spapr_tce_table_finalize() can SEGV if the object was not previously
realized. In particular this can be triggered by running
qemu-system-ppc -device spapr-tce-table,?
The basic problem is that we have mismatched initialization versus
finalization: spapr_tce_table_finalize() is attempting to undo things that
are done in spapr_tce_table_realize(), not an instance_init function.
Therefore, replace spapr_tce_table_finalize() with
spapr_tce_table_unrealize().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
If a TCG guest reboots during a running migration HTAB entries are not
marked dirty, and the destination boots with an invalid HTAB.
When a reboot occurs, explicitly mark the current HTAB dirty after
clearing it.
Signed-off-by: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The n_valid and n_invalid fields are unsigned short integers but it is
possible to have more than 65535 entries in a contiguous hunk, overflowing
the field. This results in an incorrect HTAB being sent to the destination
during migration.
Signed-off-by: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
If a guest reboots during a running migration, changes to the
hash page table are not necessarily updated on the destination.
Opening a new file descriptor to the HTAB forces the migration
handler to resend the entire table.
Signed-off-by: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The e500 PCI controller has configurable windows that allow a guest OS
to selectively map parts of the PCI bus space to CPU address space and
to selectively map parts of the CPU address space for DMA requests into
PCI visible address ranges.
So far, we've simply assumed that this mapping is 1:1 and ignored it.
However, the PCICSRBAR (CCSR mapped in PCI bus space) always has to live
inside the first 32bits of address space. This means if we always treat
all mappings as 1:1, this map will collide with our RAM map from the CPU's
point of view.
So this patch adds proper ATMU support which allows us to keep the PCICSRBAR
below 32bits local to the PCI bus and have another, different window to PCI
BARs at the upper end of address space. We leverage this on e500plat though,
mpc8544ds stays virtually 1:1 like it was before, but now also goes via ATMU.
With this patch, I can run guests with lots of RAM and not coincidently access
MSI-X mappings while I really want to access RAM.
Signed-off-by: Alexander Graf <agraf@suse.de>
The mpc8544ds board only supports up to 3GB of RAM due to its limited
address space.
When the user requests more, abort and tell him that he should use less.
Signed-off-by: Alexander Graf <agraf@suse.de>
On e500 we're basically guaranteed to have 36bits of physical address space
available for our enjoyment. Older chips (like the mpc8544) only had 32bits,
but everything from e500v2 onwards bumped it up.
It's reasonably safe to assume that if you're using the PV machine, your guest
kernel is configured to support 36bit physical address space. So in order to
support more guest RAM, we can move CCSR and other MMIO windows right below the
end of our 36bit address space, just like later SoC versions of e500 do.
With this patch, I'm able to successfully spawn an e500 VM with -m 48G.
Signed-off-by: Alexander Graf <agraf@suse.de>
We want to have different MMIO region offsets for the mpc8544ds machine
and our e500 PV machine, so move the definitions of those into the machine
specific params struct.
Signed-off-by: Alexander Graf <agraf@suse.de>
* enable 32-bit EL3 (TrustZone) for vexpress and virt boards
* add fw_cfg device to virt board for UEFI firmware config
* support passing commandline kernel/initrd to firmware
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MhXg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20141223' into staging
target-arm queue:
* enable 32-bit EL3 (TrustZone) for vexpress and virt boards
* add fw_cfg device to virt board for UEFI firmware config
* support passing commandline kernel/initrd to firmware
# gpg: Signature made Tue 23 Dec 2014 13:50:33 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20141223: (31 commits)
hw/arm/virt: enable passing of EFI-stubbed kernel to guest UEFI firmware
hw/arm: pass pristine kernel image to guest firmware over fw_cfg
hw/loader: split out load_image_gzipped_buffer()
arm: add fw_cfg to "virt" board
fw_cfg_mem: expose the "data_width" property with fw_cfg_init_mem_wide()
fw_cfg_mem: introduce the "data_width" property
exec: allows 8-byte accesses in subpage_ops
fw_cfg_mem: flip ctl_mem_ops and data_mem_ops to DEVICE_BIG_ENDIAN
fw_cfg_mem: max access size and region size are the same for data register
fw_cfg: move boards to fw_cfg_init_io() / fw_cfg_init_mem()
fw_cfg: hard separation between the MMIO and I/O port mappings
target-arm: add cpu feature EL3 to CPUs with Security Extensions
target-arm: Disable EL3 on unsupported machines
target-arm: Breakout integratorcp and versatilepb cpu init
target-arm: Set CPU has_el3 prop during virt init
target-arm: Enable CPU has_el3 prop during VE init
target-arm: Add arm_boot_info secure_boot control
target-arm: Add ARMCPU secure property
target-arm: Add feature unset function
target-arm: Add virt machine secure property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Conversion to tracepoints (Eric Auger)
- Fix memory listener address space (Frank Blaschka)
- Move to hw/vfio/ and split common vs pci (Eric Auger & Kim Phillips)
- Trivial error_report() fixes (Alex Williamson)
In addition to enabling S390 with the address space fix and updating
to use tracepoints rather than compile time debug, this set of patches
moves hw/misc/vfio.c to hw/vfio/ and paves the way for vfio-platform
support by splitting common functionality from PCI specific code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CRNj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20141222.0' into staging
VFIO updates:
- Conversion to tracepoints (Eric Auger)
- Fix memory listener address space (Frank Blaschka)
- Move to hw/vfio/ and split common vs pci (Eric Auger & Kim Phillips)
- Trivial error_report() fixes (Alex Williamson)
In addition to enabling S390 with the address space fix and updating
to use tracepoints rather than compile time debug, this set of patches
moves hw/misc/vfio.c to hw/vfio/ and paves the way for vfio-platform
support by splitting common functionality from PCI specific code.
# gpg: Signature made Mon 22 Dec 2014 20:19:43 GMT using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg: aka "Alex Williamson <alex@shazbot.org>"
# gpg: aka "Alex Williamson <alwillia@redhat.com>"
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>"
* remotes/awilliam/tags/vfio-update-20141222.0:
vfio: Cleanup error_report()s
hw/vfio: create common module
hw/vfio/pci: use name field in format strings
hw/vfio/pci: rename group_list into vfio_group_list
hw/vfio/pci: split vfio_get_device
hw/vfio/pci: Introduce VFIORegion
hw/vfio/pci: handle reset at VFIODevice
hw/vfio/pci: add type, name and group fields in VFIODevice
hw/vfio/pci: introduce minimalist VFIODevice with fd
hw/vfio/pci: generalize mask/unmask to any IRQ index
hw/vfio/pci: Rename VFIODevice into VFIOPCIDevice
vfio: move hw/misc/vfio.c to hw/vfio/pci.c Move vfio.h into include/hw/vfio
vfio: fix adding memory listener to the right address space
vfio: migration to trace points
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows us to drop the fw_cfg_init() shim and to enforce the possible
mappings at compile time.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU has support for options per machine, keeping
a global list of options is no longer necessary.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418217570-15517-2-git-send-email-marcel.a@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It will be useful for checking when we change traditional
boot order dynamically and propagate error message
to the monitor.
For x86 architecture, we pass &local_err to set_boot_dev()
when vm startup in pc_coms_init().
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This is done in preparation for the addition of VFIO platform
device support.
Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that we finally check for presence of dangling sysbus devices, make check
started complaining that the sPAPR PHB is one such device.
However, it really isn't. The spapr PHB is not really a traditional sysbus
device, but much more a special spapr pv device which is already able to get
created dynamically.
Move spapr to its own dynamic sysbus check handling and allow PHB devices to
get allocated dynamically.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support to expose eTSEC devices in the dynamically created
guest facing device tree. This allows us to expose eTSEC devices into guests
without changes in the machine file.
Because we can now tell the guest about eTSEC devices this patch allows the
user to specify eTSEC devices via -device at all.
Signed-off-by: Alexander Graf <agraf@suse.de>
For e500 our approach to supporting dynamically spawned sysbus devices is to
create a simple bus from the guest's point of view within which we map those
devices dynamically.
