Currently, when a notifier is attempted to be registered and its
flags are not supported (especially the MAP one) by the IOMMU MR,
we generally abruptly exit in the IOMMU code. The failure could be
handled more nicely in the caller and especially in the VFIO code.
So let's allow memory_region_register_iommu_notifier() to fail as
well as notify_flag_changed() callback.
All sites implementing the callback are updated. This patch does
not yet remove the exit(1) in the amd_iommu code.
in SMMUv3 we turn the warning message into an error message saying
that the assigned device would not work properly.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 9458a9a1df added synchronization
of vCPU and migration operations through calling run_on_cpu operation.
However, in replay mode this synchronization is unneeded, because
I/O and vCPU threads are already synchronized.
This patch disables such synchronization for record/replay mode.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
Fixes the previous TLB_WATCHPOINT patches because we are currently
failing to set cpu->mem_io_pc with the call to cpu_check_watchpoint.
Pass down the retaddr directly because it's readily available.
Fixes: 50b107c5d6
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All callers pass false to this argument. Remove it and pass the
constant on to tb_invalidate_phys_page_range__locked.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 9458a9a1df, all readers of the dirty bitmaps wait
for the rcu lock, which means that they wait until the end
of any executing TranslationBlock.
As a consequence, there is no need for the actual access
to happen in between the _prepare and _complete. Therefore,
we can improve things by merging the two functions into
notdirty_write and dropping the NotDirtyInfo structure.
In addition, the only users of notdirty_write are in cputlb.c,
so move the merged function there. Pass in the CPUIOTLBEntry
from which the ram_addr_t may be computed.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is only one caller, tlb_set_page_with_attrs. We cannot
inline the entire function because the AddressSpaceDispatch
structure is private to exec.c, and cannot easily be moved to
include/exec/memory-internal.h.
Compute is_ram and is_romd once within tlb_set_page_with_attrs.
Fold the number of tests against these predicates. Compute
cpu_physical_memory_is_clean outside of the tlb lock region.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pages that we want to track for NOTDIRTY are RAM. We do not
really need to go through the I/O path to handle them.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It does not require going through the whole I/O path
in order to discard a write.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_tb_read tracepoint is unreachable, since notdirty
is supposed to apply only to writes. The memory_region_tb_write
tracepoint is mis-named, because notdirty is not only used for TB
invalidation. It is also used for e.g. VGA RAM updates and migration.
Replace memory_region_tb_write with memory_notdirty_write_access,
and place it in memory_notdirty_write_prepare where it can catch
all of the instances. Add memory_notdirty_set_dirty to log when
we no longer intercept writes to a page.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Neither stat(2) nor lseek(2) report the size of Linux devdax pmem
character device nodes. Commit 314aec4a6e
("hostmem-file: reject invalid pmem file sizes") added code to
hostmem-file.c to fetch the size from sysfs and compare against the
user-provided size=NUM parameter:
if (backend->size > size) {
error_setg(errp, "size property %" PRIu64 " is larger than "
"pmem file \"%s\" size %" PRIu64, backend->size,
fb->mem_path, size);
return;
}
It turns out that exec.c:qemu_ram_alloc_from_fd() already has an
equivalent size check but it skips devdax pmem character devices because
lseek(2) returns 0:
if (file_size > 0 && file_size < size) {
error_setg(errp, "backing store %s size 0x%" PRIx64
" does not match 'size' option 0x" RAM_ADDR_FMT,
mem_path, file_size, size);
return NULL;
}
This patch moves the devdax pmem file size code into get_file_size() so
that we check the memory size in a single place:
qemu_ram_alloc_from_fd(). This simplifies the code and makes it more
general.
This also fixes the problem that hostmem-file only checks the devdax
pmem file size when the pmem=on parameter is given. An unchecked
size=NUM parameter can lead to SIGBUS in QEMU so we must always fetch
the file size for Linux devdax pmem character device nodes.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190830093056.12572-1-stefanha@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The maximum level is defined as P_L2_LEVELS and skip is defined with 6
bits, which means if P_L2_LEVELS < (1 << 6), skip never exceeds the
boundary.
Since this check is between two constants, which leverages compiler
to optimize the code based on different configuration.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190321082555.21118-7-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
skip is defined with 6 bits. So the maximum value should be (1 << 6).
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190321082555.21118-6-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In subpage_init(), we will set subpage->sub_section to
PHYS_SECTION_UNASSIGNED by subpage_register. Since
PHYS_SECTION_UNASSIGNED is defined to be 0, and we allocate subpage with
g_malloc0, this means subpage->sub_section is already initialized to 0.
