Many of the Neon "2 register misc" instruction forms require invalid
size fields to cause the instruction to UNDEF. Pull this information
out into an array; this simplifies the code and also means we can do
the check early and avoid the problem of leaking TCG temporaries in
the illegal_op case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add missing checks for cases which must UNDEF in the Neon "2 registers and
a scalar" data processing instruction space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add missing UNDEF checks for instructions in the Neon "3 registers of
different widths" data processing space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For Neon "one register and a modified immediate value" forms, the
combination op=1 cmode=1111 is unallocated and should UNDEF.
All instructions of this form also UNDEF if Q == 1 and Vd<0> == 1.
We also add a comment on the only UNPREDICTABLE in this space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Collapse some switch cases for VSRI into those for VSHL, VSLI,
since the bodies are the same. (This is not completely obvious
for the size < 3 case, but since for VSRI we know U=1 the
GEN_NEON_INTEGER_OP() expansion is equivalent to the open-coded
VSHL/VSLI case.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correctly handle all the UNDEF cases for Neon instructions of the
"2 registers and shift" form, and make sure that we check for these
cases early enough not to leak TCG temporaries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since we know that the case of (pairwise && q) has been caught
earlier, we can simplify the register setup code for each pass
in the three-register-same-size Neon loop.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct the handling of UNDEF cases for the NEON "3 registers same
size" forms, by adding missing checks and rationalising some others
so they are done early enough to avoid leaking TCG temporaries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Simplify the checks for invalid size values for the Neon "three registers
of the same size" instruction forms (and add them where they were missing)
by using a lookup table.
This includes adding symbolic constants for the op values in this space,
since we now use them in multiple places.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Using cpu_physical_memory_read, cpu_physical_memory_write and ldub_phys
improves readability and allows removing some type casts.
lduw_phys and ldl_phys were not used because both require aligned
addresses. Therefore it is not possible to simply replace existing
calls by one of these functions.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
All other type casts in calls of cpu_physical_memory_read are
used by hardware emulations and will be fixed by separate patches.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
All other type casts in calls of cpu_physical_memory_write are
used by hardware emulations and will be fixed by separate patches.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
A lot of calls don't operate on bytes but on words or on structured data.
So instead of a pointer to uint8_t, a void pointer is the better choice.
This allows removing many type casts.
(Some very early implementations of memcpy used char pointers
which were replaced by void pointers for the same reason).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is a bug in nvidia's binary GPU driver, which causes a segmentation
fault if linked to libGL.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that PPC defaults to softfloat which always provides float128
support, there is no need to keep two version of the code, depending if
float128 support is available or not. Suggested by Peter Maydell.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
SH4 is always using softfloat, so it's possible to have helpers directly
taking float32 or float64 value. This allow to get rid of conversions
through CPU_{Float,Double}U.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove a write-only variable, spotted by GCC 4.6.0:
/src/qemu/hw/ppc.c: In function 'power7_set_irq':
/src/qemu/hw/ppc.c:255:9: error: variable 'cur_level' set but not used [-Werror=unused-but-set-variable]
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The feature bitmap in the s390 virtio machine is little endian. To
address for that, we need to bswap the values after reading them out.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The alignment for longs on s390x is 8. That's the only place where it differs
from the default alignments found in configure already. The example alignment
program from Laurent printed the following on a real s390x:
alignof(short) 2
alignof(int) 4
alignof(long) 8
alignof(long long) 8
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The proper way to signal that a sysbus devices need no MMIO region is to
pass -1 to sysbus_create_simple.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
factor out ACPI GPE logic. Later it will be used by ICH9 ACPI.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Currently target-arm/ assumes at least ARMv5 core. Add support for
handling also ARMv4/ARMv4T. This changes the following instructions:
BX(v4T and later)
BKPT, BLX, CDP2, CLZ, LDC2, LDRD, MCRR, MCRR2, MRRC, MCRR, MRC2, MRRC,
MRRC2, PLD QADD, QDADD, QDSUB, QSUB, STRD, SMLAxy, SMLALxy, SMLAWxy,
SMULxy, SMULWxy, STC2 (v5 and later)
All instructions that are "v5TE and later" are also bound to just v5, as
that's how it was before.
This patch doesn _not_ include disabling of cp15 access and base-updated
data abort model (that will be required to emulate chips based on a
ARM7TDMI), because:
* no ARM7TDMI chips are currently emulated (or planned)
* those features aren't strictly necessary for my purposes (SA-1 core
emulation).
All v5 models are handled as they are v5T. Internally we still have a
check if the model is a v5(T) or v5TE, but as all emulated cores are
v5TE, those two cases are simply aliased (for now).
Patch is heavily based on patch by Filip Navara <filip.navara@gmail.com>
which in turn is based on work by Ulrich Hecht <uli@suse.de> and Vincent
Sanders <vince@kyllikki.org>.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
tcg_gen_exit_tb takes a parameter of type tcg_target_long,
so the type casts of pointer to long should be replaced by
type casts of pointer to tcg_target_long (suggested by Blue Swirl).
These changes are needed for build environments where
sizeof(long) != sizeof(void *), especially for w64.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
fix 2Gb integer overflow in in VNC tight and zlib encodings
As found by Roland Dreier <roland@purestorage.com> (excellent
catch!), when amount of VNC compressed data produced by zlib
and sent to client exceeds 2Gb, integer overflow occurs because
currently, we calculate amount of data produced at each step by
comparing saved total_out with new total_out, and total_out is
something which grows without bounds. Compare it with previous
avail_out instead of total_out, and leave total_out alone.
The same code is used in vnc-enc-tight.c and vnc-enc-zlib.c,
so fix both cases.
There, there's no actual need to save previous_out value, since
capacity-offset (which is how that value is calculated) stays
the same so it can be recalculated again after call to deflate(),
but whole thing becomes less readable this way.
Reported-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On Mon, 4 Apr 2011 20:15:30 +0200, Aurelien Jarno <aurelien@aurel32.net> wrote:
> Is it really safe ignoring write to this register? If yes, it's probably
> a good idea to explain why in a comment. In any case, if supporting this
> register is easy to do, it would be the best option.
I think it is safe. Please see an updated comment below.
And though implementing this register might be possible, I suppose it
is not worth to supporting FrameTooLong detection, for now at least.
Thank you for comments.
>8---------------------------------------------------------------------
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Tue, 5 Apr 2011 23:12:07 +0900
Subject: [PATCH] lan9118: Ignore write to MAC_VLAN1 register
Since linux 2.6.38, smsc911x driver writes to VLAN1 registger.
Since this register only affects FrameTooLong detection, ignoring
write to this register should be safe.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
factor out ACPI PM1_CNT logic. This will be used by ich9 acpi.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Huacai Chen <zltjiangshi@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
factor out ACPI PM1a EVT logic.
Later this will be used by ich9 acpi.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Huacai Chen <zltjiangshi@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
factor out PM_TMR logic. Later This will be used by ich9 acpi.
Also fixes the same bug in vt82c686.c that was fixed by the following
commits.
> commit 055479feab
> Author: aliguori <aliguori@c046a42c-6fe2-441c-8c8c-71466251a162>
> Date: Wed Jan 21 16:31:20 2009 +0000
>
> Always return latest pmsts instead of the old one (Xiantao Zhang)
>
> It may lead to the issue when booting windows guests with acpi=1
> if return the old pmsts.
>
> Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Huacai Chen <zltjiangshi@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When checking pfl->rom_mode for when to lazily reenter ROMD mode,
the value was check was the opposite of what it should have been.
This prevent the part from returning to ROMD mode after a write
was made to the CFI rom region.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
basename prints a missing-argument error when sdlconfig is empty
and we're cross-compiling.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Quote filename in error message to spot possible whitespace character in
the filename and make error message more meaningful.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When configured with --enable-debug, we compile without optimization.
This means that the function mpc8544_copy_soc_cell() in ppce500_mpc8544ds.c
is not optimized out, even though it is never called without kvm. That in
turn causes a link failure, because it calls the function
kvmppc_read_host_property() which is in kvm_ppc.o and therefore not
included in a --disable-kvm build.
This patch fixes the problem by providing a dummy stub for
kvmppc_read_host_property() in kvm_ppc.h when !CONFIG_KVM.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The recent patches adding partial support for POWER7 cpu emulation included
implementing the popcntd instruction. The support for this was open coded,
but host-utils.h already included a function implementing an equivalent
population count function, which uses a gcc builtin (which can use special
host instructions) if available.
This patch makes the popcntd implementation use the existing, potentially
faster, implementation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
At present, the 'pseries' machine creates a flattened device tree in the
machine->init function to pass to either the guest kernel or to firmware.
However, the machine->init function runs before processing of -device
command line options, which means that the device tree so created will
be (incorrectly) missing devices specified that way.
Supplying a correct device tree is, in any case, part of the required
platform entry conditions. Therefore, this patch moves the creation and
loading of the device tree from machine->init to a reset callback. The
setup of entry point address and initial register state moves with it,
which leads to a slight cleanup.
This is not, alas, quite enough to make a fully working reset for pseries.
For that we would need to reload the firmware images, which on this
machine are loaded into RAM. It's a step in the right direction, though.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the pseries machine init code builds up an array, envs, of
CPUState pointers for all the cpus in the system. This is kind of
pointless, given the generic code already has a perfectly good linked list
of the cpus.
In addition, there are a number of places which assume that the cpu's
cpu_index field is equal to its index in this array. This is true in
practice, because cpu_index values are just assigned sequentially, but
it's conceptually incorrect and may not always be true.
Therefore, this patch abolishes the envs array, and explicitly uses the
generic cpu linked list and cpu_index values throughout.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
cppcheck reports this error:
hw/spapr_vscsi.c:274: error: Uninitialized variable: rc
If llen == 0, rc was indeed used without being initialized.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Peter Maydell