We allocate memory regions always within the "platform" hole in address
space and map IRQs to predetermined IRQ lines that are reserved for platform
device usage.
This maps really nicely into device tree logic, so we can just tell the
guest about our virtual simple bus in device tree as well.
Signed-off-by: Alexander Graf <agraf@suse.de>
The g_hash_table_iter_* functions for iterating through a hash table
are not present in glib 2.12, which is our current minimum requirement.
Rewrite the code to use g_hash_table_foreach() instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have a working GPIO controller on the virt machine, we can use
one pin to notify QEMU that the guests wants to power off the system.
Signed-off-by: Alexander Graf <agraf@suse.de>
With the e500 virt machine, we don't have to adhere to the exact hardware
layout of an mpc8544ds board. So there we can just add a qoriq compatible
GPIO controller into the system that we can add a power off hook to.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MemoryRegionOps struct pci4xx_cfgaddr_ops and the read and
write functions it references are all unused; remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
As of qemu-2.1, spapr/pseries, has a set of versioned machine classes to
represent the machine type as it appeared to the guest in different qemu
versions. This allows for safe migration of guests between current and
future qemu versions.
However, these are organized a bit differently from those for PC: on PC,
the default plain "pc" machine type is just an alias for the most recent
versioned machine type. In sPAPR, it names the base machine class from
which the versioned types are derived.
The PC approach is preferable; it makes it clearer which explicit version
is the current one. Additionally updating the "current" machine as the
base class makes it even more likely than otherwise to incorrectly alter
the versioned machines' behaviour when updating the current machine.
Therefore this patch changes sPAPR to the PC approach - the base class
becomes abstract, and plain "pseries" becomes an alias for the most
recent versioned machine class. Since qemu-2.1 is now released, we also
create a new pseries-2.2 machine type, to incorporate changes during this
development cycle (for now it is identical to pseries-2.1).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The virtex-ml507 is a Xilinx CPU based system, and requires several sub
devices which are only included with CONFIG_XILINX. Therefore, it should
only be compiled if CONFIG_XILINX is set.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
A bunch of minor bugfixes all over the place.
changes from v2:
added cpu hotplug rework
added default vga type switch
more fixes
changes from v1:
fix for test re-generation script
add missing acks to two patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUV65JAAoJECgfDbjSjVRpqzgIAJJDaU95xdtl/snSJVbSGsgR
2YW8mC8pjkZnV8fbu7F1vOTJSpAhj0eeXaDTqtbBhgAqBlqQ5tWAT9xDnUIlBlHN
GVTWzWaifVOGMj087Ovvy9+4NyfsuvTlf3aOjvLfqlaDqI5dbZQAyIdHNFyV7Qy9
txgAcERp+caZ4rN8XgAv82KV1JGj8PXermTgLJ+DcqYxhwWm66eEviQ+f+F5YImJ
CJQ6HFPXjclxHCuyKBL334SIwq8IfYyUUkIsGgKCNuHPUud7r2rqsIlRfeZBwLf9
igUgf4iPQL5TNVq9qwQmnTK6ddHTqHZmGyu902WxHK/N0EDq4dLw8diqFhZxo9Y=
=f7Rb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio, misc bugfixes
A bunch of minor bugfixes all over the place.
changes from v2:
added cpu hotplug rework
added default vga type switch
more fixes
changes from v1:
fix for test re-generation script
add missing acks to two patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 03 Nov 2014 16:33:13 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
vga: flip qemu 2.2 pc machine types from cirrus to stdvga
vga: add default display to machine class
vhost-user: fix mmap offset calculation
hw/i386/acpi-build.c: Fix memory leak in acpi_build_tables_cleanup()
smbios: Encode UUID according to SMBIOS specification
pc: Add pc_compat_2_1() function
hw/virtio/vring/event_idx: fix the vring_avail_event error
hw/pci: fixed hotplug crash when using rombar=0 with devices having romfile
hw/pci: fixed error flow in pci_qdev_init
-machine vmport=off: Allow disabling of VMWare ioport emulation
acpi/cpu-hotplug: introduce helper function to keep bit setting in one place
cpu-hotplug: rename function for better readability
qom/cpu: remove the unused CPU hot-plug notifier
pc: Update rtc_cmos in pc_cpu_plug
pc: add cpu hotplug handler to PC_MACHINE
acpi:piix4: convert cpu hotplug to hotplug_handler API
acpi:ich9: convert cpu hotplug to hotplug_handler API
acpi/cpu: add cpu hotplug callback function to match hotplug_handler API
acpi: create separate file for TCPA log
tests: fix rebuild-expected-aml.sh for acpi-test rename
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Such address translation is needed when load address recorded in uImage
is a virtual address. When the actual load address is requested, return
untranslated address: user that needs the translated address can always
apply translation function to it and those that need it untranslated
don't need to do the inverse translation.
