user: Add HWCAP for SH4
Only exposing FPU and LLSC as the only features
supported by the translator.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-12 12:02:47 +02:00
Emilio G. Cota 52a53afebd linux-user/elfload: use QTAILQ_FOREACH instead of open-coding it
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-30 16:05:49 +03:00
Peter Maydell 2ccf97ec0f linux-user/elfload.c: Don't use _raw accessor functions
The _raw accessor functions are an implementation detail that has
leaked out to some callsites. Use get_user_u64() instead of ldq_raw().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-5-git-send-email-peter.maydell@linaro.org
2015-01-20 15:19:33 +00:00
Tom Musta ccf661f827 linux-user: Do not subtract offset from end address
When computing the upper address of a program segment, do not subtract the
offset from the virtual address; instead compute the sum of the virtual address
and the memory size.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-11-11 08:12:45 +02:00
Jonas Maebe a93934fecd elf: take phdr offset into account when calculating the program load address
The first program header does not necessarily start at offset 0. This change
corresponds to what the Linux kernel does in load_elf_binary().

Signed-off-by: Jonas Maebe <jonas.maebe@elis.ugent.be>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-11-03 11:03:34 +02:00
Magnus Reftel c5e4a5a95e linux-user: Let user specify random seed
This patch introduces the -seed command line option and the
QEMU_RAND_SEED environment variable for setting the random seed, which
is used for the AT_RANDOM ELF aux entry.

Signed-off-by: Magnus Reftel <reftel@spotify.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-11-03 11:03:34 +02:00
Mikhail Ilyin 1a1c4db9b2 translate-all.c: memory walker initial address miscalculation
The initial base address is miscalculated in walk_memory_regions().
It has to be shifted TARGET_PAGE_BITS more. Holder variables are
extended to target_ulong size otherwise they don't fit for MIPS N32
(a 32-bit ABI with a 64-bit address space) and qemu won't compile.
The issue led to incorrect debug output of memory maps and a
mis-formed coredumped file.

Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-10-06 21:53:35 +03:00
Tom Musta 67d6d829cd linux-user: Move get_ppc64_abi
The get_ppc64_abi is used to determine the ELF ABI (i.e. V1 or V2). This
routine is currently implemented in the linux-user/elfload.c file but
is useful in other scenarios.  Move the routine to a more generally
available location (linux-user/ppc/target_cpu.h).

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta a60438ddd6 linux-user: Support HWCAP2 in PowerPC
Set bits in the AT_HWCAP2 entry of the AUXV.  Specifically, detect and set bits
for bctar, ISEL and ISA 2.07.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:22 +02:00
Tom Musta 0e019746d7 linux-user: Identify Addition Hardware Capabilities for PowerPC
Add VSX, DFP and ISA 2.06 to the bits identified in the AT_HWCAP
entry of the AUXV.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:22 +02:00
Tom Musta 623e250abd linux-user: Correct AUXV Cache Line Sizes for PowerPC
Set the AT_ICACHEBSIZE and AT_DCACHEBSIZE entries of the AUXV to match the
CPU model's cache line sizes.  This fixes memory clobbering problems on more
recent Book 3s implementations; memset(p, 0, N) will use the dcbz instruction
when N is sufficiently large and many of the newer server CPUs have cache lines
sizes of 128 bytes.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:21 +02:00
Craig Heffner d3606f0744 User mode support for Linux ELF files with no section header
In user mode Linux, Qemu currently refuses to load ELF files that do not
contain section headers (ehdr->e_shentsize == 0). Since section headers are not
required in order to load an ELF file, simply removing the e_shentsize check in
elf_check_ehdr() allows ELF binaries with no section headers to be run properly
in user mode:

Signed-off-by: Craig Heffner <cheffner@tacnetsol.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-17 09:21:41 +03:00
Alexander Graf a70daba377 linux-user: Tell guest about big host page sizes
We tell the guest its page size via AUX vectors. The guest process then uses
this page size as information on which boundaries it can mmap() things.

However, if the host has a bigger page size granularity than the guest, it can
not fulfill these mmap() requests - which falls apart when MAP_FIXED is passed
to mmap.

So in that case, let the guest know that we're running on a bigger page size
granularity than the target would require.

This fixes running qemu-ppc (TARGET_PAGE_SIZE=4k) on a 64k page size ppc64 host
for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-06-16 13:24:45 +02:00
Tom Musta f46e9a0b99 target-ppc: Confirm That .bss Pages Are Valid
The existing code does a check to ensure that a .bss region is properly
mmap'd.  When additional mmap is required, the (guest) pages are also
validated.  However, this code has a bug: when host page size is larger
than target page size, it is possible for the .bss pages to already be
(host) mapped but the guest .bss pages may not be valid.

The check to mmap additional space is separated from the flagging of the
target (guest) pages, thus ensuring that both aspects are done properly.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:40 +02:00
Doug Kwan d90b94cd78 target-ppc: Support little-endian PPC64 in user mode.
Look at ELF header to determine ABI version on PPC64.  This is required
for executing the first instruction correctly.  Also print correct machine
name in uname() system call.

Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:40 +02:00
Peter Maydell f6fe04d566 target-arm: A64: Implement two-register SHA instructions
Implement the two-register SHA instruction group from the optional
Crypto Extensions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-10-git-send-email-peter.maydell@linaro.org
2014-06-09 16:06:12 +01:00
Peter Maydell 5acc765c04 target-arm: A64: Implement AES instructions
Implement the AES instructions from the optional Crypto Extensions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-8-git-send-email-peter.maydell@linaro.org
2014-06-09 16:06:12 +01:00
Peter Maydell 130f2e7dcb target-arm: A64: Implement CRC instructions
Implement the optional A64 CRC instructions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-6-git-send-email-peter.maydell@linaro.org
2014-06-09 16:06:12 +01:00
Peter Maydell 411bdc7837 target-arm: A64: Use PMULL feature bit for PMULL
Now that we have a separate ARM_FEATURE_V8_PMULL bit, use it for
the A64 PMULL, not the AES feature bit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-09 16:06:11 +01:00