This patch removes the redundant setup for a new subpage and also fix
the code style.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190321082555.21118-5-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The purpose of these two MAX here is to get the maximum of these three
variables:
A: map->nodes_nb + nodes
B: map->nodes_nb_alloc
C: alloc_hint
We can write it like MAX(A, B, C). Since the if condition says A > B,
this means MAX(A, B, C) = MAX(A, C).
This patch just simplify the calculation a bit.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190321082555.21118-4-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Function phys_page_set() and phys_page_set_level() 's argument *nb*
stands for number of pages to set instead of hardware address.
This would be more proper to use uint64_t instead of hwaddr for its
type.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190321082555.21118-2-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl1uiyYdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8AuwgAnYLQQbL8kjSqzp7q
gRlj0M2SX41ZW3fMkI794RwsljD9Z0QS7YGnpzHolig9XUYrGnip7STrMvlCr/1L
CIMWNHlgitgBMszLqg42/TB+6RxXn+DMX/ShUzTagC6xQhinCIpdEjoLaTKSgeP+
foIyJ2uoJLKOBP8cPTQp8evongtoQIljpsZZ0K8a4sreO1d6ytH+olkuoGiROft+
VoJkA+kNHd9cE+LPCva8UFGu1QE6uCySvhepzOpnvOtK+SXKUm2yLOFGu7RWP1pT
RkE0oRyRnImtg+cViHfUUFogIffFROdL5tuYMQVuqbINeROPUgJPav+R1Nz1P60a
xM2HEw==
=bLLU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into staging
Allow page table bit to swap endianness.
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
# gpg: Signature made Tue 03 Sep 2019 16:47:50 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190903: (36 commits)
tcg: Factor out probe_write() logic into probe_access()
tcg: Make probe_write() return a pointer to the host page
s390x/tcg: Pass a size to probe_write() in do_csst()
hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY
mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well
tcg: Enforce single page access in probe_write()
tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code
s390x/tcg: Fix length calculation in probe_write_access()
s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access()
tcg: Check for watchpoints in probe_write()
cputlb: Handle watchpoints via TLB_WATCHPOINT
cputlb: Remove double-alignment in store_helper
cputlb: Fix size operand for tlb_fill on unaligned store
exec: Factor out cpu_watchpoint_address_matches
cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK
exec: Factor out core logic of check_watchpoint()
exec: Move user-only watchpoint stubs inline
target/sparc: sun4u Invert Endian TTE bit
target/sparc: Add TLB entry with attributes
cputlb: Byte swap memory transaction attribute
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The raising of exceptions from check_watchpoint, buried inside
of the I/O subsystem, is fundamentally broken. We do not have
the helper return address with which we can unwind guest state.
Replace PHYS_SECTION_WATCH and io_mem_watch with TLB_WATCHPOINT.
Move the call to cpu_check_watchpoint into the cputlb helpers
where we do have the helper return address.
This allows watchpoints on RAM to bypass the full i/o access path.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to move the check for watchpoints from
memory_region_section_get_iotlb to tlb_set_page_with_attrs.
Isolate the loop over watchpoints to an exported function.
Rename the existing cpu_watchpoint_address_matches to
watchpoint_address_matches, since it doesn't actually
have a cpu argument.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to perform the same checks in probe_write() to trigger a cpu
exit before doing any modifications. We'll have to pass a PC.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190823100741.9621-9-david@redhat.com>
[rth: Use vaddr for len, like other watchpoint functions;
Move user-only stub to static inline.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let the user-only watchpoint stubs resolve to empty inline functions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that MemOp has been pushed down into the memory API, and
callers are encoding endianness, we can collapse byte swaps
along the I/O path into the accelerator and target independent
adjust_endianness.
Collapsing byte swaps along the I/O path enables additional endian
inversion logic, e.g. SPARC64 Invert Endian TTE bit, with redundant
byte swaps cancelling out.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <911ff31af11922a9afba9b7ce128af8b8b80f316.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.
Call memory_region_dispatch_{read|write} with endianness encoded into
the "MemOp op" operand.
This patch does not change any behaviour as
memory_region_dispatch_{read|write} is yet to handle the endianness.
Once it does handle endianness, callers with byte swaps can collapse
them into adjust_endianness.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <8066ab3eb037c0388dfadfe53c5118429dd1de3a.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Convert interfaces by using no-op size_memop.
After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".
As size_memop is a no-op, this patch does not change any behaviour.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <3b042deef0a60dd49ae2320ece92120ba6027f2b.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move existing numa global numa_info (renamed as "nodes") into NumaState.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-5-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add struct NumaState in MachineState and move existing numa global
nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable
numa_support into MachineClass to decide which submachines support NUMA.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-3-tao3.xu@intel.com>
[ehabkost: include hw/boards.h again to fix build failures]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
There is a race between TCG and accesses to the dirty log:
vCPU thread reader thread
----------------------- -----------------------
TLB check -> slow path
notdirty_mem_write
write to RAM
set dirty flag
clear dirty flag
TLB check -> fast path
read memory
write to RAM
Fortunately, in order to fix it, no change is required to the
vCPU thread. However, the reader thread must delay the read after
the vCPU thread has finished the write. This can be approximated
conservatively by run_on_cpu, which waits for the end of the current
translation block.
A similar technique is used by KVM, which has to do a synchronous TLB
flush after doing a test-and-clear of the dirty-page flags.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e35704ba9c "numa: Move NUMA declarations from sysemu.h to
numa.h" left a few NUMA-related macros behind. Move them now.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-26-armbru@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Introduce a new memory region listener hook log_clear() to allow the
listeners to hook onto the points where the dirty bitmap is cleared by
the bitmap users.
Previously log_sync() contains two operations:
- dirty bitmap collection, and,
- dirty bitmap clear on remote site.
Let's take KVM as example - log_sync() for KVM will first copy the
kernel dirty bitmap to userspace, and at the same time we'll clear the
dirty bitmap there along with re-protecting all the guest pages again.
We add this new log_clear() interface only to split the old log_sync()
into two separated procedures:
- use log_sync() to collect the collection only, and,
- use log_clear() to clear the remote dirty bitmap.
With the new interface, the memory listener users will still be able
to decide how to implement the log synchronization procedure, e.g.,
they can still only provide log_sync() method only and put all the two
procedures within log_sync() (that's how the old KVM works before
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 is introduced). However with this
new interface the memory listener users will start to have a chance to
postpone the log clear operation explicitly if the module supports.
That can really benefit users like KVM at least for host kernels that
support KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2.
There are three places that can clear dirty bits in any one of the
dirty bitmap in the ram_list.dirty_memory[3] array:
cpu_physical_memory_snapshot_and_clear_dirty
cpu_physical_memory_test_and_clear_dirty
cpu_physical_memory_sync_dirty_bitmap
Currently we hook directly into each of the functions to notify about
the log_clear().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190603065056.25211-7-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Also we change the 2nd parameter of it to be the relative offset
within the memory region. This is to be used in follow up patches.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190603065056.25211-6-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Basically, the context could get the MachineState reference via call
chains or unrecommended qdev_get_machine() in !CONFIG_USER_ONLY mode.
A local variable of the same name would be introduced in the declaration
phase out of less effort OR replace it on the spot if it's only used
once in the context. No semantic changes.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-4-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in
qemu-common.h. This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.
Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
besides the existing 'shared' flags, we are going to add
'is_pmem' to qemu_ram_mmap(), which indicated the memory backend
file is a persist memory.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Zhang Yi <yi.z.zhang@linux.intel.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <786c46862cfeb253ee0ea2f44d62ffe76edb7fa4.1549555521.git.yi.z.zhang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The "model[,option...]" string parsed by the function is not just
a CPU model. Rename the function and its argument to indicate it
expects the full "-cpu" option to be provided.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190417025944.16154-2-ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Rename qemu_getrampagesize() to qemu_minrampagesize(). While at it,
properly rename find_max_supported_pagesize() to
find_min_backend_pagesize().
s390x is actually interested into the maximum ram pagesize, so
introduce and use qemu_maxrampagesize().
Add a TODO, indicating that looking at any mapped memory backends is not
100% correct in some cases.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190417113143.5551-3-david@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
mtree_info() takes an fprintf()-like callback and a FILE * to pass to
it, and so do its helper functions. Passing around callback and
argument is rather tiresome.
Its only caller hmp_info_mtree() passes monitor_printf() cast to
fprintf_function and the current monitor cast to FILE *.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-9-armbru@redhat.com>
qemu_getrampagesize() works out the minimum host page size backing any of
guest RAM. This is required in a few places, such as for POWER8 PAPR KVM
guests, because limitations of the hardware virtualization mean the guest
can't use pagesizes larger than the host pages backing its memory.
However, it currently checks against *every* memory backend, whether or not
it is actually mapped into guest memory at the moment. This is incorrect.
This can cause a problem attempting to add memory to a POWER8 pseries KVM
guest which is configured to allow hugepages in the guest (e.g.
-machine cap-hpt-max-page-size=16m). If you attempt to add non-hugepage,
you can (correctly) create a memory backend, however it (correctly) will
throw an error when you attempt to map that memory into the guest by
'device_add'ing a pc-dimm.
What's not correct is that if you then reset the guest a startup check
against qemu_getrampagesize() will cause a fatal error because of the new
memory object, even though it's not mapped into the guest.
This patch corrects the problem by adjusting find_max_supported_pagesize()
(called from qemu_getrampagesize() via object_child_foreach) to exclude
non-mapped memory backends.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
flatview_add_to_dispatch() registers page based on the condition of
*section*, which may looks like this:
|s|PPPPPPP|s|
where s stands for subpage and P for page.
The procedure of this function could be described as:
- register first subpage
- register page
- register last subpage
This means the procedure could be simplified into these three steps
instead of a loop iteration.
This patch refactors the function into three corresponding steps and
adds some comment to clarify it.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190311054252.6094-1-richardw.yang@linux.intel.com>
[Paolo: move exit before adjustment of remain.offset_within_*,
otherwise int128_get64 fails when a region is 2^64 bytes long]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If ignore-shared capability is set then skip shared RAMBlocks during the
RAM migration.
Also, move qemu_ram_foreach_migratable_block (and rename) to the
migration code, because it requires access to the migration capabilities.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190215174548.2630-4-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, qemu_ram_foreach_* calls RAMBlockIterFunc with many
block-specific arguments. But often iter func needs RAMBlock*.
This refactoring is needed for fast access to RAMBlock flags from
qemu_ram_foreach_block's callback. The only way to achieve this now
is to call qemu_ram_block_from_host (which also enumerates blocks).
So, this patch reduces complexity of
qemu_ram_foreach_block() -> cb() -> qemu_ram_block_from_host()
from O(n^2) to O(n).
Fix RAMBlockIterFunc definition and add some functions to read
RAMBlock* fields witch were passed.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190215174548.2630-2-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Some address/memory APIs have different type between
'hwaddr/target_ulong addr' and 'int len'. It is very unsafe, especially
some APIs will be passed a non-int len by caller which might cause
overflow quietly.
Below is an potential overflow case:
dma_memory_read(uint32_t len)
-> dma_memory_rw(uint32_t len)
-> dma_memory_rw_relaxed(uint32_t len)
-> address_space_rw(int len) # len overflow
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Crosthwaite <crosthwaite.peter@gmail.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The commit 7197fb4058 ("util/mmap-alloc:
fix hugetlb support on ppc64") fixed Huge TLB mappings on ppc64.
However, we still need to consider the underlying huge page size
during munmap() because it requires that both address and length be a
multiple of the underlying huge page size for Huge TLB mappings.
Quote from "Huge page (Huge TLB) mappings" paragraph under NOTES
section of the munmap(2) manual:
"For munmap(), addr and length must both be a multiple of the
underlying huge page size."
On ppc64, the munmap() in qemu_ram_munmap() does not work for Huge TLB
mappings because the mapped segment can be aligned with the underlying
huge page size, not aligned with the native system page size, as
returned by getpagesize().
This has the side effect of not releasing huge pages back to the pool
after a hugetlbfs file-backed memory device is hot-unplugged.
This patch fixes the situation in qemu_ram_mmap() and
qemu_ram_munmap() by considering the underlying page size on ppc64.
After this patch, memory hot-unplug releases huge pages back to the
pool.
Fixes: 7197fb4058
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The tcg_register_iommu_notifier() code has a GArray of
TCGIOMMUNotifier structs which it has registered by passing
memory_region_register_iommu_notifier() a pointer to the embedded
IOMMUNotifier field. Unfortunately, if we need to enlarge the
array via g_array_set_size() this can cause a realloc(), which
invalidates the pointer that memory_region_register_iommu_notifier()
put into the MemoryRegion's iommu_notify list. This can result
in segfaults.
Switch the GArray to holding pointers to the TCGIOMMUNotifier
structs, so that we can individually allocate and free them.
Cc: qemu-stable@nongnu.org
Fixes: 1f871c5e6b ("exec.c: Handle IOMMUs in address_space_translate_for_iotlb()")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128174241.5860-1-peter.maydell@linaro.org
ROM devices go via MemoryRegionOps->write() callbacks for write
operations and do not dirty/invalidate that memory. Device emulation
must be able to mark memory ranges that have been modified internally
(e.g. using memory_region_get_ram_ptr()).
Introduce the memory_region_flush_rom_device() API for this purpose.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190123212234.32068-2-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fix block comment style]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger