Put "success" parent reporting in os_setup_post() to after
all other initializers which may also fail, to the very end,
so more possible failure cases are reported properly to the
calling process.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
In case of -daemonize, we write non-zero to the daemon
pipe only if pidfile creation failed, so the parent will
report error about pidfile problem. There's no need to
make special case for this, since all other errors are
reported by the child just fine. Let the parent report
error and simplify logic in os_daemonize().
This way, we don't need os_pidfile_error() function, since
it only prints error now, so put the error reporting printf
into the only place where qemu_create_pidfile() is called,
in vl.c.
While at it, fix wrong indentation in os_daemonize().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Eliminiate two fullwrite implementations with goto replacing them with
a proper do..while loop.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
When asked to -daemonize, we fork a child and setup a pipe between
it and parent to pass exit status. os-posix.c used global fds[2]
array for that, but actually only the writing side of the pipe is
needed to be global, and this name is really too generic. Use
just one interger for the writing side of the pipe, and name it
daemon_pipe to be more understandable than cryptic fds[1].
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
This reverts commit e5048d15ce.
qemu_create_pidfile() is only created from main(), and there,
if that function returns failure, os_pidfile_error() function
is called, to, guess that, report error (which is done differently
whenever we're daemonizing or not).
qemu_create_pidfile() function has several error returns, this
lockf() failure is one of them, there are others (another shown
in the patch context too).
So this patch makes whole thing inconsistent at least.
If we need to show error message when we're daemonizing, it
looks like we should modify os_pidfile_error() routine to always
report error and only after that check for daemon mode. This way
all errors will be reported the same way.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It will cause that create vm failed When manager
tool is killed forcibly (kill -9 libvirtd_pid),
the file not was unlink, and unlock. It's better
that report the error message for users.
Signed-off-by: Huangweidong <weidong.huang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If we get inside the 'else if (status == 1)' conditional,
then we know that read() succeeded, and therefore errno is
unspecified. Printing strerror(errno) on a random value
is not helpful.
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 10f5bff622 (util: Split out
exec_dir from os_find_datadir) moved code from os-posix.c to
util/oslib-posix.c but forgot to move a FreeBSD #include alongside,
needed for CTL_KERN among others.
Cc: Fam Zheng <famz@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Message-id: 1394717279-23406-1-git-send-email-andreas.faerber@web.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this change, main() calls qemu_init_exec_dir and uses argv[0] to
init exec_dir. The saved value can be retrieved with
qemu_get_exec_dir later. It will be reused by module loading.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In certain scenario, latency induced by paging is significant and
memory locking is needed. Also, in the scenario with untrusted
guests, latency improvement due to mlock is desired.
This patch introduces a following new option to mlock guest and
qemu memory:
-realtime mlock=on|off
Signed-off-by: Satoru Moriya <satoru.moriya@hds.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366382526-26146-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'trivial-patches' of git://github.com/stefanha/qemu:
versatilepb: Use symbolic indices for ARM PIC
qdev: kill bogus comment
qemu-barrier: Fix compiler version check for future gcc versions
hw: Add missing 'static' attribute for QEMUMachine
cleanup useless return sentence
qemu-sockets: Fix compiler warning (regression for MinGW)
vnc: Fix spelling (hellmen -> hellman) in comment
slirp: Fix spelling in comment (enought -> enough, insure -> ensure)
tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code
cpu: Add missing 'static' attribute to qemu_global_mutex
configure: Support empty target list (--target-list=)
hw: Fix return value check for bdrv_read, bdrv_write
This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
os_set_proc_name: Use pstrcpy, in place of strncpy and the
ineffectual preceding assignment: name[sizeof(name) - 1] = 0;
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Current qemu initializes curses even if -daemonize option is
passed. This cause problem because shell prompt appears without
calling endwin().
This patch adds new function, is_daemonized(), to OS dependent
code. With this function, curses_display_init() can check that qemu is
daemonized or not. If daemonized, curses_display_init() isn't called
and the problem is avoided.
Of course, -daemonize && -curses doesn't make sense. Users shouldn't
pass the arguments at the same time. But the problem is very painful
because Ctrl-C cannot be delivered to the terminal.
Cc: Andrzej Zaborowski <balrog@zabor.org>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Hitoshi Mitake <h.mitake@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Commit 0f66998 makes -enable-fips conditional on Linux hosts but then uses it
unconditionally in vl.c.
Fix this by moving the fips handling to os-posix.c and adding a condition.
Cc: Paul Moore <pmoore@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add an include for a header required to build on recent FreeBSD.
Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Signed-off-by: Andreas Frber <andreas.faerber@web.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The lockf() call in qemu_create_pidfile() aims at ensuring mutual
exclusion. We shouldn't close the pidfile on success (as introduced by
commit 1bbd1592), because that drops the lock as well [1]:
"File locks shall be released on first close by the locking process
of any file descriptor for the file."
Coverity may complain again about the leaked file descriptor; let's
worry about that later.
v1->v2:
- add reference to 1bbd1592
- explain the intentional fd leak in the source
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/lockf.html
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Using the main loop code from QEMU enables tools to operate fully
asynchronously. Advantages include better Windows portability (for some
definition of portability) over glib's.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Andrew Griffiths reports that -runas does not set supplementary group
IDs. This means that gid 0 (root) is not dropped when switching to an
unprivileged user.
Add an initgroups(3) call to use the -runas user's /etc/groups
membership to update the supplementary group IDs.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
BeOS and Haiku on i386 use long for 32-bit types, including pid_t.
Using %d with pid_t therefore results in a warning.
Unfortunately POSIX:2008 does not define a PRId* string for pid_t.
In some places pid_t was previously casted to long and %ld hardcoded.
The predecessor of this patch added another upcast for the simpletrace
filename but was not applied to date.
Since new uses of pid_t with %d keep creeping in, let's instead define
an OS-dependent format string and use that consistently.
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Ingo Weinhold <ingo_weinhold@gmx.de>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
SLIRP -smb support wants to fork a process and forget about reaping it.
To please it, add a generic service to register a process id and let
QEMU reap it. In the future it could be enhanced to pass a status,
but this would be unused.
With this in place, the SIGCHLD signal handler would not stomp on pclose
anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently when rogue script kills QEMU process (using TERM/INT/HUP
signal) it looks indistinguishable from system shutdown. Lets report
that QEMU was killed and leave some clues about the killer identity.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Based on patch by Glauber Costa:
To allow management applications like libvirt to apply CPU affinities to
the VCPU threads, expose their ID via info cpus. This patch provides the
pre-existing and used interface from qemu-kvm.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Replace array size calculations with ARRAY_SIZE macro.
Implemented with this Coccinelle semantic patch, adapted from
Linux kernel:
@@
type T;
T[] E;
@@
- (sizeof(E)/sizeof(*E))
+ ARRAY_SIZE(E)
@@
type T;
T[] E;
@@
- (sizeof(E)/sizeof(E[...]))
+ ARRAY_SIZE(E)
@@
type T;
T[] E;
@@
- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
Some files (*-dis.c, tests/*) had to be filtered out.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The result of parsing qemu-options.def depends on whehter or not
MAP_POPULATE is defined, so make sure to include sys/mman.h before
including qemu-options.h.
Reported by Frank Arnold.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move handling to change process name to POSIX specific files
plus add a better error message to cover the case where the
feature isn't supported.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move line-buffering setup to OS specific files.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
os_change_process_uid() and os_change_root() are now only called
from os-posix.c, so no need to keep win32 stubs for them.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move daemonize handling from vl.c to OS specific files. Provide dummy
stubs for Win32.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move chroot handling to OS specific files.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move code to handle runas, ie. change of user id of QEMU process
to OS specific files and provide dummy stub for Win32.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce OS specific cmdline argument handling by calling
os_parse_cmd_args() at the end of switch() statement. Move option
enum to qemu-options.h and have it included from os-posix.c and
os-win32.c in addition to vl.c.
In addition move SMB argument to os-posix.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This moves the win32 and POSIX versions of find_datadir() to OS
specific files, and removes some #ifdef clutter from vl.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move main signal handler setup to os specific files.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rename os_setup_signal_handling() to os_setup_early_signal_handling()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introcuce os-posix.c and move posix specific signal handling
there.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Michael Tokarev