Add translation function pointer and its parameter to uimage_load
prototype. Update all existing users.
No user-visible functional changes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Current support for bus master (clearing OK bit) together with the need to
support guests which do not enable PCI bus mastering, leads to extra state in
VIRTIO_PCI_FLAG_BUS_MASTER_BUG bit, which isn't robust in case of cross-version
migration for the case when guests use the device before setting DRIVER_OK.
Rip out this code, and replace it:
- Modern QEMU doesn't need VIRTIO_PCI_FLAG_BUS_MASTER_BUG
so just drop it for latest machine type.
- For compat machine types, set PCI_COMMAND if DRIVER_OK
is set.
As this is needed for 2.1 for both pc and ppc, move PC_COMPAT macros from pc.h
to a new common header.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The patch is big, but all it really does is replacing
dinfo->bdrv
by
blk_bs(blk_by_legacy_dinfo(dinfo))
The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).
Line wrapping muddies the waters a bit. I also omit tests whether
dinfo->bdrv is null, because it never is.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of duplicating the logic for the if_ide
(bus,unit) mappings, rely on the blockdev layer
for managing those mappings for us, and use the
drive_get_by_index call instead.
This allows ide_drive_get to work for AHCI HBAs
as well, and can be used in the Q35 initialization.
Lastly, change the nature of the argument to
ide_drive_get so that represents the number of
total drives we can support, and not the total
number of buses. This will prevent array overflows
if the units-per-default-bus property ever needs
to be adjusted for compatibility reasons.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=GIKW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- Memory: improve error reporting and avoid crashes on hotplug
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.
# gpg: Signature made Thu 11 Sep 2014 11:21:10 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (21 commits)
gdbstub: init mon_chr through qemu_chr_alloc
pckbd: adding new fields to vmstate
mc146818rtc: add missed field to vmstate
piix: do not set irq while loading vmstate
serial: fixing vmstate for save/restore
parallel: adding vmstate for save/restore
fdc: adding vmstate for save/restore
cpu: init vmstate for ticks and clock offset
apic_common: vapic_paddr synchronization fix
vl: use QLIST_FOREACH_SAFE to visit change state handlers
exec: add parameter errp to gethugepagesize
exec: report error when memory < hpagesize
hostmem-ram: don't exit qemu if size of memory-backend-ram is way too big
memory: add parameter errp to memory_region_init_rom_device
memory: add parameter errp to memory_region_init_ram
exec: add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr
rules.mak: Fix DSO build by pulling in archive symbols
util: Don't link host-utils.o if it's empty
util: Move general qemu_getauxval to util/getauxval.c
trace: Only link generated-tracers.o with "simple" backend
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexander Graf (11):
PPC: KVM: Fix g3beige and mac99 when HV is loaded
PPC: mac99: Move NVRAM to page boundary when necessary
KVM: Add helper to run KVM_CHECK_EXTENSION on vm fd
PPC: KVM: Use vm check_extension for pv hcall
PPC: mac99: Fix core99 timer frequency
PPC: mac_nvram: Remove unused functions
PPC: mac_nvram: Allow 2 and 4 byte accesses
PPC: mac_nvram: Split NVRAM into OF and OSX parts
PPC: Mac: Move tbfreq into local variable
PPC: Cuda: Use cuda timer to expose tbfreq to guest
PPC: Fix default config ordering and add eTSEC for ppc64
Alexey Kardashevskiy (7):
spapr: Move DT memory node rendering to a helper
spapr: Use DT memory node rendering helper for other nodes
spapr: Refactor spapr_populate_memory() to allow memoryless nodes
spapr: Split memory nodes to power-of-two blocks
spapr: Add a helper for node0_size calculation
spapr: Fix ibm, associativity for memory nodes
spapr_pci: Fix config space corruption
Anton Blanchard (2):
spapr-vlan: Don't touch last entry in buffer list
hypervisor property clashes with hypervisor node
Benjamin Herrenschmidt (2):
loader: Add load_image_size() to replace load_image()
spapr: Locate RTAS and device-tree based on real RMA
Bharat Bhushan (4):
ppc: debug stub: Get trap instruction opcode from KVM
ppc: synchronize excp_vectors for injecting exception
ppc: Add software breakpoint support
ppc: Add hw breakpoint watchpoint support
Gonglei (1):
spapr: fix possible memory leak
Greg Kurz (1):
spapr_pci: map the MSI window in each PHB
Nikunj A Dadhania (3):
ppc: spapr-rtas - implement os-term rtas call
spapr: add uuid/host details to device tree
ppc/spapr: Fix MAX_CPUS to 255
Peter Maydell (1):
hw/ppc/spapr_hcall.c: Fix typo in function names
Tom Musta (20):
linux-user: Fix Stack Pointer Bug in PPC setup_rt_frame
linux-user: Split PPC Trampoline Encoding from Register Save
linux-user: Enable Signal Handlers on PPC64
linux-user: Properly Dereference PPC64 ELFv1 Signal Handler Pointer
linux-user: Implement do_setcontext for PPC64
linux-user: Handle PPC64 ELFv2 Function Pointers
target-ppc: Bug Fix: rlwinm
target-ppc: Bug Fix: rlwnm
target-ppc: Bug Fix: rlwimi
target-ppc: Bug Fix: mullwo
target-ppc: Bug Fix: mullw
target-ppc: Bug Fix: mulldo OV Detection
target-ppc: Bug Fix: srawi
target-ppc: Bug Fix: srad
target-ppc: Special Case of rlwimi Should Use Deposit
target-ppc: Optimize rlwinm MB=0 ME=31
target-ppc: Optimize rlwnm MB=0 ME=31
target-ppc: Clean Up mullw
target-ppc: Clean up mullwo
target-ppc: Implement mulldo with TCG
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=lpcC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2014-09-08
Alexander Graf (11):
PPC: KVM: Fix g3beige and mac99 when HV is loaded
PPC: mac99: Move NVRAM to page boundary when necessary
KVM: Add helper to run KVM_CHECK_EXTENSION on vm fd
PPC: KVM: Use vm check_extension for pv hcall
PPC: mac99: Fix core99 timer frequency
PPC: mac_nvram: Remove unused functions
PPC: mac_nvram: Allow 2 and 4 byte accesses
PPC: mac_nvram: Split NVRAM into OF and OSX parts
PPC: Mac: Move tbfreq into local variable
PPC: Cuda: Use cuda timer to expose tbfreq to guest
PPC: Fix default config ordering and add eTSEC for ppc64
Alexey Kardashevskiy (7):
spapr: Move DT memory node rendering to a helper
spapr: Use DT memory node rendering helper for other nodes
spapr: Refactor spapr_populate_memory() to allow memoryless nodes
spapr: Split memory nodes to power-of-two blocks
spapr: Add a helper for node0_size calculation
spapr: Fix ibm, associativity for memory nodes
spapr_pci: Fix config space corruption
Anton Blanchard (2):
spapr-vlan: Don't touch last entry in buffer list
hypervisor property clashes with hypervisor node
Benjamin Herrenschmidt (2):
loader: Add load_image_size() to replace load_image()
spapr: Locate RTAS and device-tree based on real RMA
Bharat Bhushan (4):
ppc: debug stub: Get trap instruction opcode from KVM
ppc: synchronize excp_vectors for injecting exception
ppc: Add software breakpoint support
ppc: Add hw breakpoint watchpoint support
Gonglei (1):
spapr: fix possible memory leak
Greg Kurz (1):
spapr_pci: map the MSI window in each PHB
Nikunj A Dadhania (3):
ppc: spapr-rtas - implement os-term rtas call
spapr: add uuid/host details to device tree
ppc/spapr: Fix MAX_CPUS to 255
Peter Maydell (1):
hw/ppc/spapr_hcall.c: Fix typo in function names
Tom Musta (20):
linux-user: Fix Stack Pointer Bug in PPC setup_rt_frame
linux-user: Split PPC Trampoline Encoding from Register Save
linux-user: Enable Signal Handlers on PPC64
linux-user: Properly Dereference PPC64 ELFv1 Signal Handler Pointer
linux-user: Implement do_setcontext for PPC64
linux-user: Handle PPC64 ELFv2 Function Pointers
target-ppc: Bug Fix: rlwinm
target-ppc: Bug Fix: rlwnm
target-ppc: Bug Fix: rlwimi
target-ppc: Bug Fix: mullwo
target-ppc: Bug Fix: mullw
target-ppc: Bug Fix: mulldo OV Detection
target-ppc: Bug Fix: srawi
target-ppc: Bug Fix: srad
target-ppc: Special Case of rlwimi Should Use Deposit
target-ppc: Optimize rlwinm MB=0 ME=31
target-ppc: Optimize rlwnm MB=0 ME=31
target-ppc: Clean Up mullw
target-ppc: Clean up mullwo
target-ppc: Implement mulldo with TCG
# gpg: Signature made Mon 08 Sep 2014 11:51:15 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
* remotes/agraf/tags/signed-ppc-for-upstream: (52 commits)
hypervisor property clashes with hypervisor node
PPC: Fix default config ordering and add eTSEC for ppc64
spapr_pci: map the MSI window in each PHB
target-ppc: Implement mulldo with TCG
target-ppc: Clean up mullwo
target-ppc: Clean Up mullw
target-ppc: Optimize rlwnm MB=0 ME=31
target-ppc: Optimize rlwinm MB=0 ME=31
target-ppc: Special Case of rlwimi Should Use Deposit
spapr-vlan: Don't touch last entry in buffer list
spapr_pci: Fix config space corruption
PPC: Cuda: Use cuda timer to expose tbfreq to guest
PPC: Mac: Move tbfreq into local variable
PPC: mac_nvram: Split NVRAM into OF and OSX parts
PPC: mac_nvram: Allow 2 and 4 byte accesses
PPC: mac_nvram: Remove unused functions
PPC: mac99: Fix core99 timer frequency
PPC: KVM: Use vm check_extension for pv hcall
KVM: Add helper to run KVM_CHECK_EXTENSION on vm fd
target-ppc: Bug Fix: srad
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
dtc fails on a recent QEMU snapshot:
ERROR (name_properties): "name" property in /hypervisor#1 is incorrect ("hypervisor" instead of base node name)
Looking at the device tree we have a hypervisor property:
# lsprop hypervisor
hypervisor "kvm"
But we also have a hypervisor node, with a name that doesn't match:
# lsprop hypervisor#1/
name "hypervisor"
compatible "linux,kvm"
linux,phandle 7e5eb5d8 (2120136152)
Commit c08ce91d309c (spapr: add uuid/host details to device tree)
looks to have collided with an earlier patch. Remove the hypervisor
property.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
On sPAPR, virtio devices are connected to the PCI bus and use MSI-X.
Commit cc943c36fa has modified MSI-X
so that writes are made using the bus master address space and follow
the IOMMU path.
Unfortunately, the IOMMU address space address space does not have an
MSI window: the notification is silently dropped in unassigned_mem_write
instead of reaching the guest... The most visible effect is that all
virtio devices are non-functional on sPAPR since then. :(
This patch does the following:
1) map the MSI window into the IOMMU address space for each PHB
- since each PHB instantiates its own IOMMU address space, we
can safely map the window at a fixed address (SPAPR_PCI_MSI_WINDOW)
- no real need to keep the MSI window setup in a separate function,
the spapr_pci_msi_init() code moves to spapr_phb_realize().
2) kill the global MSI window as it is not needed in the end
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
When disabling MSI/MSIX via "ibm,change-msi" RTAS call, no check was made
if MSI or MSIX is actually supported and the MSI message was reset
unconditionally. If this happened on a device which does not support MSI
(but does support MSIX, otherwise "ibm,change-msi" would not be called),
this device would have PCIDevice::msi_cap field (MSI capability offset)
set to zero and writing a vector would actually clear PCI status.
This clears MSI message only if MSI or MSIX is present on a device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Mac OS X calibrates a number of frequencies on bootup based on reading
tb values on bootup and comparing them to via cuda timer values.
The only variable we can really steer well (thanks to KVM) is the cuda
frequency. So let's use that one to fake Mac OS X into believing the
bus frequency is tbfreq * 4. That way Mac OS X will automatically
calculate the correct timebase frequency.
With this patch and the patch set I posted earlier I can successfully
run Mac OS X 10.2, 10.3 and 10.4 guests with -M mac99 on TCG and KVM.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
We already expose the real CPU's tb frequency to the guest via fw_cfg. Soon
we will need to also expose it to the MacIO, so let's move it to a variable
that we can leverage every time we need the frequency.
Signed-off-by: Alexander Graf <agraf@suse.de>
MAX_CPUS 256 is inconsistent with qemu supporting upto 255 cpus. This
MAX_CPUS number was percolated back to "virsh capabilities" with wrong
max_cpus.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We currently calculate the final RTAS and FDT location based on
the early estimate of the RMA size, cropped to 256M on KVM since
we only know the real RMA size at reset time which happens much
later in the boot process.
This means the FDT and RTAS end up right below 256M while they
could be much higher, using precious RMA space and limiting
what the OS bootloader can put there which has proved to be
a problem with some OSes (such as when using very large initrd's)
Fortunately, we do the actual copy of the device-tree into guest
memory much later, during reset, late enough to be able to do it
using the final RMA value, we just need to move the calculation
to the right place.
However, RTAS is still loaded too early, so we change the code to
load the tiny blob into qemu memory early on, and then copy it into
guest memory at reset time. It's small enough that the memory usage
doesn't matter.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: fixed errors from checkpatch.pl, defined RTAS_MAX_ADDR]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix compilation on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
We want the associtivity lists of memory and CPU nodes to match but
memory nodes have incorrect domain#3 which is zero for CPU so they won't
match.
This clears domain#3 in the list to match CPUs associtivity lists.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
In multiple places there is a node0_size variable calculation
which assumes that NUMA node #0 and memory node #0 are the same
things which they are not. Since we are going to change it and
do not want to change it in multiple places, let's make a helper.
This adds a spapr_node0_size() helper and makes use of it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Linux kernel expects nodes to have power-of-two size and
does WARN_ON if this is not the case:
[ 0.041456] WARNING: at drivers/base/memory.c:115
which is:
===
/* Validate blk_sz is a power of 2 and not less than section size */
if ((block_sz & (block_sz - 1)) || (block_sz < MIN_MEMORY_BLOCK_SIZE)) {
WARN_ON(1);
block_sz = MIN_MEMORY_BLOCK_SIZE;
}
===
This splits memory nodes into set of smaller blocks with
a size which is a power of two. This makes sure the start
address of every node is aligned to the node size.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: squash windows compile fix in]
Signed-off-by: Alexander Graf <agraf@suse.de>
Current QEMU does not support memoryless NUMA nodes, however
actual hardware may have them so it makes sense to have a way
to emulate them in QEMU. This prepares SPAPR for that.
This moves 2 calls of spapr_populate_memory_node() into
the existing loop over numa nodes so first several nodes may
have no memory and this still will work.
If there is no numa configuration, the code assumes there is just
a single node at 0 and it has all the guest memory.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This finishes refactoring by using the spapr_populate_memory_node helper
for all nodes and removing leftovers from spapr_populate_memory().
This is not a part of the previous patch because the patches look
nicer apart.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This moves recurring bits of code related to memory@xxx nodes
creation to a helper.
This makes use of the new helper for node@0.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson