We are already including -D__STDC_LIMIT_MACROS in the global CXXFLAGS,
so it makes sense to do the same for -D__STDC_CONSTANT_MACROS and
-D__STDC_FORMAT_MACROS instead of limiting that to libvixl.
The -Wno-sign-compare option can also be removed since GCC 4.6 is not
supported anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ISA 3.0B added a set of Floating-Point Status and Control Register (FPSCR)
instructions: mffsce, mffscdrn, mffscdrni, mffscrn, mffscrni, mffsl.
This patch adds support for 'mffsl'.
'mffsl' is identical to 'mffs', except it only returns mode, status, and enable
bits from the FPSCR.
On CPUs without support for 'mffsl' (below ISA 3.0), the 'mffsl' instruction
will execute identically to 'mffs'.
Note: I renamed FPSCR_RN to FPSCR_RN0 so I could create an FPSCR_RN mask which
is both bits of the FPSCR rounding mode, as defined in the ISA.
I also fixed a typo in the definition of FPSCR_FR.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
v4:
- nit: added some braces to resolve a checkpatch complaint.
v3:
- Changed tcg_gen_and_i64 to tcg_gen_andi_i64, eliminating the need for a
temporary, per review from Richard Henderson.
v2:
- I found that I copied too much of the 'mffs' implementation.
The 'Rc' condition code bits are not needed for 'mffsl'. Removed.
- I now free the (renamed) 'tmask' temporary.
- I now bail early for older ISA to the original 'mffs' implementation.
Message-Id: <1565982203-11048-1-git-send-email-pc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The constraint for `rdinstreth` was comparing the csr number to 0xc80,
which is `cycleh` instead. Fix this.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Due to the design of the disassembler, the immediate is not
known during decoding of the opcode; so to handle compressed
encodings with reserved immediate values (non-zero), we need
to add an additional check during decompression to match
reserved encodings with zero immediates and translate them
into the illegal instruction.
The following compressed opcodes have reserved encodings with
zero immediates: c.addi4spn, c.addi, c.lui, c.addi16sp, c.srli,
c.srai, c.andi and c.slli
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Palmer: Broke long lines]
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]
Commit dc99065b5f (v0.1.0) added dis-asm.h from binutils.
Commit 43d4145a98 (v0.1.5) inlined bfd.h into dis-asm.h to remove the
dependency on binutils.
Commit 76cad71136 (v1.4.0) moved dis-asm.h to include/disas/bfd.h.
The new name is confusing when you try to match against (pre GPLv3+)
binutils. Rename it back. Keep it in the same directory, of course.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Remove machine generated constraints that are not
referenced by the pseudo-instruction constraints.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add graphical description of nanoMIPS instruction pool organization.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-3-git-send-email-aleksandar.markovic@rt-rk.com>
Correct comments to handlers of some DSP instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-2-git-send-email-aleksandar.markovic@rt-rk.com>
Rename function extract_ac_13_12() to extract_ac_15_14().
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-3-git-send-email-aleksandar.markovic@rt-rk.com>
Amend some DSP instructions related comments.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
There are not many, and they are all simple mistakes that ended up
being committed. Remove them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-2-pbonzini@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add "nanoMIPS32 Instruction Set Technical Reference Manual" as
a reference.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reorder declarations and definitions of gpr decoders by number of
input bits of corresponding encoding type.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Comment the decoder of 'gpr1' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename the decoder of 'gpr1' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Comment the decoder of 'gpr2.reg2' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename the decoder of 'gpr2.reg2' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Comment the decoder of 'gpr2.reg1' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename the decoder of 'gpr2.reg1' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Comment the decoder of 'gpr4.zero' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename the decoder of 'gpr4.zero' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Comment the decoder of 'gpr4' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename the decoder of 'gpr4' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Comment the decoder of 'gpr3.src.store' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename the decoder of 'gpr3.src.store' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Comment the decoder of 'gpr3' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename the decoder of 'gpr3' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fix order of extraction function invocations so that extraction
goes from MSB side to LSB side of the given instruction coding
content. This is desireable because of consistency and easier
visual spotting of errors.
After this patch, all such invocations should be in the desired
order.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename more functions that have names that are hard to understand.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename NMD::extract_ft_20_19_18_17_16(uint64 instruction) to
NMD::extract_ft_25_24_23_22_21(uint64 instruction).
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename NMD::extract_fs_15_14_13_12_11(uint64 instruction) to
NMD::extract_fs_20_19_18_17_16(uint64 instruction).
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename NMD::extract_fd_10_9_8_7_6(uint64 instruction) to
NMD::extract_fd_15_14_13_12_11(uint64 instruction).
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename some functions that have names that are hard to understand.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fix order of extraction function invocations so that extraction
goes from MSB side to LSB side of the given instruction coding
content. This is desireable because of consistency and easier
visual spotting of errors.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fix wrong function name. The convention in these files is that names of
extraction functions should reflect bit patterns they are extracting.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Some functions were not used at all. Compiler doesn't complain
since they are class memebers. Remove them - no future usage is
planned.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fix several mistakes in preambles of nanomips disassembler source
files.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Use POSIX types and format strings.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
This causes a build error with debian sid, riscv64 host:
disas/microblaze.c:179: error: "REG_SP" redefined [-Werror]
#define REG_SP 1 /* stack pointer */
In file included from /usr/include/signal.h:306,
from include/qemu/osdep.h:101,
from disas/microblaze.c:36:
/usr/include/riscv64-linux-gnu/sys/ucontext.h:36: note: this is the location of the previous definition
# define REG_SP 2
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the addex instruction introduced in ISA V3.00 in qemu tcg.
The add extended using alternate carry bit (addex) instruction performs
the same operation as the add extended (adde) instruction, but using the
overflow (ov) field in the fixed point exception register (xer) as the
carry in and out instead of the carry (ca) field.
The instruction has a Z23-form, not an XO form, as follows:
------------------------------------------------------------------
| 31 | RT | RA | RB | CY | 170 | 0 |
------------------------------------------------------------------
0 6 11 16 21 23 31 32
However since the only valid form of the instruction defined so far is
CY = 0, we can treat this like an XO form instruction.
There is no dot form (addex.) of the instruction and the summary overflow
(so) bit in the xer is not modified by this instruction.
For simplicity we reuse the gen_op_arith_add function and add a function
argument to specify where the carry in input should come from and the
carry out output be stored (note must be the same location).
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add disassembler support for nanoMIPS.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Matthew Fortune <matthew.fortune@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Many of these are marked as "intentional/fix required" because they
just need adding a fall through comment. This is exactly what this
patch does, except for target/mips/translate.c where it is easier to
duplicate the code, and hw/audio/sb16.c where I consulted the DOSBox
sources and decide to just remove the LOG_UNIMP before the fallthrough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"move16 %a0@+,%a1@" and "fmovel (cpid=3) %a0@-,%fpcr"
share the same opcode.
To fix that, backport the fix from binutils:
2005-11-10 Andreas Schwab <schwab@suse.de>
* m68k-dis.c (print_insn_m68k): Only match FPU insns with
coprocessor ID 1.
Reported-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20180625203559.21370-2-laurent@vivier.eu>
This fixes an issue when disassembling rv128 c.sqsp,
where the code erroneously fell through to c.swsp.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This was added to help debug issues using -d in_asm. It is
useful to see the instruction bytes, as one can detect if
one is trying to execute ASCII or device-tree magic.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
This fixes a bug in the disassembler constraints used
to lift instructions into pseudo-instructions, whereby
addiw instructions are always lifted to sext.w instead
of just lifting addiw with a zero immediate.
An associated fix has been made to the metadata used to
machine generate the disseasembler:
https://github.com/michaeljclark/riscv-meta/
commit/4a6b2f3898430768acfe201405224d2ea31e1477
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The RISC-V disassembler has no dependencies outside of the 'disas'
directory so it can be applied independently. The majority of the
disassembler is machine-generated from instruction set metadata:
- https://github.com/michaeljclark/riscv-meta
Expected checkpatch errors for consistency and brevity reasons:
ERROR: line over 90 characters
ERROR: trailing statements should be on next line
ERROR: space prohibited between function name and open parenthesis '('
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Clark <mjc@sifive.com>
Paolo Bonzini