It is a pain to re-compile when you need to debug and tracepoints are
a fairly low impact way to instrument QEMU.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191205122518.10010-2-alex.bennee@linaro.org>
The virtual timebase register (VTB) is a 64-bit register which
increments at the same rate as the timebase register, present on POWER8
and later processors.
The register is able to be read/written by the hypervisor and read by
the supervisor. All other accesses are illegal.
Currently the VTB is just an alias for the timebase (TB) register.
Implement the VTB so that is can be read/written independent of the TB.
Make use of the existing method for accessing timebase facilities where
by the compensation is stored and used to compute the value on reads/is
updated on writes.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[ clg: rebased on current ppc tree ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191128134700.16091-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ARMv8.2 introduced support for Data Cache Clean instructions
to PoP (point-of-persistence) - DC CVAP and PoDP (point-of-deep-persistence)
- DV CVADP. Both specify conceptual points in a memory system where all writes
that are to reach them are considered persistent.
The support provided considers both to be actually the same so there is no
distinction between the two. If none is available (there is no backing store
for given memory) both will result in Data Cache Clean up to the point of
coherency. Otherwise sync for the specified range shall be performed.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191121000843.24844-5-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All timestamps were copied to atime instead of to their respective
fields.
Fixes: efa921845c ("linux-user: Add support for translation of statx() syscall")
Signed-off-by: Ariadne Conill <ariadne@dereferenced.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191122174040.569252-1-ariadne@dereferenced.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
stime() has been withdrawn from glibc
(12cbde1dae6f "Use clock_settime to implement stime; withdraw stime.")
Implement the target stime() syscall using host
clock_settime(CLOCK_REALTIME, ...) as it is done internally in glibc.
Tested qemu-ppc/x86_64 with:
#include <time.h>
#include <stdio.h>
int main(void)
{
time_t t;
int ret;
/* date -u -d"2019-11-12T15:11:00" "+%s" */
t = 1573571460;
ret = stime(&t);
printf("ret %d\n", ret);
return 0;
}
# date; ./stime; date
Tue Nov 12 14:18:32 UTC 2019
ret 0
Tue Nov 12 15:11:00 UTC 2019
Buglink: https://bugs.launchpad.net/qemu/+bug/1852115
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191112142556.6335-1-laurent@vivier.eu>
This value is not, as far as I know, used by any linux software,
but it is set by the kernel and is part of the ABI.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191106113318.10226-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We failed to set the secondary return value in %o1
we failed to advance the PC past the syscall,
we failed to adjust regwptr into the new structure,
we stored the stack pointer into the wrong register.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191106113318.10226-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. Add an empty inline function for
each target, and invoke it from the proper places.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. To avoid confusion, rename the
one we have to make it clear it affects the child.
At the same time, pass in the flags from the clone syscall.
We will need them for correct behaviour for Sparc.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use WREG_I0 not WREG_O0 in order to properly save the "ins".
The "outs" were saved separately in setup___siginfo.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191106113318.10226-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
s/UREG_FP/WREG_SP/g
This is non-obvious because the UREG_FP constant is fact wrong.
However, the previous search-and-replace patch made it clear that
UREG_FP expands to WREG_O6, and we can see from the enumeration in
target/sparc/cpu.h that WREG_O6 is in fact WREG_SP, the stack pointer.
The UREG_SP define is unused; remove it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191106113318.10226-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is non-obvious because the UREG constants are in fact wrong.
s/UREG_I/WREG_O/g
s/UREG_O/WREG_I/g
s/UREG_L/WREG_L/g
These substitutions have identical integer values.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191106113318.10226-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This fixes a naming bug wherein we used "UREG_FP" to access the
stack pointer. OTOH, the "UREG_FP" constant was also defined
incorrectly such that it *did* reference the stack pointer.
Note that the kernel legitimately uses the name "FP", because it
utilizes the rolled stack window in processing the system call.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191106113318.10226-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This change includes support for all AF_NETLINK socket options up to about
kernel version 5.4 (5.4 is not formally released at the time of writing).
Socket options that were introduced in kernel versions before the oldest
currently stable kernel version are guarded by kernel version macros.
This change has been built under gcc 8.3, and clang 9.0, and it passes
`make check`. The netlink options have been tested by emulating some
non-trival software that uses NETLINK socket options, but they have
not been exaustively verified.
Signed-off-by: Josh Kunz <jkz@google.com>
Message-Id: <20191029224310.164025-1-jkz@google.com>
[lv: updated patch according to CODING_STYLE]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To avoid too much duplication add a wrapper that the existing trace
and the new plugin calls can live in. We could move the -strace code
here as well but that is left for a future series as the code is
subtly different between the bsd and linux.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[AJB: wrap in syscall-trace.h, expand commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The CPU loop tagged all the queued signals as QEMU_SI_KILL while it was
filling the `_sigfault` part of `siginfo`: this caused QEMU to copy the
wrong fields over to the userspace program.
Make sure the fault address recorded by the MMU is is stored in the CPU
environment structure.
In case of memory faults store the exception address into `siginfo`.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Continue setting, but not relying upon, env->hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-24-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continue setting, but not relying upon, env->hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-23-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Begin setting, but not relying upon, env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the format is not the syscall last argument, a comma is append.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191021114857.20538-9-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Extract common print_sockfd() from various socket related syscalls.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191021114857.20538-7-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In any of these `*_for_each_*` functions, the last entry in the buffer (so the
"remaining length in the buffer" `len` is equal to the length of the
entry `nlmsg_len`/`nla_len`/etc) has size that is not a multiple of the
alignment, the aligned lengths `*_ALIGN(*_len)` will be greater than `len`.
Since `len` is unsigned (`size_t`), it underflows and the loop will read
pass the buffer.
This may manifest as random EINVAL or EOPNOTSUPP error on IO or network
system calls.
Signed-off-by: Shu-Chun Weng <scw@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191018001920.178283-1-scw@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Fix the CBAR register implementation for Cortex-A53,
Cortex-A57, Cortex-A72
* Fix direct booting of Linux kernels on emulated CPUs
which have an AArch32 EL3 (incorrect NSACR settings
meant they could not access the FPU)
* semihosting cleanup: do more work at translate time
and less work at runtime
-----BEGIN PGP SIGNATURE-----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=/0m2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190927' into staging
target-arm queue:
* Fix the CBAR register implementation for Cortex-A53,
Cortex-A57, Cortex-A72
* Fix direct booting of Linux kernels on emulated CPUs
which have an AArch32 EL3 (incorrect NSACR settings
meant they could not access the FPU)
* semihosting cleanup: do more work at translate time
and less work at runtime
# gpg: Signature made Fri 27 Sep 2019 15:32:43 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190927:
hw/arm/boot: Use the IEC binary prefix definitions
hw/arm/boot.c: Set NSACR.{CP11,CP10} for NS kernel boots
tests/tcg: add linux-user semihosting smoke test for ARM
target/arm: remove run-time semihosting checks for linux-user
target/arm: remove run time semihosting checks
target/arm: handle A-profile semihosting at translate time
target/arm: handle M-profile semihosting at translate time
tests/tcg: clean-up some comments after the de-tangling
target/arm: fix CBAR register for AArch64 CPUs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# tests/tcg/arm/Makefile.target
Now we do all our checking at translate time we can make cpu_loop a
little bit simpler. We also introduce a simple linux-user semihosting
test case to defend the functionality. The out-of-tree softmmu based
semihosting tests are still more comprehensive.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190913151845.12582-6-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly using the 64-bit AIX ABI instead of the 32-bit
SYSV ABI for setting NIP for the signal handler.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
FDFLUSH is used for flushing buffers of floppy drives. Support in
QEMU is needed because some of Debian packages use this ioctl while
running post-build tests. One such example is 'tar' package.
Signed-off-by: Yunqiang Su <ysu@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1567601968-26946-5-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
FIOGETOWN and FIOSETOWN ioctls have platform-specific definitions,
hence non-standard definition in QEMU too.
Other than that, they both have a single integer argument, and their
functionality is emulated in a straightforward way.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1567601968-26946-4-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
RNDRESEEDCRNG is a newer ioctl (added in kernel 4.17), and an
"ifdef" guard is used for that reason in this patch.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1567601968-26946-3-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
QEMU_STRACE and QEMU_RAND_SEED are handled by the parse_args, no need to
do it again in main.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190906165736.5612-1-jcmvbkbc@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Xtensa binaries built for call0 ABI don't rotate register window on
function calls and returns. Invocation of signal handlers from the
kernel is therefore different in windowed and call0 ABIs.
There's currently no way to determine xtensa ELF binary ABI from the
binary itself. Add handler for the -xtensa-abi-call0 command line
parameter/QEMU_XTENSA_ABI_CALL0 envitonment variable to the qemu-user
and record ABI choice. Use it to initialize PS.WOE in xtensa_cpu_reset.
Check PS.WOE in setup_rt_frame to determine how a signal should be
delivered.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20190906165713.5558-1-jcmvbkbc@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is needed to support debugging PIE ELF binaries running under QEMU
user mode. Currently, `code_offset` and `data_offset` remain unset for
all ELF binaries, so GDB is unable to correctly locate the position of
the binary's text and data.
The fields `code_offset`, and `data_offset` were originally added way
back in 2006 to support debugging of bFMT executables (978efd6aac),
and support was just never added for ELF. Since non-PIE binaries are
loaded at exactly the address specified in the binary, GDB does not need
to relocate any symbols, so the buggy behavior is not normally observed.
http://sourceware.org/gdb/onlinedocs/gdb/General-Query-Packets.html#index-qOffsets-packet
Buglink: https://bugs.launchpad.net/qemu/+bug/1528239
Signed-off-by: Josh Kunz <jkz@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190816233422.16715-1-jkz@google.com>
[lv: added link to documentation]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Limit the virtual address space for M-profile cpus to 2GB,
so that we avoid all of the magic addresses in the top half
of the M-profile system map.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190822185929.16891-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Turn the scalar macro into a functional macro. Move the creation
of the cpu up a bit within main() so that we can pass it to the
invocation of MAX_RESERVED_VA. Delay the validation of the -R
parameter until MAX_RESERVED_VA is computed.
So far no changes to any of the MAX_RESERVED_VA macros to actually
use the cpu in any way, but ARM will need it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190822185929.16891-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add support for the memfd_create syscall. If the host does not have the
libc wrapper, translate to a direct syscall with NC-macro.
