TCI no longer compiled after commit 76cad71136.
The TCI disassembler depends on data structures which are different for
each QEMU target, so it cannot be compiled as a universal-obj today.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vnc-tls.h is included by vnc.h, and it includes gnutls/gnutls.h.
Hence, GnuTLS header files are needed by all files that include
vnc.h, most notably qmp.c. Move these flags to QEMU_CFLAGS for
simplicity.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These versions of GCC require insane (>2GB) amounts of memory to compile
translate.o. As a countermeasure, disable the culprit optimization pass.
This should fix the buildbot failure for default_x86_64_fedora16. Anyway
this is a good thing to do because people will try to compile 1.3 with
less than 2GB of memory and complain.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Weak symbols were a nice idea, but they turned out not to be a good one.
Toolchain support is just too sparse, in particular llvm-gcc is totally
broken.
This patch uses a surprisingly low-tech approach: a static library.
Symbols in a static library are always overridden by symbols in an
object file. Furthermore, if you place each function in a separate
source file, object files for unused functions will not be taken in.
This means that each function can use all the dependencies that it needs
(especially QAPI stuff such as error_setg).
Thus, all stubs are placed in separate object files and put together in
a static library. The library then is linked to all programs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The entries for libhw* are no longer needed in .gitignore.
There is also no longer a difference between common-obj-y and
hw-obj-y, so one of those two macros is sufficient.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations. Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.
Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.
Remove unused HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
After commit dcff25f2cd, Dependency file
are taken from the directories that have a Makefile.objs file. This is
not enough, since files can be included from other directories.
So, pick them from directories that have an object file in them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Link in oslib objects also for BSD user, but avoid using the version of
qemu_vmalloc() defined in oslib-posix.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now we create object files in a hierarchy under hw/, so the
'clean' target must also be updated to delete those object files.
Rather than using a manual list of subdirectories which will
easily drift out of date, we just delete all .o and .d files
in the target directory hierarchy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit dcff25f2cd removed too many *.d
files. The directories fpu/ and tcg/ still don't use the recursive
subdir rules.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
I think I understand enough of what's going on in these rules to ensure this is
right. But I could certainly use a second or third opinion...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is no difference in oslib-obj-y between user-mode and system
targets. There used to be when user-mode could optionally be
compiled with PIE.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All paths are now explicitly given, and the object tree mimics
the source tree, so there is no need to apply special vpaths.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This completes the move to nested Makefiles for virtio and a few
other files that were not part of obj-TARGET-y, but still were
compiled separately for each target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At this point we will start adding nesting behavior to other files
than Makefile.target. Because Makefile.objs is included by
Makefile.target, it is simpler to move the processing of
subdirectories there.
To enable this, only add per-target files to obj-y. Use a separate
variable for the linker dependencies, all-obj-y. This variable includes
obj-y and also all objects that are taken from other directories.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This simplifies things, because they will only be included for softmmu
targets and because the stubs are taken out-of-line in separate files,
which in the future could even be compiled only once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keeping GENERATED_HEADERS dependencies up-to-date everywhere is complex.
We can simply make the Makefile depend on them, and they will be built
before all other targets.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command's usage:
dump-guest-memory [-p] protocol [begin] [length]
The supported protocol can be file or fd:
1. file: the protocol starts with "file:", and the following string is
the file's path.
2. fd: the protocol starts with "fd:", and the following string is the
fd's name.
Note:
1. If you want to use gdb to process the core, please specify -p option.
The reason why the -p option is not default is:
a. guest machine in a catastrophic state can have corrupted memory,
which we cannot trust.
b. The guest machine can be in read-mode even if paging is enabled.
For example: the guest machine uses ACPI to sleep, and ACPI sleep
state goes in real-mode.
2. If you don't want to dump all guest's memory, please specify the start
physical address and the length.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The core file contains register's value. These APIs write registers to
core file, and them will be called in the following patch.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Walk cpu's page table and collect all virtual address and physical address mapping.
Then, add these mapping into memory mapping list. If the guest does not use paging,
it will do nothing. Note: the I/O memory will be skipped.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The memory mapping list stores virtual address and physical address mapping.
The virtual address and physical address are contiguous in the mapping.
The folloing patch will use this information to create PT_LOAD in the vmcore.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* 'cocoa-for-upstream' of git://repo.or.cz/qemu/afaerber:
Drop darwin-user
configure: add '--disable-cocoa' switch
raw-posix: Do not use CONFIG_COCOA macro
* 'qom-cpu-rest.v1' of git://github.com/afaerber/qemu-cpu:
Makefile: Simplify compilation of target-*/cpu.c
target-mips: Start QOM'ifying CPU init
target-mips: QOM'ify CPU
target-m68k: Add QOM CPU subclasses
target-m68k: Start QOM'ifying CPU init
target-m68k: QOM'ify CPU reset
target-m68k: QOM'ify CPU
target-sh4: Start QOM'ifying CPU init
target-sh4: QOM'ify CPU reset
target-sh4: QOM'ify CPU
MAINTAINERS: Downgrade target-mips and target-sh4 to Odd Fixes
MAINTAINERS: Downgrade target-m68k to Odd Fixes
It's been orphaned, not compiling for a long time and despite Apple's
drop of their Rosetta ppc emulation technology with Mac OS X Lion no one
has stepped up to fix it.
Testing necessary changes wrt QOM'ification thus is impossible, so we
might as well remove it completely.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Embed CPUMIPSState as first member of QOM MIPSCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Embed CPUM68KState as first member of QOM M68kCPU.
Drop cpu_m68k_close() in favor of object_delete().
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Laurent Vivier <Laurent@Vivier.EU>
Tested-by: Laurent Vivier <Laurent@Vivier.EU>
Embed CPUSH4State as first member of SuperHCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Autoconf concept of "datadir" is supposed to be "$prefix/share", not
"$prefix/share/PACKAGE", so using datadir for the Qemu-specific
directory is confusing.
The current C code that uses CONFIG_QEMU_DATADIR should be safe, as now
create_config generates the same #define name (CONFIG_QEMU_DATADIR) for
both "datadir" and "qemu_datadir" variables.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Embed CPUMBState as first member of QOM MicroBlazeCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Tested-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
[AF: Updated cpu.c to include cpu-qom.h indirectly via cpu.h]
Embed CPUCRISState as first member of QOM CRISCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
* origin/master: (27 commits)
target-arm: Move reset handling to arm_cpu_reset
target-arm: Drop cpu_reset_model_id()
target-arm: Move cache ID register setup to cpu specific init fns
target-arm: Move OMAP cp15_i_{max,min} reset to cpu_state_reset
target-arm: Move feature register setup to per-CPU init fns
target-arm: Move iWMMXT wCID reset to cpu_state_reset
target-arm: Drop JTAG_ID documentation
target-arm: Move SCTLR reset value setup to per cpu init fns
target-arm: Move CTR setup to per cpu init fns
target-arm: Move MVFR* setup to per cpu init fns
target-arm: Move FPSID config to cpu init fns
target-arm: Move feature bit settings to CPU init fns
target-arm: Add QOM subclasses for each ARM cpu implementation
target-arm: remind to keep arm features in sync with linux-user/elfload.c
tci: GETPC() macro must return an uintptr_t
gdbstub: Synchronize CPU state unconditionally in gdb_set_cpu_pc
softfloat: make USE_SOFTFLOAT_STRUCT_TYPES compile
target-xtensa: add tests for LOOPNEZ and LOOPGTZ
target-xtensa: fix LOOPNEZ/LOOPGTZ translation
qtest: add m48t59 tests for Sparc
...
The versatile i2c controller implementation was separated to
its own file called versatile_i2c.c. This is done as a preparation
for adding i2c support to the versatilepb board.
Signed-off-by: Oskar Andero <oskar.andero@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The tracetool script is written in shell and has hit several portability
problems due to shell quirks or external tools across host platforms.
Additionally the amount of string processing and lack of real data
structures makes it tough to implement code generator backends for
tracers that are more complex.
This patch replaces the shell version of tracetool with a Python
version. The new tracetool design is:
scripts/tracetool.py - top-level script
scripts/tracetool/backend/ - tracer backends live here (simple, ust)
scripts/tracetool/format/ - output formats live here (.c, .h)
There is common code for trace-events definition parsing so that
backends can focus on generating code rather than parsing input.
Support for all existing backends (nop, stderr, simple, ust,
and dtrace) is added back in follow-up patches.
[Commit description written by Stefan Hajnoczi]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* sstabellini/for_anthony:
xen: introduce an event channel for buffered io event notifications
xen-mapcache: don't unmap locked entry during mapcache invalidation
Xen, mapcache: Fix the compute of the size of bucket.
xen: handle backend deletion from xenstore
Xen: Add xen-apic support and hook it up.
Xen: basic HVM MSI injection support.
Paolo Bonzini