Buglink: https://bugs.launchpad.net/qemu/+bug/1734792
Signed-off-by: Shu-Chun Weng <scw@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190819180947.180725-1-scw@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Just passing NULL means we end up ignoring the bad dfilter spec
instead of reporting it and exiting as we should.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190830143648.2967-1-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
timer_getoverrun returns the "overrun count" for the timer, which is not
a file descriptor and thus should not call fd_trans_unregister on it.
Signed-off-by: Shu-Chun Weng <scw@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190819185348.221825-1-scw@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add the HWCAP2_* bits from kernel version v5.3-rc3.
Enable the bits corresponding to ARMv8.5-CondM and ARMv8.5-FRINT.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190809171156.3476-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
filename is only used to open the file if AT_EXECFD is not provided.
But exec_path already contains the path of the file to open.
Remove filename as it is only used in main.c whereas exec_path is
also used in syscall.c.
Fixes: d088d664f2 ("linux-user: identify running binary in /proc/self/exe")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190714134028.315-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is hardware support for double-precision floating-point using
pairs of 32-bit registers. Fix latent bugs in the heretofore unused
helper_itofd and helper_ftoid. Include the bit for cpu "any".
Change the default cpu for linux-user to "any".
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We should avoid including the whole of softfloat headers in cpu.h and
explicitly include it only where we will be calling softfloat
functions. We can use the -types.h in cpu.h for the few bits that are
global. We also move the restore_snan_bit_mode into internal.h and
include -helpers.h there.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-20-armbru@redhat.com>
The alternate signal stack set up by the sigaltstack syscall is
supposed to be per-thread. We were incorrectly implementing it as
process-wide. This causes problems for guest binaries that rely on
this. Notably the Go runtime does, and so we were seeing crashes
caused by races where two guest threads might incorrectly both
execute on the same stack simultaneously.
Replace the global target_sigaltstack_used with a field
sigaltstack_used in the TaskState, and make all the references to the
old global instead get a pointer to the TaskState and use the field.
Fixes: https://bugs.launchpad.net/qemu/+bug/1696773
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190725131645.19501-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The SIOCGSTAMP symbol was previously defined in the
asm-generic/sockios.h header file. QEMU sees that header
indirectly via sys/socket.h
In linux kernel commit 0768e17073dc527ccd18ed5f96ce85f9985e9115
the asm-generic/sockios.h header no longer defines SIOCGSTAMP.
Instead it provides only SIOCGSTAMP_OLD, which only uses a
32-bit time_t on 32-bit architectures.
The linux/sockios.h header then defines SIOCGSTAMP using
either SIOCGSTAMP_OLD or SIOCGSTAMP_NEW as appropriate. If
SIOCGSTAMP_NEW is used, then the tv_sec field is 64-bit even
on 32-bit architectures
To cope with this we must now convert the old and new type from
the target to the host one.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Message-Id: <20190718130641.15294-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix a crash with LTP testsuite and aarch64:
tst_test.c:1015: INFO: Timeout per run is 0h 05m 00s
qemu-aarch64: .../qemu/accel/tcg/translate-all.c:2522: page_check_range: Assertion `start < ((target_ulong)1 << L1_MAP_ADDR_SPACE_BITS)' failed.
qemu:handle_cpu_signal received signal outside vCPU context @ pc=0x60001554
page_check_range() should never be called with address outside the guest
address space. This patch adds a guest_addr_valid() check in access_ok()
to only call page_check_range() with a valid address.
Fixes: f6768aa1b4 ("target/arm: fix AArch64 virtual address space size")
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190704084115.24713-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Structure ucontext for MIPS is defined in the following way in
Linux kernel:
(arch/mips/include/uapi/asm/ucontext.h, lines 54-64)
struct ucontext {
/* Historic fields matching asm-generic */
unsigned long uc_flags;
struct ucontext *uc_link;
stack_t uc_stack;
struct sigcontext uc_mcontext;
sigset_t uc_sigmask;
/* Extended context structures may follow ucontext */
unsigned long long uc_extcontext[0];
};
Fix the structure target_ucontext for MIPS to reflect the definition
above, except the correction for field uc_extcontext, which will
follow at some later time.
Fixes: 94c5495d
Reported-by: Dragan Mladjenovic <dmladjenovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1562931470-3700-2-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This pull request contains a handful of patches that I'd like to target
for the 4.1 soft freeze. There are a handful of new features:
* Support for the 1.11.0, the latest privileged specification.
* Support for reading and writing the PRCI registers.
* Better control over the ISA of the target machine.
* Support for the cpu-topology device tree node.
Additionally, there are a handful of bug fixes including:
* Load reservations are now broken by both store conditional and by
scheduling, which fixes issues with parallel applications.
* Various fixes to the PMP implementation.
* Fixes to the 32-bit linux-user syscall ABI.
* Various fixes for instruction decodeing.
* A fix to the PCI device tree "bus-range" property.
This boots 32-bit and 64-bit OpenEmbedded.
Changes since v2 [riscv-for-master-4.1-sf1-v2]:
* Dropped OpenSBI.
Changes since v1 [riscv-for-master-4.1-sf1]:
* Contains a fix to the sifive_u OpenSBI integration.
-----BEGIN PGP SIGNATURE-----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=lliO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.1-sf1-v3' into staging
RISC-V Patches for the 4.1 Soft Freeze, Part 2 v3
This pull request contains a handful of patches that I'd like to target
for the 4.1 soft freeze. There are a handful of new features:
* Support for the 1.11.0, the latest privileged specification.
* Support for reading and writing the PRCI registers.
* Better control over the ISA of the target machine.
* Support for the cpu-topology device tree node.
Additionally, there are a handful of bug fixes including:
* Load reservations are now broken by both store conditional and by
scheduling, which fixes issues with parallel applications.
* Various fixes to the PMP implementation.
* Fixes to the 32-bit linux-user syscall ABI.
* Various fixes for instruction decodeing.
* A fix to the PCI device tree "bus-range" property.
This boots 32-bit and 64-bit OpenEmbedded.
Changes since v2 [riscv-for-master-4.1-sf1-v2]:
* Dropped OpenSBI.
Changes since v1 [riscv-for-master-4.1-sf1]:
* Contains a fix to the sifive_u OpenSBI integration.
# gpg: Signature made Wed 03 Jul 2019 09:39:09 BST
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.1-sf1-v3: (32 commits)
hw/riscv: Extend the kernel loading support
hw/riscv: Add support for loading a firmware
hw/riscv: Split out the boot functions
riscv: sifive_u: Update the plic hart config to support multicore
riscv: sifive_u: Do not create hard-coded phandles in DT
disas/riscv: Fix `rdinstreth` constraint
disas/riscv: Disassemble reserved compressed encodings as illegal
riscv: virt: Add cpu-topology DT node.
RISC-V: Update syscall list for 32-bit support.
RISC-V: Clear load reservations on context switch and SC
RISC-V: Add support for the Zicsr extension
RISC-V: Add support for the Zifencei extension
target/riscv: Add support for disabling/enabling Counters
target/riscv: Remove user version information
target/riscv: Require either I or E base extension
qemu-deprecated.texi: Deprecate the RISC-V privledge spec 1.09.1
target/riscv: Set privledge spec 1.11.0 as default
target/riscv: Add the mcountinhibit CSR
target/riscv: Add the privledge spec version 1.11.0
target/riscv: Restructure deprecatd CPUs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU_IFLA_BR_MULTI_BOOLOPT has been added to the wrong function
host_to_target_slave_data_bridge_nlattr(). Move it to
host_to_target_data_bridge_nlattr().
This fixes following error:
Unknown QEMU_IFLA_BR type 46
Fixes: 61b463fbf6 ("linux-user: add new netlink types")
Message-Id: <20190626150855.27446-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Handle EXCP_FPE properly for MIPS in cpu loop.
Note that a vast majority of FP instructions are not affected by
the absence of the code in this patch, as they use alternative code
paths for handling floating point exceptions (see, for example,
invocations of update_fcr31()) - they rely on softfloat library for
keeping track on exceptions that needs to be raised. However, there
are few MIPS FP instructions (an example is CTC1) that use function
do_raise_exception() directly, and they need the case that is added
in this patch to propagate the FPE exception as designed.
The code is based on kernel's function force_fcr31_sig() in
arch/mips/kernel.traps.c.
Reported-by: Yunqiang Su <ysu@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1561718618-20218-6-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Bring target_flock definitions to be more in sync with the way
flock is defined in kernel.
Basically, the rules from the kernel are:
1. Majority of architectures have a common flock definition.
2. Architectures with 32-bit MIPS ABIs have a sligtly different
flock definition; those architectures are the only arcitectures
that have HAVE_ARCH_STRUCT_FLOCK defined, and that preprocessor
constant is used in the common header as a flag for including or
not including common flock definition.
3. Sparc architectures also have a sligtly different flock
definition, but the difference is only the padding at the end of
the structure. The presence of that padding is determined by
preprocessor constants __ARCH_FLOCK6_PAD and __ARCH_FLOCK64_PAD.
QEMU linux-user already implements rules 1. and 3. in a very
similar way as they are implemented in kernel. However, rule 2.
is implemented in a dissimilar way (for example, the constant
TARGET_HAVE_ARCH_STRUCT_FLOCK is missing), and this patch brings
QEMU implementation much closer to the kernel implementation.
TARGET_HAVE_ARCH_STRUCT_FLOCK64 constant is also introduced to
mimic HAVE_ARCH_STRUCT_FLOCK64 from kernel, but it is not defined
anywhere, however, this is the case with HAVE_ARCH_STRUCT_FLOCK64
in kernel as well.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1561718618-20218-5-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Among MIPS ABIs, only MIPS O32 and N32 have special (different
than other architectures) definition of structure flock in kernel.
Bring target_flock definition in QEMU for MIPS O64 ABI to the
correct state, which is currently different than the most common
definition, and it should actually be the same.
Reported-by: Dragan Mladjenovic <dmladjenovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1561718618-20218-4-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
All of the flags need to be conditional as old systems don't have
statx support. Otherwise it works the same as other stat family
syscalls. This requires the pending patch to add statx support.
Tested on Ubuntu 16.04 (no host statx) and Ubuntu 19.04 (with host
statx) using a riscv32-linux toolchain.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1561718618-20218-3-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Implement support for translation of system call statx().
The implementation is based on "best effort" approach: if host
is capable of executing statx(), host statx() is used. If not,
the implementation includes invoking a more mature system call
fstatat() on the host side to achieve as close as possible
functionality.
Support for statx() in kernel and glibc was, however, introduced
at different points of time (the difference is more than a year):
- kernel: Linux 4.11 (30 April 2017)
- glibc: glibc 2.28 (1 Aug 2018)
In this patch, the availability of statx() support is established
via __NR_statx (if it is defined, statx() is considered available).
This coincedes with statx() introduction in kernel.
However, the structure statx definition may not be available in
any header for hosts with glibc older than 2.28 (and it is, by
design, to be defined in one of glibc headers), even though the
full statx() functionality may be supported in kernel. Hence, a
structure "target_statx" is defined in this patch, to remove that
dependency on glibc headers, and to use statx() functionality as
soon as the host kernel is capable of supporting it. Such statx
structure definition is used for both target and host structures
statx (of course, this doesn't mean the endian arrangement is
the same on target and host - the endian conversion is done in
all necessary cases).
Signed-off-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1561718618-20218-2-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This interface has been introduced in 2005 with the
coldfire implementation (e6e5906b6e ColdFire target.)
and looks like to do what the linux-user interface already
does with the TRAP exception rather than the ILLEGAL
exception.
This interface has not been maintained since that.
The semi-hosting interface is not removed so coldfire kernel
with semi-hosting is always supported.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190524162049.806-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
32-bit RISC-V uses _llseek instead of lseek as syscall number 62.
Update syscall list from open-embedded build, primarily because
32-bit RISC-V requires statx support.
Tested with cross gcc testsuite runs for rv32 and rv64, with the
pending statx patch also applied.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The default CPU for pseries has been set to POWER9 by default.
We can use the same default for linux-user
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190609143521.19374-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
QEMU_PPC_FEATURE2_VEC_CRYPTO enables the use
of VSX instructions in libcrypto that are accelerated
by the TCG vector instructions now.
QEMU_PPC_FEATURE2_DARN allows to use the new builtin
qemu_guest_getrandom() function.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190609143521.19374-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add support for the option IPV6_<ADD|DROP>_MEMBERSHIP of the syscall
setsockopt(). This option controls membership in multicast groups.
Argument is a pointer to a struct ipv6_mreq.
The glibc <netinet/in.h> header defines the ipv6_mreq structure,
which includes the following members:
struct in6_addr ipv6mr_multiaddr;
unsigned int ipv6mr_interface;
Whereas the kernel in its <linux/in6.h> header defines following
members of the same structure:
struct in6_addr ipv6mr_multiaddr;
int ipv6mr_ifindex;
POSIX defines ipv6mr_interface [1].
__UAPI_DEF_IVP6_MREQ appears in kernel headers with v3.12:
cfd280c91253 net: sync some IP headers with glibc
Without __UAPI_DEF_IVP6_MREQ, kernel defines ipv6mr_ifindex, and
this is explained in cfd280c91253:
"If you include the kernel headers first you get those,
and if you include the glibc headers first you get those,
and the following patch arranges a coordination and
synchronization between the two."
So before 3.12, a program can't include both <netinet/in.h> and
<linux/in6.h>.
In linux-user/syscall.c, we only include <netinet/in.h> (glibc) and
not <linux/in6.h> (kernel headers), so ipv6mr_interface is the one
to use.
[1] http://pubs.opengroup.org/onlinepubs/009695399/basedefs/netinet/in.h.html
Signed-off-by: Neng Chen <nchen@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1560953834-29584-2-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add support for options SOL_ALG of the syscall setsockopt(). This
option is used in relation to Linux kernel Crypto API, and allows
a user to set additional information for the cipher operation via
syscall setsockopt(). The field "optname" must be one of the
following:
- ALG_SET_KEY – seting the key
- ALG_SET_AEAD_AUTHSIZE – set the authentication tag size
SOL_ALG is relatively newer setsockopt() option. Therefore, the
code that handles SOL_ALG is enclosed in "ifdef" so that the build
does not fail for older kernels that do not contain support for
SOL_ALG. "ifdef" also contains check if ALG_SET_KEY and
ALG_SET_AEAD_AUTHSIZE are defined.
Signed-off-by: Yunqiang Su <ysu@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1560953834-29584-3-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When we have updated kernel headers to 5.2-rc1 we have introduced
new syscall numbers that can be not supported by older kernels
and fail with ENOSYS while the guest emulation succeeded before
because the syscalls were emulated with ipc().
This patch fixes the problem by using ipc() if the new syscall
returns ENOSYS.
Fixes: 86e636951d ("linux-user: fix __NR_semtimedop undeclared error")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190529084804.25950-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is ostensibly to avoid the weirdness of len looking like it might
come from a guest and sometimes being used. While we are at it fix up
the error checking for the arm-linux-user implementation of the API
which got flagged up by Coverity (CID 1401700).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in
qemu-common.h. This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.
Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
Cleanup in the boilerplate that each target must define.
Replace xtensa_env_get_cpu with env_archcpu. The combination
CPU(xtensa_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Move cpu_get_tb_cpu_state below the include of "exec/cpu-all.h"
so that the definition of env_cpu is available.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace tilegx_env_get_cpu with env_archcpu. The combination
CPU(tilegx_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace sparc_env_get_cpu with env_archcpu. The combination
CPU(sparc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace sh_env_get_cpu with env_archcpu. The combination
CPU(sh_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace s390_env_get_cpu with env_archcpu. The combination
CPU(s390_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace riscv_env_get_cpu with env_archcpu. The combination
CPU(riscv_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace ppc_env_get_cpu with env_archcpu. The combination
CPU(ppc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace openrisc_env_get_cpu with env_archcpu. The combination
CPU(openrisc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace mips_env_get_cpu with env_archcpu. The combination
CPU(mips_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace mb_env_get_cpu with env_archcpu. The combination
CPU(mb_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Move cpu_mmu_index below the include of "exec/cpu-all.h",
so that the definition of env_archcpu is available.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
The combination CPU(m68k_env_get_cpu) should have used
ENV_GET_CPU to begin; use env_cpu now.
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace x86_env_get_cpu with env_archcpu. The combination
CPU(x86_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace hppa_env_get_cpu with env_archcpu. The combination
CPU(hppa_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace cris_env_get_cpu with env_archcpu. The combination
CPU(cris_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace arm_env_get_cpu with env_archcpu. The combination
CPU(arm_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace alpha_env_get_cpu with env_archcpu. The combination
CPU(alpha_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let's add all HWCAPs that we can support under TCG right now, when the
respective CPU facilities are enabled.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
CPU_DoubleU is primarily used to reinterpret between integer and floats.
We don't really need this functionality. So let's just keep it simple
and use an uint64_t.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
- semihosting re-factor (used in system tests)
- aarch64 and alpha system tests
- editorconfig tweak for .S
- some docker image updates
- iotests clean-up (without make check inclusion)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAlztYToACgkQ+9DbCVqe
KkQU9wf/Uv5qBgDn9MwcCt8tzHTX/i21QHwFLBbCmFoUwZjSridZ2KV6Ma3ig4mF
xY+8Cr5oZT186V+aD39K6KCZKqZRulIpRVNkOKXEfAAklUoAyQs95Wa8F8LtO1eG
vOtOYEdkXQQiAnlnQ+eaGiZQ2mpbCbREa10JrBhxp6iXh0PYcvtD7iAlOldqIvd2
hDRwOgTtYoiiKh6UdediAgQsRvv6oNPHFUOjWgrGxfhPWKbjCVKl7VS4furg9zux
j/S0E0xYKhj+JNq3arjiMUMl19TauCBQLrbQpphd1jOl1s7bELRjAuaKM60TVIbW
Hd2/PYbGnkpyUcJQh0Pr1cb4RMcznw==
=lvtu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-280519-2' into staging
Various testing updates
- semihosting re-factor (used in system tests)
- aarch64 and alpha system tests
- editorconfig tweak for .S
- some docker image updates
- iotests clean-up (without make check inclusion)
# gpg: Signature made Tue 28 May 2019 17:26:34 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-280519-2: (27 commits)
tests/qemu-iotests: re-format output to for make check-block
tests/qemu-iotests/group: Re-use the "auto" group for tests that can always run
Makefile.target: support per-target coverage reports
Makefile: include per-target build directories in coverage report
Makefile: fix coverage-report reference to BUILD_DIR
.travis.yml: enable aarch64-softmmu and alpha-softmmu tcg tests
tests/tcg/alpha: add system boot.S
tests/tcg/multiarch: expand system memory test to cover more
tests/tcg/minilib: support %c format char
tests/tcg/multiarch: move the system memory test
tests/tcg/aarch64: add system boot.S
editorconfig: add settings for .s/.S files
tests/tcg/multiarch: add hello world system test
tests/tcg/multiarch: add support for multiarch system tests
tests/docker: Test more components on the Fedora default image
tests/docker: add ubuntu 18.04
MAINTAINERS: update for semihostings new home
target/mips: convert UHI_plog to use common semihosting code
target/mips: only build mips-semi for softmmu
target/arm: correct return values for WRITE/READ in arm-semi
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJc6rmrAAoJENSXKoln91pleiIH/iII48dveAe846j+leRJzvq0
xwykZ+uc1gM8vwHjJmQL2iz8BSx9irYg68jNgZNw+0/7pOqKVkyDt7T9CMpNIgI/
xsbaX3ta90Rhw6Cnw9h99SsWJAg2Oq4Phv7yCIgDMoNmph/caZyd/95ThmmQ2MXr
BDOehxODcDyJAO3KIMODccuD6R0ofM2JKXUk2S5s7v1FjYm5fxfzOcx8P4P4lGP3
AB/k+iVMaEaZJWDHhPXte/5tF9aW8s39CUoe0BE/Cqje3ehLEY/6XxMamXiaWf/G
2taLvJ6lZ1T5nRmcTCBFfO4Sk3BEBeGlqF72nIlzeCJCe9SvISfwEhsHNkfsqiE=
=hSSg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-may-19-2019-v3' into staging
MIPS queue for May 19th, 2019 - v3
# gpg: Signature made Sun 26 May 2019 17:07:07 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-may-19-2019-v3:
BootLinuxSshTest: Test some userspace commands on Malta
target/mips: realign comments to fix checkpatch warnings
target/mips: add or remove space to fix checkpatch errors
linux-user: fix __NR_semtimedop undeclared error
mips: Decide to map PAGE_EXEC in map_address
target/mips: Refactor and fix INSERT.<B|H|W|D> instructions
target/mips: Refactor and fix COPY_U.<B|H|W> instructions
target/mips: Refactor and fix COPY_S.<B|H|W|D> instructions
target/mips: Fix MSA instructions ST.<B|H|W|D> on big endian host
target/mips: Fix MSA instructions LD.<B|H|W|D> on big endian host
target/mips: Make the results of MOD_<U|S>.<B|H|W|D> the same as on hardware
target/mips: Make the results of DIV_<U|S>.<B|H|W|D> the same as on hardware
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now we have a common semihosting console interface use that for our
string output. However ARM is currently unique in also supporting
semihosting for linux-user so we need to replicate the API in
linux-user. If other architectures gain this support we can move the
file later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In current code, __NR_msgrcv and__NR_semtimedop are supposed to be
defined if __NR_msgsnd is defined.
But linux headers 5.2-rc1 for MIPS define __NR_msgsnd without defining
__NR_semtimedop and it breaks the QEMU build.
__NR_semtimedop is defined in asm-mips/unistd_n64.h and asm-mips/unistd_n32.h
but not in asm-mips/unistd_o32.h.
Commit d9cb433615 ("linux headers: update against Linux 5.2-rc1") has
updated asm-mips/unistd_o32.h and added __NR_msgsnd but not __NR_semtimedop.
It introduces __NR_semtimedop_time64 instead.
This patch fixes the problem by checking for each __NR_XXX symbol
before defining the corresponding syscall.
Fixes: d9cb433615 ("linux headers: update against Linux 5.2-rc1")
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190523175413.14448-1-laurent@vivier.eu>
Since Linux 2.6 the stat syscalls have mostly supported nanosecond
components for each of the file-related timestamps.
QEMU user mode emulation currently does not pass through the nanosecond
portion of the timestamp, even when the host system fills in the value.
This results in a mismatch when run on subsecond resolution filesystems
such as ext4 or XFS.
An example of this leading to inconsistency is cross-debootstraping a
full desktop root filesystem of Debian Buster. Recent versions of
fontconfig store the full timestamp (instead of just the second portion)
of the directory in its per-directory cache file, and checks this against
the directory to see if the cache is up-to-date. With QEMU user mode
emulation, the timestamp stored is incorrect, and upon booting the rootfs
natively, fontconfig discovers the mismatch, and proceeds to rebuild the
cache on the comparatively slow machine (low-power ARM vs x86). This
stalls the first attempt to open whatever application that incorporates
fontconfig.
This patch renames the "unused" padding trailing each timestamp element
to its nanosecond counterpart name if such an element exists in the
kernel sources for the given platform. Not all do. Then have the syscall
wrapper fill in the nanosecond portion if the host supports it, as
specified by the _POSIX_C_SOURCE and _XOPEN_SOURCE feature macros.
Recent versions of glibc only use stat64 and newfstatat syscalls on
32-bit and 64-bit platforms respectively. The changes in this patch
were tested by directly calling the stat, stat64 and newfstatat syscalls
directly, in addition to the glibc wrapper, on arm and aarch64 little
endian targets.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Message-Id: <20190522162147.26303-1-wens@kernel.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
For those hosts with SHMLBA > getpagesize, we don't automatically
select a guest address that is compatible with the host. We can
achieve this by boosting the alignment of guest_base and by adding
an extra alignment argument to mmap_find_vma.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190519201953.20161-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Sanitize interp_info structure in load_elf_binary() and, for MIPS only,
init its field fp_abi to MIPS_ABI_FP_UNKNOWN. This fixes appearances of
"Unexpected FPU mode" message in some MIPS use cases. Currently, this
bug is a complete stopper for some MIPS binaries.
In load_elf_binary(), struct image_info interp_info is used without
being properly initialized. One result is that when the ELF's program
header doesn't contain an entry for the ABI flags, then the value of
the struct image_info's fp_abi field is set to whatever happened to
be in stack memory at the time.
Backporting to 4.0 and, if possible, to 3.1 is recommended.
Fixes: https://bugs.launchpad.net/qemu/+bug/1825002
Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1558282527-22183-6-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add support for getting and setting extended private flags of a
network device via SIOCSIFPFLAGS and SIOCGIFPFLAGS ioctls.
The ioctl numeric values are platform-independent and determined by
the file include/uapi/linux/sockios.h in Linux kernel source code:
#define SIOCSIFPFLAGS 0x8934
#define SIOCGIFPFLAGS 0x8935
These ioctls get (or set) the field ifr_flags of type short in the
structure ifreq. Such functionality is achieved in QEMU by using
MK_STRUCT() and MK_PTR() macros with an appropriate argument, as
it was done for existing similar cases.
Signed-off-by: Neng Chen <nchen@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1554839486-3527-1-git-send-email-aleksandar.markovic@rt-rk.com>
Message-Id: <1558282527-22183-4-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add support for setting the process (or process group) to receive SIGIO
or SIGURG signals when I/O becomes possible or urgent data is available,
using SIOCSPGRP ioctl.
The ioctl numeric values for SIOCSPGRP are platform-dependent and are
determined by following files in Linux kernel source tree:
arch/ia64/include/uapi/asm/sockios.h:#define SIOCSPGRP 0x8902
arch/mips/include/uapi/asm/sockios.h:#define SIOCSPGRP _IOW('s', 8, pid_t)
arch/parisc/include/uapi/asm/sockios.h:#define SIOCSPGRP 0x8902
arch/sh/include/uapi/asm/sockios.h:#define SIOCSPGRP _IOW('s', 8, pid_t)
arch/xtensa/include/uapi/asm/sockios.h:#define SIOCSPGRP _IOW('s', 8, pid_t)
arch/alpha/include/uapi/asm/sockios.h:#define SIOCSPGRP _IOW('s', 8, pid_t)
arch/sparc/include/uapi/asm/sockios.h:#define SIOCSPGRP 0x8902
include/uapi/asm-generic/sockios.h:#define SIOCSPGRP 0x8902
Hence the different definition for alpha, mips, sh4, and xtensa.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1558282527-22183-3-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix support for the SIOCATMARK and SIOCGPGRP ioctls for xtensa by
correcting corresponding macro definition.
Values for TARGET_SIOCATMARK and TARGET_SIOCGPGRP are determined by
Linux kernel. Following relevant lines (obtained by grep) are from
the kernel source tree:
arch/ia64/include/uapi/asm/sockios.h:#define SIOCATMARK 0x8905
arch/mips/include/uapi/asm/sockios.h:#define SIOCATMARK _IOR('s', 7, int)
arch/parisc/include/uapi/asm/sockios.h:#define SIOCATMARK 0x8905
arch/sh/include/uapi/asm/sockios.h:#define SIOCATMARK _IOR('s', 7, int)
arch/xtensa/include/uapi/asm/sockios.h:#define SIOCATMARK _IOR('s', 7, int)
arch/alpha/include/uapi/asm/sockios.h:#define SIOCATMARK _IOR('s', 7, int)
arch/sparc/include/uapi/asm/sockios.h:#define SIOCATMARK 0x8905
include/uapi/asm-generic/sockios.h:#define SIOCATMARK 0x8905
arch/ia64/include/uapi/asm/sockios.h:#define SIOCGPGRP 0x8904
arch/mips/include/uapi/asm/sockios.h:#define SIOCGPGRP _IOR('s', 9, pid_t)
arch/parisc/include/uapi/asm/sockios.h:#define SIOCGPGRP 0x8904
arch/sh/include/uapi/asm/sockios.h:#define SIOCGPGRP _IOR('s', 9, pid_t)
arch/xtensa/include/uapi/asm/sockios.h:#define SIOCGPGRP _IOR('s', 9, pid_t)
arch/alpha/include/uapi/asm/sockios.h:#define SIOCGPGRP _IOR('s', 9, pid_t)
arch/sparc/include/uapi/asm/sockios.h:#define SIOCGPGRP 0x8904
include/uapi/asm-generic/sockios.h:#define SIOCGPGRP 0x8904
It is visible from above that xtensa should have the same definitions
as alpha, mips and sh4 already do. This patch brings QEMU to the accurate
state wrt these two ioctls.
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1558282527-22183-2-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Debian console-setup uses /proc/hardware to guess the keyboard layout.
If the file /proc/hardware cannot be opened, the installation fails.
This patch adds a pseudo /proc/hardware file to report the model of
the machine. Instead of reporting a known and fake model, it
reports "qemu-m68k", which is true, and avoids to set the configuration
for an Amiga/Apple/Atari and let the user to chose the good one.
Bug: https://github.com/vivier/qemu-m68k/issues/34
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190517133149.19593-3-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
SPARC libc6 debian package wants to check the cpu level to be
installed or not:
WARNING: This machine has a SPARC V8 or earlier class processor.
Debian lenny and later does not support such old hardware
any longer.
To avoid this, it only needs to know if the machine type is sun4u or sun4v,
for that it reads the information from /proc/cpuinfo.
Fixes: 9a93c152fc
("linux-user: fix UNAME_MACHINE for sparc/sparc64")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190517133149.19593-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This allows us to use a single syscall to initialize them all.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We no longer use rand() within linux-user.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a better interface for random numbers than rand() * 3.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a better interface for random numbers than rand * 16.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When not using -seed, we will use the crypto subsystem
for random numbers.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the -seed option is given, call qemu_guest_random_seed_main,
putting the subsystem into deterministic mode. Pass derived seeds
to each cpu created during clone; which is a no-op unless the
subsystem is in deterministic mode.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Record the software fp control register, as set by the
osf_setsysinfo syscall. Add those masked exceptions
to fpcr_exc_enable. Do not raise a signal for masked
fp exceptions.
Fixes: https://bugs.launchpad.net/bugs/1701835
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Changes to slirp/ dropped, as we're about to spin it off]
Reuse of the same guard symbol in multiple headers is okay as long as
they cannot be included together. scripts/clean-header-guards.pl
can't tell, so it warns.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
${target^^}_${fname^^} for linux-user/$target/$fname, just like we did
in commit a9c94277f0..3500385697.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When linux-user/exit was introduced we failed to move the gprof
include at the same time. The CI didn't notice because it only builds
system emulation. Fix it for those that still find gprof useful.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-Id: <20190502092728.32727-1-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The guest tends to get confused when it receives signals it doesn't
know about. Given the gprof magic has also set up it's own handler we
would do well to avoid stomping on it as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190502145846.26226-1-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some PT_LOAD segments may be completely zeroed out and their p_filesize
is zero, in that case the loader should just allocate a page that's at
least p_memsz bytes large (plus eventual alignment padding).
Calling zero_bss does this job for us, all we have to do is make sure we
don't try to mmap a zero-length page.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190503122007.lkjsvztgt4ycovac@debian>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In file included from /usr/include/string.h:494,
from include/qemu/osdep.h:101,
from linux-user/uname.c:20:
In function ‘strncpy’,
inlined from ‘sys_uname’ at linux-user/uname.c:94:3:
/usr/include/bits/string_fortified.h:106:10: warning: ‘__builtin_strncpy’ output may be truncated copying 64 bytes from a string of length 64 [-Wstringop-truncation]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We don't care where the NUL terminator in the original uname
field was. It suffices to copy the entire original field and
simply force a NUL terminator at the end of the new field.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190501144646.4851-1-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix this warning when building with GCC9 on Fedora 30:
In function ‘strncpy’,
inlined from ‘fill_psinfo’ at /home/alistair/qemu/linux-user/elfload.c:3208:12,
inlined from ‘fill_note_info’ at /home/alistair/qemu/linux-user/elfload.c:3390:5,
inlined from ‘elf_core_dump’ at /home/alistair/qemu/linux-user/elfload.c:3539:9:
/usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ specified bound 16 equals destination size [-Werror=stringop-truncation]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c4d2b1de9efadcf1c900b91361af9302823a72a9.1556666645.git.alistair.francis@wdc.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When running ssh over IPv6 with linux-user I faced this warning:
Unsupported setsockopt level=41 optname=67
setsockopt IPV6_TCLASS 32: Protocol not available:
This patch adds code to the linux-user emulatation for setting and
retrieving of a few missing IPV6 options, including IPV6_TCLASS.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It's either "GNU *Library* General Public License version 2" or "GNU
Lesser General Public License version *2.1*", but there was no "version
2.0" of the "Lesser" license. So assume that version 2.1 is meant here.
Message-Id: <1550073530-4138-1-git-send-email-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's either "GNU *Library* General Public License version 2" or "GNU
Lesser General Public License version *2.1*", but there was no "version
2.0" of the "Lesser" license. So assume that version 2.1 is meant here.
Acked-by: Stafford Horne <shorne@gmail.com>
Message-Id: <1550073577-4248-1-git-send-email-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "model[,option...]" string parsed by the function is not just
a CPU model. Rename the function and its argument to indicate it
expects the full "-cpu" option to be provided.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190417025944.16154-2-ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it. Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout. Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.
Drop the callback, and call qemu_printf() instead.
Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This commit adds a error_init() helper which calls
g_log_set_default_handler() so that glib logs (g_log, g_warning, ...)
are handled similarly to other QEMU logs. This means they will get a
timestamp if timestamps are enabled, and they will go through the
HMP monitor if one is configured.
This commit also adds a call to error_init() to the binaries
installed by QEMU. Since error_init() also calls error_set_progname(),
this means that *-linux-user, *-bsd-user and qemu-pr-helper messages
output with error_report, info_report, ... will slightly change: they
will be prefixed by the binary name.
glib debug messages are enabled through G_MESSAGES_DEBUG similarly to
the glib default log handler.
At the moment, this change will mostly impact SPICE logging if your
spice version is >= 0.14.1. With older spice versions, this is not going
to work as expected, but will not have any ill effect, so this call is
not conditional on the SPICE version.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190131164614.19209-3-cfergeau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The glibc-2.29.9000-6.fc31.x86_64 package finally includes the gettid()
function as part of unistd.h when __USE_GNU is defined. This clashes
with linux-user code which unconditionally defines this function name
itself.
/home/berrange/src/virt/qemu/linux-user/syscall.c:253:16: error: static declaration of ‘gettid’ follows non-static declaration
253 | _syscall0(int, gettid)
| ^~~~~~
/home/berrange/src/virt/qemu/linux-user/syscall.c:184:13: note: in definition of macro ‘_syscall0’
184 | static type name (void) \
| ^~~~
In file included from /usr/include/unistd.h:1170,
from /home/berrange/src/virt/qemu/include/qemu/osdep.h:107,
from /home/berrange/src/virt/qemu/linux-user/syscall.c:20:
/usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here
34 | extern __pid_t gettid (void) __THROW;
| ^~~~~~
CC aarch64-linux-user/linux-user/signal.o
make[1]: *** [/home/berrange/src/virt/qemu/rules.mak:69: linux-user/syscall.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:449: subdir-aarch64-linux-user] Error 2
While we could make our definition conditional and rely on glibc's impl,
this patch simply renames our definition to sys_gettid() which is a
common pattern in this file.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190320161842.13908-3-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The gettid syscall was introduced in Linux 2.4.11. This is old enough
that we can assume it always exists and thus not bother with the
conditional backcompat logic.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190320161842.13908-2-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of cleanup-trace-events.pl. Same funnies as in the
previous commit, of course. Manually shorten its change to
linux-user/trace-events to */signal.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This change checks elf_flags for EF_RISCV_RVE and if
present uses the RVE linux syscall ABI which uses t0
for the syscall number instead of a7.
Warn and exit if a non-RVE ABI binary is run on a
cpu with the RVE extension as it is incompatible.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Co-authored-by: Kito Cheng <kito.cheng@gmail.com>
Co-authored-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add QEMU_IFLA_BR_VLAN_STATS_PER_PORT (from linux v4.20),
QEMU_IFLA_BR_MULTI_BOOLOPT (from linux v5.0).
The first new entry fixes the following error:
Unknown QEMU_IFLA_BR type 45
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190306200925.17605-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fixes:
/home/elmarco/src/qemu/linux-user/syscall.c: In function ‘do_ioctl_rt’:
/home/elmarco/src/qemu/linux-user/syscall.c:4773:9: error: ‘host_rt_dev_ptr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (*host_rt_dev_ptr != 0) {
^~~~~~~~~~~~~~~~
/home/elmarco/src/qemu/linux-user/syscall.c:4774:9: error: ‘target_rt_dev_ptr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
unlock_user((void *)*host_rt_dev_ptr,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*target_rt_dev_ptr, 0);
~~~~~~~~~~~~~~~~~~~~~~
Based on previous discussion from patch "linux-users/syscall: make
do_ioctl_rt safer" by Alex Bennée.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190305151500.25038-1-marcandre.lureau@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
A zero-length read still needs to do the usual checks, thus it may return
errors like EBADF. This makes the read syscall emulation consistent with
the pread64 syscall emulation.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvm5zsxz2we.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Nios II user-mode emulation was missing handling for EXCP_DEBUG,
making the gdb stub essentially useless. This patch adds the missing
piece. The new code was copied from the existing EXCP_TRAP handling
and is also similar to what other targets (e.g., arm) do with EXCP_DEBUG.
Signed-off-by: Sandra Loosemore <sandra@codesourcery.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1550076626-7202-1-git-send-email-sandra@codesourcery.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
System calls that return a socket address do so by writing the (possibly
truncated) address into the provided buffer space, but setting the
addrlen parameter to the actual size of the address. To determine how
much to copy back to the target memory the emulation needs to remember
the incoming value of the addrlen parameter, so that it doesn't write
past the buffer limits.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmimxmppcj.fsf_-_@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The 32-bit kernel has strings for v4, v5, v6, v7, v7m.
The 64-bit kernel, in compat mode, has strings for v8.
Fixes: https://bugs.launchpad.net/bugs/1813034
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190212074840.13542-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Set msg_flags in the returned struct msghdr.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <mvmimxprmn8.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190219222952.22183-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The license information in these files is rather confusing. The text
declares LGPL first, but then says that contributions after 2012 are
licensed under the GPL instead. How should the average user who just
downloaded the release tarball know which part is now GPL and which
is LGPL?
Looking at the text of the LGPL (see COPYING.LIB in the top directory),
the license clearly states how this should be done instead:
"3. You may opt to apply the terms of the ordinary GNU General Public
License instead of this License to a given copy of the Library. To do
this, you must alter all the notices that refer to this License, so
that they refer to the ordinary GNU General Public License, version 2,
instead of to this License."
Thus let's clean up the confusing statements and use the proper GPL
text only.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1549456893-16589-1-git-send-email-thuth@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Userspace programs should (in theory) query the ELF HWCAP before
probing these registers. Now we have implemented them all make it
public.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190205190224.2198-6-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Completely rewrite conditional stores handling. Use cmpxchg.
This eliminates need for separate implementations of SC instruction
emulation for user and system emulation.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* Add riscv prefix to raise_exception function
* Add riscv prefix to CSR read/write functions
* Add riscv prefix to signal handler function
* Add riscv prefix to get fflags function
* Remove redundant declaration of riscv_cpu_init
and rename cpu_riscv_init to riscv_cpu_init
* rename riscv_set_mode to riscv_cpu_set_mode
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Coverity warns (CID 1390634) that open_net_route() is not
checking the return value from sscanf(), which means that
it might then use values that aren't initialized.
Errors here should in general not happen since we're passing
an assumed-good /proc/net/route from the host kernel, but
if we do fail to parse a line then just skip it in the output
we pass to the guest.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190205174207.9278-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Summary:
This is to fix bug https://bugs.launchpad.net/qemu/+bug/1796754.
It is valid for ifc_buf to be NULL according to
http://man7.org/linux/man-pages/man7/netdevice.7.html.
Signed-off-by: Kan Li <likan_999.student@sina.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20181024201303.114-1-likan_999.student@sina.com>
[lv: fix errors reported by checkpatch.pl]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190201195404.30486-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Initialize the keys to a non-zero value on process start.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's either "GNU *Library* General Public License version 2" or
"GNU Lesser General Public License version *2.1*", but there was
no "version 2.0" of the "Lesser" license. So assume that version
2.1 is meant here.
Also some files mention the GPL instead of the LGPL after declaring
that the files are licensed under the LGPL, so change these spots to
use LGPL, too.
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1548769438-28942-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Clang version 3.4.2 does not know the -Wpragmas option yet and bails
out with an error when we try to disable it in linux-user/qemu.h.
Fortunately, clang has a __has_warning() macro which allows us to add
an explicit check for the option that we want to ignore. With that we
can check for the availability of "-Waddress-of-packed-member" properly
and do not need the "-Wpragmas" at all here.
Fixes: 850d5e330a
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are not many, and they are all simple mistakes that ended up
being committed. Remove them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-2-pbonzini@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux returns success if pwrite64() or pread64() are called with a
zero length NULL buffer, but QEMU was returning -TARGET_EFAULT.
This is the same bug that we fixed in commit 58cfa6c2e6
for the write syscall, and long before that in 38d840e679
for the read syscall.
Fixes: https://bugs.launchpad.net/qemu/+bug/1810433
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190108184900.9654-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The VSX register array is a block of 64 128-bit registers where the first 32
registers consist of the existing 64-bit FP registers extended to 128-bit
using new VSR registers, and the last 32 registers are the VMX 128-bit
registers as show below:
64-bit 64-bit
+--------------------+--------------------+
| FP0 | | VSR0
+--------------------+--------------------+
| FP1 | | VSR1
+--------------------+--------------------+
| ... | ... | ...
+--------------------+--------------------+
| FP30 | | VSR30
+--------------------+--------------------+
| FP31 | | VSR31
+--------------------+--------------------+
| VMX0 | VSR32
+-----------------------------------------+
| VMX1 | VSR33
+-----------------------------------------+
| ... | ...
+-----------------------------------------+
| VMX30 | VSR62
+-----------------------------------------+
| VMX31 | VSR63
+-----------------------------------------+
In order to allow for future conversion of VSX instructions to use TCG vector
operations, recreate the same layout using an aligned version of the existing
vsr register array.
Since the old fpr and avr register arrays are removed, the existing callers
must also be updated to use the correct offset in the vsr register array. This
also includes switching the relevant VMState fields over to using subarrays
to make sure that migration is preserved.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <9d777f619840a8dd8e4f3834dcfc3bd28e052ccd.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <76f8f9383a766dbcade883e897dec8cfef669799.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform needed checks before actual prctl() PR_SET_FP_MODE and
PR_GET_FP_MODE work based on kernel implementation. Also, update
necessary hflags.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Coverity complains (CID 1390847) about some dead code in
do_sigreturn(). This is an if (err) clause that can never be
true, copied from the kernel (where __get_user returns an error).
The one code path that could report an error is in the
currently commented-out pseudocode for handling FPU register
restoring, so move the if into that comment (and fix the
broken indent in the comment in the process).
(The new position for the error check is also the semantically
correct one -- we should not restore the signal mask from
the signal frame if we get an error here, so the check must
be done before set_sigmask(), not after.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20181115114616.26265-1-peter.maydell@linaro.org
Add support for SO_REUSEPORT, including strace support. SO_REUSEPORT
was introduced relatively recently, since Linux 3.9, so use
'#if defined SO_REUSEPORT'.
Signed-off-by: Yunqiang Su <ysu@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1540904108-30873-4-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The nios2 main loop code's code does some odd
things with gdb_handlesig() that no other target
CPU does: it has some signals that are delivered
to gdb and only to gdb. Stop doing this, and instead
behave like all the other targets:
* a trap instruction becomes a SIGTRAP
* an unhandled exception type returned from cpu_exec()
causes us to abort(), not to try to hand gdb a SIGILL
This fixes in passing Coverity issue CID 1390853,
which was a complaint that the old code failed to
check the return value from gdb_handlesig().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181019174958.26616-3-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[lv: removed gdbsig unused variable]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The CPU main-loop routines for linux-user generally
call gdb_handlesig() when they're about to queue a
SIGTRAP signal. This is wrong, because queue_signal()
will cause us to pend a signal, and process_pending_signals()
will then call gdb_handlesig() itself. So the effect is that
we notify gdb of the SIGTRAP, and then if gdb says "OK,
continue with signal X" we will incorrectly notify
gdb of the signal X as well. We don't do this double-notify
for anything else, only SIGTRAP.
Remove this unnecessary and incorrect code from all
the targets except for nios2 (whose main loop is
doing something different and broken, and will be handled
in a separate patch).
This bug only manifests if the user responds to the reported
SIGTRAP using "signal SIGFOO" rather than "continue"; since
the latter is the overwhelmingly common thing to do after a
breakpoint most people won't have hit this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Remove some dead code spotted by Coverity (CID 1009855,
1390854, 1390847). The underlying cause in all these cases
is the same: QEMU's put_user operations can't result in
errors, but the kernel's equivalent does. So when code
was copied from the kernel signal-frame-setup/teardown
code, checks on error flags that were needed in the kernel
became dead code for us.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20181019161715.12122-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Coldfire defines an "Unsupported instruction" exception if execution
of a valid instruction is attempted but the required hardware is not
present in the processor.
We use it with instructions that are in fact undefined or illegal,
and the exception expected in this case by the kernel is the
illegal exception, so this patch fixes that.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181030165554.5761-1-laurent@vivier.eu>
Stack pointer alignment code incorrectly adds stack_size to sp instead
of subtracting it. It also does not take flat_argvp_envp_on_stack() into
account when calculating stack_size. This results in initial stack
pointer misalignment with certain set of command line arguments and
environment variables and correct alignment for the same binary with a
different set of arguments. This misalignment causes failures in the
following tests in the testsuite of gcc built for xtensa uclinux:
gcc.dg/torture/vshuf-v64qi.c
gcc.dg/torture/vshuf-v8sf.c
gcc.dg/torture/vshuf-v8si.c
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
-----BEGIN PGP SIGNATURE-----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=sHPv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging
QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
ppc: move at24c to its own CONFIG_ symbol
hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
tests/bios-tables-test: Remove an useless cast
xen: Use the PCI_DEVICE macro
qobject: Catch another straggler for use of qdict_put_str()
configure: Support pkg-config for zlib
tests: Fix typos in comments and help message (found by codespell)
cpu.h: fix a typo in comment
linux-user: fix comment s/atomic_write/atomic_set/
qemu-iotests: make 218 executable
scripts/qemu.py: remove trailing quotes on docstring
scripts/decodetree.py: remove unused imports
docs/devel/testing.rst: add missing newlines after code block
qemu-iotests: fix filename containing checks
tests/tcg/README: fix location for lm32 tests
memory.h: fix typos in comments
vga_int: remove unused function protype
configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement MIPS specific prctl() PR_SET_FP_MODE and PR_GET_FP_MODE emulation.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Floating-point mode is calculated from MIPS.abiflags FP ABI value
(based on kernel implementation). Illegal combinations are rejected.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Set fp_abi and interp_fp_abi values to current fp_abi value read from
MIPS.abiflags.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Read MIPS.abiflags section from ELF file into Mips_elf_abiflags_v0 struct.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add MIPS specific image_info struct fields fp_abi and interp_fp_abi
to store executable and interpreter fp_abi values (based on kernel
struct arch_elf_state in mips/include/asm/elf.h).
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJb0HIuAAoJENSXKoln91plGcUH/3Lje5KF8kkShQ5dIrH9e8Xz
bvK6lXOLNnndEyrWqJNLaJs7eJKEV2N+E2sBmdIjKnWXVHW6gOW3QBMuVGPTT4rg
C6cntrh2HpnxibgJqrR+3RmjQHAI1Ktixhker9LWimF3ZZhcy4H6mFHwW9z7eBK4
+n/pbnk8fq4FlGHJ2teHhctVIma6slmd8lkMa9vdwVQwpAyzpP82XjrsoTeeYhmG
uuTvX3TFnXKGa9mYGxybpwKd4i+397l9fTQ4egx1KlZMR8OHuQItCBDOFdiQpHOg
yljCeG3jHEhNzVf+xW7JU692Lz097otWDbzWDJibYGJkdkhKfyHJ9PvCYaPiK6M=
=Sg8J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2' into staging
MIPS queue for October 2018 - part 2 - v2
# gpg: Signature made Wed 24 Oct 2018 14:22:54 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2: (33 commits)
target/mips: Fix decoding of ALIGN and DALIGN instructions
target/mips: Fix the title of translate.c
linux-user/mips: Recognize the R5900 CPU model
target/mips: Define the R5900 CPU
tests/tcg/mips: Add tests for R5900 DIVU1
tests/tcg/mips: Add tests for R5900 DIV1
tests/tcg/mips: Add tests for R5900 MTLO1 and MTHI1
tests/tcg/mips: Add tests for R5900 MFLO1 and MFHI1
tests/tcg/mips: Add tests for R5900 three-operand MULTU1
tests/tcg/mips: Add tests for R5900 three-operand MULT1
tests/tcg/mips: Add tests for R5900 three-operand MULTU
tests/tcg/mips: Add tests for R5900 three-operand MULT
target/mips: Make R5900 DMULT[U], DDIV[U], LL[D] and SC[D] user only
target/mips: Support R5900 MOVN, MOVZ and PREF instructions from MIPS IV
target/mips: Support R5900 DIV1 and DIVU1 instructions
target/mips: Support R5900 MFLO1, MTLO1, MFHI1 and MTHI1 instructions
target/mips: Support R5900 three-operand MULT1 and MULTU1 instructions
target/mips: Support R5900 three-operand MULT and MULTU instructions
target/mips: Add a placeholder for R5900 MMI3 instruction subclass
target/mips: Add a placeholder for R5900 MMI2 instruction subclass
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This kind of ELF for the R5900 relies on an IEEE 754-1985 compliant FPU.
The R5900 FPU hardware is noncompliant and it is therefore emulated in
software by the Linux kernel. QEMU emulates a compliant FPU accordingly.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both arm and thumb2 division are controlled by the same ISAR field,
which takes care of the arm implies thumb case. Having M imply
thumb2 division was wrong for cortex-m0, which is v6m and does not
have thumb2 at all, much less thumb2 division.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the v8 extensions are self-contained within the ISAR
registers and are not implied by other feature bits, which
makes them the easiest to convert.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- request bflt support in configure;
- implement custom linux-user/xtensa/target_flat.h that doesn't put envp
on stack;
- fix #include "target_flat.h" in flatload.c so that it first search for
arch-customized version of the header.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Userspace submits a USB Request Buffer to the kernel, optionally
discards it, and finally reaps the URB. Thunk buffers from target
to host and back.
Tested by running an i386 scanner driver on ARMv7 and by running
the PowerPC lsusb utility on x86_64. The discardurb ioctl is
not exercised in these tests.
Signed-off-by: Cortland Tölva <cst@tolva.net>
Message-Id: <20181008163521.17341-4-cst@tolva.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add infrastructure for handling MIPS-specific prctl(). This is,
for now, just an empty placeholder. The real handling will be
implemented in subsequent patches.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add MIPS-specific prctl() options TARGET_PR_SET_FP_MODE and
TARGET_PR_SET_FP_MODE. These values are essentially copied from
linux kernel header include/uapi/linux/prctl.h.
This is done in a way consistent with a similar case of
aarch64-specific prctl() options TARGET_PR_SVE_SET_VL and
TARGET_PR_SVE_GET_VL.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Remove a comment suggesting that we need to call tb_flush()
after writing the SPARC signal frame trampoline insns.
This isn't necessary in QEMU, because (even if the guest
architecture requires explicit icache maintenance) we
ensure that memory writes result in invalidation of
translated code from that memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181009184017.15675-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Our __get_user_e() and __put_user_e() macros cause newer versions
of clang to generate false-positive -Waddress-of-packed-member
warnings if they are passed the address of a member of a packed
struct (see https://bugs.llvm.org/show_bug.cgi?id=39113).
Suppress these using the _Pragma() operator. Unfortunately
_Pragma() support in gcc is broken in some gcc versions and
in some usage contexts, so we limit the pragma usage here to clang.
To put in the pragmas we need to convert the macros from
expressions to statements, but all the callsites effectively
treat them as statements already so this is OK.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181009161814.21257-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
setrlimit guest calls that affect memory resources
(RLIMIT_{AS,DATA,STACK}) may interfere with QEMU internal memory
management. They may result in QEMU lockup because mprotect call in
page_unprotect would fail with ENOMEM error code, causing infinite loop
of SIGSEGV. E.g. it happens when running libstdc++ testsuite for xtensa
target on x86_64 host.
Don't call host setrlimit for memory-related resources.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20180917181314.22551-1-jcmvbkbc@gmail.com>
[lv: rebase on master]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Bring linux-user write(2) handling into line with linux for the case
of a 0-byte write with a NULL buffer. Based on a patch originally
written by Zhuowei Zhang.
Addresses https://bugs.launchpad.net/qemu/+bug/1716292.
>From Zhuowei Zhang's patch (https://lists.gnu.org/archive/html/qemu-devel/2017-09/msg08073.html):
Linux returns success for the special case of calling write with a
zero-length NULL buffer: compiling and running
int main() {
ssize_t ret = write(STDOUT_FILENO, NULL, 0);
fprintf(stderr, "write returned %ld\n", ret);
return 0;
}
gives "write returned 0" when run directly, but "write returned
-1" in QEMU.
This commit checks for this situation and returns success if
found.
Subsequent discussion raised the following questions (and my answers):
- Q. Should TARGET_NR_read pass through to safe_read in this
situation too?
A. I'm wary of changing unrelated code to the specific problem I'm
addressing. TARGET_NR_read is already consistent with Linux for
this case.
- Q. Do pread64/pwrite64 need to be changed similarly?
A. Experiment suggests not: both linux and linux-user yield -1 for
NULL 0-length reads/writes.
Signed-off-by: Tony Garnock-Jones <tonygarnockjones@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180908182205.GB409@mornington.dcs.gla.ac.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If the hostpage size is greater than the TARGET_PAGESIZE, the
target-pages of size TARGET_PAGESIZE are marked valid only till the
length requested during the elfload. The glibc attempts to consume unused
space in the last page of data segment(__libc_memalign() in
elf/dl-minimal.c). If PT_LOAD p_align is greater than or
equal to hostpage size, the GLRO(dl_pagesize) is actually the host pagesize
as set in the auxillary vectors. So, there is no explicit mmap request for
the remaining target-pages on the last hostpage. The glibc assumes that
particular space as available and subsequent attempts to use
those addresses lead to crash as the target_mmap has not marked them valid
for those target-pages.
The issue is seen when trying to chroot to 16.04-x86_64 ubuntu on a PPC64
host where the fork fails to access the thread_id as it is allocated on a
page not marked valid. The recent glibc doesn't have checks for thread-id in
fork, but the issue can manifest somewhere else, none the less.
The fix here is to map all the target-pages of the hostpage during the
elfload if the p_align is greater than or equal to hostpage size, for
data segment to allow the glibc for proper consumption.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <153553435604.51992.5640085189104207249.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Original implementation for setsockopt by Chen Gang[1]; all bugs mine,
including removing assignment for optname which hopefully makes the
logic easier to follow and moving some variables to make the code
more selfcontained.
[1] http://patchwork.ozlabs.org/patch/565659/
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Co-Authored-By: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180824085601.6259-1-carenas@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will ease to move out syscall functions from syscall.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180823222215.13781-1-laurent@vivier.eu>
This adds the HWCAP2 bit to detect if a linux user process is
running on an ISA 3.0 compliant cpu like POWER9. This can be
verified using a simple test program that prints the value in
the auxiliary vector for AT_HWCAP2 as shown below.
Before:
$ qemu-ppc64le -cpu power8 test
0x8c000000
$ qemu-ppc64le -cpu power9 test
0x8c000000
After:
$ qemu-ppc64le -cpu power8 test
0x8c000000
$ qemu-ppc64le -cpu power9 test
0x8c800000
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
nanoMIPS is always NaN2008 compliant, and rules for checking
FCR31's NAN2008 bit are obsoleted.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Starting from nanoMIPS introduction, machine variant can be
EM_MIPS or EM_NANOMIPS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Implement support for nanoMIPS LLWP/SCWP instructions. Beside
adding core functionality of these instructions, this patch adds
support for availability control via configuration bit XNP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlt+5OYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPtxwf8CQM/F+0L+EKeYfYcVgVZsDhhOkLj
Pm61q0bZsWKLby5jCqIDYw7Z/vodJnSS1DO0slIRoXxvQ9DwlkbBnBy/aG/E9U0q
WF1vbCezibDIt7sGcsu9F5zXU9eqe+E6dZfxFrv8FQSOFVxn34TfeJagWLCtzg0d
LnVTF/e4zJD8IQiM7w6lJQxua3fz13ssPEg2KnMkguDhACMwvZ/K/cA2AJkHRMhY
sroPMwLHlrF1NOoeCIrWxYUmSGCRCAy1DmiPGiiSs0yBq/dL0UkAa5Eu6HMQ7rgI
zUff3JDmzEjixUSIEbpVRN+yPCN0/ACSOpJUrKLDxXbc4nZ+PBQ04YpyPQ==
=UZiV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
# gpg: Signature made Thu 23 Aug 2018 17:46:30 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
KVM: cleanup unnecessary #ifdef KVM_CAP_...
target/i386: update MPX flags when CPL changes
i2c: pm_smbus: Add the ability to force block transfer enable
i2c: pm_smbus: Don't delay host status register busy bit when interrupts are enabled
i2c: pm_smbus: Add interrupt handling
i2c: pm_smbus: Add block transfer capability
i2c: pm_smbus: Make the I2C block read command read-only
i2c: pm_smbus: Fix the semantics of block I2C transfers
i2c: pm_smbus: Clean up some style issues
pc-dimm: assign and verify the "addr" property during pre_plug
pc: drop memory region alignment check for 0
util/oslib-win32: indicate alignment for qemu_anon_ram_alloc()
pc-dimm: assign and verify the "slot" property during pre_plug
ipmi: Use proper struct reference for BT vmstate
vhost-scsi: expose 't10_pi' property for VIRTIO_SCSI_F_T10_PI
vhost-scsi: unify vhost-scsi get_features implementations
vhost-user-scsi: move host_features into VHostSCSICommon
cpus: allow cpu_get_ticks out of BQL
cpus: protect TimerState writes with a spinlock
seqlock: add QemuLockable support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Iterating over the list without using atomics is undefined behaviour,
since the list can be modified concurrently by other threads (e.g.
every time a new thread is created in user-mode).
Fix it by implementing the CPU list as an RCU QTAILQ. This requires
a little bit of extra work to traverse list in reverse order (see
previous patch), but other than that the conversion is trivial.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-12-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no point in listing a syscall if you want the same effect as
not listing it. In one less trivial case, the goto was demonstrably
not reachable.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180818190118.12911-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Transform outermost "break" to "return ret". If the immediately
preceeding statement was an assignment to ret, return the value
directly.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180818190118.12911-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There was supposed to be a single point of return for do_syscall
so that tracing works properly. However, there are a few bugs
in that area. It is significantly simpler to simply split out
an inner function to enforce this.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180818190118.12911-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is redundant with both -strace and actual tracing.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180818190118.12911-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Following commit will introduce RTA_PREF that appears only with
kernel v4.1. To avoid to manage a specific case for it, this patch
introduces the full list of rtattr_type_t prefixed with QEMU_ (as we
did for IFLA values)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-3-laurent@vivier.eu>
[lv: added more RTA_* from linux v4.18]
If recvmsg()/recvfrom() are used with the MSG_TRUNC flag, they return the
real length even if it was longer than the passed buffer.
So when we translate the buffer we must check we don't go beyond the
end of the buffer.
Bug: https://github.com/vivier/qemu-m68k/issues/33
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-2-laurent@vivier.eu>
sparc32plus has 64bit long type but only 32bit virtual address space.
For instance, "apt-get upgrade" failed because of a mmap()/msync()
sequence.
mmap() returned 0xff252000 but msync() used g2h(0xffffffffff252000)
to find the host address. The "(target_ulong)" in g2h() doesn't fix the
address because it is 64bit long.
This patch introduces an "abi_ptr" that is set to uint32_t
if the virtual address space is addressed using 32bit in the linux-user
case. It stays set to target_ulong with softmmu case.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180814171217.14680-1-laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[lv: added "%" in TARGET_ABI_FMT_ptr "%"PRIx64]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbdbIoAAoJENSXKoln91pl9KwIAJQ0CB4V/eRlvPOj828qLJyt
FxCETpCKBD1mSRX80E2HdYdaj8KfhhKrd9R2Wrk2VsiTQhLA0+hYsLxuT8VfPjsX
8WSN7egxzzA8Hzm1+wbwFCDNL13xjuhHWPk9YA1RYS6eQJot/Y27KYfvt/OPTrBO
jGaTmvXOE9q3qXZczP2TwipYkehg1+Ss5ZJl7dUmHc3Iek5t/H+kumkhBPoJqwAQ
wcwQuPm2KRGLuq9aB2IVbtfJA5Rme1GMFDWZicitJX2uK+Mx76fgi9IorrW6XAyM
6LM8DjvrivxW+UgZ+3QdJKkQCbyIrXqDAp1MRd3CWMlB576WWKm6RUTZclSo9gI=
=m1CJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-aug-2018' into staging
MIPS queue Aug 16, 2018
# gpg: Signature made Thu 16 Aug 2018 18:19:36 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-aug-2018:
qemu-doc: Amend MIPS-related items
linux-user: Add preprocessor availability control to some syscalls
linux-user: Update MIPS syscall numbers up to kernel 4.18 headers
elf: Add ELF flags for MIPS machine variants
elf: Remove duplicate preprocessor constant definition
target/mips: Check ELPA flag only in some cases of MFHC0 and MTHC0
target/mips: Don't update BadVAddr register in Debug Mode
target/mips: Implement CP0 Config1.WR bit functionality
target/mips: Add CP0 BadInstrX register
target/mips: Update some CP0 registers bit definitions
target/mips: Fix two instances of shadow variables
target/mips: Mark switch fallthroughs with interpretable comments
target/mips: Avoid case statements formulated by ranges - part 2
target/mips: Avoid case statements formulated by ranges - part 1
MAINTAINERS: Update target/mips maintainer's email addresses
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add ability to target platforms to individually include user-mode
support for system calls from "stat" group of system calls.
This change is related to new nanoMIPS platform in the sense that
it supports a different set of "stat" system calls than any other
target. nanoMIPS does not support structures stat and stat64 at
all. Also, support for certain number of other system calls is
dropped in nanoMIPS (those are most of the time obsoleted system
calls).
Without this patch, build for nanoMIPS would fail.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Synchronize content of linux-user/mips/syscall_nr.h and
linux-user/mips64/syscall_nr.h with Linux kernel 4.18 headers.
This adds 9 new syscall numbers, the last being NR_io_pgetevents.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
This allows the default (and maximum) vector length to be set
from the command-line. Which is extraordinarily helpful in
debugging problems depending on vector length without having to
bake knowledge of PR_SET_SVE_VL into every guest binary.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
r11 is a volatile register on PPC as per calling conventions.
The safe_syscall code uses it to check if the signal_pending
is set during the safe_syscall. When a syscall is interrupted
on return from signal handling, the r11 might be corrupted
before we retry the syscall leading to a crash. The registers
r0-r13 are not to be used here as they have
volatile/designated/reserved usages.
Change the code to use r14 which is non-volatile.
Use SP+16 which is a slot for LR, for save/restore of previous value
of r14. SP+16 can be used, as LR is preserved across the syscall.
Steps to reproduce:
On PPC host, issue `qemu-x86_64 /usr/bin/cc -E -`
Attempt Ctrl-C, the issue is reproduced.
Reference:
https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi-1.9.html#REGhttps://openpowerfoundation.org/wp-content/uploads/2016/03/ABI64BitOpenPOWERv1.1_16July2015_pub4.pdf
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <153301568965.30312.10498134581068746871.stgit@dhcp-9-109-246-16>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
I've slightly re-organised the check to more closely match the
sequence that the kernel uses in do_mmap(). We check for both the zero
case (EINVAL) and the overflow length case (ENOMEM).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: umarcor <1783362@bugs.launchpad.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180730134321.19898-2-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This allows the tests generated by debian-powerpc-user-cross
to function properly, especially tests/test-coroutine.
Technically this syscall is available to both ppc32 and ppc64,
but only ppc32 glibc actually uses it. Thus the ppc64 path is
untested.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180718200648.22529-1-richard.henderson@linaro.org>
When we try to use some targets on ppc64, it can happen the target
doesn't support the host page size to align ELF load sections and
fails with:
ELF load command alignment not page-aligned
Since commit a70daba377 ("linux-user: Tell guest about big host
page sizes") the host page size is used to align ELF sections, but
this doesn't work if the alignment required by the load section is
smaller than the host one. For these cases, we continue to use the
TARGET_PAGE_SIZE instead of the host one.
I have tested this change on ppc64, and it fixes qemu linux-user for:
s390x, m68k, i386, arm, aarch64, hppa
and I have tested it doesn't break the following targets:
x86_64, mips64el, sh4
mips and mipsel abort, but I think for another reason.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[lv: fixed "info->alignment = 0"]
Message-Id: <20180716195349.29959-1-laurent@vivier.eu>
If this is not done, qemu would drop any control message after the first
one.
This is because glibc's `CMSG_NXTHDR` macro accesses the uninitialized
cmsghdr's length field in order to find out if the message fits into the
`msg_control` buffer, wrongly assuming that it doesn't because the
length field contains garbage. Accessing the length field is fine for
completed messages we receive from the kernel, but is - as far as I know
- not needed since the kernel won't return such an invalid cmsghdr in
the first place.
This is tracked as this glibc bug:
https://sourceware.org/bugzilla/show_bug.cgi?id=13500
It's probably also a good idea to bail with an error if `CMSG_NXTHDR`
returns NULL but `TARGET_CMSG_NXTHDR` doesn't (ie. we still expect
cmsgs).
Signed-off-by: Jonas Schievink <jonasschievink@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180711221244.31869-1-jonasschievink@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The value given by mmap_find_vma_reserved() is used with mmap(),
so it is needed to be aligned with the host page size.
Since commit 18e80c55bb, reserved_va is only aligned to TARGET_PAGE_SIZE,
and it works well if this size is greater or equal to the host page size.
But ppc64 hosts have 64kB page size and when we start a 4kiB page size
guest (like i386), it fails when it tries to mmap the stack:
mmap stack: Invalid argument
Fixes: 18e80c55bb (linux-user: Tidy and enforce reserved_va initialization)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180714193553.30846-1-laurent@vivier.eu>
Commit 435da5e709 didn't convert a fcntl() call to safe_fcntl()
for TARGET_NR_fcntl64 case. There is no reason to not use it
in this case.
Fixes: 435da5e709 linux-user: Use safe_syscall wrapper for fcntl
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180713125805.10749-1-laurent@vivier.eu>
Qemu includes the glibc headers for the host defines and target headers are
part of the qemu source themselves. The glibc has the F_GETLK64, F_SETLK64
and F_SETLKW64 defined to 12, 13 and 14 for all archs in
sysdeps/unix/sysv/linux/bits/fcntl-linux.h. The linux kernel generic
definition for F_*LK is 5, 6 & 7 and F_*LK64* is 12,13, and 14 as seen in
include/uapi/asm-generic/fcntl.h. On 64bit machine, by default the kernel
assumes all F_*LK to 64bit calls and doesnt support use of F_*LK64* as
can be seen in include/linux/fcntl.h in linux source.
On x86_64 host, the values for F_*LK64* are set to 5, 6 and 7
explicitly in /usr/include/x86_64-linux-gnu/bits/fcntl.h by the glibc.
Whereas, a PPC64 host doesn't have such a definition in
/usr/include/powerpc64le-linux-gnu/bits/fcntl.h by the glibc. So,
the sources on PPC64 host sees the default value of F_*LK64*
as 12, 13 & 14(fcntl-linux.h).
Since the 64bit kernel doesnt support 12, 13 & 14; the glibc fcntl syscall
implementation(__libc_fcntl*(), __fcntl64_nocancel) does the F_*LK64* value
convertion back to F_*LK* values on PPC64 as seen in
sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h with FCNTL_ADJUST_CMD()
macro. Whereas on x86_64 host the values for F_*LK64* are set to 5, 6 and 7
and no adjustments are needed.
Since qemu doesnt use the glibc fcntl, but makes the safe_syscall* on its
own, the PPC64 qemu is calling the syscall with 12, 13, and 14(without
adjustment) and they all fail. The fcntl calls to F_GETLK/F_SETLK|W all
fail by all pplications run on PPC64 host user emulation.
The fix here could be to see why on PPC64 the glibc is still keeping
F_*LK64* different from F_*LK and why adjusting them to 5, 6 and 7 before
the syscall for PPC only. See if we can make the
/usr/include/powerpc64le-linux-gnu/bits/fcntl.h to have the values
5, 6 & 7 just like x86_64 and remove the adjustment code in glibc. That
way, qemu sources see the kernel supported values in glibc headers.
OR
On PPC64 host, qemu sources see both F_*LK & F_*LK64* as same and set to
12, 13 and 14 because __USE_FILE_OFFSET64 is defined in qemu
sources(also refer sysdeps/unix/sysv/linux/bits/fcntl-linux.h).
Do the value adjustment just like it is done by glibc source by using
F_GETLK value of 5. That way, we make the syscalls with the actual
supported values in Qemu. The patch is taking this approach.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <153148521235.87746.14142430397318741182.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This can still be reported using the "-d unimp" command line option.
Code change produced with:
git ls-files linux-user | \
xargs sed -i -E 's/fprintf\(stderr,\s?(".*not implemented\\n")\);/qemu_log_mask(LOG_UNIMP, \1);/g'
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180706155127.7483-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This can still be reported using the "-d unimp" command line option.
Fixes: https://bugs.launchpad.net/qemu/+bug/1777226
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180706155127.7483-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
As we don't always take the normal exit path when running a guest we
can skip the normal exit destructors where gcov normally dumps it's
info. The GCC manual suggests long running programs use __gcov_dump()
to flush out the coverage state periodically so we use that here.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
To avoid repeating ourselves move our preexit clean-up code into a
helper function. I figured the continuing effort to split of the
syscalls made it worthwhile creating a new file for it now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Mostly patches from Richard Henderson fixing multiple things:
* Fix singlestepping in GDB.
* Use more TB linking.
* Fixes to exit TB after updating SPRs to enable registering of state
changes.
* Significant optimizations and refactors to the TLB
* Split out disassembly from translation.
* Add qemu-or1k to qemu-binfmt-conf.sh.
* Implement signal handling for linux-user.
Then there are a few fixups from me:
* Fix delay slot detections to match hardware, this was masking a bug
in the linus kernel.
* Fix stores to the PIC mask register
-----BEGIN PGP SIGNATURE-----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=mbu2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/shorne/tags/pull-or-20180703' into staging
OpenRISC cleanups and Fixes for QEMU 3.0
Mostly patches from Richard Henderson fixing multiple things:
* Fix singlestepping in GDB.
* Use more TB linking.
* Fixes to exit TB after updating SPRs to enable registering of state
changes.
* Significant optimizations and refactors to the TLB
* Split out disassembly from translation.
* Add qemu-or1k to qemu-binfmt-conf.sh.
* Implement signal handling for linux-user.
Then there are a few fixups from me:
* Fix delay slot detections to match hardware, this was masking a bug
in the linus kernel.
* Fix stores to the PIC mask register
# gpg: Signature made Tue 03 Jul 2018 14:44:10 BST
# gpg: using RSA key C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* remotes/shorne/tags/pull-or-20180703: (25 commits)
target/openrisc: Fix writes to interrupt mask register
target/openrisc: Fix delay slot exception flag to match spec
linux-user: Fix struct sigaltstack for openrisc
linux-user: Implement signals for openrisc
target/openrisc: Add support in scripts/qemu-binfmt-conf.sh
target/openrisc: Reorg tlb lookup
target/openrisc: Increase the TLB size
target/openrisc: Stub out handle_mmu_fault for softmmu
target/openrisc: Use identical sizes for ITLB and DTLB
target/openrisc: Fix cpu_mmu_index
target/openrisc: Fix tlb flushing in mtspr
target/openrisc: Reduce tlb to a single dimension
target/openrisc: Merge mmu_helper.c into mmu.c
target/openrisc: Remove indirect function calls for mmu
target/openrisc: Merge tlb allocation into CPUOpenRISCState
target/openrisc: Form the spr index from tcg
target/openrisc: Exit the TB after l.mtspr
target/openrisc: Split out is_user
target/openrisc: Link more translation blocks
target/openrisc: Fix singlestep_enabled
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée